What is meant by freight itam

hi
what is meant by freight item

More then one, of "something". So if the "active" fails, then the "backup" can take over. Depending on exactly what we are talking about, then possibly both can be active at the same time,
sharing the load, and if one fails then the one remaining will do the full load itself.
Thing "something" can be a wide variety of things, since at power agg, disk, network connection, a whole server, a whole disk subsystem, etc. The details regarding architecture etc depends on exactly what
this "something" is.
Tibor Karaszi, SQL Server MVP |
web | blog

Similar Messages

  • What is meant by costing key?

    Dear Experts ,
                          while releasing the billing document to accounts , i am getting  error like
                Valuation with material cost estimate: error, The system looked for the material cost estimate using costing key "002", as defined in the Customizing settings for CO-PA,  incomplete due to FI/CO interface
    what is meant by costing key?
    regards
    rajakarthik

    Hi,
    In Costing based Profitability analysis you define costing keys. A costing key is a set of access parameters which are used in valuation to determine which data in Product cost planning should be read. In the costing key you attach the costing variant.
    In the costing key you specify whether the system should read the current standard cost estimate, the previous standard cost estimate or the future standard cost estimate or a saved cost estimate.
    The configuration settings to determine this costing key is as follows:
    Assign costing keys to the products u2013 Three costing keys can be attached to a single product for a specific point of valuation, record type, plan version.
    Assign costing keys to Material types
    Assign costing keys to any characteristics u2013 You can use your own strategy to determine the costing keys. This is through user defined assignment tables.
    regards,
    Santosh kumar

  • Dispute Case Key (Replicated) (0DPM_D10); what is meant by Replicated?

    Hi everyone,
    I am working on implementing FSCM Dispute Managment module. I have some questions regarding the new standard content provided by SAP for this:
    Earlier I have seen clients using the Stanadard InfoSet 0DPM_I0 for all the Dispute's reporting as it combines data from AR, Dispute Case key and 0Customer. But now I am seeing a bunch of new objects like 0DPM_M10, 0DPM_M20, 0DPM_C10, 0DPM_D10, 0DPM_DCAS_10 etc. provided by SAP as standard content.
    Does any one have any experience with this new content; can anyone explain me how this new content is useful. My client is reluctant against using the standard InfoSet as its is built on two DSO's; I have suggested to build a cube on top of them and can still use an InfoSet to combine AR line items, Disputes, Dispute case key and Customer. Correct me if I am wrong with thid statement.
    Also please let me know what is meant by a Replicated DSO.
    Any comments or suggestions will be greatly appreciated.
    Thanks & Regards,
    SRV

    There are a few things to consider:
         1) The data is stored in deserialized form until it is read. The first read will deserialize the data.
         2) There is some overhead per-entry. 750MB/(3,000,000-30) = ~250 bytes per entry. Some portion of this is attributable to the per-entry overhead.
         3) How did you measure memory usage? Usually invoking <tt>System.gc()</tt> before measuring heap usage will clear garbage but is not guaranteed.
         Jon Purdy
         Oracle

  • What is meant by criteria of Updateability in MDM Import manager

    Hi,
    What is meant by criteria of Updateability in MDM Import manager? i read some information, but i could understand, it says original data source be  updateble. what is meant by Original data source.?
    what is the use of option "Read-only"  in Import manager logon screen.
    Thanks

