What is meant by seamless integration?

What is meant by Seamless Integration using XI ?
When we use BAPI technology for Integration between SAP and Non-SAP systems, the flat file concept comes into picture.
I do accept that the maintainance of this kind of point to point (BAPI) interface is pretty complex and labourious.
But how XI will comeover this issue....????
Can anyone explain me about this...????
Regards
Pavan

>>But how XI will comeover this issue....????
Designing Scenarios like.
IDoc -
> XI -
> IDOC
IDoc -
> XI -
> File
File  -
> XI -
> IDOC
RFC -
> XI -
> File
File -
> XI -
> RFC
File -
> XI -
> File
Proxy -
> XI -
> File
File -
> XI -
> Proxy
Webservice -
> XI -
> IDoc.. Bla Bla Bla............ !!!
Regards
San

Similar Messages

  • What is meant by referential integrity

    hi
    what is meant by referential integrity

    Hi,
    Referential integrity is the property that guarantees that values from one column depend on values from another column. This property is enforced through integrity constraints.
    If you set this flag a check for referential integrity is performed for this InfoObject, against the master data table or ODS object. The InfoObject is checked for valid characteristic values.
    It is used when v r doing Flexi update...
    Prerequisites for checking for referential integrity:
    Data is updated flexibly
    You have activated error handling in the BW scheduler (Tab page Update)
    On the Update tab page in the BW scheduler, you have selected the option Always update data, even when no master data exists for the data.
    send ur id, i will send u screen shot of ref.integrity
    regards
    reena

  • What is meant by cost element

    hi
    what is meant by cost element

    HI.
    Differentiation of Cost Elements
    Use
    In call management, it is necessary to differentiate cost elements further for the settlement of orders in profitability analysis. Both the costs incurred and the sales deductions are classified according to their source, and assigned to the appropriate cost elements. For example, the following costs are differentiated:
    Sales costs
    Warranty costs
    Good will costs
    Sales deductions due to warranty
    Sales deductions due to good will
    The differentiation of costs and sales deductions enables you to assess more accurately the profitability of your products.
    Integration
    The differentiation of cost elements is only of use if the service orders are settled in profitability analysis.
    Prerequisites
    Resource-related billing must be performed for service orders.
    You must have defined the accounting indicator in Customizing for Plant Maintenance.
    When you create a service order, you define the accounting indicator in the header, under administrative data. Currently it is only possible to have one accounting indicator per order.
    Once the order is released, the accounting indicator can no longer be changed in the order header.
    Features
    When actual postings are made for a service order, the system creates CO single records and a CO totals record. When doing this, it copies the accounting indicator defined in the order header, and enters it in the origin of the totals or single records.
    In addition to the variance class and the cost element, the accounting indicator is a further characteristic of the PA transfer structure.
    The transfer of the accounting indicator to the origin also makes it possible during the settlement of a service order in profitability analysis, to navigate more specifically in the PA transfer structure. The costs and sales deductions for warranty, good will, and sales are entered in the respective value fields.
    Reward all helpfull answers.
    Regards.
    Jay

  • What is meant by administered objects in jms

    what is meant by administered objects in jms..
    and
    is this Analogy true : JMS Provider like JDBC Driver
    or JMS Provider like DBMS(IBM MQ)
    what that provider is.....

    In my previous job I was developer/administrator etc for the was environment and although I don't know if there are any hard and fast rules to what administered objects are I classed anything that get created in WAS as adminstered objects so that would be the likes of:
    JMS Queues
    JMS Queue Connection Factories
    Datasources
    J2C Aliases
    JDBC Providers e.g. Sybase driver
    In the case of WAS 6+ then that would also include your service integration buses, foreign MQ buses etc.
    Basically anything that you can script using wsadmin
    Hope that helps.
    Matt

  • Seamless Integration Between Weblogic and Oracle Portal Server

    Hi,
    Can someone please give me some insight into Seamless integration from Weblogic Portal Server to Oracle Portal Server.
    The Scenario is as:
    A user logs into the Weblogic Portal, this Portal desktop displays some portlets. Links on these portlets navigate the user to the portlets deployed on Oracle Portal.
    Is this feasible, and what version of the 2 servers would support this feature.
    Can someone please snd across online resources which deal with my doubt.
    many Tx.
    Regards,
    Mukta

