What is reason for authrorization group field not showing in FD01 tocde

Hi,
The authrization group is showing under Control data when i am creating the customer manually by using the tcode FD01.but when i am creating the customer through BDC program by using same tcode its giving the error message
error message is aurization group( Field KNA1-BEGRU. does not exist in the screen SAPMF02D 0120 ).
can any body help on the above issue if knows.

perhaps check field-sttuas of your account group
tcodes: ob23 and obd3
Message was edited by:
Andreas Mann

Similar Messages

Ledger Group field NOT showing in FB03 after activating Non- Leading ledger

Dear All Experts,
I have activated non leading ledger for my company code and posted the document successfully from FB60. Now coming to FB03 I can see the document in Local Currency and Group Currency - USD but the Ledger Group field still shows complete blank. As I guess it MUST show 1F ( Non Leadig Ledger ) which is my non leading ledger.
Where I missed the configurtation step ? If anybody has gone through the same issue please guide or provide some inputs.
Regards,
Revati Joshi.

Non-leading ledger use t codes FB01L and FB50L
The reason that the Ledger Group 0L is being used it´s because the Accouting Principle of your Valuation Area.
What you have to do is you need to create a new Ledger Group and assgn it to your valutaion area.
Then you assign this accounting principle to the valution area.
Then assign the accounting principle to no Ledger Group.
Please see the customizing path:
Define new Ledger Group:
Financial Accounting (New)>Financial Accounting Global Settings (New)>Ledgers>Ledger>Define Ledgers for General Ledger Accounting (dont active your new ledger as leading ledger. leave the standard as the leading )
Assign Accounting Principle to none New Gl Group:
Financial Accounting (New)>General Ledger Accounting (New)>Periodic Processing>Valuate>Check Assignment of Accounting Principle to Ledger Group
Assign your Valuation Area to the accounting principel just assigned to none NewGL Group:
Financial Accounting (New)>General Ledger Accounting (New)>Periodic Processing>Valuate>Assign Valuation Areas and Accounting Principles
Now you have more then one Ledger Group in you client (which is not being used for nothing) and you have a valuation area that is linked to a Accounting Principle that is linked to no Ledger Group.
Go ahead now and execute the FAGLF101. You will see that the standard will not try to inform leading ledger in the Group of Ledger.
I found this solutiong debbuging the standard. Took me quite a bit to discover.
The problem was in SPRO->Financial Accounting(New)->General Ledger Accounting(New)->Periodic Processing->Valuate->Check Assignment of Accounting Principle to Ledger Group. In "Target Ledger Group" field, the ledger "0L" were configured in BRAP and GAAP. So, the system automatically assigned the ledger "0L" when performing FAGLF101.

HT204003 if i open passbook on iphone 5, it always say cannot connect to itunes, any fix from apple tech support? and whats the reason for this problem? why do we have to figure it out and not even apple can give answer??

if i open passbook on iphone 5, it always say cannot connect to itunes, any fix from apple tech support? and whats the reason for this problem? why do we have to figure it out and not even apple can give answer??

actually i found out how to fix it
1 sign out of apple account
2 close down passbook app
3 change year to 2013
4 reopen passbook and sign in at the button with your apple ID
5 change the time to auto update and it should work from now on.
this worked for me let me know if it work for you:)

Downloded apps are not workning after sync on PC on ipad 2 ! what is reason for this ?

Hi,
My Downloded apps are not workning after sync with PC on ipad 2 ! what is reason for this ?

Download any free App and test if it'll get all the others Apps working.

HT1338 Hi I am getting a light whitish bluish mark whenever i see any darker pictures. Whats the reason for it?

Hi I am getting a light whitish bluish mark whenever i see any darker pictures. Whats the reason for it?

Actually, here's a clearer image. The middle stroke is with 20% drawing smoothness, and 100% pressure strength.
The top stroke is 100% both, and the bottom is 100% drawing smoothness with 20% pressure strength.
In all three instances, the dark watercolorish ring persists.