    Hello Ankam,
    You can check the Read-only option to prevent MDM from updating your data source.
    Kindly see the below information on "DATA SOURCE UPDATES"
    DATA SOURCE UPDATES
    Some MDM Import Manager operations require that the original data source be updateable, thereby allowing new fields and/or entire new tables u2013 and the corresponding data values for each record u2013 to be automatically added to the data source before further processing.
    Other operations simply create virtual fields in the MDM Import Manageru2019s workspace, although if the data source happens to be updateable, some of these operations instead add the new fields to the original data source as well.
    NOTE ►► Updating the data source when possible allows you to
    perform additional operations on the new fields as if they were part of
    the original source data, and also use them as record matching fields.
    NOTE ►► Fields that are added only if the data source is updateable
    can be deleted automatically by the MDM Import Manager when you
    exit or switch data sources based on the setting of the Delete Created
    Fields on Exit configuration option.
    Updateable Data Sources
    Whether or not a data source is updateable depends upon the following:
    u2022 Source type. The source Type must permit the MDM Import Manager to update its schema and insert the additional fields of data; some supported types are updateable and some are not.
    u2022 Media. The media on which the data source resides must itself be updateable. If the media on which the data source resides is readonly, such as a CD-ROM, the data source cannot be updated.
    u2022 Permissions. You must have the proper file system permissions to update the file, or the proper DBMS permissions to update the schema of the database.
    u2022 Read-only option. You cannot have checked the Read-Only option, which prevents MDM from updating the data source even if the other conditions would otherwise permit it.
    NOTE ►► The Read-Only option is: (1) enabled for source types that
    can be updated (Access, Oracle, SQL Server, and XML); (2) disabled
    and unchecked for those that use Access as an updateable staging
    area (Delimited Text and Fixed Text); and (3) disabled and checked for
    those that cannot be updated (Excel and ODBC).
    NOTE ►► When the data source is SQL Server, the table names in
    the database must not contain spaces; otherwise any operation that
    would update the data source will fail.
    Hope this helps.
    Regards,
    Vikas

  • What is meant by 'Business Area'

    Hi all
    what is meant by 'Business Area' in discoverer?
    Because i have installed BI Tools Discoverer Admin and Desktop
    but unable to figure out what Business Area atcually is!!!!
    Thanks in advance
    Regards

    Hi,
    what is meant by 'Business Area' in discoverer?
    Business area is nothing but a set of folders specified to that responsibility.
    Seems your novice so to know concepts of BI and develop discoverer reports follow this user guides which can be downloaded from oracle site.
    [http://download-west.oracle.com/docs/html/B10270_01/toc.htm]
    [http://download.oracle.com/docs/cd/B14504_01/dl/bi/B10272_01/toc.htm]
    Hope this helps you,if anything more feel free to ask we are ready to help you.You will find Discoverer interesting as you go on working with it.Have a nice time working on it.
    Best Wishes,
    Kranthi.
    Edited by: Kranthi.K on Jun 16, 2009 7:29 AM

  • What is meant by stacked list

    hi
    what is meant by stacked list

    Hi Jyothsna,
    A stacked list is a list used in Module Pool programming.
    In an ideal scenario,you will define the screen sequence in either a static or a dynamic way.
    By the statc way,you define the next screen and enter the next screen's value in it.
    By the dynamic way,you code the statement CALL SCREEN XXX where the XXX means the screen number.The dynamic way overrides the static way of defining the screen sequences.
    Now,if you want to insert a screen sequence,i.e a sequence of screens which are not defined in the same ABAP program,you either do it by static or the dynamic way again using the above constructs.
    But in this case,a stack is loaded for a screen sequence and the screens are processed based on the sequence defined in it.
    Before leaving this screen sequence,you should always destroy or delete it usng the keyword LEAVE as it occupies a lot of memory.
    In case you have any further clarifications,do let me know.
    Regards,
    Puneet Jhari.

  • What is meant by noted items

    hi all,
    can any one explain me what is meant by noted items incase of G/l ,AR & AP. as i found this word in FBL3N ,FBL1N & FBL5N also?
    thanks in advance...
    regds,
    raman

    Hi,
    Unlike manual accounting, you  can make certain transaction in SAP which don't have a impact on accounting but are necessary for dicision making or related to any future transactions. These are called Noted items. Noted items are only posted to one side of accounting.
    Eg: If we send a request to customer for down payment, it is not a business transations and have no impact on accounting, but we can pass a entry in SAP for such transaction and it will be a noted item. When actual down payment is received, this noted item is cleared.
    Reward points if answer is helpful.

