What is Report Document Format?

Hi,
I have seen "Report Document Format" in many Oracle Report Developer's job adverts. Following is an example.
"Skills & Experience Required, Oracle Reports Developer - expert level, Report Document Format (RDF) - must have extensive knowledge in this area. Java Development, Working with Oracle Databases and good Communication Skills."
My question is what is "Report Document Format"? I hope it is different from RDF (Report Definition File).
Thanks.

Hi,
It's a bit of personal...
R u sailaja from Hyd Sqlstar Intl...
If so then i am Ravi from the same..Remember(Madhu's batch)..

Similar Messages

  • Report Document Format (RDF)

    Hi,
    I have seen "Expertise in Report Document Format (RDF)" in many Oracle Report Developer's job adverts. Following is an example.
    "Skills & Experience Required, Oracle Reports Developer - expert level, Report Document Format (RDF) - must have extensive knowledge in this area. Java Development, Working with Oracle Databases and good Communication Skills."
    Can somebody tell me what "Report Document Format" is? I hope it is not the file type which is open in Report Developer.
    Thanks.

    Hi,
    It's a bit of personal...
    R u sailaja from Hyd Sqlstar Intl...
    If so then i am Ravi from the same..Remember(Madhu's batch)..

  • HT3350 what can you do when you get this warning? "Scouting Book  Collection Index" could not be handled because Numbers cannot open files in the "Numbers Document" format.

    “Scouting Book  Collection Index” could not be handled because Numbers cannot open files in the “Numbers Document” format.

    This file was created in 2002 in MSword but this had been forgotten.
    When I went to open it.... (MSword) was not a program option on my laptop. For some reason, I assumed that either Pages or Numbers wouild open the file. How the file was created was forgotten and had no file Info, but I new that it was a table of valuable information.
    The warning threw me off, because it led me to believe that it was a Numbers file. which Numbers would not open. A paradox.
    I took the file to a laptop in OSXpanther with MSoffice and it opened in MSword. Problem Solved.
    Thank you for your help.

  • Epson SX218 doesn't print (client-error-document-format-not-supported)

