What is meaning Changing ALE Inbound Channel Registry...

what is meaning Changing ALE Inbound Channel Registry
can any body give sample scenario.
thx.
sudhakar

Hi,
When inbound IDocs are processed, a unique serial number is generated for each object channel (field CHNUM) and communication link. The ALE layer determines whether a given IDoc can now be posted or whether other IDocs have to be posted first. The serial number for each received IDoc is exactly one whole number lower. Any gaps in the sequence will mean that IDocs are missing, either because the transfer did not work, or because earlier IDocs were not posted successfully.
In this case the IDoc is assigned status 66 and must be posted again with the program RBDAPP01.
Objects are assigned to messages and channels by the application.
Transfer errors (IDoc sequence mixed up) and inbound posting errors (IDoc cannot be posted due to Customizing errors) no longer affect the sequential order, because serialization corrects these errors.
The inbound channel registry is maintained in transaction BD103. The serial counter number should be one less than the IDoc in the queue expected to be processed. PURCHASE ORDER message types come under this category of serialization of IDocs.
~ Bineah.

Similar Messages

What is meaning of Changing ALE Inbound Channel Registry

what is meaning of Changing ALE Inbound Channel Registry, can anybody give sample scenario in real time, if have any documents please send to me
[email protected]

hi
refer to the following link.
http://help.sap.com/saphelp_nw04/helpdata/en/f0/d00c870a6b11d2a5590060087832f8/frameset.htm
You can use some of the std programs/ transactions provided by SAP
BD102                Outbound registry
<b>BD103                Inbound registry</b>
for detailed information
refer to the link below. it contains examples also.
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
regards
ravish
<b>plz reward points if helpful</b>

Please help me to understand what is the meaning of Acess point Channel utilization?

       please help me to understand what is the meaning of Acess point Channel utilization? If i want to mange the capacity of my Office Wi-Fi network what are the factor i need to monitor.

Hi Ankit,
Channel Utilization
The 802.11, 802.11b, and 802.11g standards use the same 2.4 GHz band. All must interoperate with each other, which introduces additional overhead reducing channel throughput. Many sites already have products using the Wi-Fi 2.4 GHz band. Additionally, there are many other products that use the same 2.4 GHz frequencies as used by Wi-Fi. Other products include Bluetooth, cordless phones, video game controllers, surveillance cameras, and microwave ovens.
Before the installation of the Cisco Unified Wireless Network, a site can be tested for channel interference and utilization with tools from AirMagnet, Wild Packets, Cognio, and others. The Wireless Control System (WCS) AP On-Demand Statistics Display report provides a spectrum review of the following:
•Noise by channel
•Interference by channel
•Client count versus RSSI
•Client count versus SNR
•Channel radar detection versus time
You can further refer the following links,
https://supportforums.cisco.com/thread/2212228
https://supportforums.cisco.com/thread/334981
For design guide following link might help,
http://www.cisco.com/en/US/docs/solutions/Enterprise/Education/SchoolsSRA_DG/SchoolsSRA_chap5.html

TS1503 Does anyone know what "other" means in the sync summary bar? I have 850mb using storage space in my iphone and can't understand what that is. I have tried to delete everything, restore to factory settings and change the icloud account. Thanks.

Does anyone know what "other" means in the sync summary bar? I have 850mb using storage space in my iphone and can't understand what that is. I have tried to delete everything, restore to factory settings and change the icloud account. Thanks.

Hi there AnthPy,
You may find the troubleshooting steps in the article below helpful.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
-Griff W.

What are IDOC and ALE?

We are getting a new system that will be interfacing to SAP via IDOC and or ALE
I am required to quickly reply back as far as what will be required from a BASIS side if they will interface using IDOCS and ALEs
Thank YOU and kind Regards!
M.

