What is "normal URL's load"? How does one do this?

I osted that my pwerbook showed 4 bars (wireless) but said I was not connected. I have had man, many problems with my MBP regarding connecting to the internet wirelessly.
iVmichael was kind enough to give the following response:
"That URL throws an error in every browser I try, do 'normal' URL's load OK ?"
What is a "normal URL load", and how do I do this.
Thanks for the help.

Normal URLs are sites like http://www.google.com or http://www.cnn.com and he is asking if those sites load normally (i.e. do you get the google search page or the CNN home page with the above links).

Similar Messages

  • I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one view a movie downloaded to the MacAir on a TV screen?

    I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?

    Welcome to Apple Support Communities
    That's exactly what you need. A Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US
    This is the only way to view a video on the TV. After connecting your MacBook Air to the TV, image on your TV should show immediately. Then, press Command and F1 keys to mirror your MacBook Air display, and open the video

  • I have 3G I Phone and just got new pc. Have run sync in I tunes but none of the songs, etc are being transferred from the Phone to the new computer. How does one accomplish this?

    I have a 3G I Phone and Just got a new PC. Have run a sync in I tunes but none of he songs, etc. in the I phone have transferred over. How does one accomplish this taks?

    Only iTunes purchases may copy over via File > Transfer Purchases - otherwise syncing is one way, from the computer to the device. To get the rest of your music/films etc onto the new computer you can copy the backup from your old computer onto the new one and then load them into iTunes

  • With my new macbook I attempted to open an older spreadsheet and get the following error message:  "This spreadsheet cannot be opened because ti is too old.  To open it, save it with numbers '09 first"  So how does one do this when I only have ver3.1?

    With my new macbook I attempted to open an older spreadsheet and get the following error message:  "This spreadsheet cannot be opened because ti is too old.  To open it, save it with numbers '09 first"  So how does one do this when I only have ver3.1?

    Numbers 3.x can only open Numbers '09 and later.  You will need Numbers '09 to open Numbers '08 files.
    If it is a single file (or only a few) you can email me and I will open and convert then email back.  My email address is in the "Biography" of my profile.
    You may have Numbers '09 installed.  Look in the folder "/Applications/iWork '09"  if Numbers is in that folder launch it, open the file you tried to open, and save.  Then you should be able to open in Numbers 3.x

  • HT1600 update Apple TV via settings general update software advise Apple support.  But Airplay won't display the Apple Tv because it needs an updated compatible software. Catch 22. How does one resolve this contradiction please? Paul

    update Apple TV via settings>general>update software advise Apple support.  But Airplay won't display the Apple Tv because it needs an updated compatible software. Catch 22. How does one resolve this contradiction please? Paul

    only the following macs support airplay mirror
    http://support.apple.com/kb/ht5404

  • Somehow I turned off the crosshair in the center of the Liquify tool. How does one turn this on/off?

    In PS CS 6, I somehow turned off the crosshair that used to be in the center of the Liquify tool. I'd like to get it back. How does one turn this on/off?

    The newest version of GPU Liquify now obeys the Photoshop preference "Show crosshair in brush tip" under cursors. Check this on in your prefs and you should be good to go.Non-GPU mode always has the crosshairs.
    The cursor ring was also improved to be thinner and less jagged. Also the crosshair size was reduced. Red rubylith was added to see the drag changes in density on vertical drags. Enjoy.

  • Getting Rid of TRIGGERS - Just How Does One Do This

    Hi,
    I have a trigger that I'm trying to get rid of in my DB.
    So logically, I attempt a
    DELETE TRIGGER triggername;
    But it doesn't work.
    Anyone have any idea how to do this?
    thank you.

    And the other thing you can do is stop posting duplicate threads.
    Getting Rid of TRIGGERS - How Does One Do This?

  • TS3406 I have an Iphone 4s.  When I make a phone call I cannot here the phone ring or the person on the other line pick up, unless I go to speaker phone.  How does one resolve this phone issue?

    I have an Iphone 4s.  When I make a phone call I cannot here the phone ring or the person on the other line pick up, unless I go to speaker phone.  How does one resolve this phone issue?

    Hi there MitchR12,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    -Griff W. 

  • Unable to regenerate /dev/rmt/0 drivers with cfgadm -c configure on Solaris 10 update 11 (1/13).  How does one do this for SAS HBA StorageTek Autoloader?

    How does one regenerate the /dev/rmt/0 when cfgadm -c configure <device> will not rebuild it?  Have attempted reboot -- -r, with modifing /kernel/drv/st.conf as well as /kernel/drv/sgen.conf.  Running on a SPARC T4-1 Solaris 10 updat3 11, (1/13).

