What is "Remediate" checkbox under PRO Monitor Configuration

Hi,
I deployed SCVMM 2012 R2 and integrated with SCOM 2012 R2 for ProTips and DO testing, but i have below queries.
1) ProTips are getting generated only for VMs which are configured with Dynamic Memory and not for VMs with Fix Memory.
2) Don't get any ProTip alert when i increase Host memory usage to 90% using "testlimit64.exe"(Sysinternal Utility for stimulating the memory pressure)
3) What is "Remediate" checkbox under PRO Monitor Configuration ? when to use it ? any example ?
Thanks,
Mayur
MayurG

1) That's by design. The monitor is designed for DM VMs only.
2) To trigger VM Pressure alert, you need to increase VM Memory demand i.e. run testlimit inside the VM.
3) Remediate is not implemented by default for these monitors so nothing will happen if u select them. However, it can be implemented by extending the MP and if selected , SCOM will auto trigger the defined remediation.
thanks
Chetan
[Disclaimer] This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all.

Similar Messages

I would like to display what's on my Mac Pro monitor on my iPad with as little latency as possible. What's the best way to do this?

I would like to display what's on my Mac Pro monitor on my iPad with as little latency as possible. What's the best way to do this?

Your image history (if I understand you properly) is stored in your catalog file, and nowhere else, and so it is only on a single drive.
Do you mean you have edited photos on multiple drives? This isn't a problem for Lightroom at all, the software doesn't care, and you can leave things just the way they are. But if it bothers you for some reason, you can move the photos to a single drive if you want. In Lightroom select the desired photos or folders (it's easier to do this using Folders) and drag them to the desired drive.
Alternative if you will be moving lots of folders: Adobe Lightroom - Find moved or missing files and folders

Under Activity Monitor, what is rapportd?

My MacBook Pro was being slow so I had a look under Activity Monitor to see what was going on.
Firefox had hogging lots of RAM even when I'd quit the program! (It wasn't in the 'force quit' list either). Anyway this is a separate matter, and a simple restart of my computer seems to have sorted it.
However, before restarting, I noticed "rapportd" in red and not responding. I thought the restart would have sorted that too, but it's still not responding.
My question(s): What is it? And why is it not responding?

have a look @ [this|http://discussions.apple.com/thread.jspa?messageID=10674317] discussion.
JGG

Generate report for Recovery task configured under Unit monitor

How to create report for the recovery task run under Unit monitor. Whether it run successfully or is there was any failure status reported. or we can use any power shell command to extract such details.
Omkar umarani SCOM STUDENT

Hi,
Try using ping www.bing.com >>status-report.txt, the results will append to the txt file.
Diagnostic and Recovery Tasks
https://technet.microsoft.com/en-us/library/hh551141.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

What is the best way of monitoring HD content in FCP?

I hope to get the Mac Pro listed below, What is the best way of monitoring my HD edit from FCP?
Can I output to a HDTV, or is a computer monitor better?
Do I need a capture card to output the signal, or is my below system adequate? i don't need one for capturing as i have will be using a Panasonic AG-HVX200 with P2 card, Can i use this camera to output to a TV/Monitor?
Message was edited by: calihal

Well, given your situation, the best option is the Matrox MXO and Apple Cinema Display. I have a full review here as to why it is a good solution.
http://library.creativecow.net/articles/ross_shane/MXO.php
This will cost you $995 for the MXO, and $900 for the Apple display. So under $2k. The other options are more expensive. Broadcast quality HD LCDs start at $3500. And other capture cards range from $295 (decklink Intensity) to $3500 (AJA and Decklink). And HDTV will still require a capture card, like the Intensity with HDMI out, but won't be suitable for broadcast quality. It will, however, be perfectly fine for seeing what your HD footage looks like on an HD set that most people will have in their homes. So I take back my initial statement and say that if you have a tower, the Intensity and HDTV is your best option...if you aren't needing full broadcast quality. If you just need to see what it looks like.
Shane

I just bought an Epson Stylus Pro 3880 and the printed images look yellow. I calibrate my MacBook Pro monitor with a ColorMunki Display. I want to make sure my Lightroom print settings are correct.

I just bought an Epson Stylus Pro 3880 and the printed images look yellow. I calibrate my MacBook Pro monitor with a ColorMunki Display. I want to make sure my Lightroom print settings are correct.

This what I have been trying...... Maybe my eyes are screwed up or don't understand the process....
What I have been trying to do is squint and make the apple disappear by moving the sliders around in each step. Is that correct?

What is bank key in house bank configuration

hi
what is bank key in house bank configuration. is bank key same as our bank routing number.
thanks,
monica

Hi,
You specify the bank key under which bank data from the respective country is stored.
Basically, your banks are managed by using their bank numbers. The bank number and the bank key are almost same for the house bank.
Like you said, you may define a 9 digit number that serves as a routing number too.
Hope it clears your doubt.
Assign points if helpful.
Regards,
NareN.

