What is nVidia WDM captura driver???

I install the drivers for wdm video capture that I found in the msi web page for my msi fx 5200 TDR128 but I don't now what this driver is for. Also I get a code 10 in the device manager tha says the nVidia WDM video capture(universall) cannot start. it has a yellow mark on it. Does anybody how do make it work? What are this drivers for?
Thanks
PhanosP

WDM video capture are for... capturing video :D that is if your card has a video input. If you have video input on your card and you get a yellow "!", welcome to the club !!!
There is a bug (looks like it !) where the WDM drivers fails to load correctly with the main nVidia video drivers.
You can make it run properly by checking this thread . It worked for me. The only problem is that this is an old version driver that does not have all the latest features and I think it will not work for your FX.
You should not have problem with your new FX5600. Probably having error because your card does not have the video input.

Similar Messages

  • Hibernate or Stand by fails in WinXP after installing WDM capture driver

    Hi, I have an MSI MX440 card with video in and out.  The card works like I expected, games or capturing video works fine.  
    I first installed the card on my Windows 2000 machine, about a year ago.  After installing the WDM capture driver it stopped going in Stand by or hibernation mode.
    In the beginning of this year I bought a P4 configuration but I did not install the WDM driver.  Some time ago, I gave it another try on this system but since then I can no longer go into hiberation mode or stand by.  The computer says 'Preparing to go standby' and it does not work, it returns to the desktop with another message box 'System not in stand by', 'The WDM Video Capture driver universal device is qt the cause that the computer no longer goes into stand-by, if the problem keeps existing you will need qn updated devicedriver'.
    I have currently the Nvidia driver 2.1.20 running, the driver is not digataly signed.

    Hi, I have an MSI MX440 card with video in and out.  The card works like I expected, games or capturing video works fine.  
    I first installed the card on my Windows 2000 machine, about a year ago.  After installing the WDM capture driver it stopped going in Stand by or hibernation mode.
    In the beginning of this year I bought a P4 configuration but I did not install the WDM driver.  Some time ago, I gave it another try on this system but since then I can no longer go into hiberation mode or stand by.  The computer says 'Preparing to go standby' and it does not work, it returns to the desktop with another message box 'System not in stand by', 'The WDM Video Capture driver universal device is qt the cause that the computer no longer goes into stand-by, if the problem keeps existing you will need qn updated devicedriver'.
    I have currently the Nvidia driver 2.1.20 running, the driver is not digataly signed.

  • WDM Capture Driver: Device Cannot Start (Error 10)

    I have GeForce3 Ti200 with S-Video In, Out and TV out. I'm trying to run Virtual Dub to view my PS2, which is going into the S-Video In. It said I needed capture drivers, so I went to http://www.nvidia.com, got the ones that come with the Personal Cinema thing and installed them. Those didn't work. Came here and tried the drivers here, those didn't work. Tried other drivers and those didn't work. They all said "Device cannot start (Code 10)"
    I've tried 1.1.6, 1.1.7 and 1.1.9. Any ideas? I've searched on google and seen some stuff about turning off ACPI but I use ACPI, so I'm not willing to do that.

    God I love forums, cause 99.9% of the time someone else has encountered the same problem and then hopefully someone else who found a fix, posts that fix.
    http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=5847&boardid=9&sid=db40f75790c98440731e8c20eea03e5b
     Much thanks to Nixus, and everyone who had solutions, but I found a variation of Nixus' solution was what worked for me so that's what I'll recommend.
    "I downloaded the bios files from http://tw.msi.com.tw/autobios/SVga/Bios/Ms8850/v111/ and then downloaded NVFLASH.EXE and booted in dos and flashed the card i had to force the flash though it had some conflict of data or something but i knew it was the right bios and i had made a backup of the current one plust the card has dual bios so i wasnt too worried and it all worked out fine.
    Goodluck with gettin all your cards workin
    Cheers
    Nixus"
    This is what I did anyway:
    1) went to http://www.msi.com.tw and dragged the mouse over 'support' and then clicked on live updates 2. Installed this program.
    2) went to http://tw.msi.com.tw/autobios/SVga/Bios/Ms8850/v111/
     which Nixus brought up,
     and clicked on the install button. Which installed some other software to make this button work, then installed the flashing program. Held my breathe while it updated the vga bios, normally I'd do this from a clean dos 5.0 boot disk I have, and voila, problem fixed.
    Well, not quite. After installing updated vga bios, all nvidia drivers were zapped. Or at least not installed right.
    3) Add/remove programs, uninstall nvidia wdm drivers and vga driver for the 1 billionth time. Reboot.
    4) Install 30.82 whql certified ones, rebooted.
    5) Install wdm 1.19 drivers, reboot
    6) Go into system, and now instead of the exclamation point alongside the nvidia capture driver with that error, it just shows as working. Tried virtual dub, btw program rocks except for that 2 gig file limitation, and changed the source to composite and bingo, video in again.
    So long story short, I updated my 8850 to the updated bios, uninstalled all old nvidia drivers, installed 30.82 and then wdm 1.19 and it worky again. Haven't tried it with det4 drivers yet, didn't feel like pressing my luck.
     If you search in this vga forum using the word "capture" without the quotes, it seems this problem with the 8850 and others is QUITE common :(
     Whatever...updated bios fixed it for me...fine...so long as it's fixed. Bad enough I gotta boot into 98se to use my old large, legal sized mustek scanner on account of no win2k/xp drivers, don't want to have to boot into 98crash_edition ( well technically all 95-me could be called that ) everytime I want to cap something.

