What is point not allowing Bootloader unlocking?

Verizon does this stupidly. Not allowing boot-loader unlocking. The result is, people who really wants to unlock bootloader will do it anyway. And this leads to people developing methods for the same and selling it for pretty good amount of money.
There are many xDA developers they are making exploits for unlocking and are selling in the open market.
So stupid verizon.
Other carries phone, you can either unlock the bootloader easily or officially.
This sux.

Hi, You can´t create iTunes apps for free.
You share your folio Free for participants to view in the Adobe Content Viewer. (You can either gather user's emails and share with them directly, or create a few dummy GMail accounts to share with. like [email protected] FolioReviewer2 etc. Then you can provide attendees with the email and password to sign-in to the Adobe Content viewer and download your folio.
Single Editions, by Creative Cloud, is the better option to produce branded app and distribute via Apple app store as free. To distribute out App store
you need to add particular user's devices to your iTunes provision portal. In essence coding your app to run on specific devices. (Not recommended as Apple does not let you remove these from the portal very easily and you are capped to 100 devices in your account).
Important - Single Edition is just Apple, don´t work with Android tablets
__Felipe

Similar Messages

  • How Does Apple Determine What Posts Are Not Allowed to Remain?

    Apple has deleted 2 posts that, while not favorable to Leopard, do not seem to violate any of the rules. I noticed that not all posts are favorable (naturally) but remain posted. Does Apple just search for the poster's user name and remove on that basis? I'll try posting the same message under another user name and see if it get's deleted or not. I am assuming that this message will be deemed to violate Apple's policy and Apple will remove this post very quickly.

    C O'Kane wrote:
    So if one just says: I installed Leopard and lost all data and all third party applications and the Genius Bar could not fix and the data recovery place could not fix either in response to a posted question: "how was your experience with Leopard?" ..... is that a violation of the policy? It does not seem like it should be but that's the fact scenarioc
    Yes. It has nothing to do with asking a specific technical question and asking for an answer.
    This is not the Daily Agony Column that Holmes likes to read. It's not what you "seem" to want for a message board post.
    The title here is Installation and Setup. I would ask a deeper question, however, which is why you would want to make such a post? To scare others? To make yourself "feel" better? What would be the point? You don't walk into a Post Office and start ranting about a letter you got from an Aunt who just cut you off in her will. I mean, you might, but why?
    The fact is that there are many posts here on these boards that are unfavorable towards Apple and Leopard and even Apple staff. But they contain enough "meat" that they are not deleted.
    Of the posts that I have seen vanish, most had nothing in them of any value. It's also interesting that many rants are from people who purportedly speak English but cannot spell simple words and know nothing about punctuation. In my holistic view of the world, I am not surprised that their computers crashed upon upgrading to Leopard. I keep repeating that it is all attention to details.

  • Wifi access point not allow to stream a video between two machnies in LAN

    Does some one ever encountered problem like this?
    I have a wifi accesspoint runs on my computer . And my computer is in a local area network(10.16.71.26). And I am streaming a video over rtp using JMF from another computer (10.16.71.27). This works fine when the wifi access point in my local machine is disabled. When it is enabled the video streaming not works.
    I have tried with many forums but still didn't manage to find an answer. So please be kind enough to put some light on this problem or at least direct me to a place where I can find the answer. Hope at least some of u have faced a problem like this.
    Thank You
    these are my network configs, do not know whether this helps to make a suggestion
    Machine IP
    IP : 10.16.71.26
    subnet mask : 255.0.0.0
    Default Gateway : 192.168.16.1
    wifi connection
    IP : 192.168.0.1
    subnet mask : 255.255.255.0
    Default Gateway : not set
    Allowed wifi connection to access internet through LAN connection. I am streaming the video from  ip 10.16.71.27Edited by: deshan on Jul 29, 2009 12:54 AM

    You'd probably get better help with this issue on the networking forum...
    Can you ping the other computer via it's 10.x IP when the wifi AP is on?

  • HT3228 When I try to send an email from my Iphone it will not send and tells me the recepient will not allow relaying.  The email will sit in my outbox and then at some point will send.  It sometimes takes days.  What is wrong with my settings?

    When I try to send an email either new, or reply on my phone I receive a notification that recepient will not allow relaying.  The email will then sit in my outbox.  At some point it will send but it is hardly dependable.  What is wrong with my settings?

    The collum to the right listed similar problems.  The solution appears to be that under smtp outgoing settings the user name and password are listed as optional.  I have not plugged in the information and it seems to be working.  However from my office it always allowed the relaying.  The true test will be when I try to respond later from the road.
    Thank you for your help.

  • I just downloaded an update and my sophos anti-virus is going beserk.  It will not allow me to remove the threat when I unlock the quarantine manager and I have no idea of what to do

    I just downloaded an update and my sophos anti-virus is going beserk.  It will not allow me to remove the threat manually when I unlock the quarantine manager and I have no idea of what to do.