Hi Maria,
Application Link Enabling (ALE) is a mechanism or u can say that it's a tool for the exchange of business data between loosely-coupled R/3 applications built by customers of SAP, the enterprise resource management program. ALE provides SAP customers with a program distribution model and technology that enables them to interconnect programs across various platforms and systems.That means that ALE can integrate business processes between R/3 Systems and non-R/3 systems as well as between R/3 Systems.
There are three layers in the ALE system:
a)     application services,
b)     distribution services, and
c)     communication services.
The vehicle for data transfer is called an IDoc (intermediate document), which is a container for the application data to be transmitted.
After a user performs an SAP transaction, one or more IDocs are generated in the sending database and passed to the ALE communication layer. The communication layer performs a Remote Function Call (RFC), using the port definition and RFC destination specified by the customer model. The IDoc is transmitted to the receiver, which may be an R/3, R/2, or some external system. If the data is distributed from a master system, the same transaction performed by the sender will be performed by the receiving system, using the information contained in the IDoc.
Changes made to fields in master data tables can be set to trigger distribution of the changes to slave systems, so that multiple database servers can update the same information simultaneously. IDocs carry information directly between SAP systems. In order to communicate with a non-SAP system, an IDoc is first transmitted to an intermediary system that translates the data to a format that will be understood by the receiver. Return data also passes through the translating system, where it is again encapsulated into an IDoc.
Now comes to ur 2nd query basis guys duties over IDOCS & ALE
a)Creating the RFC
b)monitoring different layers over ALE
c)Archiving IDOCS (when required)
d)use the Idoc display tool(we02)
e)use the Idoc Search tool (we09)
f)use the Status Monitor Tool(bd87)
g)Troubleshooting the Inbound Idocsu2026.
Regards,

What is IDOC and ALE?

Hi anybody,
         Please tell me what is IDOC and ALE? What pupose using IDOC and ALE?
          Give me Example sample code of using IDOC and ALE.
Thanks
S.Muthu.

