What is meant by Selection, Hide,Inversion and Field only during Datasource

Dear Mates,
During Datasource Generation in LO extraction , I can see the tabs
Slection
Hidefield
Inversion
Fild only.
Can any on please explain me elobarately each of them.
Thanks,
Sudha

If you do a F1 on each you'll have a description, but here is a summary:
Selection: You want to be able to select a value in this characteristic through the infopackage
Hide: You don't want to be able to see this field.
Inversion: For a key figure, change sign.  1 becomes -1 and vice versa.
Field Only:  Field is available only for user exits and such but is not extracted.
Hope this helps.

Similar Messages

  • Regarding Selection,hide,inversion,etc............

    Hi,
                 I worked on LO extraction DS "2LIS_11_VAITM".In maintain DS screen  4 tabs  are there right....
                     selection,hide,inversion and field only in customer exit.some fields are selected, and i didn't hide the remaing fileds....ok but some fields are come to bw side and some fields are not come to  bw side,what is the reason?
    and one more how to select the inversion fields in bw side?
    Thank u

    Hi Devi,
    The fields that are marked as hidden and fields only in the user exit do not reflect on BW system when you replicated. Only the fields for which these boxes are not checked are visible in BW system.
    Regarding the inversion checkbox, this is what the help says.
    The field is inverted in the case of reverse posting. This means that it is multiplied by (-1). For this, the extractor has to support a delta record transfer process, in which the reverse posting is identified as such. If the option Field recognized only in Customer Exit is chosen for the field, this field is not inverted. You cannot activate or deactivate inversion if this option is set.
    Hope it helps.
    Thanks and Regards
    Subray Hegde

  • Selection, Hide, Inversion, Field only

    Hi All,
       Give me clarity on Selection,Hide,Invesion,Field only on customer exit. When we use these check boxes? Give me detailed of information on that.
    1)Selection.
    2)Hide
    3)Invesion
    4)Field only on customer exit.
    Regards,
    Shwetha Reddy.

    hi,
    1.Selection of a Field of a DataSource
    Selection field for a DataSource
    Use
    Set this indicator to use a field from the DataSource as the selection field in the Scheduler for BW.
    Due to the properties of the DataSource, not every field can be used as a selection field. In this case, the property is not changeable.
    2. Hide Extract Structure Field
    Use
    To exclude a field in the extraction structure from the data transfer, set this flag. The field is then no longer available in BW for determining transfer rules and therefore cannot be used for generating transfer structures.
    3. inversion
    Field Inverted When Cancelled (*-1)
    The field is inverted in the case of reverse posting. This means that it is multiplied by (-1). For this, the extractor has to support a delta record transfer process, in which the reverse posting is identified as such.
    If the option Field recognized only in Customer Exit is chosen for the field, this field is not inverted. You cannot activate or deactivate inversion if this option is set.
    4. field only
    Flag Relevant RNOTECREL
    The indicator Field known only in Exit is set for the fields in an append structure, meaning that by default, these fields are not passed to the extractor in the field list and the selection table.
    Procedure
    Remove the Field known only in Exit indicator, to get the Service API to pass the field in the append structure to the extractor
    hope this help you
    regards
    Harikrishna N

  • Why 1: Type selected in yellow and 2: only one panel stays open?

    In Design CS4. G5 Mac. Final Tiger.
    1. I was setting some type to be force justified L/R. Several lines of centered type. Most of it, not all of it, became selected in solid yellow. I did not do the selecting. I could not find the answer in either of two ID reference books.
    I checked the Prefs several times, and the only thing I found that MIGHT relate to this is "Keeps." (Preferences > Composition > Keeps Violations/H&J Violations.) Though it says nothing about color choice nor about what it signifies. I know what pink signifies, but not what yellow does.
    2. Asked about this next problem before and was told about Workspaces and was told about grouping panels, neither answering the question as I recall. So let me try again.
    I have panel A open. It may be alone as Panel A or in a group with Panel B and maybe even with Panel C. Doesn't matter. But now I want to open Panel D. As soon as I click on Panel D, Panel A (alone or grouped) disappears. So my question is: Can I/how can I keep more than one panel open at the same time, grouped or single being 100% irrelevant? How can I keep Panel A and Panel D open at the same time as separate, not grouped, panels?
    I tried to ask clearly. My experience is it is most efficient (in Adobe Forums and in real life) to be clear about what you do want and equally clear about what you do not.  —Thank you.

    1. Yellow highlight is, I believe, substituted glyphs. Is the affected type all caps or samll caps, perchance, or non-default figures? You usually see this with ligatures, but small caps is pretty common, too.
    2. Do you have auto-collapse panels selected inthe prefs? This one would help to see a screen shot, I think. If the panels are docked, you must expand the dock to panel width or only one group (and a group can be one panel) will expand from the icon state at a time.

  • What are the Manual check Deposit Tables and  Fields(FF68)

    Hi Gurus,
    I have reqirement to get get Details about  SlipNO,Cheque NO,Cheque Date,Posting Date,
    Party code,Bank key,Currency ,Amount,Bank Account,Value Date,Entry Date,Banker's name.
    could u help me
    Thanks in Advance
    Sivakumar.