    Hi there,
    I'm currently trying to figure out how to get my Epson Stylus SX 218 to work. Unfortunately, cups (or the printer or whatever causes my problems...) obviously just doesn't want me to get this to work.
    Here's what I've done so far:
    I installed everything as described in the CUPS wiki article (so ghostscript and all the foomatic-stuff is installed, usblp is NOT blacklisted, see why below)
    I installed epson-inkjet-printer-workforce-sx218 from AUR
    I started cups...
    Nothing worked (Printer not recognized, either with or without blacklisted usblp module...)
    I searched the forums for a solution
    I installed cups-usblp and reinstalled all the cups stuff
    Printer got recognized! Yay!
    So, now the printer is set up in cups using the avasys driver. But...
    It doesn't print!
    When I try to print a test page via the cups webinterface it keeps telling me
    Unsupported format "application/vnd.cups-banner".
    The following packages are installed now:
    $ pacman -Qs cups
    local/cups-usblp 1.5.0-1
    local/libcups 1.5.0-1
    $ pacman -Qs foomatic
    local/foomatic-db 1:4.0.7_20110707-1
    local/foomatic-db-engine 1:4.0.7_20110707-1
    local/foomatic-db-nonfree 1:4.0.7_20110707-1
    local/foomatic-filters 1:4.0.7_20110707-1
    $ pacman -Qs epson
    local/epson-inkjet-printer-workforce-320-sx218 1.0.0-6
    $ pacman -Qs ghostscript
    local/ghostscript 9.04-5
    Here's my cups error log:
    I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:18:59:01 +0100] Remote access is disabled.
    D [01/Jan/2012:18:59:01 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:18:59:01 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    I [01/Jan/2012:18:59:01 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:18:59:01 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:18:59:01 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:18:59:01 +0100] Using policy "default" as the default.
    D [01/Jan/2012:18:59:01 +0100] cupsdMarkDirty(---p--)
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
    I [01/Jan/2012:18:59:01 +0100] Partial reload complete.
    I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 on fd 6...
    I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 on fd 8...
    I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock:631 on fd 9...
    I [01/Jan/2012:18:59:01 +0100] Resuming new connection processing...
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:01 +0100] Discarding unused server-restarted event...
    D [01/Jan/2012:18:59:01 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:01 +0100] Report: clients=1
    D [01/Jan/2012:18:59:01 +0100] Report: jobs=0
    D [01/Jan/2012:18:59:01 +0100] Report: jobs-active=0
    D [01/Jan/2012:18:59:01 +0100] Report: printers=0
    D [01/Jan/2012:18:59:01 +0100] Report: printers-implicit=0
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:18:59:01 +0100] PID 928 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:01 +0100] cupsdReadClient: 13 GET /images/wait.gif HTTP/1.1
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:01 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 13 GET /admin/?OP=redirect HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[1] = "OP=redirect"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING=OP=redirect"
    D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 929)
    I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=929)
    D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 13 file=14
    D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost (Domain)
    D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb9359360
    D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] redirecting with prefix http://localhost:631!
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] Script header: Location: http://localhost:631/admin
    D [01/Jan/2012:18:59:06 +0100] Script header:
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 GET /admin HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING="
    D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 930)
    I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=930)
    D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 16 file=17
    D [01/Jan/2012:18:59:06 +0100] PID 929 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb866c360
    D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] No form data, showing main menu...
    D [01/Jan/2012:18:59:06 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: Datei oder Verzeichnis nicht gefunden
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 POST / HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: No authentication data provided.
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 1.1 Get-Subscriptions 1
    D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions ipp://localhost/
    D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
    D [01/Jan/2012:18:59:06 +0100] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] Script header: Content-Type: text/html;charset=utf-8
    D [01/Jan/2012:18:59:06 +0100] Script header:
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] PID 930 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 GET / HTTP/1.1
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 WAITING Closing on EOF
    D [01/Jan/2012:18:59:11 +0100] cupsdCloseClient: 13
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:12 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 13 GET /admin/log/access_log? HTTP/1.1
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    I [01/Jan/2012:18:59:32 +0100] Generating printcap /etc/printcap...
    D [01/Jan/2012:18:59:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 POST / HTTP/1.1
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: No authentication data provided.
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
    D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
    D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username=""
    D [01/Jan/2012:18:59:35 +0100] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
    D [01/Jan/2012:18:59:35 +0100] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 16 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 POST / HTTP/1.1
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: Authorized as root using PeerCred
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 1.1 CUPS-Get-Devices 1
    D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
    D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username="root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[1] = "1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[2] = "0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[3] = "2"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[4] = "2"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[18] = "LANG=en_US.UTF8"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[23] = "REMOTE_ADDR="
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[25] = "SCRIPT_NAME=/"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.5.0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[30] = "REQUEST_METHOD=POST"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[31] = "CONTENT_LENGTH=244"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 948)
