What is meant by locking the audit statistics?
Hi all,
I am getting this error in the inbound IDoc ALEAUD "The Audit statistics for sending system E1Q100, receiver system QS1310 and message type ORDERS could not be locked." Status 51, What is meant by locking the Audit statistics?
Thanks,
Charles.
It is basically trying to get a get a database lock on the table BDAUDSTATE to make your status updates but it was not able to.
See if a lock exists on this table and remove it, or it may also be a case of stepping on the toes that two simultaneous updates are going for the same IDoc.
It is basically a database lock error.
Similar Messages
-
While processing ALEAUD - "Error when locking the audit statistics"
Hello,
I am sending out IDOC for HR data and then prcessing ALEAUD inbound idoc immediatley (setting is done in WE21 partner profiles).
While processing these incomming idocs, I am getting this error "Error when locking the audit statistics for P01LOGSYS1 IMTIMEDEP HRMD_A" for few idocs. e.g. out of 1000 for 100 idocs this error will happen and IDOC goes to status 51.
If I try to process thes idocs ALEAUD using background processing and if I schedule 2 jobs at a time then I will get same error and IDOC goes to status 51.
Can someone help me out?Hi
I tried processing the idocs in background processing as you have suggested using program RBDAPP01 (inbound).
There are 2 options in this program serial processing and parallel processing. When I select serial processing everyhting goes smooth but it takes long time. But when I select parallel processing I get same locking error mentioned above and only few idocs will get processed successfully with status 53 and all other will error out with status 51.
If I schedule 2 different jobs in background program RBDAPP01 (inbound) using serial processing then same thing will happen. only few idocs will get processed successfully with status 53 and all other will error out with status 51.
And I will get locking error ....
Note 1333417 says, " these IDocs will be processed via background runs of report RBDAPP01 \ RSEOUT00 (using background work processes) in batch mode leaving dialog work processes free for users and mission-critical processes. Hence you will not encounter the resources problems you are currently experiencing. The only other option would be to try increasing the number of available dialog work processes. The number of dialog processes must be greater than or equal to the total of the number of update and background processes per application server and must be configured across all operation mode
switches (see SAP note 74141). *However when there are a large number of IDocs being processed this is not a practical solution."*
Does that mean there is no possoble solution for this issue. If I increase dialog work processes will it be helpfull ? -
Hi,
I have a scenario SAP --idoc-> PI JMS>
The IDOC is branched into 12 JMS message and an audit (ALEAUD) is sent back to SAP for each inbound JMS message.
Everything is working fine except that some of the ALEAUD IDOC going back to SAP stays in status 51 with the error:
" Error when locking the audit statistics "
Half the ALEAUD are successfull (Status = 53) and the other half is in error (Status = 51)
Any idea?
Thanks,
MartinHi Martin,
Check Note 573991 - COM: ALEAUD IDocs for several objects of one message type
Kind regards,
Caio Cagnani -
Technical content for the BI statistics
Hi Guru's
What is technical content for the BI statistics and where do I find this???
I want to know what is the procedure to know which query is mostly executed in the system and by how many users.
Thanks & Regards.Hi,
What is technical content for the BI statistics and where do I find this???
you can enable this facility
go to RSA1> tools >bw statistics>here we have two options like OLAP,WHM ,if you chk OLAP for the respective cube,now it will display all the related infromation i.e all the details of the queries pertaining to the cube
WHM will store all related data staging related information
want to know what is the procedure to know which query is mostly executed in the system and by how many users
the below cubes will meet your requirement
0BWTC_C10_Q011 OLAP Use per User
0BWTC_C10_Q506 OLAP Use per User (Total Number of Records)
0BWTC_C10_Q505 OLAP Use per User (Total Time)
0BWTC_C10_Q503 OLAP Use per User (Time)
chk the below link
http://help.sap.com/saphelp_nw04/helpdata/en/88/3e1f3b5839e10fe10000000a114084/content.htm
Once you install technical content you can use the features of BW statistics etc..
