What is required to connect Coldfusion to Flex?

I have CFMX7 installed on a 2003 server. I'm trying to
connect via Flex Builder but I'm having some issues. I read that a
J2EE installtion of CFMX is required. Do I also need JRUN? Do I
need to reinstall CFMX in order to get it to work with Flex?

According to the "about this mac" it shows a Model Identifier: iMac7,1, processor Speed: 2.4GHZ and it is a dual processor.

Similar Messages

Novice to wifi - what is required to connect to Internet?

I am thinking about buying an ITouch and don't know much about wireless. I live in an area where I have to use wireless broadband or dial up to get to the internet so am not too familiar with it.
- Do I need some type of ISP to connect the internet on the ITouch?
- I use an IMAC. Do I need to set up a wireless network at home to use the ITouch with it?
- What else do I need to know? I looked for apple information on this topic but couldn't find it.
- I want to know this before I go to the Apple store because the people there generally don't know anything. When I ask them questions they usually say something like "it's automatic", "It's seamless" and it never is.

At home you would need to set up a wireless router to your ISP. On the road you would access using a open public access point. These can be found at coffee shops, Airports etc. Usually coffee shops that have them will give you an access password if needed.
If you have troubles, try using this...
http://docs.info.apple.com/article.html?artnum=305715

What is required to connect an iMac to the HDMI port on a TV?

I am trying to discover what I would need by which to connect my iMac 20" to a 42" HDTV with HDMI port. So far I have not found anything in the manual that tell what is needed, that all just state it can be done.
Sparkgapper

According to the "about this mac" it shows a Model Identifier: iMac7,1, processor Speed: 2.4GHZ and it is a dual processor.

What setup required to connect SAP from Laptop

Hi All,
I have installed SAP-GUI from my laptop I have added my Servers in to the logon pad after that i connected my system remotely. Once its connected thru remotely after that we will work SAP, this is normal setup we are following. But am not able to connect my server from my laptop.
So what are points i need todo for geting SAP to connect the servers?. I have added the logon.ini file into proper location.
Kindly explain.
Anandhan

Hi,
Remote connection from PC or laptop to server must use citrix or terminal service. You can also use VPN to access the citrix server. In the VPN, you can use forticlient SSL VPN :
http://portal.modeldriven.org/sites/default/files/SSL_VPN_Client_User_Guide.pdf
You must install ica client in your laptop before running the B1 from citrix. make sure that the user code to run B1 in the citrix must be registered in the citrix
JimM

What is required to connect T420s DisplayPort to DVI-D port? (Sony Trinitron)

Hello.
My wife and I have recently been watching Netflix movies on our laptop when it occurred to me: why don't we watch this on our 36" screen? So I went out and purchased a DisplayPort to DVI-D cable. Hooked it all up, selected the appropriate input on the TV and... nothing.
I know that I need to choose the appropriate refresh rate and resolution. My questions are:
- Is there anything else that I am missing?
- The NVidia Control Panel is not as intuitive as it could be. How do I configure NVidia/Windows to enable the DisplayPort?
Any feedback you can provide would be greatly appreciated.
CONTEXT
- Laptop: T420s
- Cable: DisplayPort to DVI-D (passive)
- Operating System: Windows 7 (64 bit)
- graphics chipsets: integrated INTEL chip, and discrete Nvidia NVS 4200M Optimus

Hi Gamloi7.
Thank you for taking the time to reply to my posting.
Config=>Display=>Graphics Card=Nvidia NVS 4200M
The T420s laptop has both an integrated GPU and a dedicated GPU. I have tried using driving the display monitor using both... unfortunately it doesn't work. All I see on the TV screen is black.
TESTS PERFORMED
- I have tried: Laptop (DisplayPort) >> to >> TV (DVI-D)... TV only displays a black screen
- I have tried: Laptop (VGA) >> to >> TV (DVI-D)... TV only displays a black screen
ADDITIONAL NOTES
- Yes I have extended the desktop (via the Win+P shortcut).
- For both test cases above, I disconnected the cable from the TV and connected it to my monitor to ensure that the signal was working... sure enough the monitor worked as expected
- as I understand it the Sony Trinitron KV-36HS500 supports: 480p, 1080i, 720p
- The following schematic is for the back of my TV. Do you happen to know if VGA or DisplayPort are compatible with any other standards? For example... I don't suppose I can go from VGA or DisplayPort to S-Video ??

