What is ness plus and why did it become my home page?

I'm not sure where this page came from. I can't establish any other page as my home page. I tried uninstalling firefox & reinstalling it but ness is back.

I don't have homebooklinks in my add-on list, however this is what i found
#Go to about:config
# search for extensions.homebooklinks
# Double click on all the values that have nessplus and leave those fields blank
NOTE: This is a very dirty quick fix. Im still figuring out how homebooklinks got into my system.

Similar Messages

  • What is open dns, and why is it blocking my home page?

    I don't know what "open dns" is, but when I try and open my home page, a news site, I get a message that says "This domain has been blocked by your network administrator." This is my own computer, and I didn't block anything. It just started doing this today and goes to http://block.opendns.com/ when I try to open a window. I can still access other sites. I flushed the cache, which didn't change anything.

    Hello g:
    I clicked on that link and got a message that access was blocked by my network administrator. Since I do not have a network administrator, something is bogus.
    Open DNS is explained here:
    http://www.opendns.com/start/
    I used to use it, but have not found it necessary in my own world.
    Somehow something has changed your settings.
    I have not used it, but some people have had success with this software:
    http://www.dnschanger.com/
    Barry

  • HT1349 I updated my iphone (G3) and all of my apps are gone!  What can I do and why did this happen?

    I updated my iphone (G3) and all the apps are now gone!  What can I do and why did this happen? 

    Did you perform the update on a computer other than the one you normally sync to? Were the apps in the iTunes library on your computer BEFORE you performed the update?

  • Why did firefox change yahoo home page. Now different from IE

    For some reason the Yahoo home page which I always use has been changed on Firefox. On IE it is the good old home page that I not only like but was used to. I prefer Firefox as my browser but would like the regular Yahoo home page back. Any ideas?

    I have the same problem too. I had the same problem about two months ago and someone on here told me what to do. Unfortunately I did not write it down so i don't remember. I've tried, tools-options - advance - general - unchecked use hardware acceleration when available...it did not work. Yahoo main page looks perfect on IE, on Firefox it's a mess. Someone please help.

  • When I open my files to download my pictures from my iphone 6 plus, there is a windows icon with a hard drive.  What is that? And why can't I delete it?

    When I open my files to download my pictures from my iphone 6 plus, there is a windows icon with a hard drive.  What is that? And why can't I delete it?  I already reset my phone and a week later they came back. 

    I download my pictures by:
    !) Connecting my iphone to he computer.
    2) It will open a window or I will go to my computer and select iphone device.
    3) Open up Iphone folders and download.
    When I do that, I see a windows icon, with what looks to be a hard drive.  And when I click on it, it leads me back to my desktop.  Right now, I only have one.  I know by tomorrow I will have more.  It just keeps spreading. 

  • What is cookies.sqlite and why does it slow the start up of mozilla by a minute or so. I found it and deleted it,fixed the problem, but it reappears eveery time I restart mozilla.

    what is cookies.sqlite and why does it slow the start up of mozilla by a minute or so. I found it and deleted it,fixed the problem, but it reappears every time I restart mozilla.

    AVG reports these sqlite cookies each time firefox starts. they usually belong to tribalfusion or some other tracker. How do I block them in the first place. I thought firefox is a safe browser. Did not have this problem until I upgraded to 3.6.

  • I used to have eight genius mixes and now I have four...I changed the genres around and nothing happened...I've added many more songs since it changed from 8 to 4 mixes...how can I get more again and why did it go from 8 to 4?

    I used to have eight genius mixes and now I have four...I changed the genres around and nothing happened...I've added many more songs since it changed from 8 to 4 mixes...how can I get more again and why did it go from 8 to 4? I had the Hardcore mix and a rap mix and classic rock and grunge mixes...now I don't...I kinda want those back...the mixes I have now make no sense as most the songs on each do not correlate AT ALL to the genre mix they have been placed in. If someone could give me an answer that'd be great.

    1. Don't confuse "Apple ID" with iTunes Account ID.  You can have many Apple IDs but only one iTunes account active at a time.
    2. If you "changed" your iTunes account ID, you actually have 2 accounts - one under the old name plus the new name.
    3. You can't merge the accounts - they remain separate.  Apps purcahsed under the old account name will update ONLY WHEN THE PHONE IS SIGNED IN TO THE OLD ACCOUNT NAME  and visa versa.
    4. Likewise, you can sync only the apps, music, media purchased under the account the phone AND iTunes are signed in to.