    This has been resolved.  Getting the /etc/driver_aliases set correctly: # update_drv -d -i st; update_drv -d -i sgen; add_drv -m '* 0600 root sys' -i '"scsiclass,01" "scsiclass,08" wa' worked.  Making sure the st and sgen entries are in /etc/name_to_major were needed.  For the Simpana/CommVault WA drivers, in opt/simpana/WA/wa.conf with the name="wa" parent="fp" target=16 lun=0 fc-port-wwn="device's World Wide Number> added for each lun 0 to 7.  Then the touch /reconfigure; reboot worked.  First the c1::rmt/0 tape and c1::scsi/changer/<wwn> med-changer were mapped.  After modifying the minor_perm ('* 0600 root sys') and name_to_major entries, the WA CommValt entries , WA drivers showed up in cfgadm -al as c1::wa0  tape and c1::wa1  med-changer, only recognizable from CommVault.  Also had to update the SAS-2 HBA StoregTek Autoloader driver with patch 145648-05. Solaris 10 update 11 (1/13) comes with 145648-03.  In our particular case, we found cfgadm -al mapped SAS-2 HBA to c1 using the single mini-sas 6gb connector cable, where it mapped to c7 with the four tail connector.

  • HT1212 my niece lockup her ipod and don't remember password and/or it dont work now   there no access to setting to wipe and reformat  how does one do this

    How does one redo a 8GB ipod?  My neice has one and lock it with a password and now password dosen't work and/or she forgot it!  It give message ipod is diable!  connect to Itunes!  I've done that and the device doesn't showup in itunes, keep getting a message that password is needed!  But there no input for that on the phone either!  So I thought I would just dump and reformat and reinstall software, but I'm using windows and the device dosen't show up! Anyone!!!!! got a answer!
    Thanks

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Re : changing apps store. I live in Sydney Australia . I am stuck in the British App Store. The I Pad tells me to " switch to the Australian store". How does one accomplish this task. Many thanks.

    I live in Sydney Australia. I am stuck in the British apps store. The I Pad tells me to " switch to the Australian apps store". How does one accomplish such a task.
    Many thanks and greetings from sunny Sydney.

    Settings>iTunes & App Stores>Apple ID
    Tap your ID
    Tap View Apple ID
    Enter your password
    Go to Country/Region to change the store.

  • What is error code 603 and how does one fix it?

    What is error code 603, please, regarding add-on installation?  (The error codes page says for "error 6xx" to contact the Exchange online forum for assistance..)  It is a "failed online license check" for an add-on that is a free add-on listed on the Adobe Add-ons page as compatible with PS CS6, CC, and CC 2014, as well as all three versions of a bunch of other apps.  It is a Flypaper app, which looks to have been reworked to be compatible with the new 2014 apps.  Since Flypaper apps come from reliable source, I'm not sure what the error means, and I'm certainly not sure how to remedy this.  (The original Russell Brown Paper Textures Pro works fine on PS CC but isn't compatible with 2014.)
    I am running Win 7 64-bit.
    Thanks.
    Gail
    p.s.  numbers of other extensions still don't download  to PS 2014, so maybe this is also waiting for an Adobe fix??

    The add-on in question is called "Flypaper Select" (by Flypaper Textures).
    This morning, when I sent  the question, it was on last page of the free PS
    add-on list and showed the add-on as compatible with all three latest PS
    versions.  Tonight, when I click on the add-on in "my add-ons" list, it now
    shows compatibility only with PS6 and CC, and  I can no longer even find it
    in the big add-ons list.  I will try to send screen shot of "my add-ons" to
    the address you listed.  It is also below.
    Thanks for your help.  I have been finding many add-ons change from day to
    day, and many won't show up in Extensions window even though the desktop CC
    app says they have been installed.  I assume I am not the only person with
    these problems.
    Gail

  • How does one do this effect?

    The photo on the home page of this website has the dots around the edges, haven't seen this effect before.
    Can anyone tell me how this is done?
    Thanks!
    Robin
    http://lidosrestaurantpizza.com/index.html

    hey....
    This one is really simple, and it exists in PS for a long time...
    Filter > Pixelate > Color Halftone
    tomaxxi

  • How does one do this banner style in flash?

    http://www.billabong.com/au/
    Love it how they do that, are there websites where you can get a template and just insert your own pics? Or is there anyone who can help!?
    Cheers

    Try active den. very cheap and a bunch to choose from
    http://activeden.net/searches?term=banner+rotator&type=files

  • HT3176 how does one shut this **** thing off?

    Apple tv works great - can someone tell me how to turn it off?

    There is no on/off without cutting the power, only sleep mode.
    They use very little energy when inactive and only around 6W max when being used.
    AC

Maybe you are looking for