What is my @me password...i thought it was my apple id password...but thats not working

Please help...

Do just that.  Connect it to iTunes.  It may be necessary to place the iPod in recovery mode first.  See this article for instructions on connecting your iPod to iTunes in recovery mode.  There you can restore it to factory settings.
http://support.apple.com/kb/ht1808
B-rock

Similar Messages

  • W700 - Thought it was a "Type II" slot but its not ??!!

    Tried to slide in my Type II CardBus compatible Firewire 800 card from my old laptop into the slot under the left palm rest. It only fits in half way.. what type of slot is this??
    Thanks!

    It's the faster ExpressCard slot (http://en.wikipedia.org/wiki/Express_card).

  • I was using my apple tv remote but its not working. I tried everything selected different input unplugging the apple tv but still no signal. I can't update bec its blank what am i going to do Please help just purchased this item maybe 3-4 mos ago

    Can someone please help me Apple tv is not working.  There is no signal, i trIed pressing the left and right button and used different hdmi input unplugged the device still not working.  I just purchased it maybe 3-4 months ago

    You might want to try asking in the correct forum. This forum is for iPhones being used in an enterprise environment.

  • I forget my password to my ipod and i have try to rerstart it but its not working what should i do?

    i forget my password to my ipod and i have try to restart it but its not working. i have done i could think of please help!!

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
      4. What to Do If You've Forgotten Your iPhone's Passcode
      5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the
              Back Up option. If you have just backed up the device, it is not necessary
              to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • HT5654 Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Hello, Jdragone. 
    Thanks for the question.  Start with completely uninstalling iTunes and all of it's components in the order specified in the article below.  Once this is done, download and install iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H.

  • Ive tried to reset my iclouds password but its not working

    i need to activate iphone 4s, ive tried on my laptop to re-set it but its not working, ive been trying for the pass 3hours?
    i just want to use my phone again?
    i cant remember setting a password?
    I aslo cant remember if i created two different passwords for iclouds and appleID.
    NEED HELP?

    Contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • Hello i forgot my i cloud password..anyone can help me to find my password.i already make a new apple id..but my icloud use another account..so how to reset my iCloud account plz hel me

    hello i forgot my i cloud password..anyone can help me to find my password.i already make a new apple id..but my icloud use another account..so how to reset my iCloud account plz hel me

    Making a new Apple ID is not a good idea, since you have to reset the password for that Apple ID anyway. All of your purchases are tied to the Apple ID that the iCloud account was created under. So, you have to retrieve the password for that Apple ID in order to sign into iCloud anyway.
    Go to Manage your Apple ID, and click on the Reset Password option (Apple - My Apple ID). Sign on with the Apple ID that the iCloud account was created under, and answer the security questions. If you do not remember the answers to the Security Questions, contact Apple Support to have them reset:
    ACCOUNT SECURITY CONTACT NUMBERS
    Cheers,
    GB

  • We have a 10 person office - all either use Acrobat XI or Reader XI.  One person is on Windows 7.  The rest are on Windows 8 (not 8.1).  I say this because I thought it was a Windows 8 issue, but having the same problems on the Windows 7 machine. We are a

    We have a 10 person office - all either use Acrobat XI or Reader XI.  One person is on Windows 7.  The rest are on Windows 8 (not 8.1).  I say this because I thought it was a Windows 8 issue, but having the same problems on the Windows 7 machine. We are all having problems opening pdf's sent to us from other firms. This has increased in frequency over the past two months. We've checked with the various firms, and their other clients are not having problems. Some pdfs open but with a lot of missing content and strange formatting, others won't open at all.  There are different error messaged depending upon the doc.  Some are regarding the fonts, for example "can't extract the embedded font...."  Others are "insufficient data" errors.  There are more, but for purposes of keeping this short, I won't include them.  Another unrelated issue is that we are having trouble printing excel files to pdf.  The files end up with bad formatting.  I've worked with adobe "chat" support, our IT consultants with no resolution.  I also haven't found any similar "known issue" online  Would very much appreciate any assistance.  Thank you

    The font embedding can be a problem if not done and you are trying to view the PDF and do not have the font on your machine. Acrobat will often try to find a replacement, but it is not always a good choice. Sometimes the "Use Local Fonts" button can be changed in state to resolve some of the viewing issues.
    If you are trying to copy or export info, then it is important that you have the fonts on your system. Otherwise, the message you are getting about embedded fonts would not be showing up.
    As for Excel formatting, be sure that the Adobe PDF printer is selected in the printer screen before you look for the paging and formatting of the file. In most OFFICE programs, if you change the printer the application will reflow the document to best match the printer (called "using printer metrics"). So check before you create the PDF that the layout is correct.

  • Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

    Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • HT4623 iOS 6.1 no longer available because you are no longer connected to the internet- this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.

    this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
    is there any other method to download ios 6.1.2.
    my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
    kindly help.
    thanks

    well in thatcase, i need another help .
    thanks for your instant reply.
    i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
    because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

  • I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you.  But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • I cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please

    i cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please..
    i updated my ipad in ios 6

    Turn off VoiceOver
    1. Press the Home button
    2. Tap Settings.
    3. Then double-tap Settings.
    4. Tap General.
    5. Then double-tap General.
    6. Use three fingers on the screen to scroll to Accessibility
    7. Tap Accessibility.
    8. Then double-tap Accessibility
    9. Tap VoiceOver
    10. Then double-tap VoiceOver.
    11. Tap "On" next to VoiceOver
    12. Then double-tap "On" to turn it off.

  • My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?

    My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?

    How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.

  • HT4972 I am using iphone 3g and it is having currently IOS 4.1 version,till what IOS version can i upgrade ? please help me many of my apps are not working esp whatsapp.

    am using iphone 3g and it is having currently IOS 4.1 version,till what IOS version can i upgrade ? please help me many of my apps are not working esp whatsapp.

    iOS 4.2.1 is the latest version of iOS for the 3G.
    Facebook and Whatsapp both require 4.3 or higher.
    If you want to use those apps, either use the old version that should be in your iTunes library or upgrade the hardware to a 3GS or newer device.

  • My vreative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i  do?

    my creative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i  do?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

Maybe you are looking for

  • If I download the new dreamweaver will I loose all my "sites"??

    if I download the new dreamweaver will I loose all my "sites"??

  • IOS Timer Problem - Best practice?

    Hey there, I'm using a global "idle timer" and for some reason, after the app is started the first time the timer event is launched it will launch dozens of times. After 1..2 regular events all becomes normal. Any idea or tips? Using AIR SDK 2.7 Best

  • Server and Presentation Variables and Displaying in Dashboard Report

    Hello I am running into dead ends trying to get what seems a simple request implemented. The user would like to be prompted for a Date range and have the dates they select displayed in the Title of the report, they also would like the default data se

  • Volume control slider position not saved at exit

    Just upgraded to 6.0.2.23 and when I started it for the first time, I noticed that the volume slider was pegged at max. Thought nothing of it and turned it down. The next day, when I started iTunes, I noticed that it was pegged again. It appears to m

  • Interoperability Notes for Patchset

    Hi Reading note for Patch 4547809, preparing for the patch set that will update our 9.2.0.5 to 9.2.0.8, it explains: If you are an Oracle E-Business Suite customer and you want to upgrade your Oracle E-Business Suite release 11i database server to th