    You might want to consider using WSRP to aggregate portlets deployed on
    Oracle into WLP. Check edocs and dev2dev for some info on WSRP in WLP.
    You can use 8.1 SP3 or later.
    Check with Oracle to find out which version of their product offers WSRP
    support.
    Subbu
    Mukta Shetye wrote:
    Hi,
    Can someone please give me some insight into Seamless integration from Weblogic Portal Server to Oracle Portal Server.
    The Scenario is as:
    A user logs into the Weblogic Portal, this Portal desktop displays some portlets. Links on these portlets navigate the user to the portlets deployed on Oracle Portal.
    Is this feasible, and what version of the 2 servers would support this feature.
    Can someone please snd across online resources which deal with my doubt.
    many Tx.
    Regards,
    Mukta

  • What is meant by costing key?

    Dear Experts ,
                          while releasing the billing document to accounts , i am getting  error like
                Valuation with material cost estimate: error, The system looked for the material cost estimate using costing key "002", as defined in the Customizing settings for CO-PA,  incomplete due to FI/CO interface
    what is meant by costing key?
    regards
    rajakarthik

    Hi,
    In Costing based Profitability analysis you define costing keys. A costing key is a set of access parameters which are used in valuation to determine which data in Product cost planning should be read. In the costing key you attach the costing variant.
    In the costing key you specify whether the system should read the current standard cost estimate, the previous standard cost estimate or the future standard cost estimate or a saved cost estimate.
    The configuration settings to determine this costing key is as follows:
    Assign costing keys to the products u2013 Three costing keys can be attached to a single product for a specific point of valuation, record type, plan version.
    Assign costing keys to Material types
    Assign costing keys to any characteristics u2013 You can use your own strategy to determine the costing keys. This is through user defined assignment tables.
    regards,
    Santosh kumar

  • Dispute Case Key (Replicated) (0DPM_D10); what is meant by Replicated?

    Hi everyone,
    I am working on implementing FSCM Dispute Managment module. I have some questions regarding the new standard content provided by SAP for this:
    Earlier I have seen clients using the Stanadard InfoSet 0DPM_I0 for all the Dispute's reporting as it combines data from AR, Dispute Case key and 0Customer. But now I am seeing a bunch of new objects like 0DPM_M10, 0DPM_M20, 0DPM_C10, 0DPM_D10, 0DPM_DCAS_10 etc. provided by SAP as standard content.
    Does any one have any experience with this new content; can anyone explain me how this new content is useful. My client is reluctant against using the standard InfoSet as its is built on two DSO's; I have suggested to build a cube on top of them and can still use an InfoSet to combine AR line items, Disputes, Dispute case key and Customer. Correct me if I am wrong with thid statement.
    Also please let me know what is meant by a Replicated DSO.
    Any comments or suggestions will be greatly appreciated.
    Thanks & Regards,
    SRV

    There are a few things to consider:
         1) The data is stored in deserialized form until it is read. The first read will deserialize the data.
         2) There is some overhead per-entry. 750MB/(3,000,000-30) = ~250 bytes per entry. Some portion of this is attributable to the per-entry overhead.
         3) How did you measure memory usage? Usually invoking <tt>System.gc()</tt> before measuring heap usage will clear garbage but is not guaranteed.
         Jon Purdy
         Oracle

  • What is meant by criteria of Updateability in MDM Import manager

    Hi,
    What is meant by criteria of Updateability in MDM Import manager? i read some information, but i could understand, it says original data source be  updateble. what is meant by Original data source.?
    what is the use of option "Read-only"  in Import manager logon screen.
    Thanks

