What is re-initiliation of data sources from R/3

Hi all,
     pls send as soon as possible.
    Thank you.

Hi,
please search the forum before you post a thread,
If you are using LO data source and you have loaded INIT by filling setup tables and now you are runnng deltas daily after certain perod you have decided to make reconcile the reords between R/3 and BW and you have found that some records are missing on BW side, for bringing that missing records into BW side you have to fill the setup tables selectively and load the data again,
Some times delta get corrupted in source system side at that time you have re init your delta ,
if any patches has been added on source system side and you have to make re init of delta,
Thanks,
Pavan.

Similar Messages

  • Error in generating data source from planning area

    Hi experts! I have an error while making data source from planning area:
    after the screen when i fill in the data source name (Window name: Generate export data source) i have the SYNTAX_ERROR Message:
    Syntax error in program /sapapo/cl_im_extract_ex======cp
    the main reason: the type /BI0/9A0IVWKNDGD is unknown
    what you can suggest to solve this problem?
    Thanks.

    Dear Andrey Kudriavzev,
    The reason is the program is trying to use the datatype '/BI0/9A0IVWKNDGD' which does not exist in the system.
    Go SE11 to cross check if it exists. Check dataelement radiobutton -> enter /BI0/9A0IVWKNDGD -> Choose display option. You would need to create this datatype in the system. I feel there must some OSS Note related to this.
    Search for an OSS Note. Raise one if you cannot find the relevant notes.
    Regards,
    Naveen.

  • What are the Non SAP data sources supported for Analysis workbooks?

    AO 1.4 SP6
    BO 4.1 SP2
    What are the Non SAP data sources supported for Analysis workbooks?
    Thanks.

    HANA is a data source (which could contain non-SAP data)
    For other Excel front-ends that may connect to "non-SAP" data look at Live Office or Power BI by Microsoft - see Excel and Power BI connectivity to SAP BusinessObjects Universes | Power BI

  • How To change UME Data source from Abap to Java.

    Hi Experts,
    Can any one give me Detailed Steps of how to Migrate from UME Data Source from Abap to Java, as the Ume Data Source is initally configured for Abap.
    Regards,
    Siva

    Siva,
    Please search before you post a question.
    This has been discussed many a times in here. Please refer to this [thread|To change ABAP UME database to Portal database;.
    Good Luck!
    Sandeep Tudumu

  • Replication of Data Source from APO to External BI

    Hi Experts,
    I want to create a data source on DP/SNP planning area & replicate it directly to External BI instead of APO BW. Is it possible to replicate data source from APO to directly External BI? If yes then How?
    Regards
    Sujay

    Hi Sujay,
          If you would like to replciate a particular Data source then Go to BW -> TCode RSDS ( Data source Repository)
    Data Source = ( specify which you would like to replciate )
    Source system = Specify source system name.
    Go to Menu option Data Source -> Replicate Data source or you can use CTRL + SHIFT + F2
    These steps will replicate only the data source which you would like to replicate.
    Thanks,
    Siva.

  • What is "SQL Anywhere" in Data Source definition?

    Hi All,
    What is "SQL Anywhere" in Data Source definition? and what is the use ?

    Sybase SQL Anywhere (http://www.sybase.com/products/databasemanagement/sqlanywhere)

  • Transporting migrated data sources from BID to BIQ

    All,
           I have a 3.x data source which I have migrated to 7.x. Now I want to transport this from BI-D to BI-Q. when I replicate the data source in BI-Q this is likely to be 3.x data source. Will it be overwritten when I transport the data source from BI-D to BI-Q. Is there any thing that I will have to do before moving the transport. Please advise

    If you transport the DataSource on R3/ECC from development to QA that's connected to your BW QA, and then transport the DataSource from your BW development to QA environment, there is no need to replicate the DataSource. It may, however, come into your BW QA environment in a deactivated state. If that happens, just activate it in the BW QA environment using the SAP delivered ABAP program RSDS_DATASOURCE_ACTIVATE_ALL.