    I [01/Jan/2012:18:59:35 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=948)
    D [01/Jan/2012:18:59:35 +0100] cupsdSendCommand: 16 file=14
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 949)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 950)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 951)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 952)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 949 (mdns) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] [CGI] list_devices
    D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_busses=2
    D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_devices=7
    D [01/Jan/2012:18:59:35 +0100] [CGI] libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied.
    D [01/Jan/2012:18:59:35 +0100] [CGI] libusb requires write access to USB device nodes.
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 950 (usb) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "ipps"...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 951 (ipps) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] Script header: Content-Type: application/ipp
    D [01/Jan/2012:18:59:35 +0100] Script header:
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS0?baud=115200"...
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS1?baud=115200"...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 952 (serial) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] PID 948 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:00:23 +0100] Report: clients=1
    D [01/Jan/2012:19:00:23 +0100] Report: jobs=0
    D [01/Jan/2012:19:00:23 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:00:23 +0100] Report: printers=0
    D [01/Jan/2012:19:00:23 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:01:15 +0100] cupsdReadClient: 13 WAITING Closing on EOF
    D [01/Jan/2012:19:01:15 +0100] cupsdCloseClient: 13
    D [01/Jan/2012:19:01:15 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:19:03 +0100] Report: clients=0
    D [01/Jan/2012:19:19:03 +0100] Report: jobs=0
    D [01/Jan/2012:19:19:03 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:19:03 +0100] Report: printers=0
    D [01/Jan/2012:19:19:03 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:22:10 +0100] Report: clients=0
    D [01/Jan/2012:19:22:11 +0100] Report: jobs=0
    D [01/Jan/2012:19:22:11 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:22:11 +0100] Report: printers=0
    D [01/Jan/2012:19:22:11 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:24:21 +0100] Report: clients=0
    D [01/Jan/2012:19:24:21 +0100] Report: jobs=0
    D [01/Jan/2012:19:24:21 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:24:21 +0100] Report: printers=0
    D [01/Jan/2012:19:24:21 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:27:26 +0100] Report: clients=0
    D [01/Jan/2012:19:27:26 +0100] Report: jobs=0
    D [01/Jan/2012:19:27:26 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:27:26 +0100] Report: printers=0
    D [01/Jan/2012:19:27:26 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:37:11 +0100] Report: clients=0
    D [01/Jan/2012:19:37:11 +0100] Report: jobs=0
    D [01/Jan/2012:19:37:11 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:37:11 +0100] Report: printers=0
    D [01/Jan/2012:19:37:11 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-total-bytes=5736
    I [01/Jan/2012:19:37:41 +0100] Scheduler shutting down normally.
    D [01/Jan/2012:19:37:41 +0100] Discarding unused server-stopped event...
    I [01/Jan/2012:19:37:41 +0100] Saving job.cache...
    I [01/Jan/2012:19:38:18 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:19:38:18 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:19:38:18 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:19:38:18 +0100] Remote access is disabled.
    D [01/Jan/2012:19:38:18 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:19:38:18 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups/certs"
    D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups/certs"
    D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [01/Jan/2012:19:38:18 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:19:38:18 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:19:38:18 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:19:38:18 +0100] Using policy "default" as the default.
    I [01/Jan/2012:19:38:18 +0100] Full reload is required.
    I [01/Jan/2012:19:38:19 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [01/Jan/2012:19:38:19 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [01/Jan/2012:19:38:19 +0100] Full reload complete.
    D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [01/Jan/2012:19:38:19 +0100] Removed "/var/spool/cups/tmp/0039f4f0366a5"...
    D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/cache/cups"...
    I [01/Jan/2012:19:38:19 +0100] Listening to [v1.::1]:631 on fd 8...
    I [01/Jan/2012:19:38:19 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [01/Jan/2012:19:38:19 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [01/Jan/2012:19:38:19 +0100] Resuming new connection processing...
    D [01/Jan/2012:19:38:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:38:19 +0100] Discarding unused server-started event...
    D [01/Jan/2012:19:38:20 +0100] Report: clients=0
    D [01/Jan/2012:19:38:20 +0100] Report: jobs=0
    D [01/Jan/2012:19:38:20 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:38:20 +0100] Report: printers=0
    D [01/Jan/2012:19:38:20 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-string-count=289
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-total-bytes=4792
    I [01/Jan/2012:20:53:48 +0100] Scheduler shutting down normally.
    D [01/Jan/2012:20:53:48 +0100] Discarding unused server-stopped event...
    I [01/Jan/2012:20:53:48 +0100] Saving job.cache...
    I [01/Jan/2012:20:54:26 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:20:54:26 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:20:54:26 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:20:54:26 +0100] Remote access is disabled.
    D [01/Jan/2012:20:54:26 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:20:54:26 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups/certs"
    D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups/certs"
    D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [01/Jan/2012:20:54:26 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:20:54:26 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:20:54:26 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:20:54:26 +0100] Using policy "default" as the default.
    I [01/Jan/2012:20:54:26 +0100] Full reload is required.
    I [01/Jan/2012:20:54:27 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [01/Jan/2012:20:54:27 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [01/Jan/2012:20:54:27 +0100] Full reload complete.
    D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/cache/cups"...
