What is partner name and product part code in 'Back to college' form.

Is Product number and product part code is same.

Hello ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works,
this post has instructions. Please let me know if this information was helpful by clicking the thumbs up below.
Have a great day!

Similar Messages

What are the names and the parameters of the SSIS reports

what are the names and the parameters of the SSIS reports
(delivered with and included in the SSMS)
to navigate from my reports to the build in reports
it's necessary to know the reportname and the parameters.
I want to "combine" respectively want to navigate
from custom reports (works excellent) to the 5 build in reports
please have a look at the attached picture and in particular
to the blue arrow.SSIS_ReportsNavigation
thank you for providing an answer or a hint.

to navigate from my reports to the build in reports
Those integrated reports in SSMS are not hosted in SSRS, so there is no URL available where you can navigate to.
The reports run in client side rendering mode = RDLC.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Profile values for specifically if enter section name and product name

I have tried to get Profile values with the following query,
SELECT *
FROM fnd_profile_options_vl po,
fnd_profile_option_values pov,
fnd_user usr,
fnd_application app,
fnd_responsibility rsp,
fnd_nodes svr,
hr_operating_units org
WHERE 1 = 1
AND pov.application_id = po.application_id
AND pov.profile_option_id = po.profile_option_id
AND usr.user_id(+) = pov.level_value
AND rsp.application_id(+) = pov.level_value_application_id
AND rsp.responsibility_id(+) = pov.level_value
AND app.application_id(+) = pov.level_value
AND svr.node_id(+) = pov.level_value
AND org.organization_id(+) = pov.level_value
Suppose I need to populate the profile values for specifically if I enter section name and product name.
How can I do that ???

Hussein Sawwan wrote:
Thanks, I have gone through the documentation,I can get all profile values.But how can I get the profile values and names that is related to/affects a particular product.
Is there any connection between products/items with profile option.No. However, you may run the same queries using the follows:
For example ..
For GL --> PROFILE_OPTION_NAME like '%GL%'
For AR --> PROFILE_OPTION_NAME like '%AR%'
And so on.
Please note that the above will not return all profile options that affect (or related to) specific module.
You can also get the list of profile option which are set at the Application/Responsibility level.
Thanks,
Hussein
>
Thanks, I have gone through the documentation,I can get all profile values.But how can I get the profile values and names that is related to/affects a particular product.
Is there any connection between products/items with profile option.No. However, you may run the same queries using the follows:
For example ..
For GL --> PROFILE_OPTION_NAME like '%GL%'
For AR --> PROFILE_OPTION_NAME like '%AR%'
And so on.
Please note that the above will not return all profile options that affect (or related to) specific module.
You can also get the list of profile option which are set at the Application/Responsibility level.
Thanks,
Hussein
Hussein ,
Can I use following query to retrieve the profile values for an item with m.msite_id =10218 AND s.section_id =10591 and i.organization_id = 204 and i.inventory_item_id =66567
select distinct *
FROM fnd_profile_options_vl po,
fnd_profile_option_values pov,
fnd_user usr,
fnd_application app,
fnd_responsibility rsp,
fnd_nodes svr,
hr_operating_units org,
ibe_msites_tl m,
ibe_dsp_sections_tl s,
mtl_system_items_b i
where
pov.application_id = po.application_id
AND pov.profile_option_id = po.profile_option_id
AND usr.user_id(+) = pov.level_value
AND rsp.application_id(+) = pov.level_value_application_id
AND rsp.responsibility_id(+) = pov.level_value
AND app.application_id(+) = pov.level_value
AND svr.node_id(+) = pov.level_value
AND org.organization_id(+) = pov.level_value
and m.msite_id =10218
AND s.section_id =10591
and i.organization_id = 204
and i.inventory_item_id =66567
Anything wrong here???
Thanks

Truly dumb question. How do I get PS to actually complete a command, eg straighten an horizon, and finalise the change. Even doing a "save as" with a new file name and reloading brings the image back, straightened, but with the skewed back ground frame st

Truly dumb question. How do I get PS to actually complete a command, eg straighten an horizon, and finalise the change. Even doing a "save as" with a new file name and reloading brings the image back, straightened, but with the skewed back ground frame still there. Is there a "apply change" or similiar command that I simply cannot see.

brings the image back, straightened, but with the skewed back ground frame
PSE did what you told it to do. Choose the Straighten and crop edges or fill edges options when you use the straighten tool if you want it to do more than just straighten the contents of the image. Many people prefer the plain straighten because they'd rather crop themselves than let PSE do it.

