What is meant by kick off meeting?
what is meant by kick off meeting?
hi,
its the first step for a project. all the top ppl involved from the client and the IT partner are present. the projct managers make presentations like the scope of the projct, timelines etc.
saurabh
Similar Messages
-
Idvd movie kicks off after 100 photos
Help, first timing using iphoto and idvd. I'm making a movie slideshow for all the people that went on a trip to Hawaii with me. Everytime I burn one it kicks off after the first chapter or first 100 photos. I don't know what to do to fix.
Welcome eyeshine99
Not exactly sure what you mean by "kicks off" but here are a few useful slideshow links:
http://docs.info.apple.com/article.html?artnum=302961
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html
http://lqgraphics.com/phototomovie.php
Hope they Help. -
Trying to download Mavericks I get install_error_distribution_signed_by_Apple. then I get kicked off to Lion troubleshooting,I meet the requirements what the h***?
Try this thread, it worked for me: https://discussions.apple.com/message/22873594#22873594
-
What is twin sign? what kick off (in implementation project)
what is twin sign? what kick off (in implementation project)
regards
ramanaHi,
Twin Sign means Both the CLIENT and the COMPANY(IMPLEMENTING) signing on the Project papers by defining various project related things.
Once it is signed the Project Will KICK OFF means literally starts,
With the required resources, software and hardware.
Regards,
Anji -
What is twin sing? what kick off in implementation project
what is twin sing? what kick off in implementation project
regards
ramanaHi,
Twin Sign means Both the CLIENT and the COMPANY(IMPLEMENTING) signing on the Project papers by defining various project related things.
Once it is signed the Project Will KICK OFF means literally starts,
With the required resources, software and hardware.
Regards,
Anji -
I keep getting kicked off internet and have airport extreme, what can fix?
I keep getting kicked off airport extreme on my new Macbook Air-- what are possible reasons and solutions?
Interference...
PowerCycle the extreme for now and see if it does any difference. -
Clusterware 10g: what kicks off 3rd-party failover script?
I am trying to use Oracle Clusterware 10g (installed on two identical Dell Linux boxes,
OEL 5.2) to failover a 3rd-party application, specifically websphere MQ. I have a ksh
script that is supposed to start/stop/restart the application.
Clusterware will fail over the IP address fine to the other box if I yank the primary box's
cable, but the app itself doesn't fail over. If I knew what (in Clusterware) did the
"kicking off" of the ksh script I could troubleshoot it more. I used the instructions in:
http://www.oracle.com/technology/products/database/clusterware/pdf/TWP-Oracle-Clusterware-3rd-party.pdf
and I'm pretty sure I did it right.
Any ideas?Here is the action script:
#!/bin/ksh
LOG="/san1/var/mqm/config/Controlmq.log"
echo "script started at `date` from `hostname`" >> $LOG
############################### func_stopMQ ######################################
func_stopMQ () {
QUEUENAME=$1
while [[ `ps -ef | grep $QUEUENAME | grep -v grep | grep -v Control| awk {'print $2'} | wc -l` -gt 1 ]]
do
echo "DEBUG : `ps -ef | grep $QUEUENAME | grep -v grep | grep -v Control` " >> $LOG
echo "there are `ps -ef | grep $QUEUENAME | grep -v grep | grep -v Control| awk {'print $2'} | wc -l` processes running associated with $QUEUENAME on `hostname`" >> $LOG
endmqm $QUEUENAME
endmqlsr -m $QUEUENAME
## echo "sleeping for 10 seconds before checking again"
sleep 10
done
## echo "All set, there are no processes associated with $QUEUENAME "
echo "stopped $QUEUENAME at `date` from `hostname`" >> $LOG
return 0
################################ func_startMQ ######################################
func_startMQ () {
QUEUENAME=$1
case $QUEUENAME in
MECM|MEQM)
PORT=1414
MEQA|MEQB)
PORT=5077
esac
## echo "starting $QUEUENAME"
strmqm $QUEUENAME
sleep 5
## echo "STARTING listener for $QUEUENAME"
runmqlsr -t tcp -p $PORT -m $QUEUENAME &
sleep 5
runmqsc $QUEUENAME < /san1/var/mqm/config/startCH_$QUEUENAME.DEF
echo "started $QUEUENAME at `date` from `hostname`" >> $LOG
return 0
################################ func_checkMQ ######################################