  • How to use Sql data source from Essbase 9.3.1

    Hi All,
    How to use Sql data source from Essbase 9.3.1 for ASO cube.Are there any rules and limitations for that.
    Do we need to create any data source connection for this purpose. If there please let me know the dteps to create that connection.
    Regards

    Yes you need to create one DSN connection and you have to use DSN name and login details at the time of building/loading of the outline.
    Create DSN
    Goto Administrative tools -> DataSources (ODBC) and add the DSN name and specify the Server name of SQL and login details and database.
    goto data prep editor and click on File Menu and Click on Open SQL option Next window opens.
    There you have to enter the details of the DSN connection and SQL query to build/load.
    Thanks,
    Prathap

  • Access odbc data sources from PL/SQL

    Dear All,
    I would like to know is there any way where i could access odbc data sources from pl/sql (i.e i would like to insert, update records into MSAccess table from pl/sql procedures, triggers). Would appreciate any help regarding this.

    The only way I know of how is to write and external function library and use that to access ODBC datasource ...if someone else knows something else I would be interesting in hearing about that also.

  • How to create a report using XML data source from Crystal Report Designer

    Hi,
    Iu2019m having Crystal Report Designer XI R2 SP4. Iu2019m trying to create a report using XML data source stored on disk. This is a customer order report and the xml is structured in such a way that it has an order details header part (master) and then it has several order lines (detail). One order line can have several order line characteristics (detail-detail). So what I need to know is now I can design this layout from the designer. If this was done using views I can do it with sub-reports but using xml data this seems to be different. Can you help me to design this layout? I have included the xml and xsd as well.
    Thank you in advance.
    Regards,
    Chanaka
    XML
    <?xml version="1.0" encoding="UTF-8"?>
    <CUSTOMER_ORDER_CONF_REP_REQUEST xmlns:xsi="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep">
        <CUSTOMER_ORDER_CONF_REP>
            <ORDER_NO>D555809</ORDER_NO>
            <PRINTED_DATE>2009-03-26T08:52:54</PRINTED_DATE>
            <AUTHORIZE_NAME>Chanaka</AUTHORIZE_NAME>
            <CUSTOMER_NO>CU-1473-INV</CUSTOMER_NO>
            <CUST_NAME>Mr.Johan Matts</CUST_NAME>
            <SHIP_ADDR_1>93,Main Street</SHIP_ADDR_1>
            <SHIP_ADDR_2>Negambo Road</SHIP_ADDR_2>
            <SHIP_ADDR_3>Watthala</SHIP_ADDR_3>
            <SHIP_ADDR_4>SRI LANKA</SHIP_ADDR_4>
            <BILL_ADDR_1>93,Main Street</BILL_ADDR_1>
            <BILL_ADDR_2>Negambo Road</BILL_ADDR_2>
            <BILL_ADDR_3>Watthala</BILL_ADDR_3>
            <BILL_ADDR_4>SRI LANKA</BILL_ADDR_4>
            <CUSTOMER_PO_NO>112984638</CUSTOMER_PO_NO>
            <CUSTOMER_FAX>112984639</CUSTOMER_FAX>
            <CUSTOMER_EMAIL>abcbababab</CUSTOMER_EMAIL>
            <ORDER_LINES>
                <ORDER_LINE>
                    <LINE_NO>1</LINE_NO>
                    <CUSTOMER_PART_NO>NW-IP11</CUSTOMER_PART_NO>
                    <CUSTOMER_PART_DESC>iPod</CUSTOMER_PART_DESC>
                    <SALE_UNIT_PRICE>1200</SALE_UNIT_PRICE>
                    <PRICE_TOTAL>1200</PRICE_TOTAL>
                    <DISCOUNT>0</DISCOUNT>
                    <PRICE_QTY>1</PRICE_QTY>
                    <ORDER_LINE_CHARACTERSTICS>
                        <CHARACTERISTIC_ITEM>
                            <CHARACTERISTIC_ID xsi:nil="1"/>
                            <CHARACTERISTIC_VALUE xsi:nil="1"/>
                        </CHARACTERISTIC_ITEM>
                    </ORDER_LINE_CHARACTERSTICS>
                </ORDER_LINE>
                <ORDER_LINE>
                    <LINE_NO>2</LINE_NO>
                    <CUSTOMER_PART_NO>NW-IP24</CUSTOMER_PART_NO>
                    <CUSTOMER_PART_DESC>XGA Projector</CUSTOMER_PART_DESC>
                    <SALE_UNIT_PRICE>500</SALE_UNIT_PRICE>
                    <PRICE_TOTAL>1500</PRICE_TOTAL>
                    <DISCOUNT>0</DISCOUNT>
                    <PRICE_QTY>3</PRICE_QTY>
                    <ORDER_LINE_CHARACTERSTICS>
                        <CHARACTERISTIC_ITEM>
                            <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                            <CHARACTERISTIC_VALUE>Free Instalation</CHARACTERISTIC_VALUE>
                        </CHARACTERISTIC_ITEM>
                    </ORDER_LINE_CHARACTERSTICS>
                </ORDER_LINE>
                <ORDER_LINE>
                    <LINE_NO>3</LINE_NO>
                    <CUSTOMER_PART_NO>NW-IP02</CUSTOMER_PART_NO>
                    <CUSTOMER_PART_DESC>Sony DVD Player</CUSTOMER_PART_DESC>
                    <SALE_UNIT_PRICE>1000</SALE_UNIT_PRICE>
                    <PRICE_TOTAL>1000</PRICE_TOTAL>
                    <DISCOUNT>0</DISCOUNT>
                    <PRICE_QTY>1</PRICE_QTY>
                    <ORDER_LINE_CHARACTERSTICS>
                        <CHARACTERISTIC_ITEM>
                            <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                            <CHARACTERISTIC_VALUE>Free 5 DVDs</CHARACTERISTIC_VALUE>
                        </CHARACTERISTIC_ITEM>
                    </ORDER_LINE_CHARACTERSTICS>
                </ORDER_LINE>
                <ORDER_LINE>
                    <LINE_NO>4</LINE_NO>
                    <CUSTOMER_PART_NO>NW-IP99</CUSTOMER_PART_NO>
                    <CUSTOMER_PART_DESC>Flatscreen TV</CUSTOMER_PART_DESC>
                    <SALE_UNIT_PRICE>1500</SALE_UNIT_PRICE>
