What is postgres_real and who are the users _teamsse _devicem

I have an iMac 27" (late 2013) running OSX Mavericks
Looking at the Activity Monitor I note the process postgres_real is sending a lot of bytes over the network. There are multiple instances of this process. One instance is owned by _teamsse, another is _devicem. Another instance of postgres_real is owned by _calendra.
I know that postgres_real is a database program, but why is in running on my iMac and sending bytes over the network?
Who are the users _teamsse, _devicem and _calendra and what systems are they associated with?
Is there a chance my activity is being reported to Apple or some other enity?
Is there any documentation you would recomend so I can figure these things out myself.
Thanks.

Postgre is used on the Server version. Since you are running Server, you might want to ask on the OS X Server forums.

Similar Messages

To what limits (lower and upper) are the PXI-6052E boards calibrated for their various gain settings?

I am trying to get some boards calibrated by our metrology lab, but I can't find the relevant information.

I've viewed all, and downloaded most, info at the link that you've mentioned. Unfortunately, the data I'm looking for isn't there. In the E Series Calibration Procedure document, there is an extensive listing of tables that contain calibration data points for a variety of E series boards. However, the 6052E board isn't listed. Elsewhere on the ni website, there is a note to use the 6034E/6035E tables for the 6052E boards. These tables do not contain all the gain settings for the 6052E. I would assume that the 6052E boards were factory calibrated at all possible gain combinations.

What are the user exits available related to Credit Management?

What are the user exits available related to Credit Management?
<b>I have blocked users from releasing SO through Tciode VKM3 , now I want to block
the same (releasing of SO through VKM4) ,I want VKM4 to be used only for releasing delivery orders. Can anyone help me in configuring the same?.</b>
Thanx in advance,
Regrds,
Binayak

Hi,
User Exits For Credit Checks And Risk Management
Credit Check
If you want to carry out your own individual credit checks, that differ from those in the standard system, you must define them in the following user exits:
LVKMPTZZ
LVKMPFZ1: USER_CREDIT_CHECK1
LVKMPFZ2: USER_CREDIT_CHECK2
LVKMPFZ3: USER_CREDIT_CHECK3
User exit for availability check
User exit USEREXIT_AVAIL_CHECK_CREDIT exists in Include MV45AFZF.
This user exit allows you to determine whether the system should or should not carry out an availability check after a blocked document has been released or after a new credit check.
Risk Management for Receivables
RVKMPUS2
Using this user exit, you can define new forms of payment guarantee.
Regards,
Amrish Purohit

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

I have a Win7Pro SP1 PC locked down with a Group Policy as it is a public facing PC. PDF fillable forms cannot be completed when logged on as the restricted user. The forms work as a normal user. What are the user requirements/permissions needed to fill f

I have a Win7Pro SP1 PC locked down with a Group Policy as it is a public facing PC. PDF fillable forms cannot be completed when logged on as the restricted user. The forms work as a normal user. What are the user requirements/permissions needed to fill forms?

Well, try this (I was able to fix my with these steps):
Go Utilities > Disk Utility
Select your Startup Disk, e.g. Macintosh HD
Then, under the First Aid Tab, click Verify Disk Permissions.
If there are errors, then click repair Disk Permissions.
After it is done, restart the computer and see if your problem is resolved.
I hope this help.
Zeke
www.ZekeYuen.com/blog/

Any report to see what are the users assigned to an org-unit ?

Hi All,
Is there any standard report available to see what are the users assigned to a particular org-unit?
I'm looking for complete list of users assigned to a particular org-unit both directly and indirectly/
Thank you so much in advance !!
Cheers,
Gyan.

Hi,
None of them actually helped.
Trx PC00 is not available in 4.0 sytem. And from the table mentioned i don't see the org-unit value. Could you please elaborate on this.
Thanks,
Gyan.