  • [Radeon] X800 XT PE WDM CAPTURE DRIVER PROBLEM

    I have a problem whit my MSI RX800 XT PE 256MB VIVO Edition
    My Specs:
    P4 3.2 Ghz Prescott
    Asus P4C800-E Mobo
    2 Gb DDR Ram Corsair
    Audigy 2 ZS
    Sata Raid (80gbx2)
    In the device manager i get and exclamation saying "this device cannot be initializated error code 10"
    I try EVERYTING in this world  , Install Catalyst versions 5.1, 5.2, 5.4, The new 5.5 , versions of 4.x, even 3.x, DNA drivers, Omega Drivers, Ati DAO thing so many of them  , MMC so many versions, even webtv, always using drivecleaner, i try updating the bios of my board, outdating the bios of my board, updating the bios of  my VIDEO CARD, REINSTALLING windows  , i try versions of windows xp whitout sp, whit SP1, whit SP2, I update the drivers of my board    , last direct X, changing the settings of the board, changing settings in windows, ....     even cleaning my card and is brand new, hummm and the conclusion.... always the same damm result the yellow thing sayin "error code 10, this device canot be initiblablabla....."
    What can I do, i need help, ati dont solve my problem , all the people say the same thing "reinstall here, drivers out of date, install the last version, bla bla bla" i know....
    Thanks for your help....

    You re not alone.
    Not problems like yours but....
    I get all the time "No signal"  trying to connect to TV or VCR.

  • Ti4200VTD8X & WDM Capture Malfunction

    Okay, this is my last attempt at fixing this problem before my card goes down to the 100 yard line for a little target practice.
    I have:
    Antec 1080 tower w/ 430W PS, 3.3V line running at 3.28V
    Asus P4S8X, AGP Driver loaded, BIOS updated
    512M Kingston DDR 2700, 1 stick
    MSI Ti4200VTD8X, 43.51WHQL Driver
    WD80Gb HD
    WinXP Home Sp1
    Blood type A Pos
    Shoe size 10
    Problem:
    When I load the WDM Capture Driver, v1.27 (or any other version for that matter), it will allow me to reboot, it PnP's the drivers, and works for that session.  When I reboot the system, it hangs up after the XP logo screen, and then reboots to safe mode.  I set it up to show the BSOD and it displays a DRIVER_IRQL fault with NVCAP.EXE.  I have to unload the WDM drivers for my computer to function.
    I went into the selective boot thingy from msconfig, and set the PCI IRQ's so they aren't dynamically assigned.  Didn't work.
    I've rolled my drivers forward and back, each time using detonator destroyer or just hacking the registry to remove all reference to Nvidia.  I have even tried the virgin chicken sacrifice and beta drivers.  Didn't work.
    In researching this issue, I've discovered that I am far from alone.  The problem with the WDM capture drivers and the Nvidia cards seems to be of epidemic proportions.
    The most consistent problem I see is those who install the WDM capture drivers are experiencing a code 10 error.  I get this too, but only after a reboot.  
    There are literally hundreds of postings on the net about this same issue.  Folks are updating their drivers religiously, and trying this or that.  Most of them are quite computer literate.  We have all had to become quasi engineers and programmers to deal with these problems that simply wouldn’t be tolerated in any other industry.  Think about it.  If you bought a new car and had to completely rework the engine before it would take you to the Quickie Mart for your daily ration of carbs, wouldn’t you be slightly irritated?  
    Why is it that we can’t expect to be able to plug in a device, let the nifty PnP feature load the drivers and have it work correctly the first time?  Why are we constantly on pins and needles waiting for that next driver update that may or may not solve the problem that everyone is experiencing?
    I spent a lot of time and money building my system.  I wanted a video card that I could play games and watch video on.  Instead, I spend my spare time hunting for the elusive fix for this weeks problem.
    Should I toss the Geforce and buy a Radeon?  Spend another $300?  I look at the forums for other chipsets, and they are having their problems too.  
    I’m sorry I’m on a soapbox, but we need to demand more of these companies who are taking our hard earned money for products that have no business being released until some/all of the bugs are worked out of them.