func_checkMQ () {
QUEUENAME=$1
PROCESSCOUNT=`ps -ef | grep $QUEUENAME | grep -v grep| grep -v Control| awk {'print $2'} | wc -l`
if [ $PROCESSCOUNT > 1 ]
then
echo "there are $PROCESSCOUNT processes associated with $QUEUENAME" >> $LOG
echo ":::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::" >> $LOG
echo "Status of $QUEUENAME : " >> $LOG
runmqsc $QUEUENAME < /san1/var/mqm/config/ChannelStatus.DEFS
return 0
else
echo "there are $PROCESSCOUNT processes associated with $QUEUENAME" >> $LOG
echo ":::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::" >> $LOG
echo "Status of $QUEUENAME : " >> $LOG
runmqsc $QUEUENAME < /san1/var/mqm/config/ChannelStatus.DEFS
return 1
fi
ACTION=$1
# QUEUENAME=$2
case $ACTION in
start)
## func_startMQ MECM
## func_startMQ MEQA
func_startMQ MEQM
func_startMQ MEQB
stop)
## func_stopMQ MECM
## func_stopMQ MEQA
func_stopMQ MEQM
func_stopMQ MEQB
check)
## func_checkMQ MECM
## func_checkMQ MEQA
func_checkMQ MEQB
echo "Sorry, the proper usage for this command is ControlMQ.sh start|stop|check"
exit
esac -
I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?
Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this. -
Any suggestions on Initial Project Planning & Kick-Off
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/forums">Paul Wilson</a> suggested that we start a series of discussions for the different phases of the SAP OCM process.
In response to Pauls suggestion, I am kicking off a thread on this topic. Others threads on the other phases will follow.
The process steps for Initial Project Planning & Kick-Off from Paul's prior posting are listed below.
1.1 Initial Project Planning and Kick-Off
1.1.1 Transition from Discovery and Evaluation
1.1.1.2 Review Discovery and Evaluation Documents
1.1.2 Enterprise Strategy Framework
1.1.2.1 Review All Required Strategic Documentation
1.1.2.2 Conduct Executive Workshops
1.1.2.4 Review Workshop Results
1.1.4 Project Charter
1.1.4.6 Develop Organizational Change Strategy
Any suggestions on what has worked well would be appreciated. Also, feel free to include things that have been tried that were less than successful.
From a real world perspective, I would be interested in discussing to whom and how Change Strategy has been presented by other OCM Consultants. I would also be interested in discovering how often OCM Consultants actually conduct Executive Workshops during this phase of the project.
I am looking forward to learning and sharing with the group.
Caryl Barclay
SAP OCM Change Management PrincipalHi Caryl,
I have not had extensive experience ( >1 ) but heres my input. I may be missing some info but hope this helps someone.
Typically during the project Initiation phase, we work on getting the project charter, business case, Scope Statement, Project plan schedule etc.
So with respect to OCM, during the prep/initiation/kick off stage -
1) Producing Change Charter This helps to set the framework for the OCM. The Change Charter sets ambition, scope and initial attributes of the organizational change process for the entire project.
Key Deliverables during this step are OCM Plan, Purpose and Objectives
2) Business Readiness - provides the decision makers with an initial assessment of the readiness of the business to embark on the project given the scope of change defined in the business case (deliverable from Project Initiation). The assessment comprises a high level view on which stakeholders will be impacted and how dramatic the change is going to be seen from the business organizations side. We would try to include any information on the company's previous change experiences.
Key Deliverables during this step
a) Initial impact assessment
b) Stakeholder map and business readiness. (we would need to conduct meetings, interview etc )
3) Change Management Organization Defining change management organization is a very important as it sets the guidelines on how the proj org should be set up to meet the objectives in change charter. It helps to ensure that our leadership forces driving the changes to the business are leveraged to the maximum potential. In addition, it sets the direction for the OCM team to support the program sponsors and steering committee members in a structured manner.