What are the User Exit Available after saving a Billing Documents

Hi,
What are the User Exit Available after saving a Billing Documents
Regrds,
Binayak

Hi
Check the following Exits for VF01 Tcode
V61A0001                                Customer enhancement: Pricing
V60P0001                                Data provision for additional fields for display in lists
V60A0001                                Customer functions in the billing document
V05N0001                                User Exits for Printing Billing Docs. using POR Procedure
V05I0001                                User exits for billing index
SDVFX011                                Userexit for the komkcv- and kompcv-structures
SDVFX010                                User exit item table for the customer lines
SDVFX009                                Billing doc. processing KIDONO (payment reference number)
SDVFX008                                User exit: Processing of transfer structures SD-FI
SDVFX007                                User exit: Billing plan during transfer to Accounting
SDVFX006                                User exit tax line in transfer to accounting
SDVFX005                                User exit reserves in transfer to accounting
SDVFX004                                User exit G/L line in transfer to accounting
SDVFX003                                User exit cash clearing in transfer to accounting
SDVFX002                                User exit for A/R line in transfer to accounting
SDVFX001                                User exit header line in delivery to accounting
Business Add-in
SD_CIN_LV60AU02                         BADI for billing
VOR_WA_FAKTURA                          Billing before Goods Issue
Reward points if useful
Regards
Anji

What are the user defind functions

hi all,
what are the user defind functions.
Regards,
priya

Hi Priya,
Generally we will complete our mapping things with the help of Standard Functions itself those are available in Graphical Mapping.
UDF are used when the mappings are unable to complete with these standard functions then we need to write small piece of Java code and can achieve that functionality.
Steps to UDF
Activities
1. To create a new user-defined function, in the data-flow editor, choose Create New Function (This
graphic is explained in the accompanying text), which is located on the lower left-hand side of the
screen. In the menu, choose Simple Function or Advanced Function.
2. In the window that appears, specify the attributes of the new function:
Name
Technical name of the function. The name is displayed in the function chooser and on the data-flow
object.
Description
Description of how the function is used.
Cache
Function type (see above)
Argument Count
In this table, you specify the number of input values the function can process, and name them. All
functions are of type String.
3. In the window that appears, you can create Java source code:
a. You can import Java packages to your methods from the Imports input field, by specifying them
separated by a comma or semi-colon:
You do not need to import the packages java.lang., java.util., java.io., and java.lang.reflect. since
all message mappings require these packages and therefore import them. You should be able to
access standard JDK and J2EE packages of the SAP Web Application Server by simply specifying the
package under Import. In other words, you do not have to import it as an archive into the Integration
Repository. You can also access classes of the SAP XML Toolkit, the SAP Java Connector, and the
SAP Logging Service (see also: Runtime Environment (Java-Mappings)).
In addition to the standard packages, you can also specify Java packages that you have imported as
archives and that are located in the same, or in an underlying software component version as the
message mapping.
b. Create your Java source text in the editor window or copy source text from another editor.
4. Confirm with Save and Close.
5. User-defined functions are limited to the message mapping in which you created the function. To
save the new function, save the message mapping.
6. To test the function, use the test environment.
The new function is now visible in the User-Defined function category. When you select this category,
a corresponding button is displayed in the function chooser pushbutton bar. To edit, delete, or add the
function to the data-flow editor, choose the arrow next to the button and select from the list box
displayed.
REgards
Seshagiri

How to get the list of employees whose Sal on hold and who are active

HI Experts,
We are trying to extract a report,where the list of employees whose salary was hold and who are active in a particular month.
Please advice.
Regards,
V Sai.

Hi,
I can think of two different solutions. You can choose the one as per the requirement.
1. Creating a report of locked employees as on date.
Active employee that are locked in Infotype 3.
As infotype 3 doesnt have different Begin data and end dates, we cannot have historic data/report.
2. Creating a report for payroll not run.
Getting a list of active employees
Check the RT of the employees for previous payroll runs.
You can use the selection criterila for dates/months.
Hope this helps.
Param

Trying to restore phone settings from icloud but unable to because its telling me that the IOS is not compatible and neither are the previous 3 versions shown. What shall I do? The chap in the shop said it was easy... I dont have the laptop to hand...

Can anyone help please? Backed up Iphone 4s to icloud and received the replacement one. So I am trying to restore from icloud. Unfortunately, the phone tells me that the IOS system (showing 6.1.2 required) is incompatible and so are the previous 3 backups... I dont have the laptop to hand in order to backup to itunes either. I'm guessing I cant set up as a new phone, get the latest IOS system update and then restore the backup from icloud... or can I?