  • Photo/Video editing PC build; what would you change and why?

    I'm in the planning phase of my first photo/video editing PC build.  I've done quite a bit of research to this point, and I've finally come to a decision on all of the components (I think).  After seeing how helpful everyone is on this forum, I decided to post my plan and see what everyone thinks.
    Miscellaneous info:  I am an amateur photographer looking to expand my horizons and venture into the video realm.  I will be running Windows 7 64bit with Adobe CS5 Production Premium and Lightroom 3 on a singe solid state drive and everything else will be on a 3 drive RAID 0 config.  Eventually I plan on purchasing a RAID card and a few more drives for a RAID 3 (or 5) config, but that won't be for a while.
    Ok, here's my planned build...
    Component
    Description
    Processor
    Intel   Core i7 - 950 3.06GHz Quad-Core Processor
    Motherboard
    ASUS   P6X58D-E LGA 1366 Intel X58 ATX Intel Motherboard
    Memory
    Corsair   Dominator 12GB (6 x 2GB) DDR3 1600 (PC3 12800) Triple Channel Memory
    System Drive
    Crucial   RealSSD C300 2.5" 128GB SATA III MLC Internal Solid State Drive
    Data Drive(s)
    3 - Western   Digital Caviar Black 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal   Hard Drive (Configured in RAID 0 for now)
    Optical Drive
    Pioneer   BDR-205BKS Blu-ray Burner
    Video Card
    EVGA   GeForce GTX 470 (Fermi) SuperClocked 1280MB 320-bit GDDR5 PCI Express 2.0 x16   HDCP Ready SLI Support Video Card
    Power Supply
    Corsair   HX Series CMPSU-850HX 850W ATX12V 2.3 / EPS12V 2.91 80 PLUS SILVER Certified   Modular Active PFC Power Supply
    Case
    LIAN   LI PC-A71F Black Aluminum ATX Full Tower Computer Case
    Monitor
    NEC   MultiSync PA271W-BK-SV 27" Widescreen LCD Monitor with SpectraViewII   Color Calibration Solution
    So, what would you change and why?
    I'm looking forward to your responses!

    "I'll take your advice and go with Samsung F3s.  With the money I save  (by not getting the WD Caviar Blacks), I'll add a 4th drive and use the  RAID5 on the mobo until I can afford to upgrade to a proper RAID  controller."
    I might be a bit late, but wanted to let you know about motherboard software RAID configs (at least mine):
    I have an older system running an ASUS P5AD2-E Premium MB containing a Silicon Image 3114 RAID chip. I originally configured a RAID 10 array with four 74 G Raptors for speed and redundancy. Figured if I lost a disc, I could just rebuid the array. Come to find out, the Sil 3114 chip does not support rebuilding the RAID 10 array.
    I had lost a disc (disc was okay, just power to the disc was interupted) so was running on three. Fixed my power problem, went to rebuild the array and couldn't. So I figured what is the point of having a RAID 10 that I couldn't rebuild. Went to a RAID 0 with a backup disk.
    Never checked the documentation to see if software RAID 5 through the SIl 3114 was rebuildable.
    Mind you, I am not a computer guru nor all knowledgable about software/harware based RAID configs. But after talking to others who are the guru's, I found that I should stay away from the motherboard software RAID arrays and they mirror what Harm said about hardware RAID boards. But on a budget, the RAID 0 with a backup drive works for me.
    Just my 2 cents to help.
    Tony

  • What is (en1) adapter and why am I not showing airport connection?

    Ok, so I'm in the network preference pane looking at three possibilities.
    1) Ethernet adapter (en1) which shows an IP and tells me I'm connected to the internet.
    2) Airport which is connected to my home network but does not have an IP and "cannot connect to the Internet"
    3) VPN (L2TP) which is configured but not connected.
    So, back to my original question. As I am obviously connected to the Linksys wireless router through the airport card, what is this en1 and why does it tell me I'm connected through it instead of the airport?
    Message was edited by: Trent Mckenica
    Message was edited by: Trent Mckenica

    I was (am) definitely connected. Just was a little confused as to why the Airport pane didn't show connectivity. I ended up going to sysprefs, choosing "Show: Network Port Configurations", and dragging the Airport to the top of the list. (It did show BOTH Airport and en0 network adapter as choices). After dragging Airport to the top of the list, the Airport TCP/IP pane showed the connectivity I expected to see in the first place. Really not an issue as I was always connected anyways, just not what I was used to seeing.

