What is reload reload software 552 nd how to fix it?

what is reload reload software 552 nd how to fix it?

Hi
This what I did to completely wipe my BB. I wrote this before starting and printed it off.
If your device is functioning, perform a backup now if you haven't already done so saving the file to a place and in a name that you can easily locate on computer.
I then uninstalled DTM and then deleted all other references to BB/Rim in Windows Explorer thus removing the OS for the BB from the computer in order to ensure that the version I would reinstall would be a brand new downloaded version.
Get the latest Desk Top Software (DTS)
http://us.blackberry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&cp=OTC-DSKTPSW
and install it on the computer.
Get the correct latest version of the OS
http://us.blackberry.com/support/downloads/download_sites.jsp
and save it to computer.
If the PC does not recognize the BB, You need to connect the via the USB cable. Then pull the battery from the BB.
With the battery pulled, connect the BlackBerry to the USB connector and as SOON as you see USB-PIN:UNKNOWN hit Next. You have to be quick. From there you can put the battery back in (make sure you install the battery or else when the OS update is completing and the device disconnects from the computer to reboot, it will lose the power provided by the USB connection and you will get an error and have to do it all over again!).
If you don't get it right the first time, try again (unplug from USB, pull battery, connect and hit Next while USB-PIN:Unknown is showing). You have to be fast and the timing is key, so it may take you three or four attempts.
To erase all the data on your BlackBerry device, complete the following steps.
1) Download JL_Cmder from http://www.4shared.com/get/oqP9V-2Q/JL_Cmder_v19.html
2) Install JL_Cmder to computer.
3) Double check you have already backed-up the BB. If you DO NOT, you will lose ALL data.
4) Make sure the DTS is closed and plug in the BB to computer via USB
5) Go to the JL_Cmder on your computer and double click it to start. Now,this may take a few tries to connect, so keep trying until it does.
6) On the first screen, Press any key to continue.
7) Now, if your device uses a password, enter it now. If not, press "N"
8) Press 4 to initiate the WIPE
9) Press "Y" to continue
10) Now type "blackberry" to continue
11) On the BB you will see a white screen with a'507' Error. Don't worry, this is what you want! You are now ready to install the OS.
Launch the new Desk Top Software on the computer
1). On the home screen of the BlackBerry® Desktop Software, click Device > Update my device.
2). Click View Other Versions. Click the version of the new OS you previously downloaded.
3). Click Install. The DTM will install the OS and then provide you with a list of applications to install. If you have had difficulties with an app, do not install it.
Do not disconnect the device until the whole process is completed and the device has rebooted.
After 10 minutes reboot again by removing the battery whilst powered-on and leave it out for a couple of minutes.
Leave it again for 10 minutes. You should now have a fully functioning BB!
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

Similar Messages

I have downloaded ios 5.1.1 and the wifi has stop working or it would stay on for less then 20min its only 9 months old can someone explain what is happening and if some know how to fix it

I have downloaded ios 5.1.1 and the wifi has stop working or it would stay on for less then 20min its only 9 months old can someone explain what is happening and if some know how to fix it

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

What is error code 3014? And How to fix it?

What is error code 3014? And How to fix it?

Error code 3014 is covered on this page : http://support.apple.com/kb/TS3694 - click on '3014' in the list of errors at the top of the page and it should take you to some troubleshooting for it ('network connection or download errors')

All my photos are importing out of order. For example, if I have images 1,2,3, and 4.., the order they show up in is 2,1,4,3. What could cause this and any ideas how I fix it?

All my photos are importing out of order. For example, if I have images 1,2,3, and 4.., the order they show up in is 2,1,4,3. What could cause this and any ideas how I fix it?

One thing, don;t think of them as being imported in any one particular order.
The order of the images is completely fluid, you can change it anytime you want to suit your needs at that particular moment.
As Léonie showed you select the order you want to see the images in by selecting the item you want to sort on in the pull-down.
The only time fluid sort order can be a problem is when you export groups of images. If you put the images into a particular order in Aperture when you export them and view them in the Finder the order they are in may very well be different. In this case you could give names to the images that include a sequence number or index.
Then when they are viewd in the Finder they will be in them same order they were in in Aperture.
regards

HT201442 What is error 3194 for Iphone? How to fix it

What is error 3194 for Iphone 3GS? How to fix it?

This usually occurs if your iTunes vesion is out of date, when your device has been hacked in attempt to downgrade the iOS or you used hacking software such as tinyumbrella that altered you computer hosts file.
See this:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'

What does this mean and why? How to fix?Mac OS X Version 10.8.56.6 (1510/1508). It can't be used on Mac OS X Version 10.8.5 (Build 12F37).

