What is sap solution manager

hi all,
i m vikas saini. i am a sap tecnical consultant(abap).
pls tell me what is sap solution manager.
how it's work and how i can useful for me.
and how i can learn it by selfstudy.
or it required some special training.
thanks and regards
vikas saini.

Hi,
Solution Manger is a central platform for all solutions.
Its a Support hub and gateway between SAP serivce market and the customer.
It helps in providibg tools, content, procedures,services to implement and operate the SAP solutions.
It helps in improving the IT services for a business and reduce the Downtimes to reduce the production loss.
It also helps in facing and solving technical risks.
Initially to upgrade the SAP related softwares Solution manager was not in need, but in the Netweaver level to upgrade Solution manager is a must decided but SAP at Germany.
So in a landscape Solution manager is also installed in a separate system and oneside connected to servicemarket and otherside to the landscape at your place.
Its mostly related to Basis Part of SAP.
I think this would give you an idea of what is SolMan.
Reward if useful.
Regards
Arun

Similar Messages

What is SAP Solutions Manager (4.0)

Hi all,
can any one help me in understanding SAP Solutions Manager (4.0). what is SAP Solutions Manager (4.0).
Thank you
ajay

Hi,
follow these links hope you get an idea about Solution manager
http://help.sap.com/saphelp_nw2004s/helpdata/en/19/bb596efb31da4da0dc2e9f8977152d/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/5dc13690581b20e10000009b38f839/frameset.htm
Do reward points if useful.
Regards,
Nayana

What is exactly a IBASE in SAP Solution manager

Dear all
I'm making the configuration of service desk on SAP Solution manager, and then i have to make a set up of IBASE. Can anyone tel me what exactly is IBASE in solution manager?
thanks
Edited by: hchabi on Apr 1, 2010 1:45 PM

Hi
In solman you have SOL_MAN_DATA_REP as main IBASE or 1 and other managed systems will be attached to it as a component.
and you can check it in IB53 by entering "1" in the initial screen
For automatic generation you can use tcode IB_GEN and all the connected systems ibase will be generated and attached to ur ibase
Morever theoretically,
An installed base can be described as a multilevel structure of installed base components for managing objects (for example, devices, machines, software) that are installed, or are going to be installed on site at the customer site. An installed base can represent the reference basis for services.
An installed base describes the hierarchical structure of these objects and their individual parts (components
In business processes, an installed base can be referred to as a general unit or as an individual element (component).
The set of installed objects at the customeru2019s can be used, for example:
·        To determine the exact object for which a problem has been reported
·        To determine in detail what the transaction (for example, visit by field service representative, repair by a service employee) refers to
·        By the service employee as information about which object is affected and the parts it consists of
·        For documenting changes made to objects
Hope it helps and doubt is cleared
Regards
Prakhar

Questions on "FAQ - SAP Solution Manager for VARs"

Hi,
I just got through the FAQ - SAP Solution Manager for VARs, but have some further questions:
For me it is not quite clear which connections are necessary for which VAR scenrio.. currently we have setup the service desk in our solman. Customer's aren't linked to the solman yet - we have saprouter-saprouter connections. Connecting them via SAP support backbone is an interesting option, especially for incident management. To get this working we should follow note 1124718 right?
But what about the other scenarios like maintenance optimizer and ewa monitoring? I guess for that we definitly need to build up RFC connections to each relevant customer system (~300+x)?! I think it will be hard to handle so many connections - just consider if a customer is cancalling the maintenance contract, everything needs to be removed again... best would be to have a central communication point...
For MOPZ we need up-to-date system information. So everyone is talking about SLD. Do you also recommend this option? There we need again a connection (direct to SolMan SLD or via external SLD on customer side).
According to the FAQ there is a workaround for ewa monitoring for customers with security doubts.. is this also working for non-ABAP components? We need SMD and WI for generating ewas for JAVA systems...
With regards to Enterprise Support contract: ewa only need to be monitored for productive systems? Can a customer be charged if they want to have ewas monitored for other sytems too? How long do we need to keep the ewas (1 month, 3 months, half year) before they are deleted? Are there any specific requirements?
All the work to get these scenarios working.. is this covered within the Enterprise Support contract? Can the customer be charged for work thats done by the VAR in their system (e.g. RFC connections, SDCCN, SLD,...)?
Sorry for this long text.. hope you have some helpful ideas!
Regards,
Richard