Text Fields Not Showing in Design or Live View

Hello Everyone,
I have run into a problem trying to create a simple contact form through Dreamweaver CS6. I have two text fields for Name & Email, and 1 text area for Comments. The issue I am running into is that the text fields are not showing in Design or Live view. I have set-up all variables required for the server for the form to work... but that should not have any effect on the text field showing... I tried uploading my contact page with the same result of no text fields showing...
What is really laughable is that the "text area" I placed in my form for Comments shows up in Design & Live view just fine. I am thinking that I am missing something, but just do not know what exactly. The form is styled through CSS.
Here is the form code:
     <div id="CRDForm">
       <form action="http://www.sweetformimi.com/formmail/formmail.php" method="post" enctype="application/x-www-form-urlencoded" name="contact" target="_self" id="contact">
    <input type="hidden" name="env_report" value="REMOTE_HOST,REMOTE_ADDR,HTTP_USER_AGENT,AUTH_TYPE,REMOTE_USER">
    <input type="hidden" name="recipients" value="[email protected]" />
    <input type="hidden" name="subject" value="Contact Form" />
         <label><p>Your Full Name
           <input name="Name" type="text" id="Name" size="40" /></p>
         </label>
         <label><p>Email
         <input name="email" type="text" accesskey="2" tabindex="2" title="Email" value="Email"></p>
         </label>
         <label>Comments<br />
         <textarea name="comments" cols="40" rows="10" accesskey="3" tabindex="3" title="Comments"></textarea>
         </label>
         <input name="submit" type="submit" accesskey="4" tabindex="4" title="submit" value="submit">
       </form>
    </div>
Are there other variables I should be thinking about in the rest of my site? I am using a fluid grid layout. I have CSS for desktop, tablet, and phone devices. I also have a primary CSS file that imports all three. The sites structure was done by using <header>, <article>, <footer>, and of course <div> tags.
Has anyone ever experienced the "text fields" not showing up before? Is it a simple fix as reinstalling Dreamweaver CS6? Finally, another thing I should mention is that I did have a previous version of Dreamweaver on my comp, which was CS3. I did not uninstall that before installing the newer version. I assumed (and I could be wrong here) that it would automatically replace the older version.
I apoligize for it being long winded, but I am looking for some help on this issue...
Thank You

Hey thank you osgood for the reply!
When I look at code for long hours it sort of blurs together, and I miss things... I think that happens to the most of us
Ya I found what was blocking my text fields in my desktop.css
I primarily work through code view, and currently working on quite a few projects kind of makes your eyes miss the small errors.
Thanks again!

Fields not showing up in TaskForm

Hi,
I've been asked to go through this BPM Foundation Labs tutorial/demo thingy, and I'm encountering a problem where the input form I autogenerated for the task does not show the controls/fields on the page when I actually run the task. (I can see the controls in the editor of JDeveloper if I try to view the taskdetails.jspx). The child record grids which have insert/delete buttons to add rows are working though, i.e. I can click insert and a row of edit boxes appears.
Any idea? Not sure if I missed anything. The business object parameter is already marked as editable in the task.
Thanks,
Roy

Hi,
When you select the radio button exclusion group, go to the Object > Binding palette. There the binding is set to "no data binding". This means that the object will not participate in data processing, eg import or export.
Change this to "use name" or "normal" (depending on the version of LC Designer that you are using).
Hope that helps,
Niall

I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps

HT4236 What do I do if "photos" is not showing up as an option under "My Device" in the iTunes window?

What do I do if "photos" is not showing up under "My Device" when I plug my phone in and the iTunes windo opens? I had my phone reset yesterday b/c of picture texting/software problems. It wiped it clean! I had to start again like it was a NEW phone and use my backup info on my computer to sync my information. I have restored my contacts, calendars, music, etc...but, I can't get my pictures back. HELP!

If the iTunes window is set as wide as possible on your computer screen, try changing your computer screen resolution

I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

The TIme Machine volume does not have that checkbox.
I think the issue is with your Finder...
Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again.
(You will have to reset a few finder prefs the way you like them.)

I have just installed CS5 and my option for installing actions is not showing up,....how do I install them?

