What is "na" means in "stack" column for Precise CPU Usage?

I'm trying to analyze CPU usage of third party process. I zoomed in on 3 sec of process eating 25% of CPU and it's a single thread 4184 doing it. When I add "stack" column after Thread Column, it shows that processing split is between [Root] and
n/a
What n/a means? Stack column is empty for it.

n/a in this context (and in most others realistically) would mean "Not Applicable".

Similar Messages

  • What is the meaning of this column in the pricing  procedure?

    Dear Gurus,
    What is the meaning of this column in the pricing procedure?
    thanks..

    subtotal field : Subtotal field is used to pass the value to some other field in PO .
    for ex: using value 9 you pass the value to field komp-brtwr. so that this can be used in  any other routine in the pricing procedure.
    requirement field: if there is a scenario that condition type should come in pricing on some condition like vendor country is india. in that case use create the requirment and attached this requirement.in this requirment you put logic and set the sy-subrc value 4 or 0.

  • Querying application for high cpu usage

    Hi , I need to run / create a report that could query a application that using alot of cpu resources, but the thing is that it would need to check every service or task that is run by the application?
    Thanks

    Hi,
    As we can see, the lsit of application in the task manager sorted by CPU usage always change. And with SCOM, we can only get out performance report for monitored objects, but cannot get the application name which eat most CPU.
    It is suggested to create performance monitor to set alert when avaliable CPU is below a value, so that we can check the task manager on the agent monitored which cost most CPU.
    Regards,
    Yan Li 
    Regards, Yan Li

  • What does it mean 10 Gb limit for windows MS SQL server R2 Express

    I  have a question:
    I have just read about the other topic reguarding the 10Gb limit of MS SQL Express.
    If I need to manage 1 TB of data Can I use MS SQL Express?
    How much data Can I save on my HDD? Is it just 10 Gb? 
    is it 10 Gb the max address of data that the database can manage?
    Thanks!

    QUOTE from article: "
    Keep large BLOBs out of your database
    It seems tempting to store large binary objects inside your database. The advantage is that you keep all data together, but at the expense of database size (which is precious in Express). It’s often a better idea to store large BLOBs outside the primary
    database using
    FILESTREAMs.
    Another option is to store the files on disk and only keep the filename in the database. This requires additional handling in the business logic, because you need to delete the files on disk, when the associated record in the database is removed. You
    also need to change the logic to obtain the actual files. This might be an advantage, because files have much better support in C# then database BLOBs. It’s quite easy to return a stream to file, but streaming from a database BLOB is much harder.
    If you do want to keep your BLOBs in the database, then consider to use a separate database for your BLOBs. It’s fine to keep this database in the same engine, if you don’t expect to use the BLOBs a lot."
    LINK:
    http://blog.ramondeklein.nl/index.php/2014/01/27/sql-express-10gb-limit/
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Database Design
    New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

  • What do colors mean for object type in Business Object Repository browser?

    Hi,
    I am a new guy in SAP. I have a question. The object typies in BOR browser, there are kinds of colors, blue, light blue, pink, red,.. And also, for some object type, there is check mark beside them. What do these mean?
    Thank you for your help.

    Hi,
    The following information will be helpful for you.
    [Business Object Repository |help.sap.com/saphelp_40b/helpdata/en/7e/5e128f4a1611d1894c0000e829fbbd/content.htm]
    [Repository Browser |help.sap.com/saphelp_nw70/helpdata/en/60/d6ba75ceda11d1953a0000e82de14a/content.htm]
    [Business Object Repository|http://help.sap.com/saphelp_nw04/helpdata/en/c5/e4ac87453d11d189430000e829fbbd/frameset.htm]
    Assign Points if helpful.
    Thanks and Regards,
    Naveen Dasari.