                    <PRICE_TOTAL>1350</PRICE_TOTAL>
                    <DISCOUNT>10</DISCOUNT>
                    <PRICE_QTY>1</PRICE_QTY>
                    <ORDER_LINE_CHARACTERSTICS>
                        <CHARACTERISTIC_ITEM>
                            <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                            <CHARACTERISTIC_VALUE>Free Delivery</CHARACTERISTIC_VALUE>
                        </CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ITEM>
                            <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
                            <CHARACTERISTIC_VALUE>1 year additional warranty</CHARACTERISTIC_VALUE>
                        </CHARACTERISTIC_ITEM>
                    </ORDER_LINE_CHARACTERSTICS>
                </ORDER_LINE>
                <ORDER_LINE>
                    <LINE_NO>5</LINE_NO>
                    <CUSTOMER_PART_NO>NW-IP56</CUSTOMER_PART_NO>
                    <CUSTOMER_PART_DESC>Sony MP3 Player</CUSTOMER_PART_DESC>
                    <SALE_UNIT_PRICE>200</SALE_UNIT_PRICE>
                    <PRICE_TOTAL>400</PRICE_TOTAL>
                    <DISCOUNT>0</DISCOUNT>
                    <PRICE_QTY>2</PRICE_QTY>
                    <ORDER_LINE_CHARACTERSTICS>
                        <CHARACTERISTIC_ITEM>
                            <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                            <CHARACTERISTIC_VALUE>Free carry belt</CHARACTERISTIC_VALUE>
                        </CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ITEM>
                            <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
                            <CHARACTERISTIC_VALUE>Free promotional 4GB memory bar</CHARACTERISTIC_VALUE>
                        </CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ITEM>
                            <CHARACTERISTIC_ID>3</CHARACTERISTIC_ID>
                            <CHARACTERISTIC_VALUE>No warranty on memory bar</CHARACTERISTIC_VALUE>
                        </CHARACTERISTIC_ITEM>
                    </ORDER_LINE_CHARACTERSTICS>
                </ORDER_LINE>
            </ORDER_LINES>
        </CUSTOMER_ORDER_CONF_REP>
    </CUSTOMER_ORDER_CONF_REP_REQUEST>
    XSD
    <?xml version="1.0" encoding="UTF-8"?>
    <?report  module="ORDER" package="CUSTOMER_ORDER_CONF_REP" ?>
    <xs:schema targetNamespace="urn:ifsworld-com:customer_order_conf_rep" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep" elementFormDefault="qualified" attributeFormDefault="unqualified">
    <xs:element name="CUSTOMER_ORDER_CONF_REP_REQUEST">
    <xs:complexType>
    <xs:all minOccurs="1" maxOccurs="1">
    <xs:element name="CUSTOMER_ORDER_CONF_REP">
    <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="50">
    <xs:element name="ORDER_NO" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="PRINTED_DATE" type="xs:dateTime" nillable="true" minOccurs="0"/>
    <xs:element name="AUTHORIZE_NAME" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="CUSTOMER_NO" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="CUSTOMER_PO_NO" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="CUST_NAME" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="SHIP_ADDR_1" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="SHIP_ADDR_2" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="SHIP_ADDR_3" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="SHIP_ADDR_4" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="BILL_ADDR_1" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="BILL_ADDR_2" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="BILL_ADDR_3" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="BILL_ADDR_4" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="CUSTOMER_FAX" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="CUSTOMER_EMAIL" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="ORDER_LINES" nillable="true" minOccurs="0">
    <xs:complexType>
    <xs:sequence minOccurs="0" maxOccurs="unbounded">
    <xs:element name="ORDER_LINE">
    <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="39">
    <xs:element name="LINE_NO" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="SALE_UNIT_PRICE" type="xs:float" nillable="true" minOccurs="0"/>
    <xs:element name="PRICE_TOTAL" type="xs:float" nillable="true" minOccurs="0"/>
    <xs:element name="DISCOUNT" type="xs:float" nillable="true" minOccurs="0"/>
    <xs:element name="PRICE_QTY" type="xs:float" nillable="true" minOccurs="0"/>
    <xs:element name="CUSTOMER_PART_NO" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="4000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="CUSTOMER_PART_DESC" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="4000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="ORDER_LINE_CHARACTERSTICS" nillable="true" minOccurs="0">
    <xs:complexType>
    <xs:sequence minOccurs="0" maxOccurs="unbounded">
    <xs:element name="CHARACTERISTIC_ITEM">
    <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="6">
    <xs:element name="CHARACTERISTIC_ID" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    <xs:element name="CHARACTERISTIC_VALUE" nillable="true" minOccurs="0">
    <xs:simpleType>
    <xs:restriction base="xs:string">
    <xs:maxLength value="2000"/>
    </xs:restriction>
    </xs:simpleType>
    </xs:element>
    </xs:choice>
    </xs:complexType>
    </xs:element>
    </xs:sequence>
    </xs:complexType>
    </xs:element>
    </xs:choice>
    </xs:complexType>
    </xs:element>
    </xs:sequence>
    </xs:complexType>
    </xs:element>
    </xs:choice>
    </xs:complexType>
    </xs:element>
    </xs:all>
    </xs:complexType>
    </xs:element>
    </xs:schema>

