What is most stable combination of OS 10.4 and FCP 6

I'm having dropped frame issues that I wasn't having before. I have changed no settings but did do a 'studio upgrade' using Software Update. Now I'm having the dropped frames.
Does anyone know what the most stable combination of versions of OS 10.4 and FCP 6 is?
my system: 17inch Macbook pro
2.4 GHz Intel Core 2 Duo
2 GB 667 MHz DDR2 SDRAM
Final Cut Studio 2
final cut 6.0.1

Unless you know of a specific issue, I'd suggest going to 10.4.10. It will have the latest patches, bug fixes, security updates, etc...
Problems that occur after updates tend to be problems that were already there.
hth
Jeff

Similar Messages

What the most stable quality 4gb (2x2gb) memory for the P6n SLi Platinum?

Hi,
I'm looking for the most stable and very good quality 4gb of ram for the P6N sli platinum MB - what make does everyone recommend for this board?
I note that Kingston value ram is mentioned on the Approved list but I wanted something faster than the valueram?
Does anyone have either G.Skill or super talent and if so how do they work? Any other makes that you can recommend?
I know that there have been issue swith 4gb of ram for Xp/Vista 32 bit systems but from what I am reading hopefully the next bios should resolve this ...?
Thanks as this is the only item that's holding up my build now !

I don´t know whats the most stable 4GB solution is, I only can tell you, that I use Micron/Crucial mamory for years and never had any problems.
Actually in my new P6N-SLI Platinum are working 4 1GB dimms of crucial value ram ddr2-667 without problems.
There is a new bois version 1.22 for the platinum which solved the 4GB problem of earlier bios versions.
That was a bios problem and not a problem of the ram.
Manufacturer as Gskill on their GBHZ6400 modules and OCZ on their 1066 SLI modules are using the same Micron chips called D9GMH which are on my values.
They have great potential above the rated 667 speed. Cause i´m coming from germany and at the moment the prices of memory here are very cheap, a lot of people are thinking about upgrading their memory.
All what I read about here in germany G.Skill, Mushkin(very expensive), OCZ, A-data, TeamGroup are the most reliable rams
when it comes to high speeds and low latency modules.
At least I recommend the Crucial Ballistix ddr800 if you are not able to handle special settings in the motherboard bios.
And of course there are coming 2GB modules from most of the manufacturers, so you only need 2 modules for 4GB.
It´s your choice...
greetings from germany
gonzos-revenge

Whats the most stable version?

What is the most stable version of iTunes for just playing music? I don't need anything else, bells or whistles. Always getting the beachball of death with 7.6 and I'm fed up.
thanks in advance

FWIW, I have 7.6.1 running on over 40 systems, most of which are G5s and one of which is my personal system at home and gets extensive use of iTunes, and have had no problems at all. So any problems you might be experiencing with iTunes 7.6 are not endemic to all installations of iTunes on G5s. Perhaps you have some third-party codec, add-on or plugin that might be affecting stability?

WHAT IS MOST STABLE VERSION OF SNOW LEOPARD

I've just completed a clean install of OS X 10.6.3. My usual methods are to use Software Update to get the latest version of Snow Leopard and I had been using 10.6.7. However lately I have had to do the clean install partly because somewhere along the line I downloaded a Java Update that the permissions would never clear up in Disk Utility. This, I believe, along with a botched setup of Parallels v4.0, my business iMac machine was becoming quite unstable and slow. Note: some of my favored applications are pre 2005 versions running under Rosetta.

However lately I have had to do the clean install partly because somewhere along the line I downloaded a Java Update that the permissions would never clear up in Disk Utility.
We all get those. They are not errors, consequently they will never be "repaired." It just means Apple hasn't updated the Permissions database.
The question should not be which version is the most stable, rather, which version is compatible with third party apps you must have and don't want to lose. As OS updates progress, PPC apps, especially, running under Rosetta, may lose some of their functionality. Updating is important in order to get the latest security patches. So, it's a possible tradeoff.
Here are my Java Permissions that won't be repaired. I think I made this screenshot for 10.6.4 or 5 and many more have been added since.

What are most commonly used BADIs for Opportunities and BPs?