    I [01/Jan/2012:20:54:27 +0100] Listening to [v1.::1]:631 on fd 8...
    I [01/Jan/2012:20:54:27 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [01/Jan/2012:20:54:27 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [01/Jan/2012:20:54:27 +0100] Resuming new connection processing...
    D [01/Jan/2012:20:54:27 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:20:54:27 +0100] Discarding unused server-started event...
    D [01/Jan/2012:20:54:28 +0100] Report: clients=0
    D [01/Jan/2012:20:54:28 +0100] Report: jobs=0
    D [01/Jan/2012:20:54:28 +0100] Report: jobs-active=0
    D [01/Jan/2012:20:54:28 +0100] Report: printers=0
    D [01/Jan/2012:20:54:28 +0100] Report: printers-implicit=0
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-string-count=289
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:05:34:23 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:05:34:24 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:05:34:24 +0100] Saving job.cache...
    I [02/Jan/2012:05:35:05 +0100] Listening to [v1.::1]:631 (IPv6)
    I [02/Jan/2012:05:35:05 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [02/Jan/2012:05:35:05 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [02/Jan/2012:05:35:05 +0100] Remote access is disabled.
    D [02/Jan/2012:05:35:05 +0100] Added auto ServerAlias mamapc
    I [02/Jan/2012:05:35:05 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups/certs"
    D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups/certs"
    D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [02/Jan/2012:05:35:05 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [02/Jan/2012:05:35:05 +0100] Configured for up to 100 clients.
    I [02/Jan/2012:05:35:05 +0100] Allowing up to 100 client connections per host.
    I [02/Jan/2012:05:35:05 +0100] Using policy "default" as the default.
    I [02/Jan/2012:05:35:05 +0100] Full reload is required.
    I [02/Jan/2012:05:35:06 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [02/Jan/2012:05:35:06 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [02/Jan/2012:05:35:06 +0100] Full reload complete.
    D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/cache/cups"...
    I [02/Jan/2012:05:35:06 +0100] Listening to [v1.::1]:631 on fd 8...
    I [02/Jan/2012:05:35:06 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [02/Jan/2012:05:35:06 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [02/Jan/2012:05:35:06 +0100] Resuming new connection processing...
    D [02/Jan/2012:05:35:06 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [02/Jan/2012:05:35:06 +0100] Discarding unused server-started event...
    D [02/Jan/2012:05:35:07 +0100] Report: clients=0
    D [02/Jan/2012:05:35:07 +0100] Report: jobs=0
    D [02/Jan/2012:05:35:07 +0100] Report: jobs-active=0
    D [02/Jan/2012:05:35:07 +0100] Report: printers=0
    D [02/Jan/2012:05:35:07 +0100] Report: printers-implicit=0
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-string-count=289
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-alloc-bytes=4648
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:05:56:24 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:05:56:24 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:05:56:24 +0100] Saving job.cache...
    I [02/Jan/2012:17:22:51 +0100] Listening to [v1.::1]:631 (IPv6)
    I [02/Jan/2012:17:22:51 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [02/Jan/2012:17:22:51 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [02/Jan/2012:17:22:51 +0100] Remote access is disabled.
    D [02/Jan/2012:17:22:51 +0100] Added auto ServerAlias mamapc
    I [02/Jan/2012:17:22:51 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups/certs"
    D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups/certs"
    D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [02/Jan/2012:17:22:51 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [02/Jan/2012:17:22:51 +0100] Configured for up to 100 clients.
    I [02/Jan/2012:17:22:51 +0100] Allowing up to 100 client connections per host.
    I [02/Jan/2012:17:22:51 +0100] Using policy "default" as the default.
    I [02/Jan/2012:17:22:51 +0100] Full reload is required.
    I [02/Jan/2012:17:22:52 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [02/Jan/2012:17:22:52 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [02/Jan/2012:17:22:52 +0100] Full reload complete.
    D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/cache/cups"...
    I [02/Jan/2012:17:22:52 +0100] Listening to [v1.::1]:631 on fd 8...
    I [02/Jan/2012:17:22:52 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [02/Jan/2012:17:22:52 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [02/Jan/2012:17:22:52 +0100] Resuming new connection processing...
    D [02/Jan/2012:17:22:52 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [02/Jan/2012:17:22:52 +0100] Discarding unused server-started event...
    D [02/Jan/2012:17:22:53 +0100] Report: clients=0
    D [02/Jan/2012:17:22:53 +0100] Report: jobs=0
    D [02/Jan/2012:17:22:53 +0100] Report: jobs-active=0
    D [02/Jan/2012:17:22:53 +0100] Report: printers=0
    D [02/Jan/2012:17:22:53 +0100] Report: printers-implicit=0
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-string-count=289
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-alloc-bytes=4648
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:18:15:27 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:18:15:27 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:18:15:27 +0100] Saving job.cache...
    E [02/Jan/2012:18:40:40 +0100] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:04 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:44:36 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/Epson-Stylus-SX218) from localhost
    E [02/Jan/2012:18:46:25 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:26 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:56:58 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:01:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:01:49 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:02:06 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:02:57 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:03:42 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:04:46 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:05:17 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:06:12 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:06:57 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:06:58 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:15:57 +0100] Avahi client failed, closing client to allow a clean restart
    W [02/Jan/2012:19:18:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:18:48 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:19:55 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:20:30 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    E [02/Jan/2012:19:24:03 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    Please let me know if you should need other outputs, logfiles, etc. I appreciate any idea that could help me to get this damn thing to finally print something.
    Thank you very much!

