What is my IMAP server name so I can reload my Kindle e-mail
I am re-adding my e-mail account to my Kindle. It's asking for the IMAP server name. Where so I find this?
Who is your email provider? Your email provider names their server. Best ask them.
If you have Thunderbird running on another device, go to Tools-Account Settings-Outgoing Server (SMTP) and see what is there.
Similar Messages
-
IMAP server appears to be temporarily out of service = No Mail?
This may be the wrong forum for this, I know. However, the .mac forum is the "land of the misfit repair requests" as far as Apple is concerned. Perhaps posting this here will get some attention.
This issue does not impact all .mac mail accounts but if it impacts yours, you already know its not working.
Can someone in Cupertino take a look?
ThanksFirst check to see if your mailbox is online. If it is try synchronizing it.
cornelius -
I'd been using the program on the same computer for years. I've tried just about everything now, backing up my email boxes to my desktop and deleting them, creating a new account and deleting the old one. I've checked the behaviors. I've dumped tons of old emails. Help. There is one other thing that was happening in the months before that I didn't realize. As my computer downloaded the incoming files, they were not being erased from the server. I don't know why. I hadn't changed any settings. The Rep from my server company insisted it was that I'd maxed out the program or something was corrupt and recreating the account would help. It didn't. When I'd done everything else and backed up everything, I also tried deleting the Cache in the Finder. No difference. Help.
How much mail are we talking about here? Roughly how many messages, and roughly how many gigabytes of mail?
Who is the mail provider? Is this a local provider on a local network, or one of the "free" providers, or something from your ISP?
Do you have free disk space on your OS X system here, or is it possible that your disk is getting full?
As for the usual diagnostics for problems with Mail.app, launch Mail.app and select the Connection Doctor from the Window menu, let it run, select More Details, and re-run the tests. Expunge any personally-identifying information and post the results here, if they don't make the trigger clear.
You can also try a mailbox repair pass; there's a Rebuild option in the Mail.app menus.
If the downloads are failing, then the usual trigger is the IMAP or POP password setup; there are two entirely seperate connections and two separate credentials and such; the send path (SMTP) and the receive (IMAP or POP) path. Usual triggers for problems are changes to the mail servers involved, or the mail ports, or the credentials needed; I've seen vendors change each of those, and forget to mention it to their users.
That OS X version is extremely old. (I don't have anything nearly that old to check the details fo the setup of that version; 10.6.8 is the oldest OS X version I have handy.) -
What is the incoming and outgoing mail server names?
I'm trying to set up outlook express, and I need the outgoing
and incoming server names. I can't figure out how to find these.Contact your email service provider for that information. It's not a Firefox support issue.
-
How to find out SSRS report server name
I'm trying to follow the steps for using SSRS web services (http://ssrstutorials.blogspot.com/2012/10/lesson-12-using-ssrs-web-services.html).
In Step 3:
Click advanced--> add web reference -- url - http://localhost/reportserver/reportservice2005.asmx
(replace localhost with your report server name).
How do I know what's my report server name?
Thanks,Hi sherri71,
Sorry for that mark an incorrect reply as an answer.
The reply suggested by Akbar is about Instance Name, not report server name. Based on my further research, I find that the Reporting Services server name is the computer name which install
the report server. So we can try to click Start button, right-clicking Computer, and then clicking Properties. Under Computer name, domain, and workgroup settings, you can find your computer name.
If there are any other questions, please feel free to ask.
Thanks,
Katherine xiong
Katherine Xiong
TechNet Community Support -
How Can i specify multiple server names in rwservlet.properties file?
How Can i specify multiple server names in rwservlet.properties file without clustering?
I am using oracle 10g Application server. we have 3 servers Repsvr1, RepSvr2 and RepSvr3. Now i need to configure rwservlet.properties file to point to these servers based on any running report. i got 3 keymap files with reports info.
Sample entry in the key map file is:
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
rwservlet.properties file letting me to enter only one servername. Even though i merged all 3 keymap files into 1, still i have the server name issue. If i leave the server to the default name still i am getting the below error.