    Hello Ankam,
    You can check the Read-only option to prevent MDM from updating your data source.
    Kindly see the below information on "DATA SOURCE UPDATES"
    DATA SOURCE UPDATES
    Some MDM Import Manager operations require that the original data source be updateable, thereby allowing new fields and/or entire new tables u2013 and the corresponding data values for each record u2013 to be automatically added to the data source before further processing.
    Other operations simply create virtual fields in the MDM Import Manageru2019s workspace, although if the data source happens to be updateable, some of these operations instead add the new fields to the original data source as well.
    NOTE ►► Updating the data source when possible allows you to
    perform additional operations on the new fields as if they were part of
    the original source data, and also use them as record matching fields.
    NOTE ►► Fields that are added only if the data source is updateable
    can be deleted automatically by the MDM Import Manager when you
    exit or switch data sources based on the setting of the Delete Created
    Fields on Exit configuration option.
    Updateable Data Sources
    Whether or not a data source is updateable depends upon the following:
    u2022 Source type. The source Type must permit the MDM Import Manager to update its schema and insert the additional fields of data; some supported types are updateable and some are not.
    u2022 Media. The media on which the data source resides must itself be updateable. If the media on which the data source resides is readonly, such as a CD-ROM, the data source cannot be updated.
    u2022 Permissions. You must have the proper file system permissions to update the file, or the proper DBMS permissions to update the schema of the database.
    u2022 Read-only option. You cannot have checked the Read-Only option, which prevents MDM from updating the data source even if the other conditions would otherwise permit it.
    NOTE ►► The Read-Only option is: (1) enabled for source types that
    can be updated (Access, Oracle, SQL Server, and XML); (2) disabled
    and unchecked for those that use Access as an updateable staging
    area (Delimited Text and Fixed Text); and (3) disabled and checked for
    those that cannot be updated (Excel and ODBC).
    NOTE ►► When the data source is SQL Server, the table names in
    the database must not contain spaces; otherwise any operation that
    would update the data source will fail.
    Hope this helps.
    Regards,
    Vikas

  • What is meant by 'Business Area'

    Hi all
    what is meant by 'Business Area' in discoverer?
    Because i have installed BI Tools Discoverer Admin and Desktop
    but unable to figure out what Business Area atcually is!!!!
    Thanks in advance
    Regards

    Hi,
    what is meant by 'Business Area' in discoverer?
    Business area is nothing but a set of folders specified to that responsibility.
    Seems your novice so to know concepts of BI and develop discoverer reports follow this user guides which can be downloaded from oracle site.
    [http://download-west.oracle.com/docs/html/B10270_01/toc.htm]
    [http://download.oracle.com/docs/cd/B14504_01/dl/bi/B10272_01/toc.htm]
    Hope this helps you,if anything more feel free to ask we are ready to help you.You will find Discoverer interesting as you go on working with it.Have a nice time working on it.
    Best Wishes,
    Kranthi.
    Edited by: Kranthi.K on Jun 16, 2009 7:29 AM

  • What is meant by stacked list

    hi
    what is meant by stacked list

    Hi Jyothsna,
    A stacked list is a list used in Module Pool programming.
    In an ideal scenario,you will define the screen sequence in either a static or a dynamic way.
    By the statc way,you define the next screen and enter the next screen's value in it.
    By the dynamic way,you code the statement CALL SCREEN XXX where the XXX means the screen number.The dynamic way overrides the static way of defining the screen sequences.
    Now,if you want to insert a screen sequence,i.e a sequence of screens which are not defined in the same ABAP program,you either do it by static or the dynamic way again using the above constructs.
    But in this case,a stack is loaded for a screen sequence and the screens are processed based on the sequence defined in it.
    Before leaving this screen sequence,you should always destroy or delete it usng the keyword LEAVE as it occupies a lot of memory.
    In case you have any further clarifications,do let me know.
    Regards,
    Puneet Jhari.

  • What is meant by noted items

    hi all,
    can any one explain me what is meant by noted items incase of G/l ,AR & AP. as i found this word in FBL3N ,FBL1N & FBL5N also?
    thanks in advance...
    regds,
    raman

    Hi,
    Unlike manual accounting, you  can make certain transaction in SAP which don't have a impact on accounting but are necessary for dicision making or related to any future transactions. These are called Noted items. Noted items are only posted to one side of accounting.
    Eg: If we send a request to customer for down payment, it is not a business transations and have no impact on accounting, but we can pass a entry in SAP for such transaction and it will be a noted item. When actual down payment is received, this noted item is cleared.
    Reward points if answer is helpful.

  • What are the steps for integration FI to PP

    hai
    what are the steps for integration with FI to PP
    Thanks & regards,
    PG BABU

    Hi,
    Integration is with CO and PP
    In CO, Cost Centers are Created using T.code KS01.
    In CO, Activity Types are created using T.Code KL01.
    Both should be combined Using T.code KP26.
    Cost Centers are assigned to Work Centers using T.Code CR02.
    Please let me know if you need more information.
    Assign points if useful.
    Regards
    Sridhar M

  • What is meant by qualified advance payment?

