What is required in order to use ALEAUDIT for Idocs?

Hi Friends
What is required in order to use ALEAUDIT for Idocs?
Regards
Sam

Hi Samuel,
Check out this blog..
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Hope this will help.
Let us know if you need more details.
Nilesh

Similar Messages

What additional software is required in order to use adobe sdk?

what additional software is required in order to use adobe sdk?
thanks,
Chub

Definately you need development environment
More details you can find in Acrobar SDK documentation
http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/Overview_GettingStarted.3.6. html
Regards
Bartek

IPad Mini keep prompting activation required in order to use.

iPad Mini keep prompting activation required in order to use, and occasionally will be activation failed. The problem is known after upgrading to iOS8.1. Previously, When I was using iOS7.1 It doesn't prompt for activation.

To add on, I brought over from a guy.

Using ALEAUD for application reply? or build a new IDOC ?

Hello.
I have a scenario where a 3rd party sends me a message, that I map in my PI to an ACC_DOCUMENT IDOC.
I need to send a reply on the ACC_DOCUMENT IDOC after processing it.
The reply must contain several applicative values from the IDOC - so that the 3rd party will be able to
"understand" on what message it receives the reply.
Should I use ALEAUD in this case? I'll have to add an extension so that it will contain the applicative values.
Or should I build a new IDOC or ABAP proxy to send the reply back? will I be able to generate it when I process the IDOC?
Anyone has a Rule of thumb on this matter?
Thanks in advance,
Imanuel Rahamim.

Hi,
If you want to give the application response with minimal effor, you might want to change the ACC_DOCUMENT IDoc used so far to calling BAPI_ACC_DOCUMENT_POST. Actually, their data structures are identical, because ACC_DOCUMENT is an ALE interface generated for this BAPI. Thanks to this, you will immediately receive application response from your ECC system, including information like document number of the document posted, and similar.
Alternatively, if you do not want to use synchronous scenario, I recommend developing a custom ABAP Proxy that you will use to pass posting information from ECC to PI to your 3rd party system. You can call this Proxy after each IDoc is posted, or on a regular basis to collect multiple postings information into a single call. I think this will be easier to do it from scratch than to enhance ALEAUD message.
Or you can go one step further and configure FIDCC2 IDoc distribution to have the financial postings automatically sent from ECC to PI to 3rd party, immediately after the posting document is created. It is up to you to decide, based on the actual requirements and possibilities of the 3rd party system.
Hope you'll find this useful,
Greg

What's the proper order of installation/uninstallation for upgrading Elements 12 to 13

I'm upgrading to PE 13 specifically because it's been made Retina-capable. Otherwise, I'd wait 3 versions between upgrades. I'm in the peculiar position of having to upgrade PE 12 on a Mac that's just had it's apps and data/documents moved from another Mac on which PE 12 was originally installed.
In the past, especially when migrating from one computer to another, I've ended up with files and photos that need to be "reconnected" all the time, presumably because the catalog is using the file paths from the old computer when the path to those photos in the restored catalog on the new computer is different at some point. With my last migration from one Mac to another, the catalog opened just fine. I could see all my photos, but just about all of them from the last 12 years needed to be reconnected before I could backup the catalog. It was impossible, so I went back to the prior computer to make the backup I'll use for PE 13. I'd really like to avoid everything being "disconnected" this time.
My question is how to upgrade. I made a backup of the PE 12 catalog, and I'll open that in PS 13. But should I UNinstall PE12 before I install PE 13 or after I install PE13?
Should I direct PE 13 to place its catalog in the same folder that PE12 used or a different one? If the same, should I delete that catalog folder and its contents to allow PE 13 to make its own catalog folder?
When the program is restoring from the PE 12 backup and asks if I want to maintain the same directory structure as the catalog had, what's the best option???
I think that anyone using PE for several years will have had to migrate from one computer to another a few times, so my problems probably aren't unique. I'd sure appreciate tips on how to do it better.