    Hi Sourashree,
    Thank you for the response and ideas you have given me so far. I can get the fetch the data from the data source without any problem. That is I do the following,
    1.     New Report
    2.     From Create New Connection-> XML
    3.     Provide the u201CLocal XML Fileu201D and have u201CSpecify Schema Fileu201D checked -> Next
    4.     Provide the u201CLocal Schema Fileu201D  -> Finish
    Then I can see the following under XML
    + CUSTOMER_ORDER_CONF_REP_REQUEST
            CUSTOMER_ORDER_CONF_REP_REQUEST
         CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
         CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES
         CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
         CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS
         CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
    And from here if I add the following three I can get all the fields I need to the report
         CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
         CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
         CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
    Then I come to the Linking section. Here I canu2019t link anything. There is a common field called u201CInternal_IDu201D but I canu2019t link using it. So I get a message when I click Next. From here I add all the fields.
    For this point onwards only I need help. How do I group, add fields and design the layout so I can get an report output as follows.
    Date
    Order number                                   Authorized code
    Customer No
    Name
    Phone
    Fax email
    Shipping address 1                              Billing Address 1
    Shipping address 2                              Billing Address 2
    Shipping address 3                              Billing Address 3
    Shipping address 4                              Billing Address 4
    Order Line 1 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026                      LINE_NO     CUSTOMER_PART_NO          CUSTOMER_PART_DESC     SALE_UNIT_PRICE     PRICE_QTY     DISCOUNT     PRICE_TOTAL
    Characteristic details belonging to Order line 1       CHARACTERISTIC_ID 1  CHARACTERISTIC_VALUE1
                                           CHARACTERISTIC_ID 2  CHARACTERISTIC_VALUE2
                                           CHARACTERISTIC_ID 3  CHARACTERISTIC_VALUE3
    Order Line 2 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
    Characteristic details belonging to Order line 2
    Order Line 3 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
    Characteristic details belonging to Order line 3
    Order Line 4 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
    Characteristic details belonging to Order line 4
    Order Line 5 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
    Characteristic details belonging to Order line 5
    How can I achieve this kind of a layout using the give xml and xsd? Should I use grouping if so how should I do the grouping?
    I have included the full xml and xsd in the first mail I posted but I canu2019t see it now. I can include that again if you want.
    Regards,
    Chanaka

