What is meant by registering a Queue

Hi all,
What is meant by registering a queue and how exactly it is done?
best regards,
Kulwant

Have a look at
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/59e837d3-0201-0010-c096-dc1869733413
http://help.sap.com/saphelp_nw2004s/helpdata/en/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/827440c36ed562e10000000a155106/content.htm
thanks,
pooja
Message was edited by:
Pooja Pandey

Similar Messages

What is meant by administered objects in jms

what is meant by administered objects in jms..
and
is this Analogy true : JMS Provider like JDBC Driver
or JMS Provider like DBMS(IBM MQ)
what that provider is.....

In my previous job I was developer/administrator etc for the was environment and although I don't know if there are any hard and fast rules to what administered objects are I classed anything that get created in WAS as adminstered objects so that would be the likes of:
JMS Queues
JMS Queue Connection Factories
Datasources
J2C Aliases
JDBC Providers e.g. Sybase driver
In the case of WAS 6+ then that would also include your service integration buses, foreign MQ buses etc.
Basically anything that you can script using wsadmin
Hope that helps.
Matt

What is meant by costing key?

Dear Experts ,
while releasing the billing document to accounts , i am getting error like
Valuation with material cost estimate: error, The system looked for the material cost estimate using costing key "002", as defined in the Customizing settings for CO-PA, incomplete due to FI/CO interface
what is meant by costing key?
regards
rajakarthik

Hi,
In Costing based Profitability analysis you define costing keys. A costing key is a set of access parameters which are used in valuation to determine which data in Product cost planning should be read. In the costing key you attach the costing variant.
In the costing key you specify whether the system should read the current standard cost estimate, the previous standard cost estimate or the future standard cost estimate or a saved cost estimate.
The configuration settings to determine this costing key is as follows:
Assign costing keys to the products u2013 Three costing keys can be attached to a single product for a specific point of valuation, record type, plan version.
Assign costing keys to Material types
Assign costing keys to any characteristics u2013 You can use your own strategy to determine the costing keys. This is through user defined assignment tables.
regards,
Santosh kumar

Dispute Case Key (Replicated) (0DPM_D10); what is meant by Replicated?

Hi everyone,
I am working on implementing FSCM Dispute Managment module. I have some questions regarding the new standard content provided by SAP for this:
Earlier I have seen clients using the Stanadard InfoSet 0DPM_I0 for all the Dispute's reporting as it combines data from AR, Dispute Case key and 0Customer. But now I am seeing a bunch of new objects like 0DPM_M10, 0DPM_M20, 0DPM_C10, 0DPM_D10, 0DPM_DCAS_10 etc. provided by SAP as standard content.
Does any one have any experience with this new content; can anyone explain me how this new content is useful. My client is reluctant against using the standard InfoSet as its is built on two DSO's; I have suggested to build a cube on top of them and can still use an InfoSet to combine AR line items, Disputes, Dispute case key and Customer. Correct me if I am wrong with thid statement.
Also please let me know what is meant by a Replicated DSO.
Any comments or suggestions will be greatly appreciated.
Thanks & Regards,
SRV

There are a few things to consider:
     1) The data is stored in deserialized form until it is read. The first read will deserialize the data.
     2) There is some overhead per-entry. 750MB/(3,000,000-30) = ~250 bytes per entry. Some portion of this is attributable to the per-entry overhead.
     3) How did you measure memory usage? Usually invoking <tt>System.gc()</tt> before measuring heap usage will clear garbage but is not guaranteed.
     Jon Purdy
     Oracle

What is meant by criteria of Updateability in MDM Import manager

Hi,
What is meant by criteria of Updateability in MDM Import manager? i read some information, but i could understand, it says original data source be updateble. what is meant by Original data source.?
what is the use of option "Read-only" in Import manager logon screen.
Thanks

Hello Ankam,
You can check the Read-only option to prevent MDM from updating your data source.
Kindly see the below information on "DATA SOURCE UPDATES"
DATA SOURCE UPDATES
Some MDM Import Manager operations require that the original data source be updateable, thereby allowing new fields and/or entire new tables u2013 and the corresponding data values for each record u2013 to be automatically added to the data source before further processing.
Other operations simply create virtual fields in the MDM Import Manageru2019s workspace, although if the data source happens to be updateable, some of these operations instead add the new fields to the original data source as well.
NOTE ►► Updating the data source when possible allows you to
perform additional operations on the new fields as if they were part of
the original source data, and also use them as record matching fields.
NOTE ►► Fields that are added only if the data source is updateable
can be deleted automatically by the MDM Import Manager when you
exit or switch data sources based on the setting of the Delete Created
Fields on Exit configuration option.
Updateable Data Sources
Whether or not a data source is updateable depends upon the following:
u2022 Source type. The source Type must permit the MDM Import Manager to update its schema and insert the additional fields of data; some supported types are updateable and some are not.
u2022 Media. The media on which the data source resides must itself be updateable. If the media on which the data source resides is readonly, such as a CD-ROM, the data source cannot be updated.
u2022 Permissions. You must have the proper file system permissions to update the file, or the proper DBMS permissions to update the schema of the database.
u2022 Read-only option. You cannot have checked the Read-Only option, which prevents MDM from updating the data source even if the other conditions would otherwise permit it.
NOTE ►► The Read-Only option is: (1) enabled for source types that
can be updated (Access, Oracle, SQL Server, and XML); (2) disabled
and unchecked for those that use Access as an updateable staging
area (Delimited Text and Fixed Text); and (3) disabled and checked for
those that cannot be updated (Excel and ODBC).
NOTE ►► When the data source is SQL Server, the table names in
the database must not contain spaces; otherwise any operation that
would update the data source will fail.
Hope this helps.
Regards,
Vikas

