What is s.m.a.r.t error

what is s.m.a.r.t error

SMART stands for Self-Monitoring And Reporting Technology, and is used in hard drives to track the health of the drive. Normally, if you bring up Disk Utility (on your hard drive in applications/utilities), you can see if the drive is verified (means it's OK) or not. You can also download SMART Utility to get more visability into the SMART sensors in the drive.
If you're getting the error while trying to download Mountain Lion, I would bring up Disk Utility per above, and see if it shows as verified. Or use SMART Utility. A SMART error would say your hard dirve has issues, and should probably be replaced. There are some workarounds, however, they tend to be temporary only.

Similar Messages

Please tell what to do if I see this error while opening an plan or while saving this plan?

Error messsge: the enterprise global already contains a table named “Enterprise Entry”.
Do you want to replace the table with the one from the enterprise global, replace all items with duplicates, rename the table in the project, or cancel opening the project.
Please tell what to do if I see this error while opening an plan or while saving this plan?

A-K-J --
The error message indicates that your Project Server administrator has accidentally polluted the Enterprise Global file with local view and/or tables. The solution does not lie with the user. It does not really matter what button the user clicks
in the dialog, since only the Project Server administrator can solve this problem. To solve the problem, the Project Server administrator must do the following:
Open the Enterprise Global file editing.
Click File > Organizer.
On the right side of the Organizer dialog (in the Enterprise Global file), delete any non-enterprise views. There should be NO views named Gantt Chart, Resource Sheet, etc. The only default enterprise view is named Enterprise Gantt Chart, which
should not be deleted.
Click the Tables tab.
On the right side of the Organizer dialog, delete any non-enterprise tables. There should be NO tables named Entry, Work, Cost, etc. The only default enterprise table is named Enterprise Entry, which should not be deleted.
Click the Close button.
Save the Enterprise Global file.
Close the Enterprise Global file.
Close Microsoft Project, relaunch the software, and log into Project Server again.
After completing the above steps, every PM should also exit Microsoft Project and relaunch the software again. Hope this helps.
Dale A. Howard [MVP]

I can not do the update , what should I do to fix this error ? "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

I can not do the update , what should I do to fix this error ?
"There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

Hi,
Please refer to the help document below:
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena

TS3274 When sending a photo by email, the receiver gets the photo upside down. Why is this and what can I do to correct the error please?

When sending a photo from my iPad with an email, the receiver gets the photo upside down. Why is this and what can I do to correct the error please?

I venture to say the recipient is a Windoze user and if so, state of the art Windoze ignores or doesn't recognize photo orientation data that is included with a photo's EXIF data.
There are 3rd party photo viewing apps that provide for this but not incorporated with Microsoft software.

What may be the cause of this error java.sql.SQLException: invalid sql type passed to callable statement in iplanet ussing JNDI

Hi,
The possibilities can be of various reasons, with the sql statements,
xml descriptors, data sources, improper drivers anything. To crack down
the solution, kindly let me know the error messages and what exactly are
you trying to accomplish.
Thanks & Regards
Raj
manimaran t wrote:
what may be the cause of this error java.sql.SQLException: invalid sql
type passed to callable statement in iplanet ussing JNDI
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

What action do I take when this error warning appears? Whilst executing onClick in Media Query Manag

What action do I take when this error warning appears? Whilst executing onClick in Media Query Manager.htm, the following JavaScript error ocurred: At line 157 of the file "Macintosh HD: Application: Adobe Dreamweaver CS5>5: Configuration Commands: Media Query Manager.js": getDocumentDOM: Argument nember 1 is invalid
Thank you

You'll get better answers in teh DW forum...
Mylenium

My home button isn't working well so i went to my service provider to ask about the problem. They advised me to update my iPhone to iOS 5 but the problem is no matter what i do, there is always an error. What should I do?

My home button isn't working well so i went to my service provider to ask about the problem. They advised me to update my iPhone to iOS 5 but the problem is no matter what i do, there is always an error. What should I do?

If you are having Issues with downloading iOS 5....
Try temporarily disabling your firewall and antivirus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/

What to do when you get an error message about data execution prevention

i have windowsXP and i downloaded Itunes now that i try to open itunes i'm getting an error message about Data Execution Prevention. Please let me know what to do to be able to open itunes...

You came from the correct article. Here is what it has to say about that error.
Error 2, 4 (or -4), 6, 1000, 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

What are some of the process chain errors one comes across?

hi friends
What are some of the process chain errors one comes across?