  • WS Adapter(PI 7.1) vs SOAManager? PI 7.4 Single Stack capabilities for WS-RM

    Hi Experts,
    The dual-stack SAP PI came with WS Adapter had the Direct communication capabilities between 2 ERP systems skipping IE, which made the communication fast and also gave the additional monitoring capabilities of PI to the communication.
    With SAP PI 7.4, we do not have WS Adapter. Is this a set back? or Was it unnecessary looking at the existence of SOAManager configuraitons?
    Can anyone some points on WS Adapter vs SOAMANAGER for WS-RM configurations/direct communication between 2 ERP systems?
    Thanks and Regards,
    Vikas Kumar Singh

    (a) I am under the impression that WS -RM adapter used for Web services cannot be used in asynchronous scenarios. Am I correct?
    Actually WS adapter only supports Asynchronous communication (EO/ EOIO)
    (b) If WS-RM Adapter can be used for asynchronous scenarios, how do we do it?
    The corresponding Service Interface (in your case sender) should be having mode as Asynchronous
    (c) Since I assume that WSRM Adapter cannot be used for asynchronous scenarios, if I use the scenario WSRM - IDOC
    (asynchronous) adapter, then I have to use BPM (Sync-Async communication). Am I correct to believe that WSRM -IDOC
    integration is not possible without BPM?
    (d) In case WSRM-IDOC integration is ONLY possible with BPM, is WS-RM --- ABAP Proxy better than WS-RM -- IDOC integration?
    NA
    Update:
    To confirm what I said refer the QoS column for WS adapter in the table over here:
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/0d/5ab43b274a960de10000000a114084/content.htm
    Regards,
    Abhishek.
    Edited by: abhishek salvi on Sep 24, 2009 8:27 PM

  • I have downloaded a movie to rent from iTunes but it is giving me an error message 5103. What does this mean?

    I have downloaded a movie to rent from iTunes but it is giving me an error message 5103. What does this mean?

    The fix for this is supposed to be resetting the system clock to automatic time, but this, as we've seen, more often than not fails to work. After a bit of an email exchange between Apple support and myself I discovered the true fix for this issue, or at least, the one that they said to use and that worked for me.
    After resetting your clock go to the folder /Users/Shared in Finder and delete the folder "SC Info". This is a hidden folder, so the way you will need to get it to appear is to use the go to folder command (Shift + Command + G) and type in /Users/Shared/SC Info and hit enter. Change to the column view and you'll be able to see the folder there. Move it to the trash and it will go away, and take your problems with it. Restart the computer for the deletion to take effect and then reauthorize your itunes. Should play your rentals after that.
    Props to Zarchanalin for the answer!

  • Maximum Number Of Columns For A OBIEE Pivot Table?

    Hi All ,
    What is the Maximum Number of Columns for a OBIEE Pivot Table? Also what is default size of columns set for Pivot view in OBIEE 11g?
    Thanks In Advance.
    Qujes

    Hi,
    You can increase the maximum columns in a view by add some tags to instanceconfig.xml file.
    check this...http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
    Regards,
    Srikanth
    Edited by: Srikanth Mandadi on Oct 15, 2010 10:04 AM

  • Disk Utility - Permissions repair - Warnings: What do they mean?

    What does this mean?
    Repairing permissions for “Macintosh HD”
    Warning: SUID file "Applications/Utilities/Keychain Access.app/Contents/Resources/kcproxy" has been modified and will not be repaired.
    Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
    Warning: SUID file "usr/libexec/security_authtrampoline" has been modified and will not be repaired.
    Permissions repair complete

    eespaillat wrote:
    Should I worry?
    nope. as Pondidni said: the important thing is +permissions repair complete+.
    as long as you see that, you're in the green.
    JGG

  • Stacked columns in iPad app

    Experts,
    Has anyone managed to create stacked columns for the iPad app?
    Whenever I create a standard stacked column chart in WebI and publish it to the iPad app, it shows a standard column chart with the dimensions next to each other instead of stacked.
    The same issue occurs when I try to create a line chart with several lines. The iPad app shows me one line in that case with the dimensions all next to each other.
    Expected: line for each state showing the sales over several years.
    Result: one line, showing Colorado 2004, California 2004, Florida 2004, Colorado 2005, California 2005 etc.....
    Thanks in advance.

    Hi,
    Yes I have updated the iPad app to the latest version...

  • What does "PfxCt" mean in a BGP session?

    A "sh ip bgp sum" gives a session in a "PfxCt" state. The session does not come up but stays in this state. What does this mean?

    Idle (PfxCt) - for prefix count over limit
    It means that you've probably configured a maximum number
    of prefix and you've reached such maximum number.

  • I have code error: 1 ? What does that mean please?

    I have code error: 1 ? It's appear during the installation.
    What does that mean please?