  • What is meant by qualified advance payment?

    HEllo,,
    what is meant by qualified advance payment. I was reading the SAP help but couldn't understand. so, plz explain in  simple terms.
    Thanks,
    JEss

    Definition:
    With qualified advance payments, payroll takes place for some of the payroll elements in the first payroll run, and is transferred if necessary. The payroll run is not ended. Instead, it receives the Payroll Correction status. During the correction phase, you enter more payroll elements. In the subsequent payroll runs you carry out payroll for these remaining payroll elements and transfer them to your employees. The payroll program only finishes when accounting has been performed for all payroll elements.
    Just do this simple transactions:
    1. Maintain master data, example salary 1000 EUR
    2. Release payroll
    3. Run payroll u2013 will generate /559 1000 EUR (assume no other deduction)
    4. Process Bank Transfer, will generate 1000 EUR, don't forget to set flag for transfer >> employee get payment earlier than it should be, for example get the 1000 EUR in the middle of the month. >> it is qualified advance payment.
    5. Payroll Correction
    6. Change salary to 3000 EUR
    7. Release payroll
    8. Run payroll u2013 will generate /558 2000 EUR (3000-1000) and /564 1000 EUR
    9. Process Bank Transfer again, will generate 2000 EUR. >> normal regular payment, at the end of the month.

  • What is meant by Local Class and how we can create local classes in abap?

    Hi Friends
    what is meant by Local Class and how we can create local classes in abap?
    Regards,
    Sree

    Hi
    Local classes are the classes which we declare and use using the SE38 ABAP editor
    Global classes are the classes which we find in SE24 and call the methods of them into our program.
    see the sample code
    REPORT zs_class.
    SELECTION SCREEN
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
    PARAMETERS:p_var TYPE i,
    p_var1 TYPE i.
    SELECTION-SCREEN END OF BLOCK b1.
    CLASS d_class DEFINITION
    CLASS d_class DEFINITION.
    PUBLIC SECTION.
    METHODS:
    add,
    sub.
    PROTECTED SECTION.
    DATA : var2 TYPE i.
    ENDCLASS. "d_class DEFINITION
    CLASS d_class IMPLEMENTATION
    CLASS d_class IMPLEMENTATION.
    METHOD add.
    var2 = p_var + p_var1.
    WRITE:/ var2.
    ENDMETHOD. "add
    METHOD sub.
    var2 = p_var - p_var1.
    WRITE:/ var2.
    ENDMETHOD. "sub
    ENDCLASS. "d_class IMPLEMENTATION
    START-OF-SELECTION
    START-OF-SELECTION.
    DATA: obj TYPE REF TO d_class.
    CREATE OBJECT: obj .
    CALL METHOD: obj->add,
    Regards
    Anji

  • What is meant by an Activity in Business One

    Hi All,
          What is meant by an Activity in Business One.I studied it in Business One Help,but it is not much helpful.I want a brief description regarding Activities(help me by taking an example).Where this activity used(only in Sales Opportunities and Service modules).
           Help me regarding this or send me the related links that suit to my Question
    Thanks & Regards,
    Saleem

    Maybe I don't understand your question, but I think this is no a SDK issue.
    An activity can be a call, a meeting, a task, any interaction with a customer that you want to keep record.
    So, lets say you have a sales opprotunity, and in the first meeting you came up with a follow up meeting. Then, you open the sales opportunity in SAP, and add an activity for that opportunity, detailing when, where is the meeting, who will go,what do you have to show, etc. You can set a reminder so you don't miss this meeting.
    Hope this helps
    Harold

  • What is meant by locking the audit statistics?

    Hi all,
    I am getting this error in the inbound IDoc ALEAUD "The Audit statistics for sending system E1Q100, receiver system QS1310 and message type ORDERS could not be locked." Status 51, What is meant by locking the Audit statistics?
    Thanks,
    Charles.