Dear,
Here is some facts which will be helpful to clear yr concepts for ALE/IDOCs.
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
ALE (Application Linking and Enabling)
Ale Technology is SAPs technology to support distributed yet integrated processes across several SAP systems.
Distributed Process:
A distributed process is one in which part of a business process is carried out on one system and part on another. The two systems would exchange data with each other at appropriate points to stay synchronized.
Need for Distributed Process:
Business in Different Geographical Locations.
Non availability of dedicated network.
Cultural and language differences in Geographical locations.
Running of Mission-critical Applications (Like Maintenance downtime etc.).
Separate up gradation of Modules.
Distributed SAP SYSTEM CHALLENGES
A system that understands the syntax and semantics of the data. It was important from the very beginning to base the distribution of data on business rules, not on database replication techniques.
Distributed systems that can maintain their autonomy while being integrated as one logical SAP system. The systems should be able to operate independently and support logical processing of transactions and data.
Distributed systems that can handle different data models. A local implementation should be able to customize the system to meet its local needs.
Receiving systems that can handle their own problems and not tie up the sending system.
Systems that maintain continued operation in spite of network failure. Changes made to either system should be synchronized after the network connection is restored.
A sound technology and methodology that can be used in all distribution scenarios.
SAP Distributed environment:
ALE allows for efficient and reliable communication between distributed processes across physically separate SAP systems.
ALE is based on application to application integration using messaging architecture. A message defines data that is exchanged between two processes. IDocs are containers that hold data exchanged between the two systems.
Benefits of ALE:
Integration with non-SAP systems: ALE architecture allows third party applications to integrate with SAP system.
Reliable Distribution: Once message type created and the receiver of the message is determined, ALE delivers the message to the recipient. If there is any network problem it will buffer the message and delivers the message once the network is restored. It also ensures that the message is not delivered twice.
Release Upgrade: Any of the distributed system can be upgraded to the new release of SAP without affecting the functionality. The ALE layer ensures backward compatibility of messages exchanged between systems.
ALE Architecture:
It consists of an Outbound process, an Inbound process, and an Exception Handling process.
Outbound Process:
ALE Outbound Process in SAP sends data to one or more SAP Systems. It involves four steps.
1. Identify the need of IDoc: This step starts upon creating a application document, can relate to a change to a master data object.
2. Generate the Master IDoc: The document or master data to be sent is read from the database and formatted into an IDoc format. This IDoc is called as a Master IDoc.
3. Generate the Communication IDoc: The ALE Service layer generates a separate IDoc from the Master IDoc for each recipient who is interested in the data. Separate IDocs are generated because each recipient might demand a different version or a subset of the Master IDoc. These recipient-specific IDocs are called Communication IDocs and are stored in the database.
4. Deliver the Communication IDoc: The IDoc is delivered to the recipients using an asynchronous communication method. This allows the sending system to continue its processing without having to wait for the destination system to receiver or process the IDoc.
Inbound Process:
The inbound process receives an IDoc and creates a document in the system.
1. Store the IDoc in the database: The IDoc is received from the sending system and stored in the database. Then the IDoc goes through a basic integrity check and syntax check.
2. Invoke the Posting Module: The control information in the IDoc and configuration tables are read to determine the posting program. The IDoc is then transferred to its posting program.
3. Create the Document: The posting program reads the IDoc data and then creates a document in the system. The results are logged in the IDoc.
IDoc Types:
IDoc type structure can consist of several segments, and each segment can consist of several data fields. The IDoc structure defines the syntax of the data by specifying a list of permitted segments and arrangement of the segments. Segments define a set of fields and their format.
An IDoc is an instance of an IDoc Type and consists of three types of records.
i. One Control record: each IDoc has only one control record. The control record contains all the control information about an IDoc, including the IDoc number, the sender and recipient information, and information such as the message type it represents and IDoc type. The control record structure is same for all IDocs.
ii. One or Many Data records: An IDoc can have multiple data records, as defined by the IDoc structure. Segments translate into data records, which store application data, such as purchase order header information and purchase order detail lines.
iii. One or Many Status records: An IDoc can have multiple status records. Status record helps to determine whether an IDoc has any error.
Message in IDoc Type:
A Message represents a specific type of document transmitted between two partners.
Outbound Process in IDocs:
Outbound process used the following components to generate an IDoc. A customer model, and IDoc structure, selection programs, filter objects, conversion rules, a port definition, an RFC destination, a partner profile, service programs, and configuration tables.
The Customer Model:
A customer model is used to model a distribution scenario. In a customer model, you identify the systems involved in a distribution scenario and the message exchanged between the systems.
Message control:
Message control is a cross application technology used in pricing, account determination, material determination, and output determination. The output determination technique of Message control triggers the ALE for a business document. Message control separates the logic of generating IDocs from the
application logic.
Change Pointers:
The change pointers technique is based on the change document technique, which tracks changes made to key documents in SAP, such as the material master, customer master and sales order.
Changes made to a document are recorded in the change document header table CDHDR, and additional change pointers are written in the BDCP table for the changes relevant to ALE.
IDoc Structure:
A message is defined for data that is exchanged between two systems. The message type is based on one or more IDoc structures.
Selection Program:
Is typically implemented as function modules, are designed to extract application data and create a master IDoc. A selection program exists for each message type. A selection programs design depends on the triggering mechanism used in the process.
Filter Objects;
Filter Objects remove unwanted data for each recipient of the data basing on the recipients requirement.
Port Definition:
A port is used in an outbound process to define the medium in which documents are transferred to the destination system. ALE used a Transactional RFC port, which transfers data in memory buffers.
RFC Destination:
The RFC destination is a logical name used to define the characteristics of a communication link to a remote system on which a function needs to be executed.
Partner Profile:
A partner profile specifies the components used in an outbound process(logical name of the remote SAP system, IDoc Type, message type, TRFC port), an IDocs packet size, the mode in which the process sends an IDoc (batch versus immediate), and the person to be notified in case of error.
Service Programs and Configuration Tables:
The outbound process, being asynchronous, is essentially a sequence of several processes that work together. SAP provides service programs and configuration tables to link these programs and provide customizing options for an outbound process.
Process flow for Distributing Transactional Data:
Transactional data is distributed using two techniques: with Message control and without message control.
Process flow for Distributing Master Data:
Master data between SAP systems is distributed using two techniques: Stand alone Programs and Change Pointers.
Triggering the Outbound Process via Stand-Alone Programs:
Stand-Alone programs are started explicitly by a user to transmit data from one SAP system to another. Standard Programs for several master data objects exist in SAP. Ex. The material master data can be transferred using the RBDSEMAT program or transaction BD10.
The stand-alone programs provide a selection screen to specify the objects to be transferred and the receiving system. After the stand-alone program is executed, it calls the IDoc selection program with the specified parameters.
Triggering the Outbound Process via Change Pointers:
The change pointer technique is used to initiate the outbound process automatically when master data is created or changed.
A standard program, RBDMIDOC, is scheduled to run on a periodic basis to evaluate the change pointers for a message type and start the ALE process for distributing the master data to the appropriate destination. The RBDMIDOC program reads the table TBDME to determine the IDoc selection program for a message type.
Processing in the Application Layer:
The customer distribution model is consulted to make sure that a receiver has been defined for the message to be transmitted. If not, processing ends. If at least one receiver exists, the IDoc selection program reads the master data object from the database and creates a master IDoc from it. The master IDoc is stored in memory. The program then calls the ALE service layer by using the function module MASTER_IDOC_DISTRIBUTE, passing the master IDoc and the receiver information.
Processing in the ALE Interface Layer:
Processing in the ALE Layer consists of the following steps:
Receiver Determination: The determination of the receiver is done through Customer Distribution Model.
IDoc Filtering: if an IDoc filter is specified in the distribution model for a receiver, values in the filter are compared against the values in the IDoc data records. If a data record does not meet the filter criteria, it is dropped.
Segment Filtering: For each sender and receiver combination, a set of segments that are not required can be filtered out.
Field conversion: Field values in data records are converted by using the conversion rules specified for the segment.
Version change for segments: Segments are version-controlled. A new version of a segment always contains fields from the preceding version and fields added for the new version. Release in IDoc type field of the partner profile to determine the version of the segment to be generated.
Version change for IDocs: IDocs are also version controlled. The version is determined from the Basic Type field of the partner profile.
Communication IDocs generated: The final IDoc generated for a receiver after all the conversions and filtering operations is the communication IDoc. One master IDoc can have multiple communication IDocs depending on the number of receivers identified and the filter operations performed. IDoc gets the status record with a status code of 01 (IDoc Created).
Syntax check performed: IDoc goes through a syntax check and data integrity validation. If errors found the IDoc get the status of 26 (error during syntax check of IDoc Outbound). If no errors found the IDoc gets the status 30 (IDoc ready for dispatch ALE Service).
IDoc dispatched to the communication Layer: In the ALE process, IDocs are dispatched using the asynchronous RFC method, which means that the sending system does not await for data to be received or processed on the destination system. After IDocs have been transferred to the communication layer, they get a status code 01 (Data Passed to Port OK).
Processing in the Communication Layer:
To dispatch an IDoc to a destination system, the system reads the port definition specified in the partner profile to determine the destination system, which is then used to read the RFC destination. The RFC destination contains communication settings to log o to the remote SAP system. The sending system calls the INBOUND_IDOC_PROCESS function module asynchronously on the destination system and passes the IDoc data via the memory buffers.
Inbound Process in IDocs:
An inbound process used IDoc structure, posting programs, filter objects, conversion rules, a partner profile, service programs, and configuration tables to post an application document from an IDoc.
Posting Program:
Posting programs, which are implemented as function modules, read data from an IDoc and create an application document from it. A posting program exists for each message. Each posting program is assigned a process code. A process code can point to a function module or a work flow. In the standard program process codes always point to a function module.
Ex. The posting program for message type MATMAS is IDOC_INPUT_MATMAS which has a process code MATM.
Workflow:
A workflow represents a sequence of customized steps to be carried out for a process. The workflow management system is used to model the sequence, identify information required to carry out the steps and identify the person responsible for the dialog steps.
Partner Profile;
A partner profile specifies the components used in an inbound process (partner number, message type, and process code), the mode in which IDocs are processed (batch versus immediate), and the person to be notified in case of errors.
Process flow for the Inbound process via a Function Module:
In this process, IDocs are received from another system and passed to the posting function module directly.
1. Processing in the communication Layer:
The IDOC_INBOUND_ASYCHRONOUS program, triggered as a result of an RFC from the sending system, acts as the entry point for all inbound ALE processes. The IDoc to be processed is passed as an input parameter. Control is transferred to the ALE/EDI layer.
2. Processing in the ALE/EDI Interface Layer:
Basic integrity check: A basic integrity check is performed on the control record.
Segment Filtering and conversion: Filtering out unwanted segments and carry out any required conversion of field values.
Creation of Application IDoc: The application IDoc is created and stored in the database and a syntax check is performed. If there are errors it gets status code of 60 (Error during Syntax check of IDoc Inbound). At this point a tangible IDoc, which can be monitored via one of the monitoring transactions, is created and the IDoc gets status code 50 (IDoc Added).
IDoc Marked ready for Dispatch: IDoc gets the status code 64 (IDoc ready to be passed to application).
IDoc is passed to the posting program: The partner profile table is read. If the value of the Processing field is set to Process Immediately, the IDoc is passed to the posting program immediately using the program RBDAPP01.
3. Processing in the Posting Module:
The process code in the partner profile points to a posting module for the specific message in the IDoc. The posting program implemented as a function module either calls a standard SAP transaction by using the Call Transaction command for posting the document or invokes a direct input function module.
The results of execution are passed back via the function modules output parameters. If the posting is successful IDoc gets the status code 53 (Application Document Posted) or it gets status code 51 (Error: Application
How to create idoc?
*WE30 - you can create a IDOC type
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
This report creates IDocs from the change pointers for the specified message type. It then sends them to the receiving system and flags the change pointers as processed in respect of the specified message type.
The receiving systems for the specified message type are determined from the customer distribution model.
Output:-The report outputs information about the number of master IDocs and communication IDocs created.
RSEOUT00 Process all selected IDocs (EDI) Report for generation of files for EDI outbound processing.The report processes the IDocs available in the system with the status 'to be processed'. The IDocs are selected according to the selection options and parameters specified.
It is important that you make sure that only test messages or productive messages are selected.
The IDocs are processed in various files for various output modes and for various ports. The names of the files are created according to the naming definition for the outbound file. This definition is determined in the port definition.
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
For testing you can use WE19.
Hope This will be helpful,
Best Regards ,
P Singh