Key Deliverables during this step Sponsorship Strategy (high level document).
4) Communication plan- The communication framework defined here will be followed through the project lifecycle. Hence this is a very critical step in the OCM Initial/Kick off Phase. Typically one would need to identify the target audience and align them with the initial stakeholder mapping/impact assessment, work with the client teams to find out the messaging strategy guidelines if any (if they dont have then define one), Identify communication feedback loops, and the timeline/key messages for all communications throughout the project.
Key Deliverables :
a) Communication Plan
b) Communication Strategy and Framework.
5) Organizational Alignment Strategy - ensures that considerations has been made as regards to how radical changes to processes and organization the program sponsors wants to allow or encourage in order to achieve a coherent design of system, process and organization. If Organizational Alignment strategy is given low priority, the project team will end up in in-efficient discussions Or some times totally ignores the aspect of organizational alignment with a resulting gap between the system set-up and the processes by which the company is actually run. So, the business will still be operating but will miss out on realizing the full business benefits of the project. O rganizational Alignment Strategy Document is the key deliverable at this point. -
I have been having trouble getting into my podcasts after restoring my itunes library to an earlier library, every time I select podcast i am kicked off itunes with an error send/dont send pop up however I can acess the podcasts when sinking my ipod only
Hello there, danbucfan.
It seems that you were referred to us from the very article that provides steps for troubleshooting your issue. Although they may seem extensive, these steps will help pinpoint where the issue lies:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
If you continue to get the error, please feel free to provide the exact error message, to see if that sheds further light on what your issue may be.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Payables Transfer to General Ledger does not kick off Journal Import
Hello,
This is on 11.5.10.2.
We have some invoice batches that are not posted in GL. This problem is sporadic and only happens for some batches and not all. It is unclear to why some batches are posted fine and others are not.
The problem is at payable trasnfer to General Ledger program. After these batches are validated and create accounting has been executed successfully, we submit Payables Trsnfer to General Ledger program.
This program does not kick of Journal Import child process for these batches. It just completes normally without showing any error detail on log/output.
What could be the reason? Why Payables Transfer to General Ledger is not kicking off Journal Import for these batches?
I have even verified GL_INTERFACE and there is nothing there.
Please advise.
Thanks
DAre these invoices accounted, and was create accounting done for these Invoices?
If so these should be available for the import. -
Auto-kick off MaxL script after Oracle GL data load?
Hi guys, this question will involve 2 different modules: Hyperion and Oracle GL.
My client has their accounting department updating Oracle GL on a daily basis. My end-user client would like to write a script to automatically kick off the existing MaxL script which is for our daily data load in Hyperion. Currently, the MaxL script is manually executed.
What's the best approach to build a connection for both modules to communicate with each other? Can we use a timer to trigger the run? If so, how?#1 External scheduler.
I've worked on Appworx and it has build a chain dependent task. There are many other external schedulers like Tivoli,....
#2 As Daniel pointed out you can use Windows scheduler.
For every successful GL load add a file to a folder which is accessible for your Essbase task.
COPY Nul C:\Hyperion\Scripts\Trigger\GL_Load_Finished.txt
Create another bat file which is scheduled to run on every 5 or 10 mins (this should start just after your GL Load scheduled task)
This is an example i've for a triggered Essbase job.