Dear all,
What are mostly used BADI's for Oppotunity Management and Business Partner Maintenance, and what is the use of those BADIs.
what is the use of BAPI's in CRM, suggest me BAPI names and their usage
Your suggestions will be highly appreciated
Best wishes
Raghu ram

Hi Hari,
the variable which has to be created depends on the business requirement and differs based on the report requirement.
for more informatrion on variables you can refer to following docs,
characteristics variables
http://help.sap.com/erp2005_ehp_02/helpdata/en/5c/8db08a555411d189660000e829fbbd/frameset.htm
text variables
http://help.sap.com/erp2005_ehp_02/helpdata/en/5c/8db0a4555411d189660000e829fbbd/frameset.htm
formula variables
http://help.sap.com/erp2005_ehp_02/helpdata/en/5c/8db0b1555411d189660000e829fbbd/frameset.htm
http://help.sap.com/erp2005_ehp_02/helpdata/en/5c/8db0a4555411d189660000e829fbbd/frameset.htm
:->
NM

Is there something very wrong with Lion and Fcp x or what?

I have just spent a very frustrating two weeks editing a one hour fifteen minute project on FCP X with Lion as the operating system. Every edit session has been plagued with crashes. My mac is a 21.2 inch, with an I7 processor and 12gig of ram which I bought the middle of this year. I had set my computer up with two partitions, one with Lion and the other with Snow leopard. This morning, in an effort to improve the terrible instability of FCP X under Lion I decided to try it under Snow Leopard......What an unbelievable difference.....I've been editing for the last three hours now throwing all kinds of clips and effects and so forth at the timeline and have not experienced one crash. What is going on here? How can Lion and FCP X be so incompatible?

dpcam1 wrote:
I have just spent a very frustrating two weeks editing a one hour fifteen minute project on FCP X with Lion as the operating system.
You don't mention whether this one hour and fifteen minutes long project consisted of just one FCP X project when you experienced problems with FCP X and Lion?
You also don't mention how long the project was that you edited successfully with Snow Leopard. If, as I suspect, this was a very short 'test' project, that would make sense. FCP X does not cope well with long projects.
I use Lion exclusively but I keep my projects to a maximum of 30 minutes (preferably no more than 20 mins). If the total programme is longer, I make create several FCP X projects - each being a 'chapter' of the main programme. When finished, I make compound clips of all the 'chapters' then I paste them into a new (full length) project.
I'm not pretending FCP X is perfect, but for me at least, it's very workable as long as you understand it's weaknesses. I have 16 GB RAM and since I upgraded from the 8 GB I had previously, it's made a huge difference.
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Other ways to improve performance:
Create optimised media.
Hide Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power.
Create folders in the Project library and put any projects you are not working on currently, in there. (Twirl it closed to hide them).
Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
Andy

What's the most stable browser for flash?

I play flash games and run several accounts at a time. I use Chrome at the moment, but have issues with it crashing 2+ times per day. What's the most stable browser platform for flash at the moment?
I have the latest updates and upgrades & a 15" MBP that should have plenty of power.

Firefox or Safari, in my opinion. I prefer Firefox, use Safari occasionally, and just have never given Chrome a real chance. I don't like the 'built in' Flash and PDF technology in Chrome.
Give Firefox a try - lots of support for it.
Clinton

What is the best and most stable firmware for wrt1900ac?

I recently got the wrt1900ac and I wabt to update the firmware. What is the best and most stable firmware for wrt1900ac?

The most current version is pretty stable aside the Network Map App which is known to cause a router reboot. Linksys is aware of this and is working on fixing it. Just don't use this app.
Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
To safely update FW, I recommend doing the following:
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
My current WiFi settings that are working well are Mixed Mode on both radios, Mixed Channel width on both radios, WPA2 only. Manual channel 11 on 2.4Ghz and 149 on 5Ghz. However those channels for your use will depend on whos near by your surroundings found in the InSSIDer app and you'll need to adjust accordingly to channels that are not being used which are preferred 1, 6 and 11 or (13 for out side of the north america region) on 2.4Ghz. WPS, Media Filter and IPv6 disabled. USB Drive Share, WMM and Media Prioritization enabled. LinksysSmartWiFi is enabled along with mobile access app on Iphone 4S works.

What version of Leopard with what version of Logic is MOST STABLE??

