What is row format in SAP B1

What is difference between row format and table format in form setting of SAP B1. What is the use of Row format.
Thanks
Arpit

Hi Arpit,
Table format specifies the visible/active columns that you see in the grid. If you click the gray row# column for any row in the grid, you will see a row details form. The row format setting specifies the visible/active columns in this form.
Henry

Similar Messages

What is the differenec between 'sap list viewer' and 'abap list viewer'

hi
what is the differenec between 'sap list viewer' and 'abap list viewer'

Hi,
There is no difference between them.SAP List Viewer (ALV) is the new name of the ABAP List Viewer (ALV).
The SAP List Viewer unifies and simplifies the use of lists in the R/3 System. A uniform user interface and list format is available for all lists. This prevents redundant functions.
The SAP List Viewer can be used to view both single-level lists and multilevel sequential lists.
Single-level lists contain any number of lines that have no hierarchical relationship to each other.
Multilevel sequential lists consist of any number of lines that have two hierarchical levels. Multilevel lists have header rows and item rows; the item rows are subordinate to the header rows. For each header row there can be any number of subordinate item rows.
You can view subtotals and totals rows in both single-level lists and multilevel sequential lists
From End User Point it is SAP LIST viewer , From Developer Point of View it is ALV .
Check the Below Link
http://help.sap.com/saphelp_nw04/helpdata/en/66/bc7aab43c211d182b30000e829fbfe/frameset.htm
Regards,
Satish

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

Creating DataSources for File Source Systems in csv format in sap bw 7.0

Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AM

Step 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM      IO_MATNAME
MAT001     TEA
MAT002     COFFEE
MAT003     SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!!

What are mapping rules in sap xi/pi ?

hi experts
what are mapping rules in sap xi/pi ? how we can use this rules for special charters mapping .

>
praveen.tecnics wrote:
> hi experts
>
> what are mapping rules in sap xi/pi ? how we can use this rules for special charters mapping .
to map special characters you need to use an element called CDATA in your mapping
a special character causes an error....as XI wont be able to read it (as it is not in a proper XML format)...so to parse this character through XI without causing an eror use the CDATA....just make a search on SDN and you will find the proper use of it....
For your info: http://www.w3schools.com/XML/xml_cdata.asp
Regards,
Abhishek.
Edited by: abhishek salvi on May 20, 2009 8:52 AM

What is unicode check in sap?

what is unicode check in sap?

Hi
http://help.sap.com/saphelp_nw2004s/helpdata/en/79/c55458b3dc11d5993800508b6b8b11/content.htm
Check for the following errors
object must be a character type data object
In Unicode, the addition IN BYTE/CHARACTER MODE must be specified
The access and storage modes ACCESS and MODE must be specified
var1 and var2 are not mutually convertible. In Unicode programs must have the same type/structure
TRANSLATECODE PAGE/NUMBER FORMAT not allowed
The data type/structure objetcs in 'ADD' statement should have same type
The data type/structure "&1" and "&2" are should have same type
IN TEXT MODE the addition ENCODING must be specified
Structures "&1" and "&2" are not mutually convertible.
The ENCODING addition is not valid in BINARY mode
The IGNORING CONVERSION ERRORS addition is not valid in BINARY mode
The REPLACEMENT CHARACTER addition is not valid in BINARY mode
Check for the Customer code pages and use the tcodes SCOV and SPUMG .
Please Go through these Documents,
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a

What is BC SET in SAP BASIS related to SAP Security.....................

Hi All,
Please explain me what is BC SET in SAP Basis which is related to SAP Security.
Can anyone explain in detail...
Thanks Much.
Swapna.D

Hi
Prerequisites
You want to create a BC Set from a transport request. A transport request containing Customizing data must already exist.
This Customizing request is a change request with which you can copy and transport the changed system settings.
The BC Set is based on the data in the Customizing request. You can copy all the data records in the Customizing request into the BC Set, or select a subset.
You can subsequently edit BC Sets created from transport requests.
Procedure
Enter the Customizing request number and Continue.
You can search for requests with the F4 help. The request type is Workbench/Customizing requests. The request status is changeable or released.
You get an overview of the transport objects in the transport request. To put a transport object in the BC Set, flag the row Copy.
The Status column tells you the BC Set-compatibility of the transport object. It can have the following values:
·        green traffic light: The transport object can be put in the BC Set.
·        yellow traffic light: BC Set creation or activation problems are possible. Check whether all data records have been put in the BC Set, after you create it.
·        red traffic light: Table entries exist, but they cannot be interpreted. They cannot be put in the BC Set.
·        Cancel: The transport object cannot be interpreted or put in the BC Set.

What are the components of sap script?

what are the components of sap script?

