What is SAP ECC 6.0?
Hi Folks,
Can somebody please tell me what is SAP ECC 6.0? and its full form as well.
Is it the central component of ERP system?And if yes, please explain how.
Kindly send some diagrams with this if (possible).
Thanks and regards
Anshu
Hi,
ECC stands for
"ERP Central Component"
and is the subcessor or SAP R/3
The sequence is:
SAP R/3 4.6C
SAP R/3 Enterprise 4.7
SAP ECC 5.0
SAP ECC 6.0
Attention, the licence are different.
SAP says:
Question
Is SAP ERP Central Component (ECC) - the technical successor of SAP R/3 covered of the existing licence agreement for SAP R/3 customers?
Answer
"No, ECC that is part of mySAP ERP software shipment is available to all customers that have a mySAP ERP or mySAP Business Suite license contract. Customers with a SAP R/3 license contract have the opportunity to convert their existing R/3 licenses, including a discount, either to a mySAP ERP contract or mySAP Business Suite contract. A customer with a mySAP Business Suite contract (formerly called 'mySAP.com' contract) has no need for a conversion, since a mySAP ERP license included in the mySAP Business Suite contract."
try this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c6c6e7-3ede-2a10-deb8-8da2071fbaf0
Regards Mazin
Similar Messages
-
hi,
i am new to abap i want to upgrade from sap 4.7 to sap ecc 6.0
what are my parts in abap . please send detail documents to my
mail id
[email protected]Hi
In SAP Netweaver platform SAP R/3 is replaced by SAP ECC.. its Enterprise Central Component, in SAP Netweaver 2004s the version is ECC 6.0.
See this link
http://help.sap.com/saphelp_erp2005/helpdata/en/43/44c532d36157c0e10000000a155369/Chap%2040%20IS-U%20SAP%20Utilities.pdf
There is also a very good document from Thomas Jung here in the SDN
that contain a lot of hardcopies of the changes.
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
Also, check the following threads:
Re: ABAP Changes for release ECC 5.0
Re: Technical difference between 4.7 and ECC 5.0
If its helpful or solved your issue, pls award points.
Regards
Chandrasekar -
Hi All,
What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?Hi Jayachander,
Have a look at these sap notes:
For taking backup: Schedule from DB13 and get the exact command from Logs
1841993 - SYB: How to schedule backups in DBA Cockpit
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
How to restore DB
1611715 - SYB: How to restore a Sybase ASE database server (Windows)
Divyanshu -
What MS SQL version for SAP ECC 6.0?
Hi,
we are preparing ourselves to move away from SAP R/3 & MS SQL 2000 to SAP ECC 6.0 and a new SQL platform.
From what I found, it runs on SAP_BASIS 7.0 - so both SQL 2005 and SQL 2008 are supported.
I was wondering, however, what SQL version do I need - would SAP ECC 6.0 run on Standard or does it require Enterprise Edition of SQL server?
Many thanks
Gavin
Edited by: Gavin Clark on Sep 9, 2008 5:07 PMHi Gavin,
you should always use the SQL EE for SAP installations (because of additional features that only come with EE).
Concerning SQL 9 or SQL 10, I would definitely go for SQL 10. It has some nice features like Backup Compression, Page/Row Compression and so on. Have a look [here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a236a2-8104-2b10-5ebe-8fef61cc82fd]. Just make sure that your installation meets the SR3 requirements.
We already have SQL 10 in production and did not encounter any problems.
Regards,
Sven -
The Transportation Module provides a very detailed functionality to capture & control the transportation both inward and outward. However there is a set of transaction codes in SAP ECC 6.0 which may provide some functionality on transportation.
Can Logistics Execution provide some basic control in the absence of Transportation Module? Also what are the advantages Transportation Management module provides over Logistics Execution in SAP ECC 6.0?Hello Prasad,
For ESS and MSS you do not require special data from the backend side, If a person has master data maintained in PA30, He can see his personal details in ESS, For that employee should maintain the Portal user id in Infotype 0105 , subtyp0001.