What are the Trading Card Games for iPod touch that doesn't requires Internet connection?

What are the Trading Card Games for iPod touch that doesn't requires Internet connection? Suggestions, please.

Why not look at the apps and fine out?
The odds of someone here knowing that are slim to none.

What is Required for Distribution of Desktop App

Hi,
I'm trying to figure out what is required to distribute JMF. I don't want to make users install an executable, I just want to include required JARS/data files/libraries for a streaming webcam (no audio). (I have read the README and searched all over online, but I'm still not sure)
I create my app, and I have customizer.jar, jmf.jar, jmf.properties, mediaplayer.jar, multiplayer.jar, sound.jar in the lib folder. Although I only need the jmf.jar, and possibly the jmf.properties? I am using NetBeans.
Anyways, I still can't get it to work on another WinXP computer. If I disconnect my camera on my computer, the app still knows what type of device camera it is looking for (vfw:Microsoft WDM Image Capture (Win32):0), but when I trying to run it on another computer with or without the camera connected , it doesn't seem to know because no devices print out when I print the list.
Thanks for your time, I am out of ideas.
J

806359 wrote:
Captfoss,
Do you know where I can find a programmer's guide that explains the Dll's that I need to include for JMF distribution without the installer? I can't find documentation anywhere. The Windows delivery doesn't seem to include any, so I guess they are only installed with the executable installer?AFAIK, there isn't one...
Or better yet, do you know much about DirectShow? or can you point me to a nice replacement to JMF, possibly one that has some JNI included? I just want a lightweight simple video framecapture support on Windows 7. ( I have read that JMF might not work on Windows 7 anyways) I can't believe I haven't found anything good online yet, maybe I am looking in all the wrong places.Adobe Flex and Silverlight 4 are probably the most commonly used "new" technologies for dealing with AV data... You can use C/C++/C# to use some native AV libraries, but as far as using Java, there really isn't much support for video because you really need lower-level access than Java provides to take advantage of things like hardware acceleration and such...
So all of the Java APIs (JMF, FMJ, Quicktime for Java, etc) are essentially Java wrappers for native code... so those are the 3 things I'm aware of that do AV in Java...

What is required in the HOST and QUEUE field when ...

Hi
When setting up my printer, i fill the options identical to what follows:
PRINTER: SAMSUNG HOME
DRIVER:    GENERAL
BEARER: LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
The following fields appear once LPR is selected:
ACCES POINT : HOME
HOST:              WHAT COMES HERE?
USER:              SKY00BER
QUEUE:            WHAT COMES HERE?
ORIENTATION: PORTRAIT
PAPER SIZE: A4
if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
please do correct me if there has to be changes to the BEARER or anything else.
i could really use some help.
thanks in advanced.

sky00ber wrote:
Hi,
What is required in the HOST and QUEUE field when setting a WIFI printer?
When setting up my printer, i fill the options identical to what follows:
PRINTER: SAMSUNG HOME
DRIVER:    GENERAL
BEARER: LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
The following fields appear once LPR is selected:
ACCES POINT : HOME
HOST:              WHAT COMES HERE?
USER:              SKY00BER
QUEUE:            WHAT COMES HERE?
ORIENTATION: PORTRAIT
PAPER SIZE: A4
if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
please do correct me if there has to be changes to the BEARER or anything else.
HELP URGENTLY NEEDED!
I'm not sure but I give it a try.Turn your security(WPA/WEP) and Firewall temporarely off. HOST is the IP address of the printer. QUEUE can be YES or a specific amount of prints, like 1,2,3......
If I look at the manual of your printer I see that you can find the IP and MAC addresses in the Network Configuration Report.I don't know what the USER is doing there because if there is a user then there must be a password.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