IDoc adapter inbound channel: Error Error when reading Exchange Profile

Hello Experts,
Currently i am working on an IDOC to file scenario, in which Data will be sent from ECC server (IDOC) to an FTP server via SAP PI, but when i try to send IDOC to PI, i am getting the following error
in Transaction SM58:-
'IDoc adapter inbound channel: Error Error when reading Exchange Profile for system XID and
client 401 occurred in the IS pipeline' .
Can anyone please help me on this.
Thanks & Regards,
Amit Naik

Hello Experts,
Let me explain to you the whole scenario, We have two servers of PI, 7.1 & 7.0. Now the Java Stack of 7.0 is not working & Cache update of 7.1 is not happening.
Thats why we have linked ABAP stack of 7.0 with Java stack of 7.1. Now we can see the objects created under Java 7.1 in ABAP stack of 7.0 (SXI_CACHE).
Now we have done all the settings to create an IDOC to file scenario. All the RFCs are working fine, but when we send an IDOC from the ECC system to ABAP 7.0, we are getting the following error 'Error while reading exchange profile for system NW' in SM58 .
Now can anyone tell me what exact settings i have to change in the Exchange profile (Java stack of 7.1), so that the Java 7.1 & ABAP 7.0 connection is setup or do i need to change anything else.
Thanks & Regards,
Amit Naik

ALE Inbound Cofiguration Steps needed

Hi friends,
kindly send me ALE Inbound Configuration Steps with all the Mandatory settings that need to be done
Thanks in Advance
Ganesh

Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
Check these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
Please check this PDF documents for ALE and IDoc.
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
Reward points for useful Answers

ALE Inbound steps

Hi All,
What are the step's for ALE inbound process.
Step by step for ALE Congfiguration.
Regards,
Suresh.D

Logical Systems - Change View
Allocate Logical System to Client
Set Up RFC Destination SM59
Define Partner Profile:WE20
Define Port for communication- WE21
Define Customer Model:BD64
Generating Partner profile Transaction : BD82
Activate Change Pointers Globally:BD61
Activate Change Pointer for Message Type: BD50 then go for BD52.
Change ALE Object Type : BD95
Assignment of Object type to Message:BD95
Schedule Program RBDMIDOC to generate IDOCS whenever there is
creation or change in Master Application
Check the IDOC using WE02 or WE05.
Check the Status of the IDOC on both Inbound as well as Outbound side.