What is the best way to monitor taffic across a Campus?

I am trying to find the best way/ways to monitor traffic across a campus network. The two solutions I have thought of are using Netflow or ERSPAN. However, neither are supported by the devices in this network. Here is a quick overview of the network...
Core Switches (3750 Stacks) using Layer 3
|
Distribution Switches (3750 & 3650s) using L3 towards Core and L2 towards Access
|
Access Switches (Mostly 3500s) using L2
What are the best options for monitoring traffic on this type of network? All links between switches are Gig, so we have plenty of bandwidth. I would really like to be able to setup snort/ntop or something similar.
Are there any solutions available that I could use RSPAN and a monitoring computer at the Access Switches and have them report back to a central monitoring machine? I would prefer a centralized solution.
Thanks,
Garrett

Hello Garrett
Each monitoring software has its own limitations/specifications..
If you want to monitor traffic/protocols running on ur network, on a constant basis, you will have to use Netflow.. You can use a simple netflow collector, and collect reports, and analyze the application traffic on your LAN/WAN.. Not sure if this will help too much in troubleshooting, since this will be more used for trending your applications. You can probably discover new applications, which arent used much on your network, using this..
But for real troubleshooting, you will need something like a syslog server.. u can configure logging levels and push important errors/updates from the cisco gear to this box. In case your box goes down, or has issues, system log messages will be dumped to this server and will be a very useful device for troubleshooting... eg, kiwi cat, solarwinds, 3cdaemon, and lots of other freewares...
I would ideally have both these components on my network, for trending and troubleshooting..
apart from this, if you have other advance technology products, like wireless, application accelaration etc, there are other network management solutions available..
Hope this helps.. All the best.. rate replies if found useful
Raj

Monitoring configuration - timeout

Hi. I hope that someone can help !
I have an OEM 10g Grid Control central installation with a firewall between it an a new remote agent (running Midtier/Infra). The firewall between the sites only allows https and the new remote OEM agent has been installed and can be seen from oem. However when I try and change the 'monitoring configuration' for the servers 'targets' list it timesout.
This must relate to http/https - is thgere anyway that I can change the monitoring info ?
Thx if you can help.

For example, when you configure Database Instance target you must have connection to target host by listener port (default 1521).
So you may just see on firewall logs to see what ports blocked by it when you trying configure Mtier/Infra target server.
To correct monitoring not only http/https connection from OEM to Target Agent needed.

Monitoring Configuration bypassing steps 2,3,4

Hi. I've successfully installed and configured Grid Control, Agents and DB Hosts but I've encountered a problem with certain databases.
When I click on 'Monitoring Configuration' there are 5 steps:
Properties ------ Install Packages ----- Credentials ----- Parameters ----- Review
I want to install and configure STATPACKS to check TOP and BAD Sql, but when I click on 'Next' in Step 1/5, it directly goes to 5/5, bypassing the intermediate ones.
The only thing I could find on the net about this issue is that it should happen when configuring Cluster Databases, but this is not the case:
(complete document here: http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e10954/addnl_tasks.htm)
18.5.2 Configuring Cluster Databases
For versions 10.1 and higher, Enterprise Manager bypasses the Install Packages, Credentials, and Parameters steps, and goes directly to the Review page.
I've manually installed STATSPACK but still can't configure it from Grid Control. Any ideas why does this happen?
Thanks

Nevertheless, a bulk loading process is what I really like to have as part of the wizard.
If all of the CSV files are identical:
use the Excel2Collection plugin ( - Process Type Plugin - EXCEL2COLLECTIONS )
create a VIEW on the collection (makes it easier elsewhere)
create a procedure (in a Package) to bulk process it.
The most important thing is to have, somewhere in the Package (ie your code that is not part of APEX), information that clearly states which columns in the Collection map to which columns in the table, view, and the variables (APEX_APPLICATION.g_fxx()) used for Tabular Forms.
MK

What is the difference between Message Monitoring and End-to-End monitoring

Hi experts,what is the difference between Message Monitoring and End-to-End monitoring? and What is the difference between Value Mapping and Fix value?
Thanks,
Manoj

HII
You use message monitoring in the following cases:
● To track the status of messages
● To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
● If you want to monitor message processing steps in a number of SAP components (to be configured).
● If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
also refer this doc...gives more insight on various monitoring:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
... End-to-end monitoring in SAP XI provides a graphical overview of the different XI
components and the message flow between them. It is based on the Process Monitoring Infrastructure (PMI).
ans also
http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
You use message monitoring in the following cases:
1 To track the status of messages
2 To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
1 If you want to monitor message processing steps in a number of SAP components (to be configured).
2 If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
End-to-end monitoring includes message monitoring, adapter monitoring, BPE if BPM is involved.. so end-to-end monitoring tells you complete description of your scenario......but message monitoring is concerned only with source message coming to target message successfully generated.