    Hi Radhakrishnan,
    ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
    I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
    regards,
    Stewart

  • Error message when I try to print: unsupported document-format"application/vnd.cups-command. I recently had my hard drive replaced in my early 2010 21" iMac. Can anyone help?

    Error message when I try to print: unsupported document-format"application/vnd.cups-command". I recently had my hard drive replaced in  my early 2010 21" iMac. Anyone know anything about this? Thanks in advance.

    What system are you running?  Have you tried going to the Canon website to download and install the latest drivers for that model?
    Are you running Time Machine?

  • What is the best format to use on an external hard drive so I can both back up my Macbook Pro and also put movies on it from another hard drive (PC)?

    I am looking for a solution to whether if it is best to get two hard drives or one that can do two things that I want.
    I am looking for a hard drive format that can both back up my 500GB Macbook Pro but I was also wondering if I could also put movies on it from another hard drive that is PC based. Would partitioning the hard drive work for this? I don't know what are the best formats to use.
    If this is too hard it might just be easier having a separate 500GB hard drive for back up of my Mac and another bigger hard drive for the movies etc (the files are probably bigger than 4GB). Any help would be greatly appreciated as I need to make a decision soon!

    Csound1 wrote:
    Microsoft has not released the official exFAT file system specification, and a restrictive license from Microsoft is required in order to make and distribute exFAT implementations. Microsoft also asserts patents on exFAT which make it impossible to re-implement its functionality in a compatible way without violating a large percentage of them.[13] This renders the implementation, distribution, and use of exFAT as a part of free or open-source operating systems or of commercial software, for which the vendors could not obtain a license from Microsoft, not only technically difficult, but legally impossible in countries that recognize United States software patents.
    Can't help with that, if one is using a Windows machine then they are subjected to their rules and control.
    Limited support outside Windows and Mac OS X operating systems as of 2012, when most consumer electronic devices could only handleFAT12/FAT16/FAT32, rendering exFAT (and flash memory formats using it) impractical as a universal exchange format.
    The OP said they plan to store movies on the external drive.
    Many movies today are well over 4GB in size, thus exFAT has to be used and formatted on the PC, which the Mac can then read.
    Older Windows NT versions up to Windows Vista without Service Pack 1 do not support exFAT.
    Irrelevant, Microsoft provides a free download of exFAT for Windows XP, and Vista shouldn't be running on pre SP1 anyway.
    Some distributions of Linux have begun to include support for exFAT. It is however, only available as a file system in user space, as it's not supported by the kernel.
    Irrelevant, OP is using Windows and OS X, not Linux and if they did Linux can read the files at least and transfer, which is all they care about really.
    Windows Vista is unable to use exFAT drives for ReadyBoost. Windows 7 removes this limitation, enabling ReadyBoost caches larger than 4 GiB.[14]
    Irrelevant, the OP's is intending to use it as transfer drive between Mac's and Windows for movies.
    The standard exFAT implementation only uses a single file allocation table and free space map. FAT file systems instead used alternating tables, as this allowed recovery of the file system if the media was ejected during a write (which occurs frequently in practice with removable media). The optional TexFAT component adds support for additional backup tables and maps, but may not be supported.
    Some relevancy, but only exFAT can handle 4GB+ files between Mac's and PC's, so the need outweighs the possible problem.
    The OP needs to follow the standard Windows practice of "safely removing hardware" before physically disconnecting the external drive. If a write is occurring, it won't allow disconnecting until the write is finished.
    Support for up to 2,796,202 files per subdirectory only.[1][nb 3] Microsoft documents a limit of 65,534 files per sub-directory for their FAT32 implementation, but other operating systems have no special limit for the number of files in a FAT32 directory. FAT32 implementations in other operating systems allow an unlimited number of files up to the number of available clusters (that is, up to 268,304,373 files on volumes without long filenames).[nb 4]
    Not a issue, only in extreme cases of a lot of small files. The OP plans to use it for movies which are usually large and take up a lot of space on the drive.
    IMMO It looks like you just ran off and copied something to argue your point when all the points are basically irrelevant.
    There is only one format that can easily share 4GB sized files between Mac's and PC's without further complications.
    It's ALSO possible to install MacDrive on the PC and format the drive on the Mac HFS+, but I didn't recommend that because I know it's a hassle just like third party NTFS writing software is a hassle on Mac's.
    If you so anti-Microsoft format, then you must know Paragon has to pay a license fee to Microsoft for using the NTFS format.
    At least with exFAT there is no fee to Redmond, at least not yet.