On your new phone: Settings>General>Software Update. Once done: Settings>General>Reset>Erase All Content & Settings. You'll now be able to use your backup.

How to find last runtime of query and who ran the query

Hi,
I am doing the analysis for all the queries , their last run time and who ran the query
Since there are almost 6000 queries , is there any way to find out last run time and who ran the query
in one step or through any transaction else It would huge effort taking task to check the data in BW statistics
table for each query
Please suggest
Regards,
Vivek

Hi,
Statistics should be switched ON for all the queries first. You can check this in RSDDSTAT.
Statistics data is stored in BW for a specific period only. This setting can be maintained in table RSADMIN (Field : TCT_KEEP_OLAP_DM_DATA_N_DAYS). If the value for the field is 30, then 30 days old statistics will be available at any point.
Not all the queries will be ran daily. Some are ran daily, monthly and yearly depending upon User requirement.
1. You can check in RSDDSTAT_OLAP for the details you needed.
2. You can install the BI Technical Content and run the respective query for the details you needed.
Hope this helps.
Regards,
Sunil

How to findout Which are the User Exist had been activated for T.Code

Hi Everybody,
-->I want to know, what are the user exits have been activated or used for a particular t.code.
--> I will give a small example it will be give clear idea on my question.
-->For my client, they used lot of user exist and screen exist in the sales order screen,how to find out them. Is their any easy way to find out which are user exist had been acitviated for a particular template.
Regards,
Madhan

If you mean how to see a user list with the T-Code they are using.
Then you can just use T-Code SM04.
It will give all the information about those user.
Or If you mean User Exists.
then please use this link
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
Thanks,
Sugauli
Edited by: Sugauli on Dec 11, 2008 9:20 PM

What other videos and books are there? that you suggest. for step by step . Jeannette

What other videos and books are there? that you suggest. for step by step .
Jeannette

The various Lynda.com video tutorials are very good, but you have to pay for a description. The Photoshop User TV podcasts are excellent; there are hundreds of them, and they are free. They are also what the iPad was invented for.
The 'You suck at Photoshop' videos on YouTube are both very funny and very instructive.
The Scott Kelby books are very good for folk starting out. The Martin Evening, and the Martin Evening/Jeff Schewe books are as good as they get from a photography point of view. The Steve Caplin books are the best Photoshop books once you get into it, but Scott Kelby and Matt Kloskowski do some great medium to advanced books. Matt's Compositing Secrets is excellent, and was Amazon's best Photoshop book for a while.

Way to know when and who ran the MRP for a plant

Hi,
Is there a way to find when and who ran the MRP for a plant in Prodn Environment? I know if you look at MD05, we know the MRP list based on date/time of last MRP run. But it does not tell me who ran the MRP.
Currently there are some purchase reqs getting created by the system and we want to find who ran the MRP and what was their selection screen data. Please can anyone help to provide some info on this.
Thanks in advance.
Regards,
Swapnil

Swapnil,
Check out the links given below,
http://sap.ittoolbox.com/groups/technical-functional/sap-log-pp/mrp-runs-history-2660384
https://forums.sdn.sap.com/click.jspa?searchID=25316893&messageID=7257545
Hope this helps.
SmanS

How to know last run time and who ran the query

Hi
I am doing the analysis for all the queries , their last run time and who ran the query
Since there are almost 6000 queries , is there any way to find out last run time and who ran the query
in one step or through any transaction else It would huge effort taking task to check the data in BW statistics
table for each query
Regards,
Vivek

Hi,
Statistics should be switched ON for all the queries first. You can check this in RSDDSTAT.
Statistics data is stored in BW for a specific period only. This setting can be maintained in table RSADMIN (Field : TCT_KEEP_OLAP_DM_DATA_N_DAYS). If the value for the field is 30, then 30 days old statistics will be available at any point.
Not all the queries will be ran daily. Some are ran daily, monthly and yearly depending upon User requirement.
1. You can check in RSDDSTAT_OLAP for the details you needed.
2. You can install the BI Technical Content and run the respective query for the details you needed.
Hope this helps.
Regards,
Sunil

What is postgres_real and who are the users _teamsse _devicem

Similar Messages

Maybe you are looking for