OK, no further help needed, but I do have questions. I still have no idea why I couldn't restore from a backup of a PE 12 catalog, but I could not. I found that those backups did not contain a file named PSE12cat.db, but I still don't understand what was going wrong.
FINALLY, from the unconverted PE 12 catalog that was already on my new computer, but NOT in the location I wanted to use, I happened on a subfolder that did contain a .db file. It did successfully convert then, and I'm back in business with my Retina-enabled (yay!!) PE 13.
I'm sure that that conversion was difficult because of extraneous folders that resulted from so many upgrades and computer migrations over the years. That's why I wanted to start fresh and let PE 13 create its own folder structure which would be rational from here on. I just couldn't find a way to do that, but perhaps this current Catalog actually is unencumbered by bad path names for the individual files because it did create a successful backup, albeit it very, very slowly compared to the rate at which PE 12 and prior versions created backup. But this backup, also, contains no .db file.
1 -- Why wouldn't PE 13 convert the Catalog backups from PE 12
2 -- Why would PE 13 claim that backups were "not valid" when PE 12 validated the Catalogs and reported successful completion of its Catalog backup?

Create Sales Order Iview Using WD for Java

Dear Friends,
I have been assigned some task that is "<b>Create Sales order iview using web dynpro for java".</b>
I am new in this field, please help me out that from where i should start working on this.
please forward me some documents in this regrads.
Thanks & regards,
Iqbal Ahmd

Hi Iqbal,
If you are connecting to SAP system as backend then you can proceed creating a webdynpro application using the Adaptive RFC model from where you can call your BAPI's this webdynpro applications can be integrated on to the Enterprise Portal using the webdynpro iviews.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/wd%20tutorials/creating%20a%20web%20dynpro%20application%20accessing%20abap%20functions.pdf
Go through the following links and tutorials
http://help.sap.com/saphelp_nw04/helpdata/en/15/0d4f21c17c8044af4868130e9fea07/content.htm
Tutorials & Samples for Web Dynpro Java [original link is broken]
Hope it helps you
regards
ambicasony

Parts Requirement Create Order Error:Validation Failed for the field - Shipping Method DHL

Trying to create Parts Requirement.
Error message on clicking "Create Order" button: "Validation Failed for the field - Shipping Method DHL"
Please suggest the Setup that needs to be done for this.

Kinck
The same script worked for me in vision (R12.1). You may have issues with your defaulting of a number of attributes that you are not passing in the API (like price list, line type and so on). You may want to check them.
Thanks
Nagamohan

What is required in order to download "streaming" flash video from all websites?

I have tried many flash download Add-ons that work for a few websites but they do not work on all websites.
My goal is: If I can see the video on a website I would like to have the option to capture it.
I would appreciate any and all advice concerning this,
Thank you, David

It is usually not possible to save media content that is streamed as there is no real file involved.<br />
You can only do that if a file is downloaded and possibly buffered.<br />
If the player uses a secure connection then it is not possible at all to intercept and save that content.

Do I need to keep the Capsule plugged in to my cable modem in order to use it for backup?

The location of my cable modem is really inconvenient. I'd like to move the Capsule to a different room. Do I need to keep it connected to the cable modem in order to be able to use it as my Time Machine backup device?

I assume your cable modem is a router.. as such the TC should be wired to it in bridge. It will not do anything worse than now for the network in the house.. and the TC can then be accessed as per normal.
TC is designed to be plugged into the modem or main router by ethernet.
You can move it anywhere you like in the house as long as you have ethernet connection back to the modem.
You can run the TC by wireless .. it will have the following effects.
1. Super slow backups. It will simply reduce the current wireless speed by half or more for backups.
2. Since there is no QoS your internet will stop during backups. Or near to.
3. You will affect all wireless clients during the backups.
It can work, if your backups are very small.. but the TC becomes a near to useless dumb client in the network.. ethernet ports are off, wireless becomes mere client.. so you cannot even connect directly to it.
If you try the TC in stand alone.. ie a secondary network.. that can work.
1. The computer will then have backups or internet not both. You will need to deliberately connect to the TC to get backups working. That is assuming you use wireless.
2. You can do it with ethernet. and have internet by wireless. but the setup is tricky.. tell us if you want to proceed this way.
3. The problem is, the TC now becomes useless to the whole network and is only used by one computer. You may as well have bought a cheap USB drive, which is more reliable and faster.

What is required userexit or badi or enhacement for material number ??