  • CS5 InDesign cannot open files in the InDesign CS5 document format

    I'll be working in InDesign CS5 with no problems then at some point I'll double click on an InDesign file and a window comes up and says - InDesign cannot open files in the InDesign CS5 document format. Sometimes when this happens I have to completely reboot my whole system before I can get InDesign to function correctly. Is this a flaw with CS5? Did not happen with previous versions. It doesn't always happen but I can't figure out what causes it. Would appreciate anyones help. I'm getting to really HATE InDesign!!

    I have not uninstalled and reinstalled, but I did just switch over to another workstation using Time Machine. The previous system was Leopard. This one is running Snow Leopard.
    I'm not sure how to parse this. When you say "switch over to another workstaiton using Time Machine" do you mean, "started using another machine that happens to be using Time Machine for backups and is also running 10.6 instead of 10.5"?
    Or do you mean, "Used the Time Machine program to upgrade from 10.5 to 10.6?" If you mean the second one, well, I can't say I am surprised that things are messed up. And that would make your problem rather different than the other posters, which is good reason for you to have started your own thread (and thus your own solution)....
    I'm a little bit leary of getting in and changing things in Terminal, without understanding what I am changing. Plus this is a workstation at work, so if I screw something up, that is not a good things, and I don't have time to spend a day fixing things back up again, with the way our workload is.
    Well, you can find a lot of marginal documentation about lsregister and Launch Services, but I wonder whether your understood the ramifications of messing with Time Machine (or maybe I have misinterpretted you!). I'd be surprised if you found another way to fix this, other than uninstall/reinstall.
    Good luck.

  • Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

    Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

    Where to begin... and why would you ask here? (workstation owners)
    Places I can think to try, after google of course....
    Forum devoted to something like Word / Mactopia or Pages.... whether you are using Office 2011, and no idea what browser or webmail (IMAP, Gmail, other)
    And then there really are notebook with subforum for MacBook Pro
    Apple Site Map
    Apple Support Mail
    Apple Support

  • Acrobat cannot open files in the "Adobe PDF document" format

    The document “example.pdf” could not be opened. Acrobat cannot open files in the “Adobe PDF document” format.
    Hi All,
    Running Acrobat Pro 9.4.2 on Snow Leopard, have never had this problem before. Showed up about a week ago, I believe with new update. Can't double click on a file in Finder, or drag and drop to AcrobatPro in Dock, but can open from within Acrobat Pro / File / Open command.
    All my preferences are correct with "Open With Acrobat Pro" as the default.
    I've read all the threads I can find with no answers yet.
    Anyone found and answer, I see a lot of us are going through this over the last year.
    Only possible common thread I have found is possibly HP printers. But I've been running HP printers all along with no issues.
    Thanks for you input.

    Moved to Acrobat Installation & Update Issues
    Either Acrobat needs to be re-installed or the file is named as a pdf file, but it is not a pdf file. Try opening the pdf file in a text editor and read off what the first line of the file is.

  • Composer Process Report XML Format

    Hi,
    We generated 'Process Report' -- XML format in Oracle BPM Composer. After generating saved content in a xml file. When tried to open this file, getting error message like not in proper xml format etc., Have we missed any thing in installing or configuring Composer. pleased suggest.
    -- Thanks .... Murthy

    @trevorbutler -  Could you send us what version of Ant you're using and a  sample of how you're using the <junit> Ant task?  Additionally,  can you validate that the example you gave for the JUnit output is from  the <junit> Ant task and not the <junitreport> task?  Could you also let us know which version of JUnit you used with Ant, just in case?
    FWIW - The XML output that you see from running tests in JUnit via the <junit> Ant task is output that has been defined without specification by the folks at Apache Ant.  There has been a lot of discussion on standardizing the output amongst the folks at TestNG, the Maven Surefire plugin and others, but I haven't seen anything standardized come out of that.  Here is a wiki page that has some of that discussion http://wiki.apache.org/ant/Proposals/EnhancedTestReports.  t's also important to note, that the aggregate results of the <junitreport> task contain a slight variation on the output produced by the <junit> task.  Consequently, we have to emulate the lowest common denominator that we know will work with the tools out there that parse the XML output associated with an xUnit framework (e.g. - Ant tasks, CI server, etc).  This being said, we rely on the community to keep us up to date with variations that we may have missed or for which need to update.  It's not so much that we've decided to exclude any particular elements from the output, we just need help fine tuning as time goes on.
    Thanks for the help.
    -Brian

  • What is a "document" in Spotlight?