    The malware it's finding is probably Windows malware attached to e-mail messages. What are the names of some of those things? Assuming they're not Mac malware, allowing Sophos (or any other anti-virus software) to remove them could cause problems. For example, if they're attached to e-mail, removing them improperly by simply deleting the message file will leave the malware on the e-mail server, and it may very well end up getting re-downloaded when your mail client syncs with the server. It may also corrupt the mailbox.
    If you actually ever see a malware name starting with MacOS or OSX (I forget which one Sophos uses), then you will need to worry, and should not assume that the malware can be completely removed by anti-virus software of any kind.

  • When I am trying to unlock my passcode it will not allow me to do so. Everytime I hit a key the voice within the phone tells me what button I am hitting. I can't get to the home page. Help!!!

    I cannot get into my phone. It is locked up and will not allow me to use my passcode because the four boxes are enclosed in a white rectangular box. Also, the voice tells me what buttons I am pressing. What is this???

    The device must be restored from the computer it was last synced with.
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS: Understanding passcodes
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

  • My sons ipod says disavled for 22,807,916 min and will not allow me to restore what do i do? it says on the computer that we have to enter password but it will not even show the slide to unlock part. and he does no know the password.

    my sons ipod says disabled for 22,807,916 min and will not allow me to restore it. on the computer is says that i have to enter his password but the slid to unlock is not even of the screen, HELP!!!!

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I had Acrobat XI Pro Trial installed on W8.1, and I had to uninstall it because issues with MS Office 2010. Now I try to reinstall Acrobat and It does not allow me to use the trial version anymore even it was not over. What to do??

    Well, I had installed in my new computer a trial version from Acrobat XI Pro, but I had issues with Microsoft Word 2010, since it did not allow me to save changes on my file. I uninstalled it from my computer before the trial period was over, and then, after I solved the issue with Office, I wanted to get it back for a time, but the installer does not allow me to choose Trial Version. I can reach that screen where you choose between key and trial, but once I press trial and click on next, it does absolutely nothing at all.
    I have tried to manually delete folders, and I even used CC Clean to make a registry set up, but nothing out of that is working for me at all, and it keeps happening. I have no really idea what to do, and I kinda need to use Acrobat immediately for a file.

    The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.

  • When I turn on my PC, I get the message "Apple Sync Notifier.exe-entry point not found.  Then I cannot update my apps.  what to do?

    When I turn on my PC computer I get a small window pop-up that says "Apple Sync Notifier.exe-Entry Point Not found"  This message will not allow me to update my I-phone apps.  What can I do to remedy the problem??

    Try removing iTunes & all of its components, as described here, then reinstalling:
    http://support.apple.com/kb/HT1925

  • Firefox 6 will not allow you to paste a cookie into the addressbar like all previous versions have. I use software to replace web chat and must do this and have been able to do it in all past versions. What's the deal?

    Firefox 6 will not allow you to paste a cookie into the addressbar like all previous versions have. I use software to replace web chat and must do this and have been able to do it in all past versions. What's the deal?

    Thank you for your response.
    After searching around for any pointers to my problem, the above fixes I listed were the things that came closest to maybe addressing the issue, that I was able to locate. But since none worked, and as you pointed out, it is now clear they will only help towards viewing sent images rather than helping with inserting any images in the body of the email, which is the problem I suddenly started facing today.
    Coming to your suggestion, on opening the Write window, the Insert choice on the menu bar is indeed available. And I had already tried using that, by clicking on the '''Insert ----> Image''' option listed. That opens
    up the "Image Properties" box but using that has not resolved the matter either. It results in an image box getting inserted within the email but without the actual image itself.
    Plus, normally I am able to use the '''Paste''' function in the Edit menu or through right-click, but today the (Cut/Copy/Paste) functions have gone inactive, thereby disallowing me to use that to place an image within the email.

  • Mimo access points with Static WEP security do not allow connection speeds above 54mbps

    I am getting this message:
    Access Connections - Mimo access points with Static WEP security do not allow connection speeds above 54mbps
    If I switch from WEP to WAP i do not get the message but I still only get 54mbps speed.  I have a Linksys Wireless-N Broadband Router.  Is there a setting that I am missing???

    Yes you need to use WPA-AES or WPA2-AES, or no encryption, to go faster than 54Mbps. This is part of the 802.11n spec.
    That's not so bad, because if you have the right 802.11n card and use the right settings you can go up to 300Mbps!
    What bites is that the 802.11n card which comes with X-Series ThinkPads is the Intel 4965AGN. It does not support the broader 802.11n 40MHz channel width option, limiting the top speed to 130Mbps .
    The new ThinkPads based on the Montevina/Centrino 2 platform will most likely use the Intel WiFi Link 5100/5300 802.11n/WiMax cards, which I hope will fix this, coz I'm going to buy one!
    I don't work for Lenovo. I'm a crazy volunteer!