Cheers,
Swapna.G -
What exactly the auditing team will or should check in my database.
Dear all,
i am using oracle 10g database on windows server 2003 and oracle application server 10g on windows server 2003.
now an internal auditing team is going to audit my database.
i want to know what they will audit so that i do preparation for it.
thanksi am using oracle 10g database on windows server 2003 and oracle application server 10g on windows server 2003.
now an internal auditing team is going to audit my database.
i want to know what they will audit so that i do preparation for it.
There is no way to know without knowing what type of 'audit' they are going to audit for.
1. access security? who has access to the physical hardware? how is that access managed (granted/revoked/documented)?
2. data security? who has access to the data in the database? how is that access managed? what levels of access are implemented?
3. financial? what controls are in place to monitor/log/track transactions that affect security has been implemented
The biggest step you can take to 'prepare' is to either find, or create, documentation about the system components.
ANYTHING that you tell them that isn't backed up by company approved and documented procedures is a security risk. No competent auditor is simply going to take anyone's word for an issue that is part of an audit.
The next step you can take is to be prepared to DEMONSTRATE that what you describe has, in fact, been implemented.
The third step during the actual audit is DON'T LIE! If you don't know an answer just say so. If a particular feature hasn't been implemented, or you know it has problems, just say so. Remember - anything you say can be EASILY verified if they choose to do so.
Get caught in a lie and you WILL pay the price, one way or the other.
There are reasons management has decided to audit your database. You may, or may not, know what those reasons are. If they are looking to dump you they are going to dump you no matter how good the audit turns out. But if they are looking for problem areas that need to be corrected this is your opportunity to make them aware of those areas since that can be used to justify getting the money you need to address them.
Got no backup server? That risks losing valuable corporate data and causing problems for users. So document that there is no backup server and the risks involved. That gives you a chance to seek money for a backup server. And so on. Use the audit as an opportunity to make a sales pitch for needing new hardware, software and people to get the job done. -
If you bought the iPod touch from somebody and then you locked yourself out of it what should I do because the guy didn't give me his iTunes password?
Sounds like the Activation Lock (iOS 7) is working as designed. It determs theft since y have to know the APple ID's passward to use/restore the iPod foro use. Unless you can get the password you have a nice but thin brick. Likely the iPod was stolen
-
What does the error "Unable to lock the following files:" mean?
What does the error "Unable to lock the following files:" mean? After the colon in this error message, a path to the .icml file is listed. We are using InDesign CS6 with InCopy CS6 (Mac), assignment-based workflow, on a shared server.
Thanks,
Gita MSounds like a permissions issue on that server.
Bob -
What is the T-code to lock the VA01
What is the T-code to lock the VA01
Hi,
For any std. SAP T-codes, while implementation or support - normally t-codes
are alloted for the end users based upon the authorizations and roles..wherein
authorizations like create/change/display would be alloted depended upon the user
roles..when comibined all those corresponding authorization basis persons would
generate the User Role which would be again consider for generating the user profiles..so, this way, any SAP Std. or User Defined T-codes would be controlled.
Hope this helps..
assign points if useful..
Cheers,
Pattan. -
Hi Iam new to hana I would like to learn the BW powered by HANA can any provide the documents.and I have gone through transports in hana what is meant by delivery unit?
Hi Sravan,
Views do not store any data in HANA
All data resides in tables
To know how to join tables in Views, watch videos on SAP HANA Academy | SAP HANA
For BW on HANA check:
Blog: BW 7.4 on HANA in a Nutshell | SAP HANA
SAP BW 7.4 SP5 on SAP HANA Overview and Roadmap
Also follow BW on HANA Space on SCN SAP BW Powered by SAP HANA
If you want to learn about HANA , check my blog:
Want to learn SAP HANA?Where to Start?Certification?