    I was searching for an old Word document from the Finder and could not locate it. I found the file by date and went back to figure out why I didn't find it the first time. I had put keywords in the search field and added Kind as Document. If I turn that off, it finds the document. With it on, it does not locate it. What is a Document to Spotlight? How else would you specify Word documents if not as Document?

    Apple's definition of a Document in Spotlight is about the most useless thing ever. I don't use it. Technically, "Document" is defined in a search by the Raw Query of "kMDItemContentTypeTree = public.content"--which includes dang near every sort of file--except, evidently, your Word documents (my MSWord docs, created in the Office 2004 version of Word, are included in the Document definition).
    If I were trying to get only MS Word documents, I would use "Kind is Other" and type Word into the blank field. That will cover Word docs created in my version of MS Office, whose kind is defined as "Microsoft Word Document" in their metadata, and will also bring up Word documents going all the way back to Word 97, whose kind is defined as "Word 97 Format (.doc)" in their metadata. I don't have the more recent version of MS Word, but you can check one of your files with GetInfo and see what it says for Kind.
    Francine
    Francine
    Schwieder

  • What is report?

    can any one explain about what is report?how is help full for consultants? what are alternatives in this?how we can use this?

    Reports: Reports consist of data, which is expected to be reveiwed  or checked the transaction taken in said period. Reports are useful for analysis of decision taking for future activities.
    Sone of the standard reports for SD & its configuration guide is as under:
    Standard SAP SD Reports:=
    Statistic Group:
    Purpose – To capture data for Standard Reports, we require to activate Statistic Group as under:
    --> Item category (Configuration)
    --> Sales document type (Configuration)
    --> Customer (Maintain in Master data)
    --> Material (Maintain in Master data)
    When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
    Configuration:
    IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
    1. Maintain Statistics Groups for Customers
    2. Maintain Statistics Groups for Material
    3. Maintain Statistics Groups for Sales Documents
    4. Assign Statistics Groups for Each Sales Document Type
    5. Assign Statistics Groups for each Sales Document Item Type .....
    All Standard Reports which are available are as under:
    SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
    1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
    2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
    3. Sales organization -> Sales organization / Sales office / Sales employee
    4. Shipping point -> Deliveries / Returns
    5. SD documents -> Orders / Deliveries / Billing documents ...
    & so on.
    Some of the Standard reports in SD are:
    Sales summary - VC/2
    Display Customer Hierarchy - VDH2
    Display Condition record report - V/I6
    Pricing Report - V/LD
    Create Net Price List - V_NL
    List customer material info - VD59
    List of sales order - VA05
    List of Billing documents - VF05
    Inquiries list - VA15
    Quotation List - VA25
    Incomplete Sales orders - V.02
    Backorders - V.15
    Outbound Delivery Monitor - VL06o
    Incomplete delivery - V_UC
    Customer Returns-Analysis - MC+A
    Customer Analysis- Sales - MC+E
    Customer Analysis- Cr. Memo - MC+I
    Deliveries-Due list - VL04
    Billing due list - VF04
    Incomplete Billing documents - MCV9
    Customer Analysis-Basic List - MCTA
    Material Analysis(SIS) - MCTC
    Sales org analysis - MCTE
    Sales org analysis-Invoiced sales - MC+2
    Material Analysis-Incoming orders - MC(E
    General- List of Outbound deliveries - VL06f
    Material Returns-Analysis - MC+M
    Material Analysis- Invoiced Sales - MC+Q
    Variant configuration Analysis - MC(B
    Sales org analysis-Incoming orders - MC(I
    Sales org analysis-Returns - MC+Y
    Sales office Analysis- Invoiced Sales - MC-E
    Sales office Analysis- Returns - MC-A
    Shipping point Analysis - MC(U
    Shipping point Analysis-Returns - MC-O
    Blocked orders - V.14
    Order Within time period - SD01
    Duplicate Sales orders in period - SDD1
    Display Delivery Changes - VL22
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • What is Report Painter in Abap ?