I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported. What does this mean, and how do I get back all my photos and fix this? thanks.

I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported. What does this mean, and how do I get back all my photos and fix this? thanks.

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know some details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what fixes have you tried?
where is you library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

MAC OSX 10.5.8 and 2TB Time Machine would not back up. Saw discussion that suggested you change name without apostrophes etc. Went into Time Machine and did a manula backup without a name and it appears to be backing up now. Does this remove delete the o

MAC OSX 10.5.8 and 2TB Time Machine would not back up. Saw discussion that suggested you change name without apostrophes etc. Went into Time Machine and did a manula backup without a name and it appears to be backing up now. Does this remove delete the old backup's ?

Does this remove delete the old backup's ?
No, they are all just fine.

What are pin names and numbers rotated?

I copied an existing schematic symbol into my user data base, changed the part number and saved it. Then I placed the component into the schematic and the pin names and numbers were totally screwed up. All vertical names and numbers were rotated horizontal.
See the attached picture. On the left is the image shown in the "Select a Component" dialog. On the right is what I get when I place the component.
WYSINWYG!
How do I correct this, and is this going to happen every time I place a component with vertical labels?
Phil
Solved!
Go to Solution.
Attachments:
screwed up symbol.jpg ‏235 KB

The original component a FT 232DM, but this is no longer manufactured. The FT232BL is a pin for pin replacement. All I wanted to do was change the component name.
I copied the FT232DM from the schematic sheet into my User Database. Then I opened the component in the Symbol Editor, changed the name to FT232BL, and saved it into my User Database. What you see in the image posted earlier are the symbol as it appears in the Symbol Editor (left) and as it appears after I placed the FT232BL into the schematic.
I have solved the problem - I can't wait days and days for a Tech Support answer on a job with a short deadline.
I edited the component in Symbol Editor and changed pin rotation from Auto to horizontal or vertical as appropriate. Then when the part was placed in the schematic the vertical pin names and numbers appeared as they should.
It is very peculiar that the program displays the symbol one way in the Symbol Editor and then places it in the schematic with a different configuration. The way the user designs the part in the Symbol Editor is the way the part should be placed in the schematic.
Phil

What is user name and password for SLES10 SP1 SAP Version

Hello,
In order to install SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition , I download SLES10 SP1 Vmware SAP version from novell, when I played SLES10SP1_Test_Drive.vmx,
the suse linux enterprse server was start. It asked me to input user name and password. I input slesuser and password is novell. But it was not correct. Who knows what user name and password I need input?
any help ?
Best Regards,
George

Hi
I have the same issue, I tried user root and password root doesn't work I've tried couple fo "stupid" word or root user but didn't work
Looks like we both missing file "index.html" so I suppose this is bug from Novell and SAP
I will let you know if I found anything.
Peter
See this forum you question
Where to download SLES10 SP1 SAP Version?

How to manage spare parts and production parts seperately

Hello,
I want to keep some spare parts for services only ,though some of them also used in production .
then how can I implement this in SAP system,how the stock of spare parts not influence the forecast of the production( means these parts only can be used in services)
how to separate these parts in Warehouse in system and physically.
Thanks,
Helai

Helai,
If it were MY company, I would
1. Put the spares into a diff storage locn
2. Enter Safety stock for the quantity I want kept in 'spares' inventory
3. Use an availability check in which Safety stock is not relevant for ATP for these parts.
However, this does not meet all of YOUR stated business requirements. For this, you have to use MRP areas, and have the 'spares' storage location assigned to a different MRP area. You can then plan them completely separately from your production parts.
[MRP Area|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/c4/106956ae8a11d1a6720000e83235d4/frameset.htm]
Regards,
DB49

What is the name and location of the PSE 11 organizer database?

Recently I asked about how the PSE 11 Organizer stores photos. The answer I received was that the organizer stores info of the photo in a database. What is the name of this database and where is it stored?