Hello Richard,
(1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information.
(2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
(3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
(4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
Kind regards
Heinrich

Error in Import Java Dump phase while installing SAP solution Manager 7.1

Hi,
While installing SAP solution manager 7.1 I am getting the below error during the phase "Import Java Dump".
An error occurred while processing option SAP Solution Manager 7.1 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step : Execution of JLoad tool 'C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\install\sharedlib\launcher.jar" -showversion -Xmx1024m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/install/lib/iaik_jce.jar;C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/install/sharedlib;D:/usr/sap/SPT/SYS/exe/uc/NTAMD64/mssjdbc/sqljdbc.jar" -sec SPT,jdbc/pool/SPT,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.properties,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.key -dataDir "D:/SAP SOLMAN/Java Components/51040039\DATA_UNITS\SOLMAN_JAVA_EXPORT_JDMP" -job "C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML" -log jload.log' aborts with return code 1. SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/jload.java.log' for more information.
JLOAD.JAVA log details below
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_17-b06, mixed mode)
Jload R 7.12 V 0 A 0
Jload -sec SPT,jdbc/pool/SPT,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.properties,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.key -dataDir D:/SAP SOLMAN/Java Components/51040039\DATA_UNITS\SOLMAN_JAVA_EXPORT_JDMP -job C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML -log jload.log
Connecting to database
Couldn't connect to DB
com.sap.inst.common.exception.DBConnectionException: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
     at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:157)
     at com.sap.inst.jload.Jload.main(Jload.java:222)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
     at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
     at com.sap.inst.common.db.DBConnection.connectViaSecureStore(DBConnection.java:111)
     at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:151)
     ... 6 more
An error occured during execution. Please consult SAP note 942766 for first steps on troubleshooting the problem.
I have gone thru with the notes and it didn't help me much.
I have used J2SDK 1.4.2_17 nad JCE_Policy-1.4.2 files.
Please let me know where IO went wrong.
Thanks in advance.
Sai

Hi,
1. Did you select java path (Export CD/DVD) while intsallation? Check once again.
2. Add JAVA_HOME = Java path in environment variable.
3. What is the exact error, you got it, post error here.
Regards,
Srini Nookala

SAP Solution Manager - Learn and Use

Hi All,
I have some knowledge in SAP ABAP. I am interested to learn about SAP Solution Manager and how to work in it.
Can anyone help me in this regard? If you have any documents or presentations, please let me know.
Thanks in advance.

Hi,
First start with learning what solution manger can do.
http://service.sap.com/solutionmanger
then click on Media library on left hand pan there first go through use case presentations, which will give an insight into possibilities.
Then you can explore more.
Hope this helps.
Feel free to revert back.
--RAgu

R3load -testconnect failed while installing SAP Solution manager

Hi
I'm trying to install sap solution manager, it gets to "abap import" and then gives an error. I think there is a problem with database connection.
Here is what I get in the log
INFO 2007-03-22 17:03:01
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.2.xml'.
INFO 2007-03-22 17:03:01
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.3.xml'.
INFO 2007-03-22 17:03:06
Execute step Component W2K_ServicePack_Check|ind|ind|ind|indPreprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2007-03-22 17:03:18
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/keydb.2.xml'.
INFO 2007-03-22 17:03:18
Execute step testDatabaseConnection of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0.
INFO 2007-03-22 17:03:32
Switched to user: lvtadm.
INFO 2007-03-22 17:03:32
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\R3load.exe.log.
INFO 2007-03-22 17:03:32
Switched to user: lvtadm.
INFO 2007-03-22 17:03:32
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS.
INFO 2007-03-22 17:03:32
Output of C:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe -testconnect is written to the logfile R3load.exe.log.
WARNING 2007-03-22 17:03:33
Execution of the command "C:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe -testconnect" finished with return code 2. Output: sapparam: sapargv( argc, argv) has not been called.sapparam(1c): No Profile used.sapparam: SAPSYSTEMNAME neither in Profile nor in CommandlineC:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20070322170332
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SM1' as 'saplvt' failed
(DB) ERROR: DbSlErrorMsg rc = 29
ERROR 2007-03-22 17:03:33
CJS-30023 Process call 'C:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
ERROR 2007-03-22 17:03:33
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR .
Any assistance will be rewarded.
Thanks in advance