HI Sir,
Issue,
In MM01 TCODE
when we are entering the material number   it should be the 12digit otherwise it has to give the error message.
so plz help what is the exact exit and the code .
thanks and regards
syed

Hi,
    Check these BADI's
WRF_DISCONT_PARAMS_I                    BAdI: Parameters in Fashion Discontinuation
WRF_DISCONT_FACT_E                      BAdI: Follow-Up Actions in Discontinuation
WRF_DISCONT_CHECKS_I                    BAdI: Scope of Check in Material Reorganization
MG_MASS_NEWSEG                          User-Specific Fields & Segments in Mass Maintenance
MATGRP_SKU_UPD                          BAdI for Article Hierarchy Connection
CDT_CHECK_MATERIAL                      Checks for Existence of a Material in a CDT
BADI_MM_MATNR                           Modification-Free Archiving Enhancement of MM_MATNR
BADI_MATNR_CHECK_PVS                    Check Material for Use in iPPE
BADI_MATERIAL_REF                       Addition of customer-defined default data for material
BADI_MATERIAL_OD                        Integration of New Objects in Material or Article Master
BADI_MATERIAL_CHECK                     Enhanced Checks for Material Master Tables
BADI_GTIN_VARIANT                       User Exit for Customer-Specific GTIN Variant Check
BADI_EAN_SYSTEMATIC                     BAdI for Internal Control of EAN Logic
Regards,
Srini.

What is WLAN connectivity, how to use it for inter...

hi all
i have nokia n79, i have know about WLAN connectivity, i mean how to use it. i just check it in my office it shows WLAN network found, i opend it and select start web browsing, then it asked select WLAN network there it already shows hidden WLAN, then i connected it through hidden WLAN then it asked WLAN network name, what is WLAN network name and how to use WLAN network for internet browsing. pls suggest me
thanks/regards
Chandrakant Rajolkar

This will get you started.
http://en.wikipedia.org/wiki/Wireless_LAN
Check your user manual.
http://europe.nokia.com/get-support-and-software/product-support/nokia-n79/guides
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

What are the benefits/limitations in using iPad for sales people?

I've been wanting to know if I could use the iPad to do my sales job instead of having to carry around a Windows laptop. I would obviously still have the laptop and prob would create Powerpoint presentations, Word and Excel docs, but the main use would be Powerpoint and web.
Anyone have any real experience they can share?
Thanks!!

I've used it to display my photographic skills. I've found that it's much less "intrusive" on the potential client.

Settings for Purchase Order output using services for MM-SUS scenario?

Dear Gurus,
I am configuring the service procurement classic and plan driven procurement for MM-SUS
environment. We are on SAP SRM 7.01/ECC 6 EHP5.
I need to maintain the below settings for PO output:
1. RUN transaction SWETYPV
2. IN the object types field, enter CL_SE_PUR_WF_OUT.
3. In the event field, enter CREATED.
4. In the receiver type field, enter WS53800008.
5. In the receiver function module field, enter SWW_WI_CREATE_VIA_EVENT_IBF.
6. Select the 'Linkage Activated' checkbox.
7. Save your entries.
Similarly, one more entry for the event CHANGED.
However, the system is not allowing me to save the settings.
If I choose BOR Object Type 'CL_SE_PUR_WF_OUT', it gives an error message 'Object type CL_SE_PUR_WF_OUT is not defined'.
If I choose object category 'Business class for object type CL_SE_PUR_WF_OUT, it gives an error message 'Class CL_SE_PUR_WF_OUT is not a business class.'
There are similar entries in the table SWETYPV for object type CL_SE_PUR_PO_WF_OUT' with object category CL.If we copy the entries and tries to replace the
object type 'CL_SE_PUR_PO_WF_OUT' with CL_SE_PUR_WF_OUT and save it, it gives an error message 'CL is not used for workflow event'.
Could you please help me on how to configure the settings for PO output from ECC system using services?
Any input is highly appreciated.
Thanks and regards,
Ranjan

Hi Ranjan,
Please add the value 'CL' in the table SWF_CATIDS
Then it will work.
With Regards,
Malay

Do I have to buy an upgrade for my GB '09 in order to use it?

Do I have to buy an upgrade for my GB '09 in order to use it?

karenfromagua dulce wrote:
Do I have to buy an upgrade for my GB '09 in order to use it?
in order to use it for what?

Ny ipod nano doesn't have a run screen on the fitness setting...and I want to use it for my workouts. Help!

I bought my ipod nano today and I downloaded the user manual. It says that in order to use it for workouts all I need to do is calibrate it for height and weight...however, there is only a pedometer setting and no run setting. Why is this? Can anyone help??

Connect your Nano to iTunes, click the update button on the summary screen. Once that is done, you will get what you expect.
i

What is required in order to use ALEAUDIT for Idocs?

Similar Messages

Maybe you are looking for