To know more about BW on HANA,check below blog for links to BW on HANA Materials:
HANA Reference for Developers - Links and SAP Notes(Part-2) Updated 04.12.2013
Regards,
Vivek -
On garageband 10.0.1 i locked the tracks on a project and now can't unlcok them. What to do?
Does the track lock show in the Track heads? If not, use the Track manu to show the Track locks. in the Track header
Tracks > Track header > Show track locks.
When the locks are showing in te Track headers, press them to disable them.
-- Léonie -
I changed my 4 digit password to lock the screen and forgot what I changed it to. Now phone is disabled and says connect to itunes. Has this ever happened to anybody? How can I fix this? I share my phone bill with my mom and my itunes account with my husband? I have all the apple ID's if needed
http://support.apple.com/kb/HT1808
-
Hi,
This was not what I meant.
The requirement is:
Drag and drop any one of specific list of components say x, y,z in the parsys
Only after the drag and drop of these components other components can be dragged to the parsys. So we can say that the parsys should allow only the specific components to be added first and only after that other components can be added.
Thanks ,
DiptiHi there
I'm guessing that you mean to ask if one is able to force a user to perform a drag-and-drop as part of a simulation?
Unless you program it in Flash or some other application it isn't avaiable. Check the link below for more.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
The seller did not restore the phone and when I tried to do it manually it locked the phone and is now asking for the login info in order to do anything with the phone. I contacted the seller and he is not responding. What do i do?
he knows his ID , if he did all whats in the link he can get his password back ?
how can i make him call applecare ? is there a way to speak to them from jordan ??
i have been trying to reach any1 in apple so they can communicate and help my friend (us) to make him remember it .
am not asking for the password or trying to get into the phone without using it , and i can take my money back though i need to help my friend as well since now he cant use it as well.
thanks kil -
What is meant by the term redundancy in respect to High availability?
What is meant by the term redundancy in respect to High availability?
More then one, of "something". So if the "active" fails, then the "backup" can take over. Depending on exactly what we are talking about, then possibly both can be active at the same time,
sharing the load, and if one fails then the one remaining will do the full load itself.
Thing "something" can be a wide variety of things, since at power agg, disk, network connection, a whole server, a whole disk subsystem, etc. The details regarding architecture etc depends on exactly what
this "something" is.
Tibor Karaszi, SQL Server MVP |
web | blog -
What is meant by " Grade Point Average "?The following answer is correct?
what is meant by " Grade Point Average "?
Grade Point Average = grades for assignments and then using the points/grades of classes. Is it correct?
Thanks and Regards
mohideenGrade Point Average (GPA) is typically a term used in upper schools and universities. It is the average of the grades of all your classes. 4 is the top GPA.
Regards,
Brandye Barrington
Certification Forum Moderator
Maybe you are looking for
-
Update Sale Order Header Text through Enhancement
Hi Experts, I Have a requirement to update the sale order Header Text , when the sale order is opened in VA02 and saved. Here in I tried using edit_text, it updates sale order header text directly in DB during run time even before the save
-
Various problems since Mavericks update
Since doing the Mavericks update a few days ago, I'm having a few issues with seemingly unrelated programs. 1) Quicksilver Works perfectly except for the triggers (shortcuts) that act on selected text. Eg normally I could select the word 'text' in th
-
We are wondering if we can use airplay monitoring to share screens from a single macbook to multiple apple tv's. We want to "broadcast" the same screen to monitors in different rooms Thanks for the help.
-
In the Account Analysis Report Payables, currency precissions are not refle
Hi All, In the Account Analysis Report Payables, currency precissions are not reflected propely. The functional currency is KWD (Precission - 3). In the standard report (Account Analsyis Report) parables application, the output is shown in 2 decimals
-
Facing Problem while Displaying Russian words using HTP.TableData
Hi, We are storing russian words in DB.While displaying these words, it is not displaying proerly.we are using "HTP.TableData" to display russian characters in the front end.Please suggest the solution to display russian words proeprly