With that userid he can able to enter the portal and maintain his details. Same is the case for MSS , Manager should have maintained 0105 subtype 0001. and he can see the details of his employees in MSS application.
For ESS you need to have Portal
SAP_ESS
PCUI_GP
BP for ESS
You can check the following link :
http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
about the compatibility of Support Packages..
All the above mentioned package should be deployed on Eneterprise Portal.
You can search on various blogs also about this information.
Best Regards,
Deepak.. -
What's new in SAP ECC version(Technically)
Hi ALL,
iam and ABAPer new to SAP ECC version.
can u post me th document related to SAP ECC version (what are the technical changes in ECC& Syntax change in ECC)
thank uHi,
Welcome to SDN!
In SE38, click the blue icon (Information) with the "I" in it.
Click "New Features in ABAP".
There should be a subfolder there which says "ABAP Changes by Release".
There is also a very good document from Thomas Jung here in the SDN
that contain a lot of hardcopies of the changes.
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
Also, check the following threads:
Re: ABAP Changes for release ECC 5.0
Re: Technical difference between 4.7 and ECC 5.0
best regards,
Thangesh -
What oracle edition required for sap ecc and ep in one box
hi friends
what oracle edition required for sap ecc installation which supports the HA and disaster recovery plan
10g
1. Oracle Database Standard Edition One 10 g
2. Oracle Database Standard Edition 10g
3.Oracle Database Enterprise Edition 10g
3. Oracle Database Express Edition 10g
4. Oracle Database Personal Edition 10g
thanks in advance friends
regards
rajahi,
I believe that SAP only support enterprises edition one because you'll get all database features.
ardhian
http://sapbasis.wordpress.com -
What are the differences between SAPR/3 4,7EE and SAP ECC 6.0
Hi All,
Can you provide me any doc/info, which provides the differences between SAPR/3 4,7EE and SAP ECC 6.0
Regds
Rajhi Rajesh,
Difference between sapr/3 4.7 and sapr/3 ecc 5.0:
See https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/a7455fd8-0301-001
All details can be found at http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000497320&_SCENARIO=01100035870000000112&_O
Regards,
santosh -
Hi All,
Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
ThanksHi Surya,
Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
From Shop floor:
shop floor --> SAP MII --> ECC
1. Use either Web service or fetch data from DB and pass data to BAPI's for sending to ECC through BLS transaction.
Regards,
Praveen Reddy -
RFC connection from SAP Data services to SAP ECC
We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP gateway and service is name is correct.
Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
Thanks in advance for helping to solve the RFC connection issue.
Edited by: gupta sasha az on Dec 19, 2011 7:24 PMI am new to SAP and we have just started work on Data Services.
I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
Thanks for your help and time. -
How to trigger crystal report from SAP ECC
Hi All,
I hope i m right forum to ask this question.
we want to do label printing from Crystal reports. data will be present in SAP ECC .
So I below issues
1 ) how to connect SAP ECC database with Crystal Reports.
2 ) how to trigger print output in Crystal reports from ECC , lets say I create a Delivery In ECC , the print output will be issued to Crystal report and I should get a print out Immediately ( for printing - printer will be connected to local system and SAP network printer ) .
I have worked with this type of scenario in smarforms , adobeforms. but not with Crystal Reports ...
Regards
Yashpal Gupta.Hi Yashpal,
First thing you need to do is install the Connector on both your work station where you run Crystal Reports as well as the SAP Server where the data is.
So I moved your post to the SAP Integration Kit forum.
Need to know what version of Crystal Reports you are using?
Search of browse here, lots of info on how to...
Thanks
Don -
Hi All,
Please give the more Information on SAP ECC 6.0. I dont know any thing about this but have knowledge on SAP-ABAP, MM, ---etc. Please clarify below Questions
What is it. How it is work at Real Time.
Thanks,
DurgaHello Durga,
Please find the thread in which Nishant has explained very well.
