What is needed in a Mac Pro to start developing APPs?

I am looking for information on what Mac Pro (processor speed, memory, and storage capacity) is needed to start developing APPs.  In addition, I would like my Mac Pro be viable for the next three years as I learn how to use the system to build APPs and learn basic applications to build APPs as I anticipating changes in the iOS system and programs like Mountain Lion that could use more memory and storage capacity.  I am beginning this journey and like to know what system would best fit my needs as Apple continues to progress in their technologies.  What should I get in a Mac Pro with 8GB or 16GB, i5 or i7 processor, 256GB or 512GB storage, and 13 in. 2.8GHz or 15 in. 2.5 GHz?
Thank You

You could buy a new MacBook Air every two years and still come out ahead of what a base Mac Pro costs.
A Mac Pro is not going to go out of style in 4 years.
laptops or their parts are not upgradeable and do tend to fail a bit more. And some of those systems limit you to 16GB RAM but they do have (slower) M.2 SSDs (400 or 700MB/sec vs 1200-1400MB/sec) SSD blades.
If you want to run lots of code and VMs then maybe by accident you are in the right place
MacBook Pro

Similar Messages

  • Hi I am new on the Mac, I need help, how can I run my apps from my library on my Mac Pro?  All my apps I was used in my iPad, thanks guys!!!!

    Hi I am new on the Mac, I need help, how can I run my apps from my library on my Mac Pro?  All my apps I was used in my iPad, thanks guys!!!!

    The Mac OS X and iOS versions are separate products

  • Do I need a specific Mac Pro video card or will any do?

    Hi, I had a quick question. I'm looking at purchasing a 2010 8-core Mac Pro and was wondering about the video card. Is there a specific video card needed for the Mac Pro or can I purchase just a typical ATI 5870 from ebay and install that? Is there really a difference between a PC graphic cards and a Mac graphics card?

    Stick to the Apple cards. There is an important difference, and that is non-Apple cards do not work until the startup sequence is completed unless you use them on VGA. That means you cannot use any normal startup keyboard shortcuts unless the card is in VGA mode. This is because non-Apple cards do not have the Apple bootable ROM.
    Apple sells the 5870 directly on their website. And, there's nothing wrong with the 5770 card that comes with the Mac Pro. Be sure you really need the performance of the 5870 before spending the extra money for it.

  • Can I FaceTime with another Mac? What is needed on the Mac?

    Can I FaceTime with another Mac? What is needed on the Mac?

    Welcome to the Apple Support Communities
    You can call with FaceTime to a Mac with Mac OS X Snow Leopard with FaceTime, OS X Mountain Lion or Lion

  • Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad.  What's up??  How do I correct?  This is after upgrading to iOS6 and Mountain Lion.

    Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad.  What's up??  How do I correct?  This is after upgrading to iOS6 and Mountain Lion.

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • How much real world difference would there be between the 1600MHz memory of a 4,1 Mac Pro and the 800MHz memory of a 3,1 Mac Pro? My main app is multitrack audio with Pro Tools. Thanks so much.

    How much real world performance difference would there be between the 1600MHz memory of a 4,1 Mac Pro and the 800MHz memory of a 3,1 Mac Pro? My main app is multitrack audio with Pro Tools. Thanks so much. The CPU speed of either one would be between 2.8GHz and 3.0GHz.