    Actually, I don't like cards that are display adapters and capture card combo. In the fact that not only quality will drop in fps and often problematic. Same to Radeon side... VIVO and All-In-Wonder...
    Your problem is most likely IRQ sharing, get us a list on your com's IRQ settings and we'll see if we can detect any error there.
    By the way, since you are so keen in having a multi-functional com, why not get a seperate DV/TV encoder/decoder card? They work better than VIVO and All-in-Wonder, and they only take out 1 PCI slot...
    All the Best... :D!!!

  • NVidia Capture Driver VS Leadtek TV Tuner problem

    I previously have used Leadtek WInfast TV Tuner 2000/XP before I installed MSI Geforce4MX 460-VTP with VIVO.
    I never installed the capture driver for the Geforce card though, because I do not see the need. Besides I prefer to use the tv tuner to record my tv programs.
    Another reason why I didn't install the NVidia capture driver is because I realize that it will cause some conflicts with the Leadtek TVTUner card driver because both are actually installing the same device drivers for the same tv-chip hardware located on both card.
    NVidia Capture Driver will install these hardwares in Device Manager:
    - Nvidia WDM Audio Capture
    - Nvidia WDM Crossbar
    - Nvidia WDM TVTuner
    - NVidia WDM Video Capture
    while, the Leadtek TVTUner driver will install the same driver for its own hardwares:
    - Winfast TV2000-XP Audio Capture
    - Winfast TV2000-XP Crossbar
    - Winfast TV2000-XP TVTuner
    - Winfast TV2000-XP Video Capture
    Surely installing Nvidia Capture driver & Leadtek TV TUner driver will cause WinXP confused because it finds 2 sets of the same hardwares.
    As I previously explained, I currently didn't install the Nvidia Capture Driver, and relies mainly on the Leadtek TVTuner to watch tv programs.  The problem is when I tried to use some recording softwares like TVTools, these softwares will only find the NVidia TV Tuner hardware instead of my Leadtek TV Tuner.  
    How could I solve this problem ?
    Is there any way to make both hardwares (Leadtek tv tuner & NVidia capture driver) work together ?

    It's got to be either a configuration issue or an incompatability with hardware because I have installed several of those cards on friends and client PC's without a single problem. I will say they all had nVidia VGA cards and either the nvidia or via chipset. I also have one and I can't find a better card for the $ and the ease of use, nice clean straight forward GUI and stability.
    Have you tried the latest drivers and PVS from leadtek's website?
    This thread should be in the VGA forum with a link here just in case a user with your mobo has this card.
    It's not in a shared slot is it? Have you looked for IRQ conflicts? Try removing the bluetooth and modem temporarily so you only have that one TV card, then check the IRQ's. If you have to move the card to another slot. The best slots are the second and third one down from the top (where the AGP slot is) and not the first and the last slot. Try operation then. Does this fix the problem? If so then you have to find the best slots for the BT and the modem.
    Good luck.

  • Error 10 - Nvidia WDM Video Capture (universal) - MSI G4MX460-VTP

    hi
    I have
    G4MX460-VTP - driver 4403
    Intel D850MV2
    Windows XP
    In the Hardware Administrator show the exclamation icon (!) in the Nvidia WDM Video Capture(Universal)
    I reinstall the driver origial from Cd and resolve this....but whe resstart the pc, show the exclamation icon again....
    please help me
    thanks
    Jorge
    PD. When download the last WDM driver for G4MX460-VTP¿?