  • I lost all of my contact with yesterdays update.  Where are they and why did this happen?

    I lost all of my contact with yesterdays update.  Where are they and why did this happen?

    What update? There was nothing released yesterday relating to iCloud.
    Where have you lost your contacts from? Your computer, your phone, iCloud.com?
    If they are no longer in any of those places, you'll need to restore them from your most recent backup.

  • I resaved a draft email in yahoo mail on my ipod touch and it just disappeared - how do I get it back? And why did this happen?

    I resaved a draft email in yahoo mail on my ipod touch and it just disappeared - how do I get it back? And why did this happen?

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • HT201250 What is Airport Utility and why do I need to access this in order to backup my iMac using Time Machine...PLEASE??

    What is Airport Utility and why do I need to access Airport witeless devices in order to backup my iMac using Time Machine...HELP!!! PLEASE??

    AirPort Utility is required to configure an Apple AirPort Base Station or Time Capsule.
    Time Machine can use a Time Capsule or a locally connected volume. You only need to use AirPort Utility if you are using a Time Capsule.

  • What are smart mailboxes and why do i need both smart and "normal" ones?

    What are smart mailboxes and why do I need both smart and "normal" mailboxes?

    Hi Kingoftypos,
    Thanks for that clarification. So, now it appears that the ultimate purpose of a Smart Mailbox is to point to all emails that meet the criteria in a single place, so if they are spread among several mailboxes, you will be able to see them all together. Here is an article from Apple that describes it:
    A Smart Mailbox displays in one location messages that are stored in other mailboxes, so you don’t have to move messages between mailboxes. The messages displayed by a Smart Mailbox are based on criteria you define, and are automatically updated to include new messages that match your criteria. For example, you might create a Smart Mailbox that displays all messages found in all mailboxes from a specific sender.
    If you change a message in a Smart Mailbox, such as marking the message as read or unread, or moving or deleting the message, the change is reflected in the mailbox where the message is actually stored.
    So, adam, I would think that, if you had mail going to a lot of different places, and wanted to be able to see a particular set of those in a single place, you would use a smart mailbox. Maybe use the rules to direct your mail to different places to start with, but a smart mailbox to bring a set of common ones all together into a single smart mailbox?
    Maybe you have Rules move your Amazon mail to an Amazon folder and your Apple mail to an Apple folder, but then you have a Smart Mailbox that contains any mail that has the word "Receipt" in the Subject line?
    Just a thought....
    Cheers,
    GB

  • What are Layers? And why do I need them?

    WHAT ARE LAYERS? AND WHY DO I NEED THEM?
    Layers are an essential part of Photoshop. With Layers you can separate pictures or design elements from each other, as if they are stacked on pieces of glass. With all elements separate, you can move or change them independent of each other.
    Layers are used for many tasks, including improving your images' color or tone; merging two or more images in one Photoshop file; and creating Web designs and animations.
    LAYER BASICS - VIDEO 06:41 min.
    WORKING WITH LAYERS - VIDEO 11:16 min.
    KEY CONCEPT: LAYER
    PHOTOSHOP/ LAYERS BASICS - Reference Guide

    After creating the mask and applying adjustment, you can also adjust and change layer mask using selection tools or, the most common way, using brush tools.
    To have a more accurate preview of what are you doing, Alt + click on the layer mask thumbnail to show the mask in the image area.
    At this point, you will have a layer mask on your screen in large view, so it is easy to fine tune it, but you wont see how that affects your image.
    To seean  instant preview how changes on layer mask affects the adjustments, use New Window for (name of your image) from Window > Arrange.
    Here is a more detailed tutorial on the topic: New Window for.. Command in Adobe Photoshop.

  • When I click on a picture or a link, to take a closer look, I get a blank screen and it says at the top search bookmarks and history, at the bottom it says 'stopped' - what is this problem and why is it happening

    when I click on a link to complete a form, or a link to take a closer look at a picture, I get a blank screen and it says at the top 'search bookmarks and history', at the bottom it says 'stopped' - what is this problem and why is it happening ?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

Maybe you are looking for