Hi Louis
>>>snip<<<
For details see log file(s) R3load.exe.log.
>>>unsnip<<<
Or logon as <sid>adm and issue
R3trans -x
Then take a look at trans.log
Hth+Best regards
dirk

Web service available in SAP Solution Manager

Hi,
Which are the Webservices available in SAP Solution Manager.
I want to Integrate HP Openview change request process with SAP Solution Manager ChaRM.
Regards
PK
Edited by: PK on Aug 9, 2010 3:37 PM

Although the path vary between release - webservices for Solution Manager are usually available in transaction SICF
under the following path
/default_host/sap/bc/solman
/default_host/sap/bc/bsp/sap/solutionmanager
However I am not aware of an webservice/interface from CHARM to 3rd party service desk products
What is provided as of Solman 7 is an interface between SAP Service Desk and other 3rd party service desk products
- so if you setup Solution Manager Service Desk you can have a business process from
Openview ---> SAP Service Desk ---> SAP Charm
Best wishes
Stuart

Upgrade to SAP Solution Manager 3.2 to 7.0 EHP

Dear Experts
At present I am using SAP Solution manager 3.2. Now I am planing to update SAP Solution Manager 7.0.
I am some confutation in SAP Solution Manager 7.0 and SAP Solution Manager 7.0 EHP1,
what i do please help me.
Regards
Sanjay C.

EHP1 is basically a product enhancement of 700 - i.e offers new functionality
Usually to get to Enhancement packages you need to be operating NW2004S stack based product - in this case 4.0 (now called Solution Manager 7.0)
I think this proposal will require first an upgrade from 3.2 to 4.0
then after applying Enhancement Package EHP1 and following pre-reqs for both steps
Also bearing in mind that Solution Manager is RFC dependant any change in SID, Hostname or client will require
all RFC connections will need to be adapted
There may also be special considerations depending on source configuration or the active Solution Manager scenarios and content
I would take a look at following PDF for reference - it may help in the initial 3.2-->4.0 upgrade
http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&_OBJECT=011000358700000208052007E
Best wishes
Stuart

Please suggest on: SAP Solution Manager Installation

Hi Experts,
We are going to install SAP Solution Manager in our landscape. Our present SAP version is: ECC 6.0 and Database is: Oracle 10.2.0.2 and OS is: AIX 5.3
1. Please suggest us which is the suitable Solution manager version for our environment?
2. What are the pre-requisites and needful steps to take before starting the installation?
3. Where can I get complete step by step documents for this activity?
4. Which OS & DB is suitable for our environment?
Thanks in advance!
Veera

Can I also ask for some confirmation about a couple of things. I have looked at the SAP documents but I can't find a definite answer to these questions:
1. David Kroone - you say that Solution manager should be set up on a new server but I understand that it is possible to run it on one of our existing R/3 servers. Is this correct? Does anyone have any comments about this?
2. David - you also say that we can pick any OS & DB for the Solution Manager server. We are running R/3 on Oracle/Solaris but would prefer to run Solution Manager on a Windows server running SQLServer. Is this definitely OK? (it would be cheaper though you advise that using the same platform could make it simpler - is this because Solution Manager works better on the same platform or is it just because we would then have a more homogeneous environment?)
3. We are currently on 4.7 but plan to move to ECC6 this summer. We want (need?) to install Solution Manager before we upgrade to ECC6. Should this affect our decision in anyway?
Sorry to re-ask the same questions but it's difficult to find a precise answer in the SAP documents.

Is SAP Solution manager mandatory for SRM7 implementation?

Dear experts,
I get to know that use of SAP solution manager is mandatory for SRM 7 implementation. is it true?
what is the best practice to manage a SAP SRM implementation project? should we manage the project in SAP SM or outside of it?
Thanks and regards,
Ranjan
Ranjan Sutradhar

Hi Ranjan,
Solution Manager is not mandatory for SRM 7 implementation.
Only thing is Solution Manager contains best pratices for Project implementation e.g AS is process , to be process, blue print etc.
It is just a guilde. All things might not be required for your project.
We did it without solution Manager except that we used it for generating installation key & for maintainance opt.
Best Wishes,
Tushar.