A very simple question really. What version of Leopard, as of now, is the most stable and glitch-free with which version of Logic?? 10.5.1 vs. 10.5.2 vs. L7.2.3 vs. L8.??
Thanks,
Jeremy
<edited by host - see [Terms of Use section 2.6.3|http://discussions.apple.com/help.jspa#terms]>

Leopard 10.5.2 had introduced many problems, I'd say 10.5.1 is therefor the stable (or safer) one.
As for Logic, I think LP8 as a universal app is more at home with Intel Macs, but otherwise it's not that simple and you can read plenty opinions on this board on both sides.
I'd still go with LP8, people go back to L7 as last resort when something is not running well.

Most stable version of E-Business Suite R12

Dear all,
can anyone tell me which is the most stable version of R12?
Currently i am installing R12.1.1 for product purpose.
Do you suggest that I should upgrade to R12.1.3 for production environment?
thanks & warm regards,
YC

hi Srini, Hussein,
i have run patch 9239089 successfully. then i downloaded all 6 files for patch 9239090. i unzip all into the "9239090" directory.
i run . APPSUAT_erp.env
then i run $AD_TOP/bin/admsi.pl -patch_top=/R12stage/patch/9239090" - appspass=pass
i got this error:
invalid patch_top or this patch may not be applicable for running admsi.pl. i already unzip all files into that directory. I search for many hours but still no clue on what's went wrong.
your help is greatly appreciated. i open the admsilog and it displays same msg.
YC :(

Most Stable Version of OAS

What is the most stable version of Oracle Application Server? Our app is a PL/SQL based app with most of the work done on the database side. We use HTTP and OEM.
Also, what database version (Standard and Enterprise) would be recommended for this version?
Thanks,
Steve

I am not impressed with Reports 9.0.2. It seems to
crash a lot. Reports 6i are very stable but
desupported January 2005. Reports 9.0.4 is pretty
stable. A lot of bux fixes are in 9.0.4 that are not
yet in 9.0.2.x.
Go with 9.0.4 with Reports.Many thanks you for your fast answer. But I have to say that Reports 6i wasn't stable in our environment (perhaps one crash every second day).
Forms are just stable. I haven't had any problems
with Forms in any version except when trying to run
version 6i through a CGI. Running it as a servlet
makes a world of difference.We made the same experience with Forms :-)

Which is the last most stable version of Firefox for non-dual-core CPUs? Thanks.

I run a Dell Pentium 4. I found newer versions of Firefox to be deadly slow and extremely unreliable. I find 3.0.19 to be the last most stable version for non-dual core processors. Absolutely no problems. And no endless remoting. However, there is no further safety support for this version. Thus...
Which is the last most stable version of Firefox for older non-dual-core CPUs?
Many thanks.

Thanks but this isn't what I need. I need a URL that directly downloads with wget so I can automate it. This takes you to a page that contains links. I'd have to scrape the page to find the one I want, and while that isn't impossible it is a huge over-complication for something that should really be pretty simple.

Most stable version of OS 10.4.X - which X?

Hi,
just finally upgraded our G4 to Tiger last night. Right now its at 10.4.
What's the most stable .X version to go to? I see mention of lots of other problems. Is 10.4.7 fairly stable, or is 10.4.9?
thank you,
'mark

Unless you know of a specific issue, I'd suggest going to 10.4.10. It will have the latest patches, bug fixes, security updates, etc...
Problems that occur after updates tend to be problems that were already there.
hth
Jeff

Most stable patch level ?

What is the difference b/n the version SAP 2005 B SP:00 and SAP 2005B SP:01 ?
What is the latest patch level available?
What is the bug free and most stable patch level?

Hi,
there are no stable patch level and bug free.
if it is available, Customer won't pay the maintenance fee per year and SAP R&D team will be fired:)
The patch level is a part of SAP B1 enhancement.
Browse this website to know the latest PL :
https://websmp204.sap-ag.de/~sapidb/011000358700007392752004E
and related notes that explained what problem resolved in the PL.
Rgds,

HT1222 which version of ios is the most stable for the 3GS

There are serveral ios to update...
Can you tell me which of the version is most stable for the 3GS
Thanks & Regards

The only signed firmware available for your phone is iOS 5.1.1. If you update or restore, that's what will be installed on your phone. You can't pick & chose. If you don't want iOS 5.1.1, don't update. If you're already running iOS 5.1.1, it is what it is.

What is most stable combination of OS 10.4 and FCP 6

Similar Messages

Maybe you are looking for