    This is a image of error...please help me

  • Nvidia WDM Driver 1.23

     Drivers: Nvidia WDM Driver 1.23
    =>Posted by: Newsfactory.
    =>Thursday, February 27 @ 23:31:12 CET  
     A new Nvidia WDM driver 1.23 has been posted . This file is required for VIVO and Personal Cinema functionality with Nvidia display adapters. Wanna grab it?
    Download Nvidia WDM 1.23 driver  
     http://driver.gainward.com.tw/VGA/Driver/Nvidia/WDM/v1.23/WDM1.23.zip

    I had to reinstall windows several times today, and I was looking for the WDM drivers, and I thought for sure that there just had to have been an updated one.
    Thank you

  • Video capture driver for MSI GeForce 2 Pro video card

    Hi,
     I am in need of the nVidia WDM video capture driver for my Geforce 2 Pro video card. Model #M-8831. I was able to download it from the MSI/TW website over a year ago just fine. My computer crashed from a game bug a couple of months ago and MSI/TW does not list the capture driver I need any longer. I did email the company asking for help with no response back yet (after 2 weeks). You people may be my last hope.
     I do have the cd that came with the video card, but I've never been able to install the capture driver from it. There is a button to install it, but it never gets loaded. I've tried browsing the cd and also tried installing it using the windows wizards with zero results. My only successful install was from the MSI home website.
     If you need more information, please let me know.
     Thank you,
     Bruce ?(

    If you followed the second link it says this:
    Windows XP/2000/Me/98SE - WDM Driver v1.22
    Version: 1.22
    File Size: 1.1 MB
    Release Date: December 9, 2002
    Downloads
    » Primary Download Site «
    » Mirror Site 1
    » Mirror Site 2
    » Mirror Site 3
    Release Highlights:
    First stand-alone WDM driver release for Personal Cinema and VIVO-enabled products.
    Right there at the end it says Release Highlights and says specifically that it's what you want...
    Read my man, read...
    Cheers!! 8)

  • MSI-8833 (GF2 MX400) Probs with the CAPTURE driver

    When I run LIve update, it shows me the BIOS and driver for the graphics card. But when  I'm installing the CAPTURE driver from MSI web page, Live update doesn't rekognize my MSI 8833 graphics card as an MSI or Live updateable graphics card any more?
    What to do?

    It will be easier to manually update drivers from Msi download page
    or Nvidias download page.
    Alot of people have trouble with the LiveUpdate features, sometimes resolved after reinstall LiveUpdate.

  • Alternative to nVidia WDM Drivers

    My Configuration:
    Hello, I am having a lot of problems with the nVidia WDM drivers (all versions) and MSI Media Center II (w.patch).
    I am using Pal-B and have tried using all the Pal modes, can't use NTSC/Secam.
    I have a MSI GeForce FX 5600 256MB (VTDR-256) with Remote and a ViVo connector.
    The Problem:
    The problem that I am having is whenever I run Media Center II, and try to record something, after some time, say 10 or 20 minutes I get a blue screen and the system reboots.
    Error Messages:
    The blue screen has the following information on it:
    IRQ_LESS_OR_EQUAL_
    After the line which says STOP*----
    nv4_mini.sys
    Temporary Solution:
    If I switch to NTSC the programs record fine and I don't any blue screen, however since my TV system is PAL and switching to any NTSC mode gives me the small problem of 1/4 picture being cropped from the bottom.
    Could someone tell me of some other program that I can use, to record my TV shows besides Media Center II or maybe a different driver that won't give me this error.
    I have tried the trial version of Ulead Media Studio but the problem is that the program records and each show is of about 3-4GB in size, I need a program which records in good quality and small size as well.
    I have also tried Dr.DivX but I can't seem to capture anything using that program.
    Also, I have looked at other threads but have not found any help yet.
    Thread #1
    Thread #2
    Thread #3

    This might help :
    http://www.microsoft.com/downloads/details.aspx?FamilyID=8dfd1b6d-e177-4a0e-91d0-b4310675b02b&DisplayLang=en

  • Xorg 1.8 - nvidia 96xx legacy driver

    Since a few weeks I use Archlinux and I'was happy with it until my last upgrade. After this (incl. kernel 2.6.34 and xorg 1.8) I was lost in the dark. Googling learned me that the nvidia 96xx legacy driver (I have an old Geforce card) cannot cope with xorg 1.8 (yet??). Could this be better coordinated in the future?
    If not, can someone please explain (in simple terms, I'm a newbie, what to do if such things happen).
    Thanks in advance.