'Using ColdFusion with Flex – sample does not work

Hi, I am having problems with Tom Jordahl's article on 'Using
ColdFusion with Flex – Part 1: Creating and running a contact
manager application' found on link '
http://www.adobe.com/devnet/flex/articles/coldfusionflex_part1_02.html'
I do not understand his instruction. In step 4, it states:
"Copy the channel definition from the example Flex
configuration files found in resources/config (default location:
C:\fds2\resources\config\). "
In that folder, I have the following files:
data-management-config.xml, messaging-config.xml, proxy-config.xml,
remoting-config.xml. So which file in this folder am I supposed to
copy from. And where am I supposed to paste it to? Is it into
WEB-INF/services-config.xml file ?
When I ran the test,
http://localhost:8700/samples/dataservice/cfcontact/contactmgr.mxml,
I get the following errors:
4 Errors found.
Error /dataservice/cfcontact/contactmgr.mxml:31
Definition samples.contact could not be found.
30: import mx.rpc.events.*;
31: import samples.contact.*;
32:
I am very new at Flex and trying hard to understand this sw.
Can someone pse help. Thanks a million.

What he means is to copy the channel section from the
C:\fds2\resources\config\services-config.xml file:

<channel-definition id="cf-dataservice-rtmp"
class="mx.messaging.channels.RTMPChannel">
<endpoint uri="rtmp://{server.name}:2048"
class="flex.messaging.endpoints.RTMPEndpoint"/>
<properties>
<idle-timeout-minutes>20</idle-timeout-minutes>
<serialization>

<instantiate-types>false</instantiate-types>
</serialization>
</properties>
</channel-definition>

<channel-definition id="cf-polling-amf"
class="mx.messaging.channels.AMFChannel">
<endpoint
uri="
http://{server.name}:{server.port}/{context.root}/messagebroker/cfamfpolling"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<serialization>

<instantiate-types>false</instantiate-types>
</serialization>
<polling-enabled>true</polling-enabled>
<polling-interval-seconds>8</polling-interval-seconds>
</properties>
</channel-definition>
To the file
C:\fds2\jrun4\servers\default\samples\WEB-INF\flex\services-config.xml.
The resources directory contains just templates for
development, the samples
directory is a fully-deployed flex app.
Jorge Hernandez
"watsonValu" <[email protected]> wrote in
message
news:[email protected]...
> Hi, I am having problems with Tom Jordahl's article on
'Using ColdFusion
> with
> Flex ? Part 1: Creating and running a contact manager
application' found
> on
> link
> '
http://www.adobe.com/devnet/flex/articles/coldfusionflex_part1_02.html'
> I do not understand his instruction. In step 4, it
states:
> "Copy the channel definition from the example Flex
configuration files
> found
> in resources/config (default location:
C:\fds2\resources\config\). "
> In that folder, I have the following files:
data-management-config.xml,
> messaging-config.xml, proxy-config.xml,
remoting-config.xml. So which file
> in
> this folder am I supposed to copy from. And where am I
supposed to paste
> it to?
> Is it into WEB-INF/services-config.xml file ?
> When I ran the test,
>
http://localhost:8700/samples/dataservice/cfcontact/contactmgr.mxml,
I get
> the
> following errors:
> 4 Errors found.
> Error /dataservice/cfcontact/contactmgr.mxml:31
> Definition samples.contact could not be found.
> 30: import mx.rpc.events.*;
> 31: import samples.contact.*;
> 32:
>
> I am very new at Flex and trying hard to understand this
sw. Can someone
> pse
> help. Thanks a million.
>
>

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go? Also, are there any compatiility issues with newer models and G5/G4s?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
Some telltale signs that an AirPort has (or is about to fail):
Status lights are not illuminated or do not match any of the known configurations.
Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
Unit refuses to intialize, even after performing multiple "factory default" resets.
Weak or no wireless signal.
Ethernet port(s) not functioning
Etc.
Also, are there any compatiility issues with newer models and G5/G4s?
Three potential issues:
Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

What is the best Connection option from WebSphere to Weblogic?