    Hi,
    Yes it doesn't.  Where do you store this information when you are posting in FF68, can you tell me the field names or where exactly do you see these fields.
    For check deposit, you can design your own layout and field text in the layout will not be exactly what you will see in the table.  I think that must be the case in your scenario. 
    Suggest look at the layout configuration from Transaction code OT45, open the variant you use (you can find that from the FF68 screen, menu option Settings --> specifications).
    Also, pick one already posted check deposit in FF68 and look for the values you are interested in for that statement in tables FEBKO and FEBEP.
    There are other tables in Banking but I do not think they would be of much use like FEBCL, FEBRE and FEBVW.  FEBVW will give you the bank name where you are depositing the slip.
    Cheers.

  • Reader 11 --Forms and Fields only is gone

    Earlier programs allowed me to print a form w/o the background by going to Print>Comments and Forms> Form fields only,
    Reader 11 does not give me that option. Now when clicking on Comments and Forms I have:
    Documents--
    Documents and Markups
    Documents and stamps.
    All of them print with the background. Where di 'form fields only' go?
    TIA.

    So I ended up un-installing reader and rebooted. Acrobat now seems to open in a seperate window and the form fields only option is there when trying to print.
    Thanks alot.

  • What would you think if SCN hides points and displays only your badges and current level?

    Hi
    After recent change or improvement I must say, in SCN gamification and points system I just came up with an idea that what if SCN hides points completely and calculate and maintain them just they way they are being calculated now?
    With this you'll be able to see reputation of users just with their badges (Answer Hero, Story Teller, Thought Leader etc) and their levels (Diamond, Gold, Topaz etc). Would you like that reputation system or this one with points showing with every name.? Please share your thoughts and views.
    Thank$

    Hi JP
    Thank you for being part of this discussion and sharing your views. As you can see there are users with different opinions and its good that we have multiple thoughts on it.
    When I post a question and get responses from users and if I like someone's response I always visit his profile and see his badges/level/points and area of expertise. It gives me an idea about his potential and increases my trust level. There are many users who sometimes give foolish suggestions without knowing anything. Some users respond just for the sake of points and they give irrelevant answers. If we see badges and points it gives us or at least me a trust level on poster. This is the reason that reputation system is mandatory for this type of forums.
    It doesn't mean newbies can't post good and valuable posts. There can be a newbie who has tons of knowledge and years of experience but he is new in SCN. Exceptions are always there but if we see as a whole you must be agreed that newbies post basic or sometimes irrelevant posts mostly.
    As you said points give us a barometer and sometimes this barometer can be misused specially when you are near to get some next level. You must have seen in car racings that driver boosts up speed to his maximum in last lap of race. When a user sees he needs just 300/400 points to reach next level (Topaz/Emerald) etc he can use tricks to get points. If we have only levels and badges and points are being calculating at background users will be contributing positively without curse of points.
    This is what I believe in.  
    Thank$

  • What is meant by opening stock balance?

    what is meant by opening stock balance and  how we load the opening stock balance .Actually i gone through the document in SDN.But i didn't understood properly.Can anybody explain in simple words.

    Hi Pardhu,
    In many cases your SAP R/3 system goes live earlier than your BW system.
    Say during go live in R/3 on 1st May 2009 - you had certain stock of product1 in inventory - say 100 PCS.
    You then sold 20PCS of product1 and brought 40PCS until today.
    So the stock of product1 in your inventory is 100 - 20 + 40 = 120.
    Now if your BW system was to Go Live tomorrow.
    You would have to let BW know what is your current stock level.
    From tomorrow then you can record only movements in BW.. ie you will send only data of sold and brought pcs of prodct1 from tomorrow.
    To inform BW about the current stock level you need the data source 2LIS_03_BX.
    To send the movements to BW you have the data source 2LIS_03_BF.
    2LIS_03_BX picks data from statistical table.
    For the statistical table to reflect the current stock of product one , you need to run MNCB ---> which precisely calculate the current stock level of product1 using the logic 100 - 20 + 40 ie stock till date and stores it in the statistical table.
    Then you load this data through 2LIS_03_BX to BW. Thus BW has the information of current stock.
    Then you load the movemens only through 2LIS_03_BF after setting up the delta.
    Markers can only be updaed when compression is done.
    You choose to update the marker based on certain conditions.
    BW uses markers to store the information of stock levels.
    It stores the stock as the marker value(reference value) +/- delta changes.
    When the cube is compressed you can update the marker. This will make the reference more current in time. Thus to calculate current stock you will have to take into account lesser deltas and a more current marker .. this improves performance...
    For further details on this :
    [How to handle inventory management scenarios|http://sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    Hope this helps,
    Best regards,
    Sunmit.

  • Field Only and Inversion

    Hello SDNers,
    I would like to ask you in the datasource there are 2 option si would liek to know when are they used.
    1) Inversion
    2) Field Only
    And Field only does this need to be checked when its custom enhancement t structure or can be checked for other reasons aswell.Please explain.
    Thanks.
    Krrish.