  • HT1539 What happens when you attempt to download a digital copy, but it doesn't upload in iTunes, and you're not allowed to use the code again?

    What happens when you attempt to download a digital copy, but it doesn't upload in iTunes, and you're not allowed to use the code again?

    Thanks for your reply, but you might have misunderstood it a bit. I'm NOT trying to buy a movie. ****, I'm not even in the actual Apple Store, when this happens I'm in the library not the Store part of iTunes.
    To clarify - I have purchased a physical copy of a movie which came with another physical copy which contains the digital copy. The digital copy is on the DVD, all I need is just to transfer this file to my iPod Touch, for example, I'm not trying to download it from the store or repurchase it and it's not any gift code that I've received, the digital copy is on the disc. This is the first time ever that I've purchased something on a disc and I'm not allowed to access it because the disc hasn't been purchased within my country.
    So again - I'm not attempting any purchase or download any purchased digital copy - it's on a DVD I own physically so... why is even the region of my Store relevant, the code I enter is (as I assume) just supposed to check if it's a legal genuine copy (which it is, as I've said - there are 6 discs in the pack: 3 movies on 3 Blu-rays and 3 DVD containing these digital copies of them). If I own it, I think that's proof enough that I have the right to use it. I just don't get it. I fully agree with you and understand your point if there was any purchase going on here, but it's not, it's just - I put a disc into my computer and I can't access it

  • TS1398 In "Set Up" I try to select our secured WIFi router from the list of available networks.  However, it will not allow me to select it. This then prevents me from going to the next step. What do I do?

    In "Set Up" I have tried to select our secured WiFi router from the available list shown.  It is listed.  However, when I try to select it, it will not check off or remain blue when I lift my touch.  This then will not allow me to go on to the next step.  What do I do to connect to a secure WiFi router? I do know the WEP Key number but there is no place to type then in.
    Alice from Hart

    The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.

  • Trying to login to software program known as hamspher (vip simulated ham radio,  it downloaded the program but it will not allow me to login with call sign and pin.  it has to be opened with what they call a jar file.  how do i do this?

    trying to login to software program known as hamspher (vip simulated ham radio,  it downloaded the program but it will not allow me to login with call sign and pin.  it has to be opened with what they call a jar file.  how do i do this?

    This is compatible with Mac? Especially Snow Leopard (if that is what you'e running)?
    Have you considered posting your question in their forums?
    Here is some information re. the jar file:
    http://ostermiller.org/opening_jar_files.html

  • My 6  is not allowing me access to icloud nor to any of my email addresses.  I've tried to reset it but it is asking me for my 'restrictions' passcode and I never set one up. What should I do?

    My 6+ iphone is not allowing me to access icloud nor any of my email accounts.  I've tried to reset it but it asks for my 'restrictions' passcode which I
    did not set up.  I can't reset it via itunes either because it says I have to turn 'find my iphone' off but it is off.  What should I do please?

    Hi nadzpad,
    I'm sorry to hear you are having issues with your iPhone 6 Plus. I also apologize, I'm a bit unclear on exactly what you are seeing or describing. If you are being asked for a Restrictions password, you may find the following article helpful:
    About Restrictions (parental controls) on iPhone, iPad, and iPod touch - Apple Support
    If you are getting a message that you must turn off Find My iPhone before restoring from iTunes, then these articles may be more useful:
    iCloud: Remove your device from Find My iPhone
    Find My iPhone Activation Lock - Apple Support
    Regards,
    - Brenden

Maybe you are looking for

  • Photoshop won't open file from finder or iPhoto

    I just installed Tiger and did a software up date so I'm totally up-to-date. My problem is that when I double click on a jpg in the finder or iPhoto Photoshop launches (if it's not already open) but it won't load the file. I've gone into the Get Info

  • Error Updating Photoshop from Creative Cloud App Manager

    ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Required/Plug-Ins/Extensions/FastCore.plugin/Contents/CodeResources"(Seq 2)

  • Order out of wack for sub pages

    I am using the following query the the order of the sub pages is out of wack if they were created at a different time what am I doing wrong.... since I want to organize all the pages all along with the subpages below them: select DISPLAY_NAME, ID, PA

  • User define function for SQL Server

    Hi all, it's possible to write an UDF for SQL Server in Java? I know that it is possible with DB2 and Oracle. My main goal is to write an UDF that works well with all of these DB. Thank's

  • Removing XP start files

    Hi, I have two internal hard drives (not in the same time). On one I installed XP on the other not. Unfortunately when I switched two HD's I forgot to remove XP start CD so he started to copy all basic files on the HD I do not have XP installed. Now