    It is basically trying to get a get a database lock on the table BDAUDSTATE to make your status updates but it was not able to.
    See if a lock exists on this table and remove it, or it may also be a case of stepping on the toes that two simultaneous updates are going for the same IDoc.
    It is basically a database lock error.

  • HI what is meant by Floor plan manager?

    HI Gurus....
    Please somebody throw a light on Floor plan manager? why we required this?what is the advantage of it?
    and what is meant by TRACK? what is the need of TRACK?
    Please share the documenst if you have any for the above said topics.
    you can send a document to [email protected]
    Higher points will be rewarded for useful docs
    Thanks in Advance,
    Dharani

    Floor Plan manager is a framework on whcih the ESS / MSS applications aer built. An ESS applications is built on the FPM arcitecture.
    FM arcitecture follows the MVC arcitecture
    As per FPM  each XSS applications has the following three components
    CC    Configuration Component
    FC / BLC     Business logic component
    VC   Visual component.             
    look into SAPs docmentation on the same

  • Hi Iam new to hana I would like to learn the BW powered by HANA can any provide the documents.and I have gone through transports in hana what is meant by delivery unit?

    Hi Iam new to hana I would like to learn the BW powered by HANA can any provide the documents.and I have gone through transports in hana what is meant by delivery unit?

    Hi Sravan,
    Views do not store any data in HANA
    All data resides in tables
    To know how to join tables in Views, watch videos on SAP HANA Academy | SAP HANA
    For BW on HANA check:
    Blog: BW 7.4 on HANA in a Nutshell | SAP HANA
    SAP BW 7.4 SP5 on SAP HANA Overview and Roadmap
    Also follow BW on HANA Space on SCN SAP BW Powered by SAP HANA
    If you want to learn about HANA , check my blog:
    Want to learn SAP HANA?Where to Start?Certification?
    To know more about BW on HANA,check below blog for links to BW on HANA Materials:
    HANA Reference for Developers - Links and SAP Notes(Part-2) Updated 04.12.2013
    Regards,
    Vivek

  • What is meant by contract ?

    hi all,
    I am new to SAP.
    what is meant by contract, pipeline, third-party, sub-contract,consinment ?
    thnks in advance.
    by,
    raghul

    Dear raghul
    -  [Contract]    When you enter into an agreement with some parties for some reason, it may be called as contract which would be valid for a specified period wherein, conditions to be adhered to, would be listed and should be agreed by both the parties.
    -  [Pipeline]     In automobile industry, this is very famous.  A pipeline consists of a chain of processing elements arranged so that the output of each element is the input of the next.  If any work is stopped in between these element, the entire production would come to standstill.  This plays a vital role in major manufacturing industries.
    -  [Third Party]    In third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
    -  [Subcontract]    In  manufacturing industries, it is highly impossible to carry out all operations.  Wherever sensitive operations involved, it will be done inhouse and rest they will have couple of vendors to do that particular operation.  For that particular operation of a component, whatever the vendor incurrs, company will pay the money.
    -  [Consignment]    In case of sales to OEMs (Original Equipment Manufacturers), this plays a major role.  OEMs like Maruti, Suzuki will not place order as and when they require.  Instead, they will release a open order which will be valid for two three years.  Based on this open order, they just release schedules regularly.  What manufacturer should do is to appoint a warehouse agent nearer to the OEMs region and stock the goods ordered by OEMs.  As and when it is required by these OEMs, it will be despatched from these warehouses.
    thanks
    G. Lakshmipathi

  • What is meant by Incentive and Commission mgmt?

    Hi gurus,
    What is meant by Incentive and Commission mgmt in CRM?
    How it is helpful for CRM?
    regards,
    vimal

    Hi Vimal Kumar,
    Go throgh the following link.
    http://help.sap.com/saphelp_crm40/helpdata/en/70/eee1189abe4b8ea1dd77c70c3bfab2/content.htm
    Hope this information helps you.
    Regards
    Nadh.

Maybe you are looking for