    Hi,
    usually inversion feature is useful for DS carrying customized Keyfigures which has -ve sign
    before loading to BW ,the value will be mulitplied by -1 and goes to BW
    check this SAP note:
    Inversion
    Reverse postings are possible for customer-defined key figures. For this reason, inversion is only possible for certain transaction data DataSources. These include DataSources that have a field that is indicated as an inversion field, for example, the field update mode in the DataSource 0FI_AP_3. If this field has a value, then the data records are interpreted as reverse records in BW.
    Set the Inversion indicator if you want to carry out a reverse posting for a customer-defined field (key figure). The value of the key figure is then transferred in inverted form (multiplied by –1) into BW.
    filed only..
    it is useful when you are enhancing the DS with the userdefined fields and has wriiten the code in CMOD
    Sap note:
    Field only known in exit
    You can enhance data by extending the extract structure for a DataSource using fields in append structures.
    The indicator Field only known in Exit is set for fields of an append structure. In other words, by default these fields are not passed onto the extractor from the field list and selection table.
    Deselect the indicator Field Only Known in Exit to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list as well as in the selection table.
    Cheers,
    Swapna.G

  • What is meant by nio?

    hi,
    Can any one explain what is meant by non-blocking io.
    and what for it is used.and what are the advantages of using if?
    Thanks in advance

    would you prefer to use io which hangs your program or one that doesn't?

  • What is meant by registering a Queue

    Hi all,
    What is meant by registering a queue and how exactly it is done?
    best regards,
    Kulwant

    Have a look at
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/59e837d3-0201-0010-c096-dc1869733413
    http://help.sap.com/saphelp_nw2004s/helpdata/en/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/04/827440c36ed562e10000000a155106/content.htm
    thanks,
    pooja
    Message was edited by:
            Pooja Pandey

  • Bypass selecting a user and going straight to log in screen.

    When i boot my computer up it comes to the Ctrl alt delete screen, like it is supposed to.  But when i press ctrl alt delete it brings me to a screen where i have to select a profile and the only profile available is "Other User".  I
    want to know how to bypass that screen and go to entering the username and password immediately after hitting ctrl alt delete.

    Hello tdl7,
    If my understanding is right, after pressing ctrl alt del, you want to enter the username and password instead of clicking Other User.
    Please take the following steps to fix this issue:
    1. Run regedit and go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    2. If you have a .DEFAULT key in the left pane as a subkey under the ProfileList key, then right click on .DEFAULT, and click on Delete.
    Note: please back up the registry before this change.
    For more information about how to back up and restore the registry in Windows, please take a look at the following KB.
    http://support2.microsoft.com/kb/322756/en-us
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • What is the link between 2lis_03_bf,2lis_03_bx and 2lis_03_uM

    HI,
    what is the link between 2lis_03_bf,2lis_03_bx and 2lis_03_uM.is these datasources to be loaded in the order.can anybody explain me

    Hi
    These three datasources are related to inventory. BF is for opening stock, BX is for material movements and UM is valuations. Before loading this data into BW you need to maintain some settings in R/3 side.
    According to  SAP NOTE:315880.T-code BF11.Activate the flag NDI will reflect in table  "TBE11" For the entry "NDI".
    2. set the application indicator 'BW' to active using Transaction 'BF11' . which will make tick mark(x) for the field AKTIV for the APPLK ='BW' in table TBE11.
    3. Activate the PROCESSKEY under "Maintain Industry Sector"
    4. Generated "STOCK INITIALIZATION" for 2LIS_03_BX.
    5. Filled setup tables for "INVENTORY CONTROLLING"
    6. Scheduled the InfoPackage for 2LIS_03_BX with update mode "GENERATE INITIAL STATUS.
    then load BF and UM
    There is a PDF available how to load inventory..just search for it in SDN.
    REgards
    Ram

  • My husband and I both have iPhones on the same account. When he did his update yesterday, he chose both his number and my number during set up. Now he is getting my messages, too. Can someone please help me fix this?

    My husband and I both have iPhones on the same account. When he did his update yesterday, he chose both his number and my number during set up. Now he is getting my messages, too. Can someone please help me fix this?

    What do you mean he chose his and your number during setup. Chose them for what? Is you number showing up in the Settings>Messages>"You can be reached by imessage at" section? If it is he needs to remove it.
    Cheers,
    GB

  • DB Adapters Update Only and Insert Only Options

    Hi,
    Need details about "Update Only" and "Insert Only' options in Oracle SOA Suite 11g DbAdapter.
    What is differece between normal insert / Update and Insert Only / Update Only Options.
    Thanks,
    Arun Jadhav

    Hi,
    Need details about "Update Only" and "Insert Only' options in Oracle SOA Suite 11g DbAdapter.
    What is differece between normal insert / Update and Insert Only / Update Only Options.
    Thanks,
    Arun Jadhav

Maybe you are looking for