    Lets see (long post)
    uname -a
    Linux mediacenter 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686 Intel(R) Pentium(R) 4 CPU 3.00GHz GenuineIntel GNU/Linux
    [ 11.364]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 11.364]
    X.Org X Server 1.8.1.902 (1.8.2 RC 2)
    Release Date: 2010-06-21
    [ 11.364] X Protocol Version 11, Revision 0
    [ 11.364] Build Operating System: Linux 2.6.34-ARCH i686
    [ 11.364] Current Operating System: Linux mediacenter 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686
    [ 11.364] Kernel command line: root=/dev/sda1 ro fastboot quiet 4
    [ 11.364] Build Date: 21 June 2010 11:54:27AM
    [ 11.364]
    [ 11.378] Current version of pixman: 0.18.2
    [ 11.378] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 11.378] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 11.378] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 28 02:17:21 2010
    [ 11.401] (==) Using config file: "/etc/X11/xorg.conf"
    [ 11.401] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 11.450] (==) ServerLayout "Layout0"
    [ 11.450] (**) |-->Screen "Screen0" (0)
    [ 11.450] (**) | |-->Monitor "Monitor0"
    [ 11.450] (**) | |-->Device "Device0"
    [ 11.450] (**) |-->Input Device "Keyboard0"
    [ 11.450] (**) |-->Input Device "Mouse0"
    [ 11.450] (==) Automatically adding devices
    [ 11.450] (==) Automatically enabling devices
    [ 11.503] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 11.503] Entry deleted from font path.
    [ 11.503] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 11.503] Entry deleted from font path.
    [ 11.521] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 11.521] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 11.521] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 11.521] (WW) Disabling Keyboard0
    [ 11.521] (WW) Disabling Mouse0
    [ 11.521] (II) Loader magic: 0x81e9d00
    [ 11.521] (II) Module ABI versions:
    [ 11.521] X.Org ANSI C Emulation: 0.4
    [ 11.521] X.Org Video Driver: 7.0
    [ 11.521] X.Org XInput driver : 9.0
    [ 11.521] X.Org Server Extension : 3.0
    [ 11.531] (--) PCI:*(0:1:0:0) 10de:0181:1462:9350 nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] rev 164, Mem @ 0xfb000000/16777216, 0xf4000000/67108864, BIOS @ 0x????????/131072
    [ 11.531] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 11.531] (II) LoadModule: "extmod"
    [ 11.580] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 11.589] (II) Module extmod: vendor="X.Org Foundation"
    [ 11.589] compiled for 1.8.1.902, module version = 1.0.0
    [ 11.589] Module class: X.Org Server Extension
    [ 11.589] ABI class: X.Org Server Extension, version 3.0
    [ 11.589] (II) Loading extension MIT-SCREEN-SAVER
    [ 11.589] (II) Loading extension XFree86-VidModeExtension
    [ 11.589] (II) Loading extension XFree86-DGA
    [ 11.591] (II) Loading extension DPMS
    [ 11.591] (II) Loading extension XVideo
    [ 11.591] (II) Loading extension XVideo-MotionCompensation
    [ 11.591] (II) Loading extension X-Resource
    [ 11.591] (II) LoadModule: "dbe"
    [ 11.608] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 11.618] (II) Module dbe: vendor="X.Org Foundation"
    [ 11.618] compiled for 1.8.1.902, module version = 1.0.0
    [ 11.618] Module class: X.Org Server Extension
    [ 11.618] ABI class: X.Org Server Extension, version 3.0
    [ 11.618] (II) Loading extension DOUBLE-BUFFER
    [ 11.619] (II) LoadModule: "glx"
    [ 11.619] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 12.050] (II) Module glx: vendor="NVIDIA Corporation"
    [ 12.050] compiled for 4.0.2, module version = 1.0.0
    [ 12.050] Module class: X.Org Server Extension
    [ 12.050] (II) NVIDIA GLX Module 96.43.16 Thu Jan 28 16:14:25 PST 2010
    [ 12.050] (II) Loading extension GLX
    [ 12.050] (II) LoadModule: "record"
    [ 12.051] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 12.061] (II) Module record: vendor="X.Org Foundation"
    [ 12.061] compiled for 1.8.1.902, module version = 1.13.0
    [ 12.061] Module class: X.Org Server Extension
    [ 12.061] ABI class: X.Org Server Extension, version 3.0
    [ 12.061] (II) Loading extension RECORD
    [ 12.061] (II) LoadModule: "dri"
    [ 12.061] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 12.074] (II) Module dri: vendor="X.Org Foundation"
    [ 12.074] compiled for 1.8.1.902, module version = 1.0.0
    [ 12.074] ABI class: X.Org Server Extension, version 3.0
    [ 12.074] (II) Loading extension XFree86-DRI
    [ 12.074] (II) LoadModule: "dri2"
    [ 12.074] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 12.075] (II) Module dri2: vendor="X.Org Foundation"
    [ 12.075] compiled for 1.8.1.902, module version = 1.2.0
    [ 12.075] ABI class: X.Org Server Extension, version 3.0