REP-51002: Bind to Reports Server Repsvr1 failed. However, i know the default rep_<servername> would be used incase we dont have SERVER=<value> parameter in the rwservlet.properties file.
If i specify the servername in the rwservlet.properties file then only Repsvr1 reports are working fine and other 2 server reports are giving the same error like
REP-51002: Bind to Reports Server <<Server Name>> failed.
how can i configure the info which will work all 3 reports. 2 Port servers are invoking using oracle forms and report server is invoking using ASP pages.
If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error, whenever i am trying to integrate all 3 to workable i am getting binding error. if i exclude the server from rwservlet.properties still i am getting the same error.My RELOAD_KEYMAP setting is YES only.As i said If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error.
keymap file entries
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
If i use http://server.domain:port/reports/rwservlet? cmdkey = key1 should bring the report from Repsvr1 and http://server.domain:port/reports/rwservlet? cmdkey = key2 should bring the report from Repsvr2, but i am getting an error from Repsvr2 saying that REP-51002: Bind to Reports Server repsvr2 failed.
Only Servername Repsvr1 is in rwservlet.properties file. Now what is the best option to by pass the server from rwservlet.properties file and should be from keymap file. if i comment server name in rwservlet.properties file still i am getting REP-51002: Bind to Reports Server <<Server Name>> failed error for both keys. -
Server name (ORACLE_SID) for Oracle8 Personal Edtion
I have installed Oracle8 Personal Edtion on Window 98. How do I found out what is the oracle server name (ORACLE_SID as we say on unix). I want to connect to the database from a Visual Basic program.
Hi
Look into registry
HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/...
Guillaume -
TS4002 I cannot edit my incoming mail server name under iCloud
This morning my iCloud email stopped working. When I open the Mail preferences panel and look at the iCloud account, the Incoming Mail Server is listed as "mail.example.com" and is greyed out. I cannot edit this entry to the proper iCloud server name. I can edit my user name and password, but when I try to save changes it tells me that I cannot leave the Incoming Mail Server name blank. Which wouldn't be a problem if I could, you know, change it.
This just started this morning. I noticed that Mail was asking me for passwords that have been in my Keychain for ages, and I had to manually enter them all to get to my email.
My account is working on my iOS devices.
TomLooked around on other threads on Apple Support and found a solution that worked for me.
- Delete your iCloud account in Mail Preferences, Account tab.
- Click "+" to add an account
- Fill in your iCloud name-address-password, then hold Option key down, then click 'Continue'. Holding Option down takes you to a screen you normally don't see!
- Change the incoming Mail Server from 'mail.me.com' to 'imap.mail.me.com'
- Proceed creating your account.
Try! -
Mail stopped picking up new mail from IMAP server [MDaemon]
I've been using Mail to pick up my mail from a number of different mail accounts (MobileMe, Gmail and work mail). Everything has worked fine until a couple of weeks ago when mail stopped picking up new mail from my work mail account.
I have tried deleting the mail account and setting it up again - all that did was to lose the cached mail on my machine, although it picked up the folders from the imap server and it's looking in the folders for mail [I can see that from the Activity Window]. It also seems not to delete everything as, when I went to set it up again, the email address field was already defaulted to the one for the account I had previously deleted.
I then tried creating a new user on my laptop and setting up the work mail account under this user. It worked perfectly - it went off and got all of the mail from the server (OK by me) and started picking up the mail OK.
So I'm guessing that if I can really delete the mail fully from my main user, I could reintroduce it and all would be well. However, I've scanned the whole disk for my email address and deleted (after backing up) all files I found with the address in. Again, it still seemed to know about the account I removed.
Anyone any ideas?Troubleshooting Apple Mail
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages -
Hi All,
I have the below script which gives me the Exchange database names with the number of mailboxex in it.
(get-mailboxdatabase) | foreach-object {write-host $_.name (get-mailbox -database $_.name).count}
What i want is i also need the Server name and the DAG name (If possible) in this script so i get the output in the below format
What i get is:
Database name | No of mailboxes in the DB
XXXXX 250
What i want is:
Server name | Database name | No of mailboxes in the DB | DAG name (If possible)
XXXXXX XXXXXXX 250
DAG01
Can any one help me in making this script plz.