What is the best Connection option from WebSphere to Weblogic?
          We are trying to send XML messages from Websphere to WLS to active some
          services....
          any pointers, suggestions?
          Thx
          VJ


Hi,
One of my clients has an environment similar to yours with an internal pair of F5s and a pair used for the access from the internet.
I am only going to focus on the method using an F5 Load Balancer and SSL Offloading. the setup of the F5 will not be covered in detail but a reference to the documentation to support SharePoint and SSL Offloading will be provided
Since you arte going to be using SSL Offloading you do not need to extend your WebApps to use separate IIS WebSites with Unique IP Addresses
Configure the F5 with SSL Offloading
Configure a Internal AAM for SSL (HTTPS) for each WebApp that maps to the Public HTTP FQDN AAM Setting for each WebApp
Our environment has an additional component we require RSA Authentication for all internet facing Sites. So we have the extra step of extending the WebApp to a separate IIS WebSite and configuring RSA for each extended WebSite.Reference:
Reference SharePoint F5 Configuration:
http://www.f5.com/featured/video/ssl-offloading/
-Ivan

Windows Intune Subsription Problem - Configuration required to connect to Windows Intune Service

Hi,
Has anyone come across this description message before : Configuration required to connect to Windows Intune Service?
I've added an Intune Service to my Site, but I've got the above message.
I'm not exactly sure what it means.
Can someone help.
Maybe I've not done something that I need too.
Thanks

Windows Intune Service is a component of SCCM. If you have not added Windows Intune Subscription, the component will not be installed. Check the Component Status in Monitor Node.
Sitecomp.log is a log that records the installation activities.
Juke Chou
TechNet Community Support

User privilege required to connect to OLAP Server

What are the user priviledge required to connect to OLAP Server? Eg OLAPDBA user connectd perfectly thrugh the Java Program for Sales History. But the Sales History User ( SH ) cannot connect to the Server and generates a RemoteAuthentication Exception. I tried giving those privilege and roles as that of OLAPDBA but no success.
Can anyone please help me out in this.
Regards,
Prachi Nadgouda

In the OLAP Users Guide 9.2.0.2, it states to connect to the database using the OLAP API, users must have the following access rights to the database:
CONNECT role
QUERY REWRITE system privilege
SELECT privileges on the database objects containing the data to be analyzed

I am connected to my usual wifi and when I try to go onto any apps which require internet connection, it says I have no internet connection yet I am connected to wifi, how do I resolve this?

I am connected to my usual wifi and when I try to go onto any app's which require Internet connection, it says I have no Internet connection yet I am connected to wifi, how do I resolve this?I have had this problem for about a week.
Any responses are appriciated

You posted in the iPad forum, but you profile lists an iPhone 4S. Does your iPhone or iPad have this problem.
Here's some iPad suggestions. Most also apply to the iPhone. Your iPhone or iPad may show the wifi symbol but that only shows the presence of a wifi signal. Not that you are connected.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

What are required to send message to MQseries server

Hi,
What are required to send a message to MQseries server through JMS . Is JNDI lookup is necessary for this.
thanks in advance,
akmal

you need a small VM, 2-4GB RAM that's internet facing in order to host RDWeb role which runs on IIS. users connect to the web page portal and login, and can launch an RDP session to whatever VMs you have. this requires you to obtain RD CALs.
you can also go with the RDGateway route but it's somewhat more complicated, requiring certificates.
in either case, you need a server with specific port forwarding to the internet through whatever firewall/proxy you have and licensing to go along with it.
it's much easier to just setup a VPN in my opinion.

What is required to connect Coldfusion to Flex?

Similar Messages

Maybe you are looking for