6.6 (1510/1508). It can’t be used on Mac OS X Version 10.8.5 (Build 12F37). what does this mean and how to fix?

kgpmcn wrote:
Crows are birds.
Crows are black.
Therefore black birds are crows.
The build I have is the released build of Mail. I reinstalled it as directed and it didn't help. That indicates that the problem is with my version of OS X.
The build you have is the released build of 10.8.5. You reinstalled it as directed and it didn't help. That indicates it is a problem with your version of Mail.
The above are examples of flawed logic.
Seriously now. Since you obviously don't know what a Combo Update is, I will tell you. A Combo Update is short for a COMBINATION of Updates. That means that there is MORE THAN ONE update in a Combo Update. It is, therefore, quite proper to speak of "one of the Combo Updates". For people whose first language is not English and are not familiar with its subtle nuances, perhaps I should have said "One of the updates contained within the Combo Update was"
"There aren't "versions" of the combo update, unless Apple releases a revision"?
This is plain silly. It means "There aren't versions unless there are"
Also I didn't use the word "version". See above for the explanation of what I DID say.
Are you one of those TROLLS I keep hearing about?
I hope you got a lot of phoney Help points for not actually helping.
Don't bother replying, I won't come back to this thread, so I wont see it. Of course you'll get another phoney Help point, so I suppose you will, but I'll never know. Doesn't that mess with your head?
Bye Bye
What an attitude you have.
Erase your drive and reinstall correctly, stop messing about with incremental patches. The routine you need is BERR (backup, erase, reinstall, restore) or just stay as yu are, it is entirely up to you.
kgpmcn wrote:
Are you one of those TROLLS I keep hearing about?
I hope you got a lot of phoney Help points for not actually helping.
The depth of your ignorance shows here, there are no phoney points, only ones awarded by posters who receive solutions, and only at the original posters choice.

When i synch my ipod touch i get the following message " the ipod cannot be synced. the required file cannot be found" what does this mean? anyone know how to fix it?

When I synch my ipod touch I get the following message "The Ipod touch cannot be synced. The required file cannot be found". Does anyone know what this means and how to fix it? this error occurs at the point it is syncing the photos - all other things seem to be syncing fine.

Hello sanbrunostew,
Try trashing your iPod's Photo Cache. See this article for information on where to find your iPod's Photo Cache.
iTunes: Understanding the iPod Photo Cache folder
B-rock

Creative Zen Xtra Firmware Failure/Reload OS- Here's the how to fix

I know all of you must be excited just reading the word Fix.
Alright here is a very simple guide how to get that "upgrade button" back on the firmware upgrade software.
Considering that you have reached this point because you tried and failed to load firmware 2.0.3.0 because creative sucks.. well i have more bad news for you.. the only way that players is going to work now is you have to retry that crappy firmware and hope it'll work once.. so have it ready on your desktop. Remember you can't revert to old firmware.
OK, now the most important thing is requirements: You need to have all of these requirements:
.Win XP SP2
2.Window Media player 0 with all the updates (go to microsoft and update it!)
Now you need to go to Device Manager, while your player is connected to your PC and find that MTP (ussually all the way at the bottom of the list). higlight it and update it's drivers (requires internet connection)
After doing that, you would have to Delete all of your USB Controllers. It is not messed up, but it is the only way for creative crappy software and player to re-connect.
Now when your done go to that firmware update and the Upgrade button should be Lit up once again.. and hope this time the upgrade works.. if not. well repeat all steps again.
Note: Be sure the Battery is FULLY charged, plugging it to a power outlet doesnt do the trick. If the battery is to low the firmware will say it wont proceed because of battery. Another creative dumbass programming.

On your desktop.
. Right click My Computer.
2. Click on Hardware Tab
3. Click Device Manager
4. Click Uni'versal Serial Bus Controllers +
5. Right Click Each of them and Click Unninstall
6. Restart your computer (press Windows button and use keyboard and select Shutdown)
7. Windows will automatically re-install USB drivers. Make sure Nomad Is not Connected
8. Go Back to Device Manager, and plug in your Nomad. Window will detect it and place it under MTP Devices.
9. Creative Mediasource Will not Detect it.
0.Right Click MTP device and chose Update Driver.
Now go to the firmware upgrade software you downloaded. Must be the latest version, the playfor sure version.
Click the upgrade button.
To use media source, you have to download the playforsure plug in for Play for sure firmware.
Without it, you can only use window media player 0. If you dont have window media player 0, you have to download it.

Loaded 20.1. When I add Session Manager extension, address & search bars disappear. Can't retreive unless I reload Firefox from scratch. How to fix?

No prior Firefox version. Started with 20.1. Have not loaded 20.1 on my other computers, so i don't know if the problem is universal. Need Session Manager because Firefox crashes frequently.

Session Manager has had a lot of bug fixes the past week, I suspect mostly related to the new per-window private browsing feature. Could you try the new version 0.8.0.5? You need to use the "Versions" page to get it, as it hasn't yet been approved for the main page:
https://addons.mozilla.org/en-US/firefox/addon/session-manager/versions/#version-0.8.0.5
Hope that helps. You'll also see some even newer pre-release versions addressing specific bugs. I wouldn't try those just yet unless you see that one of them fixes issues you find in 0.8.0.5.