    [ 12.075] (II) Loading extension DRI2
    [ 12.075] (II) LoadModule: "nvidia"
    [ 12.084] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 12.137] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 12.137] compiled for 4.0.2, module version = 1.0.0
    [ 12.137] Module class: X.Org Video Driver
    [ 12.137] (WW) NVIDIA: This server has an unsupported input driver ABI version (have 9.0, need < 8.0). The driver will continue to load, but may behave strangely.
    [ 12.175] (II) NVIDIA dlloader X Driver 96.43.16 Thu Jan 28 16:02:25 PST 2010
    [ 12.176] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 12.176] (--) using VT number 4
    [ 12.178] (II) Primary Device is: PCI 01@00:00:0
    [ 12.178] (II) Loading sub module "fb"
    [ 12.178] (II) LoadModule: "fb"
    [ 12.178] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 12.189] (II) Module fb: vendor="X.Org Foundation"
    [ 12.189] compiled for 1.8.1.902, module version = 1.0.0
    [ 12.189] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 12.190] (II) Loading sub module "ramdac"
    [ 12.190] (II) LoadModule: "ramdac"
    [ 12.190] (II) Module "ramdac" already built-in
    [ 12.211] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 12.211] (==) NVIDIA(0): RGB weight 888
    [ 12.211] (==) NVIDIA(0): Default visual is TrueColor
    [ 12.211] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 12.211] (**) NVIDIA(0): Option "DPI" "96x96"
    [ 12.214] (**) NVIDIA(0): Enabling RENDER acceleration
    [ 12.214] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    [ 12.214] (II) NVIDIA(0): enabled.
    [ 12.706] (II) NVIDIA(0): NVIDIA GPU GeForce4 MX 440 with AGP8X at PCI:1:0:0 (GPU-0)
    [ 12.706] (--) NVIDIA(0): Memory: 65536 kBytes
    [ 12.706] (--) NVIDIA(0): VideoBIOS: 04.18.20.07.23
    [ 12.706] (II) NVIDIA(0): Detected AGP rate: 8X
    [ 12.706] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 12.706] (--) NVIDIA(0): Connected display device(s) on GeForce4 MX 440 with AGP8X at
    [ 12.706] (--) NVIDIA(0): PCI:1:0:0:
    [ 12.706] (--) NVIDIA(0): LG TV (CRT-0)
    [ 12.706] (--) NVIDIA(0): LG TV (CRT-0): 350.0 MHz maximum pixel clock
    [ 12.707] (II) NVIDIA(0): Assigned Display Device: CRT-0
    [ 12.707] (II) NVIDIA(0): Validated modes:
    [ 12.707] (II) NVIDIA(0): "856x481"
    [ 12.707] (II) NVIDIA(0): Virtual screen size determined to be 856 x 481
    [ 12.707] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
    [ 12.707] (--) Depth 24 pixmap format is 32 bpp
    [ 12.709] (II) NVIDIA(0): Initialized GART.
    [ 12.720] (II) NVIDIA(0): Built-in logo is bigger than the screen.
    [ 12.728] (II) NVIDIA(0): Setting mode "856x481"
    [ 12.813] (II) Loading extension NV-GLX
    [ 12.824] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    [ 12.840] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    [ 12.850] (==) NVIDIA(0): Backing store disabled
    [ 12.850] (==) NVIDIA(0): Silken mouse enabled
    [ 12.852] (**) NVIDIA(0): DPMS enabled
    [ 12.852] (II) Loading extension NV-CONTROL
    [ 12.852] (==) RandR enabled
    [ 12.852] (II) Initializing built-in extension Generic Event Extension
    [ 12.852] (II) Initializing built-in extension SHAPE
    [ 12.852] (II) Initializing built-in extension MIT-SHM
    [ 12.852] (II) Initializing built-in extension XInputExtension
    [ 12.852] (II) Initializing built-in extension XTEST
    [ 12.852] (II) Initializing built-in extension BIG-REQUESTS
    [ 12.852] (II) Initializing built-in extension SYNC
    [ 12.852] (II) Initializing built-in extension XKEYBOARD
    [ 12.852] (II) Initializing built-in extension XC-MISC
    [ 12.852] (II) Initializing built-in extension SECURITY
    [ 12.852] (II) Initializing built-in extension XINERAMA
    [ 12.852] (II) Initializing built-in extension XFIXES
    [ 12.852] (II) Initializing built-in extension RENDER
    [ 12.852] (II) Initializing built-in extension RANDR
    [ 12.852] (II) Initializing built-in extension COMPOSITE
    [ 12.852] (II) Initializing built-in extension DAMAGE
    [ 12.856] (II) Initializing extension GLX
    [ 13.318] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 13.318] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 13.318] (II) LoadModule: "evdev"
    [ 13.318] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 13.326] (II) Module evdev: vendor="X.Org Foundation"
    [ 13.326] compiled for 1.8.0, module version = 2.4.0
    [ 13.326] Module class: X.Org XInput Driver
    [ 13.326] ABI class: X.Org XInput driver, version 9.0
    [ 13.326] (**) Power Button: always reports core events
    [ 13.326] (**) Power Button: Device: "/dev/input/event4"
    [ 13.333] (II) Power Button: Found keys
    [ 13.333] (II) Power Button: Configuring as keyboard