1)    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?       i. The list of the modules that are being managed by SAP Solution Manager(s)      ii. The performance metrics of those modules/components at th

1)
Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
i. The list of the modules that are being managed by SAP Solution Manager(s)
ii. The performance metrics of those modules/components at the high level
iii. The information about Early Watch Alerts (or situations to watch for)
2)
Is there a full SNMP interface for getting the above information from SAP Solution Manager?
3)
Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
4)
Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
     at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

Error accessing transaction SOLMAN_WORKCENTER in SAP Solution Manager

I get the error below when I try to access workcenters in SAP solution Manager ehp1 via transaction SOLMAN_WORKCENTER
Error while processing your query
What has happened?
The URL call http://sol.test.com:8000/sap/bc/webdynpro/sap/ags_workcenter was terminated because of an error.
Note
The followin error text was processed in smc the systm: Syntax error in program CL_POWL_UTIL==================CP .
The error occurred on the application server sol_smc_00 and in the work process. 0
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_QUERIES of program CL_POWL_QUERY_API=============CP
Method: GET_WORKLISTS of program CL_CONTROL_CENTER_API_FOR_POWLCP
Method: IF_AGS_CONTROL_CENTER_API~GET_WORKLISTS of program CL_AGS_POWL_BASIC=============CP
Method: GET_WORK_LIST of program /1BCWDY/0ALGK7P51EY0JCPIHVQ5==CP
Method: IF_COMPONENTCONTROLLER~GET_WORK_LIST of program /1BCWDY/0ALGK7P51EY0JCPIHVQ5==CP
Method: HANDLEDEFAULT of program /1BCWDY/0ALGK7P51EY0JCPIHVQ5==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/0ALGK7P51EY0JCPIHVQ5==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
What can you do?
With the termination type RABAX_STATE you will find in the system smc in transaction ST22 more information on the cause of the termination.
With termination type ABORT_MESSAGE_STATE you will findon the application server sol_smc_00 in transaction SM21 more information on the cause of the termination.
With termination type ERROR_MESSAGE_STATE you can scan for further information in the trace file for the work process 0 in transaction ST11 on the application server. sol_smc_00 It is possible that an analysis of the trace files for the other work processes is necessary.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 001 -u: lolli -l: E -s: smc -i: sol_smc_00 -w: 0 -d: 20110415 -t: 165748 -v: RABAX_STATE -e: SYNTAX_ERROR -X: 00235AB4EF731EE099F78539B74CB1A5_00235AB4EF731EE099F78537687251A5_1 -x: 29BC67E0BACDF16BB1A500235AB4EF73
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
How do I resolve this error?

Hi Mateus,
Thanks for your keen interest in assisting.
This is an excerpt from ST22....even though i am not an ABAP person.
Error in the ABAP Application Program
The current ABAP program "CL_POWL_QUERY_API===========CP" had to be terminated becuase it has come accross a statement that
unfortunately cannot be executed.
The following syntax error occured in program
"CL_POWL_UTIL===========CP" in include
"CL_POWL_UTIL===========CM007" IN
line 48:
"Incorrect logical expression: ")" without preceding "("."
The include has been created and last changed by:
Created by "SAP"
Last changed by: "BODE"
Error in the ABAP Application Program
The currect ABAP Program "CL_POWL_QUERY_API=============CP" had to be terminated becuase it has come accross
a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_POWL_UTIL===========CP".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look at and manag termination messages.
and you can also keep them for a long time.
When i clicked on the ABAP Editor in ST22, I have the code below
method GET_QUERIES.
data: ls_authorities type powl_authorities_sty,
        lt_vistypes type powl_type_tty,
        lt_visqueries type powl_query_tty,
        ls_api_query type powl_query_asty.
field-symbols: <fs_query> type powl_query_sty.
cl_powl_util=>do_authority_checks_for_user(
    exporting
     i_applid = i_applid
     i_user   = i_user
    changing
     c_authorities = ls_authorities
lt_vistypes = cl_powl_type_accessor=>get_visible_types(
      i_applid = i_applid
      i_langu = sy-langu
      i_username = i_user
lt_visqueries = cl_powl_query_accessor=>get_visible_queries(
     i_applid = i_applid
     i_authorities = ls_authorities
     i_langu = sy-langu
     i_username = i_user
     i_vistypes = lt_vistypes
loop at lt_visqueries assigning <fs_query>.
    move-corresponding <fs_query> to ls_api_query.
    insert ls_api_query into table result.
endloop.
endmethod.
The cursor is on this line containing the statement below
"cl_powl_util=>do_authority_checks_for_user("