What is meant by 'Business Area'

Hi all
what is meant by 'Business Area' in discoverer?
Because i have installed BI Tools Discoverer Admin and Desktop
but unable to figure out what Business Area atcually is!!!!
Thanks in advance
Regards

Hi,
what is meant by 'Business Area' in discoverer?
Business area is nothing but a set of folders specified to that responsibility.
Seems your novice so to know concepts of BI and develop discoverer reports follow this user guides which can be downloaded from oracle site.
[http://download-west.oracle.com/docs/html/B10270_01/toc.htm]
[http://download.oracle.com/docs/cd/B14504_01/dl/bi/B10272_01/toc.htm]
Hope this helps you,if anything more feel free to ask we are ready to help you.You will find Discoverer interesting as you go on working with it.Have a nice time working on it.
Best Wishes,
Kranthi.
Edited by: Kranthi.K on Jun 16, 2009 7:29 AM

What is meant by stacked list

hi
what is meant by stacked list

Hi Jyothsna,
A stacked list is a list used in Module Pool programming.
In an ideal scenario,you will define the screen sequence in either a static or a dynamic way.
By the statc way,you define the next screen and enter the next screen's value in it.
By the dynamic way,you code the statement CALL SCREEN XXX where the XXX means the screen number.The dynamic way overrides the static way of defining the screen sequences.
Now,if you want to insert a screen sequence,i.e a sequence of screens which are not defined in the same ABAP program,you either do it by static or the dynamic way again using the above constructs.
But in this case,a stack is loaded for a screen sequence and the screens are processed based on the sequence defined in it.
Before leaving this screen sequence,you should always destroy or delete it usng the keyword LEAVE as it occupies a lot of memory.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

What is meant by noted items

hi all,
can any one explain me what is meant by noted items incase of G/l ,AR & AP. as i found this word in FBL3N ,FBL1N & FBL5N also?
thanks in advance...
regds,
raman

Hi,
Unlike manual accounting, you can make certain transaction in SAP which don't have a impact on accounting but are necessary for dicision making or related to any future transactions. These are called Noted items. Noted items are only posted to one side of accounting.
Eg: If we send a request to customer for down payment, it is not a business transations and have no impact on accounting, but we can pass a entry in SAP for such transaction and it will be a noted item. When actual down payment is received, this noted item is cleared.
Reward points if answer is helpful.

What is meant by qualified advance payment?

HEllo,,
what is meant by qualified advance payment. I was reading the SAP help but couldn't understand. so, plz explain in simple terms.
Thanks,
JEss

Definition:
With qualified advance payments, payroll takes place for some of the payroll elements in the first payroll run, and is transferred if necessary. The payroll run is not ended. Instead, it receives the Payroll Correction status. During the correction phase, you enter more payroll elements. In the subsequent payroll runs you carry out payroll for these remaining payroll elements and transfer them to your employees. The payroll program only finishes when accounting has been performed for all payroll elements.
Just do this simple transactions:
1. Maintain master data, example salary 1000 EUR
2. Release payroll
3. Run payroll u2013 will generate /559 1000 EUR (assume no other deduction)
4. Process Bank Transfer, will generate 1000 EUR, don't forget to set flag for transfer >> employee get payment earlier than it should be, for example get the 1000 EUR in the middle of the month. >> it is qualified advance payment.
5. Payroll Correction
6. Change salary to 3000 EUR
7. Release payroll
8. Run payroll u2013 will generate /558 2000 EUR (3000-1000) and /564 1000 EUR
9. Process Bank Transfer again, will generate 2000 EUR. >> normal regular payment, at the end of the month.

Changing up what happens at the 'select resource - queued' step

Greetings!
So, I'm curious .. we'd like to change how we do things regarding what happens at the select resource - queued step. Our current state is a series of business checks, place the call on hold, play CUCM MOH, take the call off hold, go back to the queue loop and repeat.
To change things up I'd like to play some royalty-free music as a prompt instead of putting the call on hold. I would use boolean flags to keep track of what prompts have played so callers do not hear the same wav file over and over and over. So, I'm thinking of doing something like this ...
At the queued step ..
play a prompt
begin the queue loop
     business check
     agent check
     play royalty-free (RF) music clip 1 (45 sec)
     play informational prompt 1 (15 sec)
     opt-out check
go back to the queue loop
2nd time through ..
     business check
     agent check
     play RF 2 (45 sec)
     play info 2 (15 sec
     opt-out check
3rd time ...
     business check
     agent check
     play RF 3 (45 sec)
     play info 3 (6 sec)
     opt-out check
4th time ...
     business check
     agent check
     play RF 4 (45 sec)
     play info 4 (6 sec)
     opt-out check
And maybe one more time playing these types of prompts before we switch to placing the call on hold and playing CUCM MOH. Generally, most calls are answered before the five minute mark, however, we do have outliers who wait a very long time. Playing CUCM MOH might be the appropriate thing to do for those rare instances?
I'm curious if anyone else has tried this and am hoping for some feedback?
Thanks!
Keith