I have just installed CS5 and my option for installing actions is not showing up,....how do I install them?

I just didn't have my actions palette checked. Done. Thanks.

[svn:fx-trunk] 13128: Fix for ASDoc tooltips does not show ASDoc for some functions

Revision: 13128
Revision: 13128
Author:   [email protected]
Date:     2009-12-21 13:46:32 -0800 (Mon, 21 Dec 2009)
Log Message:
Fix for ASDoc tooltips does not show ASDoc for some functions
QE notes: None.
Doc notes: None
Bugs: SDK-24751
Reviewed By:Paul
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24751
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelGenerator.java

Welcome guy -
Unless you are using Spry menus as a learning experience, you should move forward to a menus system that will display properly on the millions of portable devices that won't work with Spry which was deprecated 2 years ago.
Many are using JQuery menus or pure HTML/CSS menus.
If you wish to continue your Spry for learning experience, we'll be glad to assist; please let us know.
By the way, your submenus are not showing because you need to add the red value to this rule in your vertical CSS
ul.MenuBarVertical ul.MenuBarSubmenuVisible{
    width: 220px;
    left: 180px;

What is reason for cl_fpm_factory= get_instance( ) return initial value?

In DEV system, this piece of code is working fine. However when it moves to Testing system it dump due to cl_fpm_factory=>get_instance( ) return initial value. What could be the reason for this? Thanks!
data lo_fpm type ref to if_fpm.
lo_fpm = cl_fpm_factory=>get_instance( ).
wd_this->go_message_manager = lo_fpm->mo_message_manager.

Hi Anthony,
how sure are you that the DEV and Test system running the same Netweaver SP versions ?. My doubt is that the test system is not NW7.01 (Ehp-1) . Or some thigs are not enabled in the configuration.
Regards
Senthi

SPM 5.2 - problem with reason/activity fields - not showing in the report

Dear experts,
I have a situation that is hard to describe.
We have SPM 5.2 - all set and working, now the problem is that for some of the FF sessions the tool is either not reporting the reason/activity fields (due to some technical problem that is occuring randomly) or the users have found a way to abuse the fields and make thier way around them. (these fields are very important for our SOX controls)
I have created test users to see how they are entering without filling the reason/activity fields, but no luck - i couldnt enter.
As you know the Activity field is mandatory text field and at least one character must be entered, but I don`t think this is the workaround, because even if you put space the report still will show it. I have examples where the report is not showing anything.
The worst is that I can`t simulate such cases.
Have you ever heard of such nosense?
Thank you,
Iliya

I think I found it - Application deficiency. It is the language that you are logged with. If it is not English the application is not recording the text that you type in the reason/activity fields upon FF session.
I hope the latest patches are fixing this!
BR
Iliya

Possible reasons for a repository manager not displayed under KM Content

Hi,
I developed a repository manager and deployed the par file Archive uploader.
Most time after deployment, I can see immediately an instance of the repository manager under KM Content. However, sometimes, when I made some changes to the code, it doesn't appear under KM Content. The deployment log in SYS/global/config/cm/reports shows no error.
I tried to find some log in System Administration - Monitor, but found nothing.
So, could anyone tell me:
1. What might be the reason for the problem that the repository manager cannot display under KM Content after deploying the par?
2. Where can I find the log explaining why my repository manager cannot display?
Thanks,
Ray

Hi Ray,
Deploying a repository manager means a hot KM deployment, which isn't supported at all, see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb1f18be-0801-0010-ffa0-e3495f7401bc and SAP note 894884. After such a deployment, the KM is restarted, but you have some kind of "shadow KM" in memory, which leads for most things to an unpredictable behaviour.
In contrast to the documents reffered to above, also the standard KM delivery from SAP still behaves in an uncontrolled way for many issues.
That's why after a KM hot deployment, you should restart your server if you realize anything "unusual". A workaround is to debug your code and using the hot code replacement feature (which only works in some situations, but that's better than nothing...).
Hope it helps
Detlev

What is reason for authrorization group field not showing in FD01 tocde

Similar Messages

Maybe you are looking for