    [ 13.333] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 13.333] (**) Option "xkb_rules" "evdev"
    [ 13.333] (**) Option "xkb_model" "evdev"
    [ 13.333] (**) Option "xkb_layout" "us"
    [ 13.377] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 13.377] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 13.377] (**) Power Button: always reports core events
    [ 13.377] (**) Power Button: Device: "/dev/input/event2"
    [ 13.387] (II) Power Button: Found keys
    [ 13.387] (II) Power Button: Configuring as keyboard
    [ 13.387] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 13.387] (**) Option "xkb_rules" "evdev"
    [ 13.387] (**) Option "xkb_model" "evdev"
    [ 13.387] (**) Option "xkb_layout" "us"
    [ 13.387] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 13.387] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 13.387] (**) Sleep Button: always reports core events
    [ 13.387] (**) Sleep Button: Device: "/dev/input/event3"
    [ 13.397] (II) Sleep Button: Found keys
    [ 13.397] (II) Sleep Button: Configuring as keyboard
    [ 13.397] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    [ 13.397] (**) Option "xkb_rules" "evdev"
    [ 13.397] (**) Option "xkb_model" "evdev"
    [ 13.397] (**) Option "xkb_layout" "us"
    [ 13.401] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 13.401] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 13.401] (**) AT Translated Set 2 keyboard: always reports core events
    [ 13.401] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 13.410] (II) AT Translated Set 2 keyboard: Found keys
    [ 13.410] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 13.410] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 13.410] (**) Option "xkb_rules" "evdev"
    [ 13.410] (**) Option "xkb_model" "evdev"
    [ 13.410] (**) Option "xkb_layout" "us"
    [ 13.411] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
    [ 13.411] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
    [ 13.411] (**) ImPS/2 Generic Wheel Mouse: always reports core events
    [ 13.411] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
    [ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
    [ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
    [ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found relative axes
    [ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
    [ 13.423] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
    [ 13.423] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
    [ 13.423] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 13.423] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
    [ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
    [ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
    [ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
    [ 13.424] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
    [ 13.424] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
    [ 13.424] (II) No input driver/identifier specified (ignoring)
    [ 13.424] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
    [ 13.424] (II) No input driver/identifier specified (ignoring)
    [tigtex@mediacenter ~]$ glxgears
    Running synchronized to the vertical refresh. The framerate should be
    approximately the same as the monitor refresh rate.
    7096 frames in 5.0 seconds = 1419.008 FPS
    7110 frames in 5.0 seconds = 1421.859 FPS
    7111 frames in 5.0 seconds = 1422.168 FPS
    01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a4)
    [tigtex@mediacenter ~]$ lsmod | grep nvidia
    nvidia 4657813 22
    i2c_core 15144 2 i2c_viapro,nvidia
    agpgart 23120 2 nvidia,via_agp
    [root@mediacenter tigtex]# pacman -Syu
    :: Synchronizing package databases...
    testing is up to date
    core is up to date
    extra is up to date
    community is up to date
    :: Starting full system upgrade...
    there is nothing to do
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Jan 28 16:14:36 PST 2010
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 30.0 - 110.0
    VertRefresh 50.0 - 150.0
    Option "DPMS"
    Option "DPI" "96x96"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "856x481"
    EndSubSection
    EndSection
    pacman -Qs nvidia
    local/libvdpau 0.4-1
    Nvidia VDPAU library
    local/nvidia-96xx 96.43.16-3
    NVIDIA drivers for kernel26, 96xx branch.
    local/nvidia-96xx-utils 96.43.16-1
    NVIDIA drivers utilities and libraries, 96xx branch.
    Good luck with the mistery.
    I didn't use anything else to install nvidia-96xx, it was with pacman. nvidia-96xx is no longer on repos but it was when i made the setup. I dont see why they removed it. Works 100% good here on my SD plasma. Even with games and xbmc.
    Last edited by TigTex (2010-06-28 01:36:03)