Hi
There's nothing wrong with doing it that way. I've seen a few customers play music from prompts rather than holding; it's easier to maintain/change that way.
Aaron

What is meant by Local Class and how we can create local classes in abap?

Hi Friends
what is meant by Local Class and how we can create local classes in abap?
Regards,
Sree

Hi
Local classes are the classes which we declare and use using the SE38 ABAP editor
Global classes are the classes which we find in SE24 and call the methods of them into our program.
see the sample code
REPORT zs_class.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:p_var TYPE i,
p_var1 TYPE i.
SELECTION-SCREEN END OF BLOCK b1.
CLASS d_class DEFINITION
CLASS d_class DEFINITION.
PUBLIC SECTION.
METHODS:
add,
sub.
PROTECTED SECTION.
DATA : var2 TYPE i.
ENDCLASS. "d_class DEFINITION
CLASS d_class IMPLEMENTATION
CLASS d_class IMPLEMENTATION.
METHOD add.
var2 = p_var + p_var1.
WRITE:/ var2.
ENDMETHOD. "add
METHOD sub.
var2 = p_var - p_var1.
WRITE:/ var2.
ENDMETHOD. "sub
ENDCLASS. "d_class IMPLEMENTATION
START-OF-SELECTION
START-OF-SELECTION.
DATA: obj TYPE REF TO d_class.
CREATE OBJECT: obj .
CALL METHOD: obj->add,
Regards
Anji

What is meant by an Activity in Business One

Hi All,
What is meant by an Activity in Business One.I studied it in Business One Help,but it is not much helpful.I want a brief description regarding Activities(help me by taking an example).Where this activity used(only in Sales Opportunities and Service modules).
Help me regarding this or send me the related links that suit to my Question
Thanks & Regards,
Saleem

Maybe I don't understand your question, but I think this is no a SDK issue.
An activity can be a call, a meeting, a task, any interaction with a customer that you want to keep record.
So, lets say you have a sales opprotunity, and in the first meeting you came up with a follow up meeting. Then, you open the sales opportunity in SAP, and add an activity for that opportunity, detailing when, where is the meeting, who will go,what do you have to show, etc. You can set a reminder so you don't miss this meeting.
Hope this helps
Harold

What is meant by locking the audit statistics?

Hi all,
I am getting this error in the inbound IDoc ALEAUD "The Audit statistics for sending system E1Q100, receiver system QS1310 and message type ORDERS could not be locked." Status 51, What is meant by locking the Audit statistics?
Thanks,
Charles.

It is basically trying to get a get a database lock on the table BDAUDSTATE to make your status updates but it was not able to.
See if a lock exists on this table and remove it, or it may also be a case of stepping on the toes that two simultaneous updates are going for the same IDoc.
It is basically a database lock error.

HI what is meant by Floor plan manager?

HI Gurus....
Please somebody throw a light on Floor plan manager? why we required this?what is the advantage of it?
and what is meant by TRACK? what is the need of TRACK?
Please share the documenst if you have any for the above said topics.
you can send a document to [email protected]
Higher points will be rewarded for useful docs
Thanks in Advance,
Dharani

Floor Plan manager is a framework on whcih the ESS / MSS applications aer built. An ESS applications is built on the FPM arcitecture.
FM arcitecture follows the MVC arcitecture
As per FPM each XSS applications has the following three components
CC    Configuration Component
FC / BLC     Business logic component
VC   Visual component.
look into SAPs docmentation on the same

Hi Iam new to hana I would like to learn the BW powered by HANA can any provide the documents.and I have gone through transports in hana what is meant by delivery unit?

Hi Iam new to hana I would like to learn the BW powered by HANA can any provide the documents.and I have gone through transports in hana what is meant by delivery unit?

Hi Sravan,
Views do not store any data in HANA
All data resides in tables
To know how to join tables in Views, watch videos on SAP HANA Academy | SAP HANA
For BW on HANA check:
Blog: BW 7.4 on HANA in a Nutshell | SAP HANA
SAP BW 7.4 SP5 on SAP HANA Overview and Roadmap
Also follow BW on HANA Space on SCN SAP BW Powered by SAP HANA
If you want to learn about HANA , check my blog:
Want to learn SAP HANA?Where to Start?Certification?
To know more about BW on HANA,check below blog for links to BW on HANA Materials:
HANA Reference for Developers - Links and SAP Notes(Part-2) Updated 04.12.2013
Regards,
Vivek

What is meant by registering a Queue

Similar Messages

Maybe you are looking for