Hello Kiran,
Here are some of the errors that come across...
-> Rollup not possible, no filled aggregates available
-> Error when starting the extraction program
-> The process step locked by another changerun
-> Info objet does not contain alpha confirming values
-> Errors due to non activated objects
-> Errors due to duplicate records
-> Errors due to locking
-> Problems because of connection problem between source and bw systems
-> Problems due to RFC
Hope this helps you
Cheers
SRS

What table where i can find the errors in Sales Order

hi,
what table where i can find the errors in Sales Order. here's my situations, I need to create a abap report of CRM sales order not replicated to R/3 and show what's the error. I can't find the actual error in CRMD_ORDDERADM_H and CRMD_ORDERADM_I. I also tried calling program "CRM_ORDER_READ" but the program doesn't display/returns error's on header and item level.
please help.
earl g. faren

hi,
what i need is a table where i can find the sales transaction errors. I'm doing a abap report to list down sales transactions with error(s). I checked the table CRMD_ORDERADM_H and CRMD_ORDERADM_I but there's no field for transaction errors.
please help me find a table where I can link the tables above to get the specific errors for a sales transactions.
thanks alot.

What is causing ASA 5520 v8.4 error 305006 for DNS traffic?

I implemented transparent mode NAT in single context mode on an ASA 5520 v8.4. Some connections are working well, but I am seeing others unable to resolve DNS. I am seeing lot of the following error messages:
Syslog ID 305006 regular translation creation failed for udp src inside: 10.x.x.x/x des outside:192.168.1.3/53
Any ideas on what I might look for as possible errors in my configuration?

I implemented transparent mode NAT in single context mode on an ASA 5520 v8.4. Some connections are working well, but I am seeing others unable to resolve DNS. I am seeing lot of the following error messages:
Syslog ID 305006 regular translation creation failed for udp src inside: 10.x.x.x/x des outside:192.168.1.3/53
Any ideas on what I might look for as possible errors in my configuration?

TS3683 I have not been able to successfully back up my iPad to my MAC computer since 07/21/2013. I keep getting the error message "iTunes could not back up iPad "" because an error have occurred." Any suggestions on what I can do to resolve this error?

I have not been able to successfully back up my iPad to my MAC computer since 07/21/2013. I keep getting the error message "iTunes could not back up iPad "" because an error have occurred." Any suggestions on what I can do to resolve this error?

Hi there BuffaloSailor!
I have an article here with some troubleshooting suggestions for this issue:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Take care, and thanks for visiting the Apple Support Communities.
-Braden

TS3218 Syncing my 6th generation Ipod Classic 160gb, I get messages saying itunes could not copy songs to the ipod; (code -50) the reason. What must I do to correct this error, please?

Syncing my 6th generation Ipod Classic, I get loads of the same message, "Itunes could not copy songs into ipod due to error -50". The syncing then completes with only 15gb used space and 143 gb space free.
What can I do to correct this error, please?

See Corrupt iPod classic,
tt2

What is going on with the FATAL error message????

What is going on with the FATAL error message????

Same issue, since last night. Can't sign in to iTunes, download apps, or updates to apps on any device. I have iPhone 4S, iPad mini, MacBook Pro. East coast, writing this at 1:21pm EST. Changing password doesn't work. I can't log in with my iCloud address either. I have however noticed at least that if I enter the wrong password, I just get the incorrect password message. Using the right password gets the FATAL:: message every time.
I have my devices set to UK for the region even though I am in the US. Though that might have something to do with it so I switched to US- no change, same problem.
I agree that acknowledgement via their system status would be appropriate. Irritating that they are not at least publicly acknowledging there is a problem. I would feel much less concerned if I knew that they were aware and working on it. Can't find a support number anywhere but I did send a brief message via their help/contact page.

HT3728 I keep getting 'an unexpected error occurred. Try again.' error message when trying to reconnect to my AirPort Time Capsule. I have soft and hard reset and, eventually, factory reset the device. What do I do to correct the error?

I keep getting 'an unexpected error occurred. Try again.' error message when trying to reconnect to my AirPort Time Capsule. I have soft and hard reset and, eventually, factory reset the device. What do I do to correct the error?

Hi Philjp,
If you are having issues connecting to your Airport Time Capsule, even after a factory reset, you may find the following article helpful:
Apple Support: AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
http://support.apple.com/kb/TS4597
Regards,
- Brenden

I get an error that says that LR5 encounterd a preview cach error when trying to start LR5 and that it will try to fix it the next time it starts. What can I do to fix this error?

I get an error that says that LR5 encountered a preview cache error when trying to start LR5 and that it will try to fix it the next time it starts. What can I do to fix this error?

Go to the folder with you Lightroom Catalog (usually in Pictures) and delete the folder ending in .lrpreviews
This contains the previews for the files Lightroom has linked to. They will need to be rebuilt which can be done while working or selecting an amount you want to rebuild and accessing the rebuild command in the Library Dropdown menu...

What is s.m.a.r.t error

Similar Messages

Maybe you are looking for