  • Changing the data source from DB2 to ORACLE in SBOP 4.0

    Hi Gurus,
    We have done SBOP 4.0 SP 2 installation successfully on Linux by choosing DB2 as default Database as suggested by SAP as there is some issue with RH LINUX 5.5 version. Now, we need to change the CMS data source back to ORACLE 11G. For that we have to execute cmsdbsetup.sh and go with the option of "copy" (Copy data from another Data Source). We need to provide the target/destination CMS database in my case ORACLE (TNS & CMS user) details. And also we need to provide the source CMS user (DB2) details. As we went with the bundled/default DB2 installation, we are not able to find the cms user name and password (no where during the installation it prompted to provide cms username and password).
    What will be the default cms username /password in DB2?
    Thanks,
    Sandeep

    Hi,
    The work around is to create/add an extra node (SIA Node) with default servers option for the existing CMS and provided my ORACLE CMS username/password along with the TNS Names using cmsdbsetup.sh. Make sure that this new node is visible in the Servers section of the CMC console (i.e. http://<webappserver>:8080/BOE/CMC-->servers) and also see that all the servers should be running. Then you can delete the old SIA which was connected to DB2 from the CMC->servers.
    Thanks,
    Sandeep

  • How to prevent Pivot Table Data Source from being changed automatically?

    I have an excel file that contains a Pivot Table that references a table within the workbook (Data Source = "MyTable").  When I save the file and copy it, the copy contains a reference to the original file.  Instead of displaying, "MyTable",
    it shows  "OldFilename!MyTable" where OldFilename is the name of the original file, not the current file.
    How do I prevent this from occurring.  It is only doing this on my current machine, if I perform these steps on a different machine, the problem does not occur and the Data Source property stays the same as it should.
    What setting(s) do I change to fix this problem?
    Thank you in advance for your help!
    Michael

    Hi Michael,
    How about the issue now, is it solved?For the 'data model' feature,please refer to:
    http://blogs.office.com/2012/08/23/introduction-to-the-data-model-and-relationships-in-excel-2013/
    let us know if you have any additional questions or concerns.
    Best regards,
    Wind

  • Logical column using data source from 2 generations of same hierarchy

    Hi experts,
    I'm using Essbase as my data source in CEIM physical layer,
    and I have a hierarchy called "Entity" which contains different level of companies,
    in Generation 2 I have only one member called "group totals" and in Generation 3 are 5 members representing 5 different industries,
    I need to use these total 6 members as slider on the top of the view(a Dial),
    and the measure I want to show is scaled in rate, which I can't simply sum up those five members in Gen3 to get Gen2 measurement.
    I tried to create a logical column using Entity-default(the alias table) as datasource, it worked but was not sorted in outline style.
    I tried to sort them using calculate items in selection steps, but calculate items seemed cannot be shown as section or slider.
    So I wonder if I can simply create a logical column that sourced from different generations(in this case, my Gen2 and Gen3) of same hierarchy,
    is it possible to do such things?
    Thanks for reply.