    What are the differences.... firmware and build, there were tweaks to the PCIe bus itself. As a result 3rd party cards and booting is better.
    Support in 5,1 firmware for more 56xx and W35/36xx processors. Also memory timing.
    The 4,1 was "64-bit boot mode optional" and 5,1 was default. I don't know if there are changes but I assume so, even if it is not reflected elsewhere or in version number.
    I don't know what the prices are but 2009, to buy one today, when the 2010 is $1800.
    The 2008 of course was test bed for 64-bit UEFI and it sure seems even Lion and then ML are not as well engineered - outside of Linc who would be the least likely to have a problem.
    I would assume 2010 has better support for 8GB and even 16GB DIMMs as well as for 1333MHz.
    Nehalem family had only come out in fall 2008 and a lot of work went into making improvements well past 2009.
    If you remember, there were serious heat problems with those and 10.5.7+ up thru 10.6.2 even with iTunes, audio, and hyperthreading and cores hitting and staying in 80*C range. That I assume was both poor code (sleep does not mean poke and ask constantly) as well as changes in SMC and kernel improvements, to work around. Microcode can be patched in firmware, kernel, by drivers and by code, but it is best when the chips and core elements don't need to be.
    If someone is stretched, and can get 2009 for $1200 it might be a fine fit. That year offered the OEM GT120 which isn't really as nice and matched for today both OS and apps that rely on a GPU. And for odd reasons two such 120's don't work well in Lion+ but that is probably minor. Having the 5770 is just "nicer" though.
    There are some articles about trouble booting with PCIe SATA/SAS/SSD and less trouble with 2010. Also support for graphic card and audio I think was one of those "minor" 5770 related support issues. But shows some small changes were made there too.
    I wish someone would come out and pre-announce DDR4 + SATA3 along with PCIe 3.x (for bandwidth and more power per rail) along with say Ivy Bridge-E socket processors was going to be this summer's 3 yr anniversary and to replace the 2010 designed motherboard. But that is what is on Intel's and others drawing boards simmeringn in the pot.

  • My mac pro wont start. I push the power button and I get a click sound. A few seconds later another click sound and that it.

    My mac pro wont start. I push the power button and I get a click sound. A few seconds later another click sound and that it. I've tried different power plugs. Going direct into the wall, through a power strip. By iteslf, with other devices plugged in. I removed hard drives, and some RAM, and nothing. Sometimes it would not turn on, and then some minutes later it works. So its was sparatic, but now its been the same situation for three days where it wont turn on.
    I'm guessing power supply, but I wanted to see if anyone had a similar expereince and what the solution was, before I drag this beast to my local Apple store and have them look at it. Its a real pain to get it there and back and I want to be armed with some info for them. I already dragged this to them when it first started to do this, and of course it started up just fine for them. And you know if it works for the Genius then theres nothing wrong with. No matter what you explain to them.
    I figure if anyone had a the same problem and was able to resolve it, I can relate that experience to the Genius even if it start up for them.
    Thanks

    Try a SMC Reset using the extended method:
    Remove the AC power cord.
    Press the power-on button. [This drains the stored charge from the power supply]
    wait a quarter minute.
    Restore the power cord, being certain to JAM it into the socket, as the big block of rubber inhibits proper seating.
    wait a quarter minute
    attempt to power on.
    If no joy, examine the button battery half-hidden behind the graphics card. Remove it to measure the Voltage. A new battery should not cost over US$5, and measures a little over 3 Volts. BR-2032 is used in garage door opener controls and car door locks controls. The geeks at Radio Shack can measure it for you.

  • I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

    I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

    You will need a Mac, with OS X 10.6+ on it, to be able to develop iOS apps.
    There is some info on these pages :
    developer site : https://developer.apple.com
    developing for iOS 7 : https://developer.apple.com/ios7/
    developer support : https://developer.apple.com/support/
    developer forums : https://devforums.apple.com/index.jspa (you will need to be a registered developer to access them)

  • What do I need to start developing apps?

    Hello good people of the internet! I have a question about how I would start to develop apps for iOS, so I decided to come to the source.
    Here's my backround. I grew up with PC's and I love tinkering with things. I'm a PC gamer who loves to mod games and screw around with those kind of things. I'm a college student studying Aerospace Engineering, but I have pretty much no coding background. I have a PC laptop (2 year old Toshiba Qosmio), an iPhone 4s (in the shop because the battery's rusted), and an iPad Air. I am eager to learn to make iOS app because it is a skill that particularly interests me and it looks like fun.
    My question is, what do I need to do to start developing apps. I know I need a Mac, so what Macs have enough horsepower to develop apps? What coding language(s) do I have to learn? Where can I learn said coding language(s)? Where do I get the app development software, and how much does it cost? How do I get my finished apps onto the App Store?
    I thank the good people of this forum who have taken the time to view my question, and I give even more thanks to those who respond.
    Grazie mille!
    -Matt

    Any recent Mac will work.
    Check out https://developer.apple.com

  • HT3974 my mac pro doesnt start. it gives beep sound. internet recovery fail. please advice me

    My mac pro doesnt start. it gives beep sound at start. internet recovery fail. please hep me?

    You only bought it four months ago, so it's still under warrantly.
    Call Applecare or call your nearest Applestore to make an appointment. Tell them your mac has serious technical issues, describe them shortly.