Change Windows colors in registry

Hi
Changing Windows colors in registry neither works here
HKCU/Control Panel/Colors
nor here
HKCU/Control Panel/Desktop/Colors
That means for example, that you can change the ActiveBorder color in the usual color dialog box: The registry value does not change in both of the above registry places.
Or
You can change the ActiveBorder color directly in the registry in both of the above registry places: The Windows ActiveBorder color does not change, even after a reboot.
Obviously the color is saved in a different registry-path.
Where exactly the Windows colors are saved in the registry, when you change them manually?
Patrick

Windows7 was the last OS to feature full "Advanced Appearance" dialog. For Windows8, developers aggregated these
controls, providing simplified interface with magnification and themes selection. Sadly, this deferred expert users from genuinely customizing system's appearance. I am unsure
about current development stage, but there is hope that upcoming OS will have these
Advanced Settings incorporated into *.themes files; allowing greater customization power than pre-Win7 and enabling
users to create and share their own system Theme Packs (including backgrounds, screensavers, colors, metrics and their dynamics). If we are lucky, release of application and/or metro-app to facilitate creation, editing and management of Theme Packs should
be in order too.
At present (Windows10
TechPreview) we only have Control Panel page 'Display', providing multi-screen magnification control and some text formatting.
To manually customize colors (and appearance) in Win8, Win8.1 &
TechPreview, refer to article:
Access Advanced Appearance Settings in Windows8 (METHOD
2) Take advice from
Niki and check author's
TIP: better transplant settings from Win7.
MANUAL REGISTRY
EDITING
MISTAKES
MIGHT DAMAGE SYSTEM!!!
For color options see registry entries in:
HKEY_CURRENT_USER\Control Panel\Colors
HKEY_CURRENT_USER\Control Panel\Desktop\Colors
TechNet Library: Descriptions
of other relevant registry entries
Locating USER keys in registry
>>> When finished, reload system for changes to take effect. <<<
Have to agree with Noel: after Bill Gates left, Microsoft was pulled towards sales and monetization. (might be one of those
things transcending Cause&Consequence-Relationship, though). Basic research of company's history would reveal some failed/suspended ideologically ambitious
and technologically progressive projects from 20th century - wish they renew some of those.
With general folks mass-entering digital sphere, last decade had a few good years for social media and
googly entertainment; - for serious IT? -not
so much. At the same time, Intel signed some dubious licenses with Apple, effectively preventing them
from developing PC graphic drivers for PowerVR-sgx5 chips. What later on, combined with Metro resolution limitations and UAC enforcement, was very convenient for MS Surfaces' sales. Thankfully,
now Bill Gates is back and Microsoft has "always so good" future goals, again.
Washington Post - Ensuring Continuous Innovation of Technology
Be the first to get Windows 10 - might be the last OS you install!

What's mean of the object ,tablename,fieldname in transaction bd52?

in bd52,under the name of message type,have some item with name object ,tablename,fieldname,what is mean of them?is it as same as fields in idoc segment?why some message type have items and some have no?do they store value in transmission?
Edited by: p y on May 10, 2008 11:23 AM

hi,
in ale's u hav a method called change pointers in which u can send some data which has to be changed in reciever system,so u hav to define the fields u want to send through change pointers method in BD52.
if already exists no need to give,if not exist just give thm and save.
ex: u hav sent a material from client 100 to 300.
now u want to change basic uom(meins) for tht material thn u define [ material mara meins] in BD52 and save.
thn u follow the remaining steps in change pointer method to send changes in uom from 100 to 300.
reward if hlpful.