    You could try General Database Discussions the main db foum.
    What are you using to migrate your database? Why is it being mapped from varchar2(8) to varchar2(32). It sounds like someone/something is intervening here.
    Barry

  • How to take XML data source from URL?

    Hi,
    I creating application which need to download some data from any web page. This page is creating via XSL (as stylesheet) .This XSL
    process some XML "data source" and generate HTML page. I wanna ask if exist some way how to take this XML "data source"? If i used
    URL and take InputStream I everytime obtain full generated HTML, JavaScript page - compiled by web browser. But if i look to "page
    source" of this page in web browser i see just that XML data source which i need to take (only at start of this xml is way to xsl
    style sheet).
    But this problem i have only at my required page.If i tried to take another page with similar structure code, it was succesful.
    Here is link : LINK
    Why i dont have permision take clear xml from this page?What is so special?
    Exist some way how to take this XML without generated html code?
    Thank you.

    I apologize for my english. I try explain my problem again:
    At this url [http://eu.wowarmory.com/item-info.xml?i=33677] is web page. If you look at "page source", web page is create via XML and XSLT. I need load this data source. I used DOMParser for that:
    URL url = new URL("http://eu.wowarmory.com/item-info.xml?i=33677");
    DOMParser parser = new DOMParser();
    parser.parse(url);
    XMLDocument doc = parser.getDocument();I get exception : Exception in thread "main" oracle.xml.parser.v2.XMLParserException: Expected '?>' instead of 'EOF'
    If i used it at another page (for example [http://www.w3schools.com/XML/simplexsl.xml|http://www.w3schools.com/XML/simplexsl.xml] ), compile was successful and i can work with this XMLDocument and etc.
    I try load it by InputStreamReader too:
    URL url = new URL("http://eu.wowarmory.com/item-info.xml?i=33677");
    try {
        BufferedReader br = new BufferedReader(new InputStreamReader(url.openStream());
        String line;
        while ((line = br.readLine() != null) {
            System.out.println(line);
    } catch (IOException e) {
        e.printStackTrace
    }i get only compiled HTML code by web browser. At second page i load successfuly XML data - not compiled by browser.
    Is possible to take original xml page source from this page? And what diferent is between this pages?
    Thank you and i hope, you can translate this post without headache :-) If it will be necessary, i can more specify some details.

  • How to replicate Generic data source from R/3 to BI

    Hi,
    I have created generic datasource in r/3 using view. I replicated to BI.
    I selected  for DataSource (RSDS) instead of selecting  3.x DataSouce.
    Now what r the steps to load data into cube.
      Please help me in this regard. Please give me detail steps to proceed further.
    Thanks,
    Jaswantha