    HEllo,,
    what is meant by qualified advance payment. I was reading the SAP help but couldn't understand. so, plz explain in  simple terms.
    Thanks,
    JEss

    Definition:
    With qualified advance payments, payroll takes place for some of the payroll elements in the first payroll run, and is transferred if necessary. The payroll run is not ended. Instead, it receives the Payroll Correction status. During the correction phase, you enter more payroll elements. In the subsequent payroll runs you carry out payroll for these remaining payroll elements and transfer them to your employees. The payroll program only finishes when accounting has been performed for all payroll elements.
    Just do this simple transactions:
    1. Maintain master data, example salary 1000 EUR
    2. Release payroll
    3. Run payroll u2013 will generate /559 1000 EUR (assume no other deduction)
    4. Process Bank Transfer, will generate 1000 EUR, don't forget to set flag for transfer >> employee get payment earlier than it should be, for example get the 1000 EUR in the middle of the month. >> it is qualified advance payment.
    5. Payroll Correction
    6. Change salary to 3000 EUR
    7. Release payroll
    8. Run payroll u2013 will generate /558 2000 EUR (3000-1000) and /564 1000 EUR
    9. Process Bank Transfer again, will generate 2000 EUR. >> normal regular payment, at the end of the month.

  • What is meant by Local Class and how we can create local classes in abap?

    Hi Friends
    what is meant by Local Class and how we can create local classes in abap?
    Regards,
    Sree

    Hi
    Local classes are the classes which we declare and use using the SE38 ABAP editor
    Global classes are the classes which we find in SE24 and call the methods of them into our program.
    see the sample code
    REPORT zs_class.
    SELECTION SCREEN
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
    PARAMETERS:p_var TYPE i,
    p_var1 TYPE i.
    SELECTION-SCREEN END OF BLOCK b1.
    CLASS d_class DEFINITION
    CLASS d_class DEFINITION.
    PUBLIC SECTION.
    METHODS:
    add,
    sub.
    PROTECTED SECTION.
    DATA : var2 TYPE i.
    ENDCLASS. "d_class DEFINITION
    CLASS d_class IMPLEMENTATION
    CLASS d_class IMPLEMENTATION.
    METHOD add.
    var2 = p_var + p_var1.
    WRITE:/ var2.
    ENDMETHOD. "add
    METHOD sub.
    var2 = p_var - p_var1.
    WRITE:/ var2.
    ENDMETHOD. "sub
    ENDCLASS. "d_class IMPLEMENTATION
    START-OF-SELECTION
    START-OF-SELECTION.
    DATA: obj TYPE REF TO d_class.
    CREATE OBJECT: obj .
    CALL METHOD: obj->add,
    Regards
    Anji

  • What is meant by an Activity in Business One

    Hi All,
          What is meant by an Activity in Business One.I studied it in Business One Help,but it is not much helpful.I want a brief description regarding Activities(help me by taking an example).Where this activity used(only in Sales Opportunities and Service modules).
           Help me regarding this or send me the related links that suit to my Question
    Thanks & Regards,
    Saleem

    Maybe I don't understand your question, but I think this is no a SDK issue.
    An activity can be a call, a meeting, a task, any interaction with a customer that you want to keep record.
    So, lets say you have a sales opprotunity, and in the first meeting you came up with a follow up meeting. Then, you open the sales opportunity in SAP, and add an activity for that opportunity, detailing when, where is the meeting, who will go,what do you have to show, etc. You can set a reminder so you don't miss this meeting.
    Hope this helps
    Harold

Maybe you are looking for

  • How can i check if the lines are the same ?

    private bool displayed; private void PostMessage() for (int i = 0; i < ScrollLabel._lines.Length; i++) for (int x = 0; x < WordsList.words.Length; x++) if (ScrollLabel._lines[i].Contains(WordsList.words[x]) && !displayed) displayed = true; lineToPost

  • Remove water mark in the footer Register for FREE at ...

    I have a stand alone application, I can create PDF documents using Crystal JRC, But I'm getting the message 'Register for FREE at www.businessobjects.com/eclipse to remove this message'. How could we remove this message. I'm not using CRConfig.xml fi

  • I cannot download the latest version of itunes onto my iPhone 4S

    Why can I not download the latest version of iTunes onto my iPhone 4S?

  • Advice on how to approach?

    hi, i have a method that creates tab-seperated lines of data for bulk SQL loads. Each line has different lengths, depending on the data. Right now i am dealing with this by allocating a ByteBuffer with way more bytes than i need. When i'm done creati

  • Business Line URGENT

    Hi guys A local business is closing down next week and im iterested in taking over the shop they have, however I would like to keep their existing number.  I have contacted the exisiting tenants of the shop and they said they would not sign the numbe