Problem installing SAP solution Manager

Hello,
I want to install SAP Solution Manager on a LINUX system.
My system information is:
>uname -a
Linux sapsolm1 2.6.9-67.0.1.ELsmp #1 SMP Fri Nov 30 11:57:43 EST 2007 x86_64 x86_64 x86_64 GNU/Linux
If I follow the installation manual and start sapinst nothing happens as you could see in the log below. If I start "./startInstGui.sh" I get an error message. Does any body have an idea what is wrong on my system why the installation GUI is not starting up?
I'll start the installation form the path: /backup/51032955/IM_LINUX_X86_64
The CD number I use is 51032955.
Many thanks.
Richard Meijn
Screen log
[root@sapsolm1 IM_LINUX_X86_64]$ ./sapinst
[==============================] - extracting... done!
Starting GuiServer using:
/usr/bin/java -cp /backup/sapinst_instdir/sapinst_exe.20122.1202218058/JAR/instgui.jar:/backup/sapinst_instdir/sapinst_exe.20122.1202218058/JAR/inqmyxml.jar -Djava.security.egd=file:/dev/urandom SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
init: retrieving account information for group sapinst...
init: retrieving account information done.
load resource pool /backup/51032955/IM_LINUX_X86_64/resourcepool.xml
guiengine: no GUI server connected; waiting for a connection on host sapsolm1, port 21200 to continue with the installation
[root@sapsolm1 IM_LINUX_X86_64]$ ./startInstGui.sh
Java Runtime found in PATH environment variable
Path: java
Start mode: gui (GUI only)
Connection parameters:
GUIServer host: localhost
GUIServer port: 21212
Starting...
Warning: -Xmx256M not understood. Ignoring.
Exception in thread "GtkMain" java.lang.UnsatisfiedLinkError: gtkInit
   at JvLookupJNIMethod (/usr/lib64/libgcj.so.5.0.0)
   at JvJNIMethod.call(ffi_cif, void, ffi_raw, void) (/usr/lib64/libgcj.so.5.0.0)
   at gnu.java.awt.peer.gtk.GtkMainThread.run() (Unknown Source)
   at java.lang.Thread.run() (/usr/lib64/libgcj.so.5.0.0)
   at JvThreadRun(java.lang.Thread) (/usr/lib64/libgcj.so.5.0.0)
   at GC_start_routine (/usr/lib64/libgcj.so.5.0.0)
   at __clone (/lib64/tls/libc-2.3.4.so)

I suggest (to be clean) - start from the beginning.
Check the installation guide (http://service.sap.com/instguides) - it has a detailed section about what to remove in which directory.
Also check note 171356 - SAP software on Linux: Essential information for other things you need to install/configure (saplocales etc.)
Additionally check your distribution specifc configuration settings in note 722273 - Red Hat Enterprise Linux 3 and 4: Installation and upgrade (Redhat 4.x assumed).
Finally check note 861215 - Recommended Settings for the Linux on AMD64/EM64T JVM for the Java settings after you´ve done your installation.
Markus

How to work sap solution manager

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. please search first. >
Hi experts,
can anybody what is the use of sap solution manger and how its work.
Regards,
arti singh

The SAP Solution Manager supports you throughout the entire life-cycle of your solutions, from the Business Blueprint to the configuration to production processing. It provides central access to tools, methods and preconfigured contents which you can use during evaluation, implementation and operational processing of your systems.
Features
Implementing and Upgrading SAP Solutions
     Central access to all tools for your project (Project Administration, Business Blueprint, Configuration, Test Workbench, create Group Rollout templates)
     Central management of all information for your Project (roadmaps, system landscape, project documentation)
     Compare and synchronize customizing in different SAP components
Solution Monitoring
     Central System administration
     Analysis of your system landscape with Service Level Reporting
     Real-time System Monitoring
     Business process monitoring
Services and Support
Access to programs and Services to monitor and optimize the performance and availability of your system landscapes, and minimize risks when running your systems
Service Desk
Solution support with workflow to Create and Process Problem Messages
Change Management
Manage change requests, with workflow to trace and audit changes and transports in your system landscape with Change Request Management.

What is sap solution manager

Similar Messages

Maybe you are looking for