What is Reconciliation ? and how to perform step by step?
What is Reconciliation ? and how to perform step by step?
Hi Rajasekhar MP
Reconciliation is nothing but the comaprision of the values between BW target
data with the Source system data like R/3,JD edwards,Oracle,ECC or SCM or
SRM.
In general this process is taken @ 3 places one is comparing the info provider
data with R/3 data,Compare the Query display data with R/3 or ODS data and
Checking the data available in info provider kefigure with PSA key figure values..
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> What is Reconciliation ? and how to perform step by
> step?
Similar Messages
-
What is "other" and how to get rid of it?
I have attached a picture of the "other" on my MacBook Pro. I've run CleanMyMac 2, Gemini Pro, and other programs to clean out my computer, and I STILL have tons of "other" files eating up my memory. What is it and what can I do to clean out my hard drive? Thanks for the help!
For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
My storage is almost used up by 40gigs of'Other'. What is this and how do I reduce it?
Can anyone help on this storage problem? On a PC you just run disk clean up routine but what do you do on a Mac?
For information about the Other category in the Storage display, see this support article.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal. -
Safari and calendar won't open due to 'calendar persistence plug- in problems'. Does anyone know what this means and how to resolve it please?
mac book pro with Mavericks 10.9.5Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I just purchased a Mac and downloaded my previously purchased songs from iTunes, however it only downloaded a portion of the song (about 1:15) and this appears to be the same on all of the songs. What is happening and how can I fix it?
Hello Pork Chop 2,
Congratulations on your new Mac! It sounds like your purchased songs are not playing completely after you downloaded them. I recommend to following steps for an issue like this:
Symptoms
Occasionally, if a song purchased from the iTunes Store on a Mac or PC was not downloaded completely, the song may not play back fully. The song may abruptly stop during playback, and iTunes may start playing the next song in your library or playlist.
Resolution
If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
Delete the purchased song that is exhibiting the problem from your iTunes library.
Click on the Purchased link in the iTunes Store to view your previously purchased music.
Download your previously purchased song from this list.
You can find the full article here:
Songs in iTunes may not play back completely
http://support.apple.com/kb/TS4357
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
The icon "pesonal hotspot" keeps disappearing om my iphone.what causes this and how do i rectify it?
the icon "personal hotspot" keeps disappearing on my iphone,what causes this and how do i rectify this?
Here is Apple's latest response to the FaceTime issue that cropped up last week:
FaceTime 4-16 Issue
Folllow the troubleshooting steps to try to resolve your issues.
Cheers,
GB -
Bad pop ups and this thing called macsweeper. what us it and how do I get rid of it
I gave bad pop ups and this thing called macsweeper. What is it and how do I get rid of it. Thanks
There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
What is polipo and how do i get it? My tor access will not pull up any sites without it.
What is polipo and how do i get it? My tor access will not pull up any sites without it.
== This happened ==
Just once or twice
== tried to load any site: yahoo, gmail, etc.Thanks for the response Steve. I can create a .flv file, I can create an .avi file and I can burn to a file. However, using Premiere, when I drop that .avi into the new timeline and try to burn it to disk, I get the same message" operating system error: number 0x000004c8- The requested operation cannot be performed on a file with a usermap". It would be good to be able to burn from Premiere Elements but I cannot seem to. However, as you suggested, I have a work around.
I've done some research and it seems usermap is connected to Windows 7 permissions and I have had a problem in PE9 accessing files and getting a permissions error. Don't know if this is a PE9 conflict or just a W7 issue. If you have any thoughts, I'd appreciate them. If I find anything further I'll post it here.
Cheers -
This whole situation first started with a complaint from my ISP that it appeared I had a trojan virus... around 1100-1200 messages per hour were being run through their servers via my account. I have also Anti-Virus enabled, so I was left scratching my head...
No viruses found on a full scan - so I started watching processes and connections. This nmbd process is suspicious... I don't run windows file sharing, nor have I ever. This just popped up recently. I also had two mac tech support calls, and one to Symantec - and it ran fine for a couple of days - but it's back again.
What is this, and how can I find the culprit, and remove it permanently...?
Thanks in advance for any advice!
--JeffThanks Thomas, appreciate the insight! Thanks for taking the time to help me think through this...
I have reset the password twice now...
It's only impacting one account, and the ISP says it's local to me - somewhere on my local network.