How to send Org data from sender system thorugh ALE inbound switch

Hi All,
Could anyone please provide some input for sending the Org Data through ALE inbound switches.
The requirement is to make changes in the distribution model BD64 so that the org data will not be passed in the filter criteria. And when we execute PFAL then the Org data should flow directly to the receiver system through ALE switches.
Thanks in Advance.

Hi,
So first you need to set your distribution model in BD64 (create model views and add message type). Please refer to note 312090 to set your filter settings. After this definition, we have to distribute the source system into the target system (Edit > Model view> distribute). In the target system, we have to generate partner profiles (environment> generate partner profiles).
So you have to create Partner profiles (transaction WE20). The best way is to define for outbound and inbound parameters into source system and target system with message type HRMD_A.
In the source system, we have two options :
-Transfer IDOC immediately
-Collect idocs
In the target system, you have also two options:
-Trigger by background programu2026 means that once datas are distributed, we have to run RBDAPP01 to process   them.
-Trigger immediately (do not have to run any program)
Then after setting this distribution model, please review the way to distribute HR datas :
1- Using transaction PFAL, sending the objects C, O, S successively in Update mode with the infotypes 1000, 1002 and 1028 only, without using evaluation paths (all existing objects).
   => The objects will then be created without relationship, and no error must be reported.
2- Using transaction PFAL, sending the object P in Update mode.
   => As the structure objects are already present, no error message must be generated. If some are, please analyse them, and correct them before the next step.
3- Using transaction PFAL, sending the objects C, O, S successively in Update mode (without restrictions, or only the infotype 1001).
   => The relationships which were not sent in step 1 are then distributed.
4- The changes pointers can now be activated and processed, as the initialization has been done (steps 1 to 3).
Please also check note 550055 for further information,
Hope it helps,
Kind Regards
Christine

I am trying to open iTunes on my mac. But a box pops up saying "The folder iTunes is on a locked disk or you do not have write permissions for this folder". Anyone know what that means? I've had my computer 2 years and its never had a problem opening it

I am trying to open iTunes on my mac. But a box pops up saying "The folder iTunes is on a locked disk or you do not have write permissions for this folder". Anyone know what that means? I've had my computer 2 years and its never had a problem opening it

I've already right-clicked on the application, clicked "get info", and changed it so all people listed in the "Sharing & Permissions" section have the "read & write" privilage.
The error message is referring to your iTunes library, not your iTunes application.
You need to check and fix the permissions of the iTunes folder in your iTunes library. This is by default located in your "Music" folder.
Select the folder Music > iTunes in the Finder, right click on it or Ctrl Click and click "Get Info". At the bottom of the contextual window thatwill pop up, disclose the Sharing and Permissions brick, change your status from Read only to Read & Write. You may need to click the padlock icon to make changes.

TS1717 My itunes won't open and I get message that says "The file iTunes library.itl cannot be read because it was created by a newer version of itunes." I am unsure what this means, but I have uninstalled and reinstalled the itunes, and it still will not

I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.

That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Satellite A500 - What are the changes in BIOS 1.90

Hi,
I own a Satellite A500 PSAR3A-026002. It has BIOS version 1.50, on the Toshiba website it shows the latest version as 1.90. I'd like to know what has been changed from 1.50 to 1.90 but can't find the information anywhere. Just wondering if anyone could tell me the changes or point me to a website that has them.
Not planning on updating BIOS at this stage as everything is running fine, just curious as to what they updated, fixed or added.

Hi Triker,
Which cool features you mean?
BIOS updates means only bug fixing and thats all. Its not known to me that new cool features will be added because features like Virtualization are depending on CPU and chipset. If the hardware doesnt support certain features, they are not supported and BIOS update will not help you.
Of course we can discuss a long time about this but fact is that Toshiba doesnt provide this changelog file and we can do nothing.
If you think its so important, maybe an authorized service provider can help you an answer your question because they have access to Toshiba databases.

What is meaning Changing ALE Inbound Channel Registry...

Similar Messages

Maybe you are looking for