    What is Report Painter in Abap ?
    How we can write a simple report through report painter .
    It's Tcode , How to proceed ?
    I developed several report through ABAP , but i have no clue about Report Painter .
    What is advantage to using it .
    Plz give some Example .
    Regards : rajneesh

    Hi rajneesh,
    Report Painter : -
    You use the Report Painter to create reports from data in the Special Purpose Ledger (FI-SL) application component and other R/3 application components to meet your specific reporting requirements.Advantages of the Report Painter include:--Easy and flexible report definitionReport definition without using setsDirect layout controlABAP QueryThe SAP Query application is used to create reports not already contained in the default. It has been designed for users with little or no knowledge of the SAP programming language ABAP.SAP Query offers users a broad range of ways to define reports and create different types of reports such as basic lists, statistics, and ranked lists. ABAP Report--
    A ABAP Report is the one which is used to display the output in the form of list with out any GUI screen.It is less userinteraction. or Reading and displaying data, for example in a list. Obsolete name for an execution program that can only implement reporting
    Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
    Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
    Report Painter fulfills a function similar to Report Writer, but is easier to use. Most of the functions found in Report Writer have been built into Report Painter; however, you do not need to be familiar with all Report Writer concepts (such as Sets) in order to use Report Painter.
    When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
    Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
    To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
    Advantages of Report Painter include:
    Flexible and simple report definition
    Report definition without using sets
    Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
    http://help.sap.com/saphelp_47x200/helpdata/en/56/32e339b62b3011e10000000a11402f/content.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    thanks
    shankar
    reward me if usefull

  • Crystal reports and formatted reporting.

    hi experts,
    i have a clarification about  crystal reports and formatted reporting.in what scenarios they are used..
    points ll be rewarded...
    thanks
    baskar

    Hi ,
    Crystal Reports is a powerful, dynamic, actionable reporting solution that helps you design, explore, visualize, and deliver reports via the web or embedded in enterprise applications. It enables end users to consume reports with stunning visualizations, conduct on-report business modeling, and execute decisions instantly from the report itself—reducing dependency on IT and developers.
    The report can then be previewed on the screen, printed onto paper or exported to one of several different file formats such as PDF, Excel, text or CSV.
    It is also possible to run a Crystal Report without using the full Crystal Reports designer software. These alternate methods for running reports include locally installed viewers, schedulers, and report distribution tools. These are typically third-party software programs (independent of Business Objects) that allow you to open, refresh, preview, print and export an RPT file. In 2007 Business Objects released their own viewer, Crystal Reports Viewer XI, but unlike the independent viewers it does not allow the user to refresh the report, but only to view static data saved in the RPT file.
    Thnx,
    Srinivas

  • What is the IDOCs format

    hi friends,
    what is the IDOCs format?
    where this IDOCs format comes into picture in SAP MDM?
    which systems support this IDOCs format?
    plz help me

    Hi Rao,
    IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system.
    Please have a look on this link for IDoC:
    http://searchsap.techtarget.com/sDefinition/0,,sid21_gci852485,00.html
    1. What is the IDOCs format?
    Ans: XML
    2. Where this IDOCs format comes into picture in SAP MDM?
    Ans: Idoc are used to interchange data from R3 to any external system or vice versa. As MDM stores different masters so that master data can come from an Idoc via Exchange Infrastructure (XI) or through MDM Generic Extractor or directly via an xml and xsd of an Idoc.
    When we use XI or generic extractor in between MDM and R3 then we need to store Idocs scehma in to MDM for Idoc XML.
    3. Which systems support this IDOCs format?
    Ans: R3, XI, and some external third party systems support Idocs. Even MDM support Idoc XSD and XML.
    Rewards if useful.
    BR,
    Alok Sharma

Maybe you are looking for

  • Cannot connect to server on IPad for yahoo mail

    I can't seem to be able to access my Yahoo mail from my IPad 3 anymore. Any ideas as to what's causing this? I have wifi through a Verizon wireless router and then I have a range extender as well but when I'm in the house I use the Verizon user name

  • Why does my iPad store show wrong id

    In my settings, it shows the right Id.  When I go into store to get items or updates, it shows wrong id.   How do I fix this?

  • Frame freezes for no reason

    Hi, This must be a windows or java bug. My application works fine, but from time to time when I open a AWT FRAME it FREEZES... (not the application but the frame) I cannot click anywhere with the mouse, i cannot close it, and it does not show up in t

  • Bits and Byte Manipulation

    Hi, Can anyone help? I have and array of 4 bytes - hostIP[]. 01000010 11110001 11011000 00011010 [Just for info, they come from InetAddress.getByName(host).getAddress()]. I tried to hook them all together into a 32-bit int with this code: byte[] host

  • I get mesage that lightening 3.3 is not compatible with firefox 31.0

    I have a new computer and installed the latest version of Mozilla Thunderbird on it (firefox 31.0). I like to use the calendar and tried to install lightening 3.3 but it gives the message that it is incompatible with firefox 31.0. How can I get the c