SAP ECC 6.0
Hope this helps
Regards
Arif Mansuri -
Key functional differences between SAP ECC Version 6.0 and SAP Version 4.6
Hi Forum,
As we are currently updgqrading to SAP ECC Version 6.0 from SAP Version 4.6, could someone please identify what are the new functionalities are being offred in SAP ECC 6.0.
Please let me know or guide me in a right direction - my email address is [email protected] or simply reply to the forum.
Thank you
YogeshDear Yogesh,
Please go through Upgrade info @ service.sap.com.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack.
4.6C supports NONUNICODE.
Hope this would add some more info.
Regards,
Naveen. -
Hello Everyone,
If any changes are done in SAP BO Analysis office, then the change can be done in the SAP BW in the respective Targets.
But how can we do the changes in the SAP ECC ? Is it possible to do the changes in the tables ?
Any answer is appreciable
Regards,
KarteekWe are using the "Input ready Bex query", in order to modify the values in "BO Analysis office".
ECC BI BO Analysis office
1 -------------> 1 ----------> 1 ------
|
| (Now Data is changed in Analysis office from 1 to 2)
|
(?) <-------------- 2 <---------- 2 <-----
(Will it be updated in ECC)
(Diagram Explanation)
From ECC we can load the data (Consider Value-1) to SAP BI and from SAP BI we can load the data to BO analysis office.
So, now if we change the data in BO Analysis office (Value-1 changed to Value-2)..
Now the data is changed in SAP BI to Value-2.
So what about the data in ECC ? Whether it is changed or not?
Please provide us a real time business Scenario..
Thanks,
Karteek -
Install both SAP ECC 6.0 EHP 4 and Solution Manager in C drive
Hi, SDN fellows.
I just want to confirm this.
I am trying to install SAP ECC 6.0 EHP 4 and Solution Manager in C drive. Are these OK, since they both will be installed under the C:\usr folder?
What precaution we need to install these two SAP components in the same drive (C)?
I am installing both components in MS Window Server 2008 R2 SP1 with MS SQL Server 2005 SP3.
Thanks,
KCHi, Nick.
Sorry, I missed the "IDES". I am installing SAP ECC6.0 EHP4 IDES system for training purpose within the organization.
I am referring to the Installation Guide - SAP ERP 6.0 EHP Ready ABAP on Window MS SQL Server (Based on NW 7.0 incl EHP 1). All downloaded installation files are from: EHP4 for SAP ERP 6.0/NW7.01 --> IDES --> --> Widnows Server --> MS SQL Server.
The OS is installed in C drive.
I have allocated 250GB in C drive and 200GB in D drive from SAN.
For IDES system (I know it is similar to the standard ECC), is it also recommended to install in D drive (separate from the OS)?
In this case, should I install both Solution Manger and IDES in D drive?
Or what is the best combination where I should install these two systems?
Thanks,
KC
Maybe you are looking for
-
I am getting soooooo screwed and about to get a lawyer!!!
I am completely at the end of my rope with this company and my phone bill! I had unlimited data for years, took full advantage of it by using it as a mobile hotspot and for streaming Netflix into my home. I def got my money's worth over the years, bu
-
I have recently found that when using a Sharepoint 2010 Content Editor web part to house some Javascript that the window.location.href (or window.location) is not working when the end users have IE8 installed on their PC's. We have confirmed that th
-
HP Pavilion dv6-7010us Entertainm​ent Notebook PC
My motheroarbd went out on my DV6 7010. I had to wait awhile before I could get another MB so used the HD from it for another computer (HPG-60) Now I am putting it back in my DV6 7010US. The problem is it seems that the windows from my other computer
-
ALE Settings error: Outbound: LS to KU
Hi Guys, Requirement: send idoc to customer 1000358 (KU) when user execute a report in R/3 when user execute report we have written the code for idoc generation using function module MASTER_IDOC_DISTRIBUTE. the idoc number is geeting genarated succe
-
Error - "The data area passed to a system call is too small"
When I will add the invoice, this error raise in the GetLastErrorDescription of company object... What it's wrong with my code ? Dim sComp As New SAP.Company With sComp .Server = "(local)" .CompanyDB = "SBODemo_Brazil" .User