Hi,
If you are on a Windows system, load your organizer, go to the Help menu and select System Info - that should give you the path to you catalog folder.
In that catalog folder, there are various files. The main database file is catalog.pse11db
All the other files in that folder have their purpose. Be careful what you do with the files.
Hope that helps
Brian

How can i put one part in front and one part in the back?

Alright i made this phone and a person and i want to put the bottom in front of his chin and the top behind the ear. How should i do this? Couldnt find anything in my classroom in a book, book.
thanks

The part in front and the part in back have to be two separate objects. Put a rectangle to completely cover the bottom part of the phone and let it mask the whole phone. Copy the clipping group (or duplicate its layer in the layers panel); on the copy, direct-select the end of the mask rectangle that doesn't bisect the phone and drag it the other way, so the rectangle now covers (and crops) the top half of the phone. If you do this on layers you need only make sure the phone-bottom is on the top layer, phone-top is on the bottom layer, and the person layer is between them.

Hi everyone, I have just purchased a new iMac 27. Is this device able to support a multiple monitor set-up (additional two screens)? If so what do I need and are there any draw backs?

Hi everyone,
I have just purchased a new iMac 27. Is this device able to support multiple monitor set-up (an additional two screens)? I am not a gamer, so require the set-up for 'office suite' type work and video viewing. if the set-up is possible, what would I need, is it pretty straight forward and are there any draw backs?
Thank you.

I just purchased the same imac. I connected the other displays using a thunderbolt to dvi adapter and it works fine.

What is Session Name and Keywords etc?

Hi,
When I tried to invoke an ODI scenario from an ODI package, I found some parameters like Session Name,Keywords and Synchronous / Asynchronous.
Could you please elaborate these?
Thanks
Papai

Hi DecaXD,
Thanks for the reply but I'm unable to get my answers.Please mention which section I should read to get the answers:-
Section 13.1, "Introduction to Scenarios"
Section 13.2, "Generating a Scenario"
Section 13.3, "Regenerating a Scenario"
Section 13.4, "Generating a Group of Scenarios"
Section 13.5, "Exporting Scenarios"
Section 13.6, "Importing Scenarios in Production"
Section 13.7, "Encrypting and Decrypting a Scenario"
Thanks
Papai

What's the Name and PWD in JCO Creation ?

Hello All,
 I want to create a JCo Connection.
These are the steps which I've followed :-
1. Logged on to the Portal with username and PWD.
2. Went to the WebDynpro Tab.
3. Clicked on Create JCo Connection
4. Entered the details :-
 NAME : Test_Meta_Data
 Client : 800
Note: I gave the client number of the SAP backend system . Is it right ?
5. J2EE Cluster : I have only one server in the DropDown and it's already selected.
So I choosed the next step.
6. Connection Type : DICTIONARY META DATA
7. Application Server Connection :-
 Message Server : Only one server I have in the DropDown and so I selected that.
8. Security :
 Use Method : USER / PASSWORD
 Name : sapuser
 PWD : server
 Confirm PWD : server
 SNC : OFF
9. Finish.
When I press Finish I'm getting a message :-
" failed to create a new JCo Connection Test_Meta_Data
Error while obtaining JCo Connection. "
Can any one help me in resolving this ?
Regards,
Deepu:k

Hi Deepu,
Firstly,
Yes, The details u enter while creating JCO connection are for the SAP system,
So Client, UserName, Password are for SAP system(Backend) you are creating JCO for.
Secondly, About the error u r getting,
Error says " failed to create a new JCo Connection Test_Meta_Data"
that means the SLD user has not sufficient authorization to create JCO.
In Visual Administrator, in SLD Data Supplier
You would have given SLD connection settings, there you have to give the user which has sufficient authorization(Admin authorizations) to create JCO connection..
Check the current user given in SLD Data Supplier.
Hopefully your problem will be solved.
Regards
Deepak

What is table name and field name for balance value in sales order in sap

hi i want to make FS for sales order status report .and i want balance value in report please tell me about table field name of balance value.

You can get the Sales Order status in Table VBUK & VBUP at Item Level.
To achieve the Open Value , first consider the Open Quantity.Refer VBAP - KWMENG (Order Quantity) , then from LIPS - LFIMG (Delivery Quantity) , you will get the Open Quantity & then accordingly you will get the open Value.
Best Regards,
Ankur

What is partner name and product part code in 'Back to college' form.

Similar Messages

Maybe you are looking for