  • Help with Capture Drive

    When I try to capture from my DV cam I get an error message " current capture drives are too full..." I tried to remove files/set another scratch disk location but the same error appears. What should I do?
      Mac OS X (10.4.9)  

    Hi:
    Should we log them instead?
    It's good practice !!
    About Capture Now, ckeck your FCP System Settings, in the Scratch Disks tab you'll find in the very low end the option Limit Capture Now To: and check how much time in minutes is selected. Select just the time you need to capture and try unchecking the limit option.
    Another option is the Minimum Allowable Free Space On Scratch Disks: option in the same preferences tab.
    Check those options and try again.
    Hope that helps !
      Alberto

  • Nvidia Open GL driver error when Photoshop CC is open

    New PC, bought predominantly for Photoshop use. Downloaded trial of Photoshop CC and it keeps closing with this message -
    "Nvidia Open GL Driver detected a problem with the display driver and is unable to continue. Tha application must close. Error Code 3"
    This has happened with Photoshop just being open, as well as when in use.
    If I untick "use graphics processor", I have no problems. My use of Photoshop is fairly basic (processing and editing photographs from a Nikon D7100), so I don't know what I will miss if I don't use the graphics processor.
    Intel i7-3770 Quad Core (3.4ghz 8mb cache)
    16gb DDR3 1866 mhz
    2GB Nvidia GeForce GTX660 graphics card
    Windows 7 professional 64 bit
    I have updated the graphics card driver, which made no difference. Can anyone help with suggestions of why I'm getting the error, and what I can do about it please?
    Thank you
    Chris

    Had to re-install windows and all drivers for other reasons, and having downloaded Photoshop CC again, I no longer have the problem.
    Chris

  • Dv6809wm nvidia Ethernet Controller driver help me please.

    My notebook is a dv6809wm. I am Korean, but also the This is South Korea.
    After installing Windows 7, nvidia Ethernet Controller, driver can not find.
    Windows xp, Vista, 7, installed it several times, nvidia Ethernet Controller driver can not find. Chipset nvidia 630a, installing, and even install sp37730, the Internet should not.
    What should I do? You help me please.

    This used to be a sticky post but should have your answers. Install the AMD chipset driver for the dv65zz and higher AMD models. This is a Vista driver and may have to be run in compatibility mode but will provide ethernet functionality:
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Windows-7-Upgrade-Guide-for-dv6...
    It is a long post but the AMD chipset driver is near the top. I see you already tried SP37730 and it is not working for you so you may have to do a manual install by pointing the driver installer to the subfolder where sp37730 unzips, containing the ethernet and make it take the ethernet driver .inf file. 
    You may also want to try one of these drivers:
    http://www.win-raid.com/t15f37-NVIDIA-Optimized-nForce-Driverpacks-for-Vista-Win.html
    Use the ones labelled:    3. "Special MCP65-67 nForce Driverpacks for Vista/Win7"
    Post back if you need more help with this. 

Maybe you are looking for