What are the best apps to monitor tests and emails on childs phone

what are the best apps to monitor tests and emails on childs phone?

You could simply log into your child's email with the password that the two of you agree upon, and monitor the emails manually. As for the texts, you could purchase a separate device, and use the child's Apple ID to monitor the iMessages. For SMS/MMS, no way to monitor it. You'll have to use the app called 'Random Parental Inspections'.

What are the prerequisites to install and configure Oracle Coherence 3.4

What are the prerequisites to install and configure an Oracle Coherence (3.4 Grid version) on RHEL5.0 system?
I want to make an Oracle Coherence Gid Data system for testing purpose using 3 machines.
What kind of network configuration is OK?
What software should be installed in advance？
Thank you

Hi,
I would read through the Testing and Tuning section of the following page.
http://coherence.oracle.com/display/COH34UG/Usage+(Full)
Even though you are not about to go into production I think the Production Checklist has some very useful information.
http://coherence.oracle.com/display/COH34UG/Production+Checklist
-Dave

CCMS Alert Monitor (edit monitor-configuration.xml. ?)

Hi Friends
I'm trying to change the default polling time for the CCMS Alert Monitor, 5 minutes instead of 30 minutes.
In http://help.sap.com/saphelp_nwpi71/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm you can read:
Accuracy
The default polling period for the monitor is 30 minutes. If you want to have shorter polling periods, you can change them in the SAP NetWeaver Administrator as follows:
1. Choose Availability and Performance Management ® Resource Monitoring ® Java System Reports (alias: /nwa/java-sys-reports).
2. Select an arbitrary Number of errors entry in the monitoring tree of the Adapter Engine (leaf node).
3. Choose Configuration in the right-hand pane.
4. Choose Edit in the dialog box that appears.
5. Change the polling period to 5 minutes, for instance.
6. Choose Save and wait until saving is finished (be patient, since this may take a while).
7. Choose Configuration Management ® Infrastructure Management ® Java Configuration Browser.
8. Choose apps ® sap.com ® com.sap.aii.af.app ® Monitoring Configurator ® monitor-configuration.xml.
9. In the xml file, change the polled-by-template period to the same value as above, for example, 5 minutes.
10. Save the modified xml file.
11. Choose Operations Management ® Infrastructure Management ® Start & Stop ® Java EE Services to restart the Monitoring service to apply the changes.
But in step 9, the xml file I've found in my PI 7.1 (SP6) is this:
<monitor-configuration>
<monitor-semantics />
<monitor-tree />
</monitor-configuration>
Also, there is no way to modify that file, you can only display it or download it.
can anyone tell me how to edit the file.
regards
raja

Hi Raja,
This is the same as doing the following:
You can locate the monitor-configuration.xml file in the SDA com.sap.aii.af.app.sda (inside META-INF folder). You can find this SDA in the install directory of PI installation. In this XML file please locate and edit the following tag:
<template-info template-name="SAP_XIJ2EE_RCRDS">
                        <polled-by-template period="30" unit="MINUTE">
                            <generating-resource
                                name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
                            <template-attribute-mapping>
                                <invoked-resource-method name="getMonitoringRecords"/>
                            </template-attribute-mapping>
                        </polled-by-template>
                    </template-info>
Change the above to the following *************
<template-info template-name="SAP_XIJ2EE_RCRDS">
                        <polled-by-template period="5" unit="MINUTE">
                            <generating-resource
                                name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
                            <template-attribute-mapping>
                                <invoked-resource-method name="getMonitoringRecords"/>
                            </template-attribute-mapping>
                        </polled-by-template>
                    </template-info>
The main change is the polled-by-template value from 30 mins to 5 mins as per your req ******
Construct back the SDA (you can search SDN for that) with this edited XML and then redeploy this SDA with the help of JSPM tool.
This will re-start the PI Server for the changes to come into effect.
I hope this helps.
PS: You can consult your BASIS consultant to locate this sda and re-deploy it on PI Server.
Regards, Gaurav.

What is the command to verify the configuration that are not saved or sent to local controllers?

Q: What is the command to verify the configuration that are not saved or sent to local controllers?
A: We can execute the command that is shown in below image to check the status of the configuration that has been made.
Note: For example I made changes to the default VAP profile and executed the command "show master-configpending" which shows the pending configuration to be saved/sent to local controllers.

But that jar file loads without images and icons when it is in other directory.Images should be accessed via a URL rather than using a filename because they will exist as entries in the jar archive not as files. Typically this URL would be obtained by using the Class method [getResource()|http://java.sun.com/javase/6/docs/api/java/lang/Class.html#getResource(java.lang.String)]. There are details in this [Java World article|http://www.javaworld.com/javaworld/javaqa/2002-11/02-qa-1122-resources.html].

What is "Remediate" checkbox under PRO Monitor Configuration

Similar Messages

Maybe you are looking for