IF EXIST %BASE_DIR%\Trigger\Full_Build_Started.txt (
Echo "Full Build started"
) else (
IF EXIST %BASE_DIR%\Trigger\Custom_Build_Started.txt (
Echo "Custom Build started"
) else (
IF EXIST %BASE_DIR%\Trigger\Post_Build_Batch_Started.txt (
Echo "Post Build started"
) else (
IF EXIST %BASE_DIR%\Trigger\Start_Full_Build.txt (
Echo "Trigger found starting batch"
MOVE %BASE_DIR%\Trigger\Start_Batch.txt %BASE_DIR%\Trigger\Full_Build_Started.txt
call %BASE_DIR%\Scripts\Batch_Files\Monthly_Build_All_Cubes.bat
) else (
IF EXIST %BASE_DIR%\Trigger\Start_Custom_Build.txt (
Echo "Trigger found starting Custom batch"
MOVE %BASE_DIR%\Trigger\Start_Custom_Batch.txt %BASE_DIR%\Trigger\Custom_Build_Started.txt
call %BASE_DIR%\Scripts\Batch_Files\Monthly_Build_All_Cubes_Custom.bat
) else (
IF EXIST %BASE_DIR%\Trigger\Start_Post_Build_Batch.txt (
Echo "Trigger found starting Post Build batch"
MOVE %BASE_DIR%\Trigger\Start_Post_Build_Batch.txt %BASE_DIR%\Trigger\Post_Build_Batch_Started.txt
call %BASE_DIR%\Scripts\Batch_Files\Monthly_Post_Build_All_Cubes.bat
)So this bat file if it finds Start_Full_Build.txt in the trigger location, it'll rename that to Full_Build_Started.txt and will call the Full Build (likewise for custom and post build)
Regards
Celvin
http://www.orahyplabs.com -
How to kick off workflow from Web Dynpro?
Hi,
I have abap experience but haven't used workflow before. I have to kick off a workflow from a java web dynpro.
I think that I need to set up a business object and an event within this object, as step one. I then go to Status Management in the Business Workflow as I need to establish a relationship between the web dynpro and my event, step two.
The question is, what Status Object type do I use in this Status Management? For example if I was releasing a production order I could set this to ORH.
Any advice greatly appreciated.
Regards,
Warren.Hello Warrenabap,
Do you know how to send (or modify) the container values from a workflow ?? -
What is meant by an Activity in Business One
Hi All,
What is meant by an Activity in Business One.I studied it in Business One Help,but it is not much helpful.I want a brief description regarding Activities(help me by taking an example).Where this activity used(only in Sales Opportunities and Service modules).
Help me regarding this or send me the related links that suit to my Question
Thanks & Regards,
SaleemMaybe I don't understand your question, but I think this is no a SDK issue.
An activity can be a call, a meeting, a task, any interaction with a customer that you want to keep record.
So, lets say you have a sales opprotunity, and in the first meeting you came up with a follow up meeting. Then, you open the sales opportunity in SAP, and add an activity for that opportunity, detailing when, where is the meeting, who will go,what do you have to show, etc. You can set a reminder so you don't miss this meeting.
Hope this helps
Harold -
Kicking off a workflow via Event
Hi. How do you kick off a workflow via Event? I created a simple workflow with start--assign--stop. I created an event and subscription but when i raise it nothing happens.
the workflow though runs when i use the launch process. What am i missing? I read an article that says the start node should be a receive event, but i couldnt find that in the owb workflow builder.
Thanks for you help in advance.I think you could start your WF by setting the viewOptions.process attribute to your WF name, in the User Form you are using. When the WF is finished, control returns to the Form.
For instance.
<Field name='viewOptions.process'>
<Default>
<s>My Load From File WF</s>
</Default>
</Field>
Maybe you are looking for
-
When I create a text message from my contact on my iphone 5, the contacts mobile number appears and not there name. But when they respond to my text, is shows up as a new text message with there name. How do I fix this?
-
Network Searching or No Service All the time in my new iPhone 4S
Suggestion required how can I sort out the problem of No Service or Network Searchin all the time in my new iPhone 4S? It's really horrible to have iPhone in hand could not able to use that. Solve It soon.. Needs support on this issue.. Getting mad..
-
Missing Java Web Start after 1.4.2 SDK install??
After doing the full 1.4.2 SDK install on Windows XP SP 1 there is no sign of Java Web Start (no desktop icon, no obvious folder, etc)! Further the appropriate extensions do not seem to be mapped. The installed completed without errors and in other r
-
SAP Sd interview qns with answers
Hi Guru's I have to appear for interview within 2-3 days. can somebody send me SAP SD interview questions with answers at my email address [email protected] to revise and prepare. Points will be rewarded. Thanks in advance Sheenam Gupta
-
Hello, After one installation of cluster software (with problem) I try to install one more time, but the last installation of cluster software leaves some data on my raw devices (for OCR and Voting Disk I use direct raw devices without OCFS, for data