    Hi,
    About Generic Extraction:
    In Sometimes the Standard Extraction Does not Satisfy the Customers Needs that time We have to use Generic Extraction.
    generic extraction is also classified in to three types
    using
    1. View
    2.Infoset query
    3.Function module.
    Procedure:
    -->Go to Tcode : RSo2,
    -->There give the name of data source which you want to create like
    transaction data source or master data attribue or Text data source.
    -->enter
    -->again in the next screen you need to give application like SD or MM
    etc
    -->in the same screen need to select table/view or infosetquery or
    function module. these are different ways of creating data sources.
    -->Give the name for the same like if u r creating data source on table
    give the name of table.
    -->click on Generic delta which will there in application tool bar and
    fil the required columns in that screen like type of delta and all
    -->continue and save
    -->it will give all the fieds
    -->enable the check boxes based on your requirement like selection or
    hide or field only..
    -->save
    please see the below links:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Re: Generic Extractor - Delta
    Re: Generic Extractor - Delta
    Please do check the link for step by step for generic xtraction
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    check the following
    http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
    business content
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
    https://websmp203.sap-ag.de/co
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
    (navigate with expand left nodes)
    also co-pa
    http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
    LO Extraction
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Check these links:
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    Re: LO-Cockpit  V1 and V2 update
    Also Refer this link:
    http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
    FI-CO 'Data Extraction -Line Item Level-FI-CO
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
    FI-GL
    http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
    http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
    http://www.sapgenie.com/sapfunc/fi.htm
    FI-SL
    http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
    How to do basic LO extraction for SAP-R3-BW
    1. Go to transaction code RSA3 and see if any data is available related to your DataSource. If data is there in RSA3 then go to transaction code LBWG (Delete Setup data) and delete the data by entering the application name.
    2. Go to transaction SBIW --> Settings for Application Specific Datasource --> Logistics --> Managing extract structures --> Initialization --> Filling the Setup table --> Application specific setup of statistical data --> perform setup (relevant application)
    3. In OLI*** (for example OLI7BW for Statistical setup for old documents : Orders) give the name of the run and execute. Now all the available records from R/3 will be loaded to setup tables.
    4. Go to transaction RSA3 and check the data.
    5. Go to transaction LBWE and make sure the update mode for the corresponding DataSource is serialized V3 update.
    6. Go to BW system and create infopackage and under the update tab select the initialize delta process. And schedule the package. Now all the data available in the setup tables are now loaded into the data target.
    7.Now for the delta records go to LBWE in R/3 and change the update mode for the corresponding DataSource to Direct/Queue delta. By doing this record will bypass SM13 and directly go to RSA7. Go to transaction code RSA7 there you can see green light # Once the new records are added immediately you can see the record in RSA7.
    8.Go to BW system and create a new infopackage for delta loads. Double click on new infopackage. Under update tab you can see the delta update radio button.
    9.Now you can go to your data target and see the delta record.
    find your scenario and find what data sources do you need on R3 side and ensure they are active as well:
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
    find your scenario -> data sources -> go to R3 -> sbiw and activate required data source
    replicate data sources in BW:
    RSA1 -> source systems -> right click on your source system -> replicate
    then activate your BC:
    service.sap.com/bi -> BI Business Content -> General Information -> SAP BW Business Content - Activation
    and execute infopackage (it should be delivered with BC)
    Useful links:
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    service.sap.com/bi -> BI InfoIndex
    sdn.sap.com -> Business Information Warehouse -> How-To guides (under Quick Links)
    Assign points if useful.

Maybe you are looking for

  • ORA-28750 Unknown Error while trying to execute an external app's API call?

    New to using web services in PLSQL Environment Database: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi PL/SQL Release 10.2.0.4.0 - Production CORE 10.2.0.4.0 Production TNS for Linux IA64: Version 10.2.0.4.0 - Production NLSRTL Ver

  • OS 9 unable to boot after running classic in OS X Tiger fro first time

    I have this problem with dual boot on an iMac 400 after upgrading the OS X to Tiger. After I install the Tiger, I tried to boot up from OS 9 is OK.I restarted in OS X and launch the classic environment, it performs some update to the System Folder an

  • Syncing bookmarks from Firefox in iTunes for 3GS?

    When you sync your iPhone it gives you the option to sync bookmarks from IE or Safari, but I use Firefox and this doesn't show on the menu... what am I doing wrong?

  • Binding of a wait for event task

    Friends, I'm sorry because I wrote about terminating events, but I wanted to ask about <b>'wait for event task'</b>. I know that isn't obligatory to make binding of wait for event tasks. I've configured without binding, and it is working fine on deve

  • CR IX R2: SQL Expression Editor - Max on Group

    This works, but it only shows the MAX value of the entire column, for all teams: (SELECT MAX("PlanSegment_Team"."priority") FROM   (("Plan" INNER JOIN "PlanSegment" ON "Plan"."pkPlan"="PlanSegment"."fkPlan") INNER JOIN "PlanSegment_Team" "PlanSegment