The mac book pro cannot detect the internal speaker. What's the possible causes? and how to fix it?

I've connect the mac book pro to my LED TV with the headphone port as my audio output. After I disconnect it, the internal speaker did not work and the mac could not detect it from the system preference. What is the problem? Is it because of the hardware or software problem? Please help.

Please detail all you have done to resolve your issue. Need this information so that the users can avoid the "been there, done that" scenario type responses. This is to avoid repeating the troubleshooting you may have already tried. Thank you.

Mac software not connecting to internet, but installed software does. How to fix?

iTunes, Safari, App Store, etc. behaves as though there is no internet connection. Loading bar on Safari is frozen, iTunes can't access Gracenote for burning CD's. Google Chrome works perfectly fine, Guitar Pro works fine, Evernote works. I've never encountered this problem before. I've tried restarting the computer, shutting it down and turning it on again, and looking for answers on Google. Can anyone here help with this?

You should be able to connect via Ethernet, and that method is simpler than debugging wireless.
the Ethernet light turned Green and said it was connected, but still no internet...
What exactly do you mean by "still no Internet? "
Sometimes you can be connected perfectly well, but problems with Domain Name Servers (DNS) can keep you from loading Web pages.
Try this "litmus test". Get your Ethernet connection green light. Enter this in your browser:
http://17.149.160.49
if you get to Apple, Inc, you are properly connected.
http://apple.com
If the symbolic name does NOT connect you to Apple, Inc, you have a Domain Name Server (DNS) problem.

My ipod's sound is echoeing when i put earplug...what is it?....how to fix it?

i went to apple customer serivice centr ....but he straight away said that"we just replace no repairing".....so what should i do????:(

Does it sound that way with the built-in speaker?
Have you tried another set of headphones?
Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the Pod to factory defaults/new iPod.

What does NSURLErrorDomain error -1100 mean and how to fix it

I been getting "NSURLErrorDomain error-1100" whenever I check for software updates for my MBA 2011 13' 10.8.1. it started yesterday. I can get third party apps updates but not OSX or other apple software updates. I tried rebooting but did not make a difference. please help,

See this thread:
https://discussions.apple.com/thread/4291510?tstart=0

Any ideas on what an error message 9008 means, and how i fix it on an Ipod Nano7

I tried to change an Ipod Nano that i had been using on a Mac to sync with a Windows machine ...that gave all sorts of problems , so I have given up on that idea .Now I can't get the thing to work on my Mac either ...trying to reset to factory settings eventually leads to the error message 9008 ....and I seemingly have a small brick on my hands as nothing I have tried seems to make a difference .
Any Ideas ?

okay, something seems to work after wiping the IPod in Disc utility .....now I get a message along these lines ........."cannot reset because the iPod cannot be unmounted" ...
Does anyone know what do I do about his ?....Anyone even have any ideas ?

Whenever I try to use my macbook, it will work for about 10 min. then the screen will go black, the computer will not respond to my commands, and I have to restart it. Can anyone tell me what's going on, and how to fix it? Thank you!!!

Hello everyone, like most people on this site, I am having difficulties understanding and fixing my Macbook Pro. About a month ago my computer screen went black, the computer was unresponsive, and it started making a beeping noise. I restarted the computer, and it seemed to have fixed itself. 6 days ago, I put my laptop into it's case with some papers, went home (about 30 min. after putting laptop into case), and opened my bag. My computer's fans were on, the computer was really hot, and when I opened the computer, the screen was black and unresponsive. I turned it off, let it cool down, turned it back on, started to stream a video on Hulu, and about ten minutes after, the screen went black again and the computer was unresponsive. Now everytime I turn it on after about ten to fifteen minutes the screen will go black, the computer will become unresponsive, and I have to shut it off. The weird thing though is that everytime I restart my computer, when I reopen my account, my computer acts as if nothing has happened, and everything I had opened or unsaved is still there without autosave saving the documents.The screen also goes black and the computer becomes unresposive when I move the computer around. I get a lot of pop-up ads and other crap on my computer when I am on the internet. I don't know if one of those pop-up websites might have given me a virus or may be the cause of this problem. I don't now what is wrong with my computer or how to fix it, but if anyone has any advice, I WOULD GREATLY APPRECIATE IT!!!!!!! Thank you very much!!!
-- Sincerely, A very confused, scared, and hopless Macbok Owner

To get rid of "pop-up ads and other crap on my computer when I am on the internet", click on Safari in the Menu bar, and select Preferences. Next select Extensions. Delete all of them. Restart Safari.
The first step in addressing the black screen is an SMC reset.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Excerpt from
http://support.apple.com/kb/ht39

What is reload reload software 552 nd how to fix it?

Similar Messages

Maybe you are looking for