Gautam.75801Hi Peter,
Script works well and Good. But i cannot export the same in a CSV File. I used the below commands. But the output csv file is empty. I can just view the data in the monitor in the powershell window.
Any idea how can i export this in CSV ?
(get-mailboxdatabase) | foreach-object {write-host $_.Server, $_.name (get-mailbox -resultsize
unlimited -database $_.name).count, $_.masterserveroravailabilitygroup} | Export-csv -Path C:\Rpt.csv
And
(get-mailboxdatabase) | foreach-object {write-host $_.Server, $_.name (get-mailbox -resultsize
unlimited -database $_.name).count, $_.masterserveroravailabilitygroup} >C:\Rpt.csv
Gautam.75801 -
Since I updated my iPhone 4S to iOS 8.1.2 last night, I can no longer connect to my imaps server. Other clients can connect to the server. Rebooting the device is no help. Before the update (i.e. 8.1.1), it was working fine. Is this a known issue?
No, it is not a known issue. It is a known non-issue. Try resetting your IMAP login ID and password. Both the incoming and outgoing. If that fails delete the account reboot the phone, and add it back.
-
I forgot my WebDAV server name? How can I find it?
Why not check the help for Dropbox?
https://www.dropbox.com/help/62
I suggest you search Google for "dropbox webdav" for options. -
I can't find my 'incoming mail server' menu/buttons on my iTouch 4g
I mean from Home > Settings > iCloud > Account > Advanced Mail I can see where my Outgoing Mail Server is but I can't find my incoming mail server. My Mail does not work (it can only send emails, and cannot receive emails) and I think it's because I don't have an incoming mail server menu/button(s)?
No. That is not the reason. I do not have any information/button for an incoming server and it works fine.I would delete the account on the iPod and then recreate it.
-
I keep getting a message "The MobileMe IMAP server ... rejected the password for ...." I can use that password when I go to iCloud (and to this discussion), but my e-mails won't download to my computer. What's the mix-up?
If the setting is greyed out perhaps you have restrictions enabled that would prevent someone from changing accounts. Settings>General>Restrictions>Allow Changes>Accounts.
-
So I have set up a localhost area in my Mac. I have the new server.app and I am running yosemite 10.10.2 .
I have a program running in my local server enviroment that wants to FTP to my mac .
It asks for the server , name, password, port and path. what are they?
I am pretty certain that the Serveris "localhost",
Name is my macs name (like my-mac-min)
password is "my login password"
and they suggest port 21.
But what is the file path, lets just say my site is set up http://localhost/siteftp and is actually at my Users/Sites/siteftp folder.
Why cant this program connect to the mac.
Is it because they are both operating in the same localhost enviroment,
could it be my folder permissions are not correct on siteftp folder?
Help please !I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on.
Maybe you are looking for
-
MY iPhone 4 was run over at work by a forklift the screen was badly cracked but other than that worked fine for 6 days. Then it got really hot while charging and shut down and will not power back up. I have photos on this phone that we're not backed
-
Asset Transfer Related Question
We are uploading some assets from a SAP system to another under a new company code. The old company will sell the assets off to new company for cash payment at the Net Book Value so the assets in the new company will be uploaded as new assets. Can an
-
Project X - Turning a Pismo into an iMac
Hi everyone, Some of you may remember that last year I bought a Pismo with a smashed screen, specifically for the 500MHz processor, RAM and HDD. Well, now I've decided what to do with it - I'm going to make the machine into the world's first TFT iMac
-
Appearance and Geometry behavior on CloneTree
Hi guys.. I have a difficulty in understanding how Appearance and Geometry behave on CloneTree. I hope somebody here can help me. I have a BranchGroup BG with a total 4 Shape3D's contained in it. When I created those Shape3Ds, I've made sure that the
-
Formatting error when displaying OSS note w/PDF
While searching & displaying OSS notes, I click the PDF button to print or download the note. I then get a message "An error occurred when formatting the SAP note.". Has anyone seen this and have suggestions for correcting it? My colleague is able