    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/

  • How could i get the kernel and user cpu usage for each process

    Hi all,
    In order to monitor the system CPU usage, I would like write a script to gather the kernel and user CPU usage for each process, like the prstat or top does. As always missing the shortlived kernel usage, prstat or top cann't get the precise CPU usage. I checked with the dtrace syscall, proc and fbt provider, but don't get which one is useful.
    Please provide your comments and suggestion.
    Thanks in adv

    mail2sleepy wrote:
    As I've studied the "dtrace" for a while, and seems Sun gives a pretty high score on this new feature.....I do want to know whether there's some probe can work for it, like writing a "dtrace" version prstat.You can write a prstat without dtrace. Because that's just polling at specific intervals and reading some process structures from /proc. You could have dtrace fire a probe every 5 seconds and read the same thing, but it wouldn't really be using any features of dtrace. Trhying to write it "in dtrace" doesn't make much sense.
    What you could do that would be harder via other methods is to fire a probe at process exit that displayed the process information including total CPU time. They could print exactly when processes exited. Doing that without dtrace would be very difficult.
    Darren

  • What does a * mean for checktable in dd03l?

    I  am looking at dd03l, there is a column checktable which tells the check table
    For the filedname in a given table tabname.
    I have seen following values in checkable:
    1. Blank u2013 no check table
    2. A table name such T005, it is the check table name
    3. * - a star
    I do not know what is the meaning of a *.
    Appreciate your answer?

    Hello,
    Did you check the "Supplementary Documentation" of the Data Element CHECKTABLE. It states & i quote:
    The entry *  indicates that the domain has a value table but no foreign key has been maintained for the field.
    Hope this clarifies your doubt.
    BR,
    Suhas

  • Decimal Point data for Stacked Column Chart

    Hi,
    I use a basic version of a Column chart for one of my projects. I use a stacked column chart with 2 data series namely "Expenses" & "Profit".
    I use decimal point numbers (with only two or three places after the decimal point) for both series.
    When I mouse over the bars of the output for tool tip, I view more numbers after the decimal point for some data.
    How to fix the decimal point to only 2 places & what is the reason for this behaviour?
    Attached is the sample output (output.gif) showing the above condition for the mentioned data.
    -Sen

    Create an toolTipShow event handler and use a NumberFormatter to set the precision of the numbers (sample code from LiveDocs):
    <?xml version="1.0"?>
    <!-- formatters\MainNumberFormatter.mxml -->
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
        <mx:Script>
            <![CDATA[
                // Define variable to hold the number.       
                [Bindable]
                private var bigNumber:Number = 6000000000.65;
            ]]>
        </mx:Script>
        <!-- Declare and define parameters for the NumberFormatter.-->
        <mx:NumberFormatter id="PrepForDisplay"
            precision="0"
            rounding="up"
            decimalSeparatorTo="."
            thousandsSeparatorTo=","
            useThousandsSeparator="true"
            useNegativeSign="true"/>
        <!-- Trigger the formatter while populating a string with data.-->
        <mx:TextInput text="{PrepForDisplay.format(bigNumber)}"/> 
    </mx:Application>

Maybe you are looking for

  • How can i remove message to upgrade if i don't want to upgrade

    I have a message in my settings telling me that i can upgrade my IOS, but i don't want to upgrade at this time. How can i get rid of the red message mark?

  • An error occured while sending mail - acrobat X

    I am having a problem sending .pdf files since most recent update of Adobe Acrobat to 10.1.6.  I scan a doc to my PC in a .pdf format, then try to email it.  I get the message noted above.  I can save the .pdf to my pc, then open it and send it by em

  • ADP and BSI

    Hi Team, Is BSI  same as ADP ?? ADP is a third-party payroll processing company in US. BSI is also a third-party payroll processing company?? As for my understanding BSI is used to calculate taxes in SAP .And ADP also calculate the net amount which w

  • Set font on a text

    Hi! I've got some problem with setting font on a text, this is my coed: var ar_delaney_e:Font = new ar_delaney(); textcount=1; //Setting a variable to     ar_delaney_e this["font_"+String(textcount)] = "ar_delaney_e"; //Create a textFormat var textFo

  • How do i designate osx as the primary operating system?

    I was finally able to install windows 7 professional on my new macbook pro.  But now when I boot up it automatically starts in windows unless i press the option key and select osx manually.  Any way to set osx as the default? Thanks in advance.