I do have a few devices on my home network. The only one with windows is my macbook air running parallels. I just use this to browse some web projects I work on (view in IE to make sure everything is looking like it should).
The passwords I have used both times - they were ones set by my isp - the type you can't remember, they seem rather strong (upper/lower case letters, numbers, symbols). That's what leads me to believe it's also local - something on my machine. And it only seems to be impacting one email account (I have 5 running in Mac Mail).
WiFi network is protected by WPA2 - just checked to be sure. All good there.
Now, in Norton Firewall log - I can see incoming and outgoing connections via Windows File Sharing/nmbd.
The reason I feel/felt that this is related to the spam sends is that once I saw the number of connects, and roughly equals the number of sends per hour of spam - I stopped the process with the firewall and suddenly my isp says the spam sends stop. That led me to believe they are related. Perhaps this virus or malware has spoofed it's name and is identifying itself as nmbd? I have no idea. Just scared to turn it all off just yet.
I did notice that Moutain Lion does not run this... (nmbd).
I did wonder about the Air sending something off of windows - but this all happened while it was off, laying on the desk next to me. It rarely gets used unless I'm testing or traveling.
I can understand nmbd being useful part of the system, I cannot understand how it would be very useful if I didn't turn it on, it connects at that frequency, and I don't have file sharing enabled. That's why I am hesitant to turn Norton off, and hope that everything just goes away. I want to try and get this problem figured out as simply turning Norton off doesn't seem like I'm taking steps to eliminate the problem. Perhaps Norton is causing other issues - and I'll be removing the software asap - but want to make sure the spam sends cease.
Let me know if that sparks any ideas... Thanks again!
--Jeff -
Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?
Hey HaydenJulie,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides information on permissions issues with iTunes. The troubleshooting steps included may resolve your issue:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M. -
I tried to order a book on iphoto but got the following message from Apple : "the file contains text with drop shadows. As a result Apple is unable to process your order" Does anyone know what this means and how to fix it? Thanks!!
Hello Katiebell62
Check out the troubleshooting steps to try and resolve your issue with purchasing a book through iPhoto.
iPhoto: Difficulty submitting a book, card, or calendar order
http://support.apple.com/kb/TS2516
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
When I try to update my ipad to IOS6 I get and error 6 message. Any idea what that means and how to fix it? I tried updating via Itunes and also normal download.
What model iPad and what version of iOS is it currently running?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Message was edited by: Texas Mac Man -
What is LogTransport2 and how do I close it?
Trying to update my Adobe Creative Cloud apps and keep getting "Please close the following applications to continue" - LogTransport2." What is LogTranspport2 and how do I close it?
System:
Hardware Overview:
Model Name: iMac 27"
Model Identifier: iMac13,2
Processor Name: Intel Core i7
Processor Speed: 3.4 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
System Software Overview:
System Version: OS X 10.9 (13A603) Maverick
Kernel Version: Darwin 13.0.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Secure Virtual Memory: EnabledStep 1.
Open: Activity Monitor
find - LogTransport2 sellect and click Quick Process.
Step 2.
(if you don't see "LogTransport2 on the Activity monitor)
- go to Spotlight Search and type LogTransport2 find and click it, and go back to Step 1.
- Continue Update.
Maybe you are looking for
-
On Screen Keyboard with Quickweb
How do you access the on screen keyboard when your in quickweb if you are using the system in tablet setup?
-
Trying to install OSX Yosemite but it keeps failing - how can I tell if my iMac is too old? Curently running OS x 10.6.8
-
DUMP (COMPUTE_BCD_OVERFLOW), when we are attenting to make an invoice MR1M
We are presenting a DUMP (COMPUTE_BCD_OVERFLOW), when we are attenting to make an invoice in trans: MR1M The termination occurred in the ABAP/4 program "SAPLMRMP " in "SPERRGRUND_T". The main program was "SAPLMR1M ". The termination occurre
-
Problems after updating to IOS 8.0.2
I Updated my IPad 2 to IOS 8.0.2 and got lots of problems.. Screen freezing, can't scroll, keypad locking, some icons on home screen changed to white. IPad screen intermittently not responding to touch and not showing cursor when typing. ANY IDEAS WH
-
Adobe Acrobat 7 printer not recognized.
Need to be able to print to PDF. Used this feature in Win XP just fine. New computer with Win 8 does not recognize the PDF printer. No download available from Adobe website for the distiller (yes, there is an Adobe Distiller "server" but this will