SAP scripts is a word processing tool of SAP which has the following components: Standard text. It is like a standard normal documents. Layout sets. - Layout set consists of the following components: Windows and pages, Paragraph formats, Character formats. Creating forms in the R/3 system. Every layout set consists of Header, paragraph, and character string. ABAP/4 program. Components of scripts are Layout sets, SAPScripts text, ABAP print program, symbols, function module like open form, start form, write form.
Please have a look at below links, might be useful for you.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRPROG/BCSRVSCRPROG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRRDI/BCSRVSCRRDI.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCREDIT/BCSRVSCREDIT.pdf
Also have a look at below links:
http://help.sap.com/saphelp_47x200/helpdata/en/d1/80318f454211d189710000e8322d00/frameset.htm
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf.
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
I hope it helps.
Best Regards,
Vibha
Please mark all the helpful answers

I am new to XI Technology Can u explain me what is CSV format

Hi all..
I am new to XI can u expalin me what is CSV format
Thanks & Regards,
Pushparaju.B

CSV stands for Comma Separated Value.
The CSV File Format
Each record is one line
 A record separator may consist of a line feed or a carriage return and line feed pair
 Fields may contain embedded line-breaks so a record may span more than one line.
Fields are separated with commas.
 Example John,11000, sdn.sap.com,USA
As you are new in XI world , following links might help you to understand it more expeditiously:
DOC to File(in CSV format) blog 
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
File to File Scenario:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Thanks,
Pooja Pandey

Getting message in .ALI format from SAP to external mail

Hi All,
             We are getting message in .ALI format from SAP to external mail , we want to receive in HTM or .txt format.
Please let me know what needs to be changed .
Thanks in advance
Thanks&Regards
Shams
Edited by: shams111 on Aug 11, 2009 9:23 PM

Hi Markus,
                             I have changed the format but iam getting it in format .pdf now .
     Under INET i have selected internet and changed format to : HTM,PDF,TXT .
   Please let me know what to do to get it in HTM format.
Thanks in advanse.
Thanks&Regards
Shams

What is the format of LO data sources?

What is the format of LO data sources?

Hello,
for some of your (many) questions you can find answer by yourself, if you read the documentation (as each other in this forum) e.g. LIS-DataSources in documentation of business content. --> help.sap.com
Regards,
André
Edited by: André Klos on Jul 2, 2008 1:54 PM

What is the diffrence between sap events and application events

Hi all,
what is the diffrence between sap events and application events.Can any one tell me with examples.
regards,

Hi,
Look at this,
System Events (Default)
The event is passed to the application server, but does not trigger the PAI. If you have registered an event handler method in your ABAP program for the event (using the SET HANDLER statement), this method is executed on the application server.
Within the event handler method, you can use the static method SET_NEW_OK_CODE of the global class CL_GUI_CFW to set a function code and trigger the PAI event yourself. After the PAI has been processed, the PBO event of the next screen is triggered.
The advantage of using this technique is that the event handler method is executed automatically and there are no conflicts with the automatic input checks associated with the screen. The disadvantage is that the contents of the screen fields are not transported to the program, which means that obsolete values could appear on the next screen. You can work around this by using the SET_NEW_OK_CODE method to trigger field transport and the PAI event after the event handler has finished.
Application Events
The event is passed to the application server, and triggers the PAI. The function code that you pass contains an internal identifier. You do not have to evaluate this in your ABAP program. Instead, if you want to handle the event, you must include a method call in a PAI dialog module for the static method DISPATCH of the global class CL_GUI_CFW. If you have defined an event handler method in your ABAP program for the event (using the SET HANDLER statement), the DISPATCH method calls it. After the event handler has been processed, control returns to the PAI event after the DISPATCH statement and PAI processing continues.
The advantage of this is that you can specify yourself the point at which the event is handled, and the contents of the screen fields are transported to the application server beforehand. The disadvantage is that this kind of event handling can lead to conflicts with the automatic input checks on the screen, causing events to be lost.
Hope u understood.
Thanks&Regards,
Ruthra.R

What is the diffrence between SAP View and CAD View ?

What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
Raj

Hello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K

Upload data from excel( XLS/xs format) in SAP CRM

Upload data from excel( XLS/xs format) in SAP CRM 7.0 as there is no *ALSM*EXCEL*ITAB* like FM there unlike ECC 6.0...?

hello Buddy,
plz go through below links
http://wiki.scn.sap.com/wiki/display/CRM/CRM+Web+UI+-+Uploading+data+from+Excel+files
http://scn.sap.com/docs/DOC-50732
http://scn.sap.com/docs/DOC-31985
Hope This will Help You...

Conditional Row formatting not working in RTF

Hi Everyone,
Using the code from the documentation, I have managed to get every other row in my report to highlight, but only when displayed in a PDF. It doesn't come out with any row formatting when viewed as an RTF.
Can anyone explain why this is, or how I can get the RTF to how the formatting as well??
The code I am using is from page 6-90 from the documentation, in the "for-each ROW" text field formatting options:
<?if@row:position() mod 2=0?><xsl:attribute name=”background-color” xdofo:ctx="incontext">#D9D9D9</xsl:attribute><?end if?>

Ok, thank you for your reply.
I think it is a bug, because, if I remember correctly, the example we mentioned is within a section about RTF templates, so it should work.
Anyway, I found a workaround. Based on the example where the CASE switch is used: you just draw all the posible formats (including background color) for the rows in your table in your template and conditionally display the correct format for each row. You can use 'IF' instead of 'CASE' (I personally find it easier).
I hope this helps.
Greetings.

What is row format in SAP B1

Similar Messages

Maybe you are looking for