  • Why my mac pro dont start stay download and turn back off

    My mac pro dont start stay download and turn back off

    Thisvis not MacBook territory but.... same applies - bootable backup clone of your system and iot should never crash or freeze but if it does then consider using Recovery Mode immediately and Safe Boot Mode.
    Your drive and its directory cannot be repaired without doing more.

  • What hardware, software, etc. is required to get started developing with iOS?

    What hardware, software, etc. is required to get started developing with iOS? Looking to get started...
    Thanks!

    You need an Intel Mac, at least OS X 10.6.8 (Lion if you intend full capability) and Xcode.
    See http://developer.apple.com/

  • What is prereq for reading above, and for start develop/reading with flex and cf(level?) ?

    http://www.adobe.com/devnet/flex/pdfs/getting_started_with_Flex3.pdf
    what is prereq for reading above, and for start develop/reading with flex and cf(level?) ?

    The Flex Quickstarts will be a place for starters, if you want to know 
    about Flex/CF integration the first to know would be some basics of CF.
    Sincerely,
    Michael
    Sent from my iPhone

  • What do I need for my MAC PRO to connect to my wirelessrouter in my home

    I have a Mac Pro 3.1 that i got from my old job.
    I now want to use it for my main computer and internet access.
    I have a PC that has my main modem and router in another part of house.
    I want to use the MAC Pro for my other computer - but connect to router wirelessly.
    Doesn't seem to be AIRPORT CARD installed in my MAC. Is that what I need to connect to the wireless router hooked up to my other computer?
    Help! If that is what I need I can get it in NYC tomorrow - but I want to be sure I'm getting what is needed to allow my MaC to recognize the wireless router in other room...
    Thanks.

    The airport wireless card should look like this:
    http://www.amazon.com/Apple-Wireless-Card-Mac-Pro/dp/B0012YYITW/ref=sr14?ie=UTF8&s=electronics&qid=1242362778&sr=8-4
    Since you're going to the apple store, have them install it, as it's not the easiest thing to do.

  • What SCSI card do i need for new Mac Pro?

    hello all, can anybody give me a straight answer on the cheapest SCSI card I can buy from UK, to fit in my Mac Pro. I have googled and searched the forums and am getting confused by talk of all the different types.
    I have borrowed an old neg scanner, which is SCSI only. The guy gave me a SCSI card as well, but it came from a PC. I figured I would chuck it in the Mac and see if it recognized it. Cue epic fail, because it appears only to fit in "backwards". that is with the scsi port facing into the case.
    No big deal I thought, I'll just buy one. I had no idea it would be so complicated.
    Speed of connection is not an issue to me, I just want it to work!
    Please help, thanks in advance
    stu.

    Hatter, thanks for the speedy reply. Can I only put in an expensive SCSI card? Why don't the cheapo 50 buck ones work? Sorry for being dense...
    I hear your point about cheapo USB scanners, but the SCSI one i got was free! Just looking to archive my years of negs and want to keep the costs to a minimum. Will defo check out firewire adapters though. good call.

Maybe you are looking for

  • How to add a column at the end of table in already designed document..?

    Hi, I am writing a javascript for adding a column at the end of table in Indesign document. using our plug-in we have created the Indesign document. Each table i want to add one extra column at the end. Is it possible..? please help me if anyone has

  • Can no longer edit text in my table on pages

    I just finished a mammoth report in Pages for which I used a table format for all the verbiage. I am now going back to edit some of the text in the table but when you click on the cell where the existing text is, it goes "white", and you can't edit w

  • XMLExportFormat and Crystal Reports for Eclipse 2.0

    Hello, I found this example code on the Crystal Reports for Eclipse wiki but can't find XMLExportFormat(s) classes in any jar. XMLExportFormatOptions is still referenced in javadoc even if it is useless as it needs the above mentioned classes. I real

  • Blank flash between SWF pages

    Hi all! I am building my first Flash website and have a small problem. I am building it using individual SWF files for each page. However, when I click a button to navigate from one page to another, I am getting a flashing blank screen for just a spl

  • AccessViolation in QueryContext object (c++)

    I am trying to prepare a query and am running into an exception. I've managed to drill down with the source code to find out what the problem is, and I've found the line giving me grief: QueryContext.cpp line 173:      for (nsi = namespaces_.begin();