What is SAP standard program to delete values in the table HRPADPM for ECM?

Hi Experts,
I have problem of inconsistency between HRPADPM and infotype 0759. I want to make this consistent, how do I do that? if not, how do I clean up the data of these tables?
Thanks,
Anthony

Hi,
I'm afraid in standard SAP do not have such report.
As a workaround you could try the following: The correction would consist of the following steps:
1) remove the link between the budget and the IT0759 in the IMG step "Assign Compensation Review Item Attributes"
Here you will need to remove the "Budget Type"
2) Then you should delete the IT0759 records for which the budget was not updated (revert the process completely, this means that if the status of IT0759 is "active" you will need to check IT0008 also)
3) next step will be to reset the link removed in step 1) betweenthe budget and the IT0759
4) create new IT0759 records as initially intended
Please note that you should try this in a test or development system first and check if everything worked well before using it in the production system.
Hope this help
Sarah

Similar Messages

  • What are the SAP standard programs?

    Hi PM Guys,
    I have a question that is as below:-
    We have the following Master Data:
    1) Functional Location
    2) Equipment
    3) Equipment BOM
    4) Counter
    5) Catalog Profiles
    6) Task List
    a) General Task List
    b) Equipment Task List
    7) Maintenance Plans
    a) Time Based
    b) Performance Based
    Can you tell me the SAP standard programs available for the above master data which can be used for data migration of the above master data from the flat files into SAP system.
    Thanks in Advance,
    Vijaya Krishna

    HI
    you can find the standard program while executing the T code LSMW itself.
    type LSMW ,specify the description in the next screen select the <b>Standard batch or direct input</b> under the heading you can find the in the field <b>object</b> use F4 to find all the standard programs in SAP
    0400   Equipment         
    0410   Message (IH)      
    0420   Confirmation (IH) 
    0425   Measuring point   
    0430   Measurement Documen
    0440   Functional location
    0450   Object link       
    0460   Maintenance plan  
    0470   Equipment task list
    0480   FnctnlLoc.TaskList
    0490   Gen.task list     
    regards
    thyagarjan

  • Runtime Error In copy Of SAP Standard Program

    How do people,
    I have copied a SAP standard program H99CWTR0 because I need to add an extra
    column output in the report. I have made a few chnages regarding the INCLUDES
    When I run the program I am getting the following runtime error:
    " The structure of the COMMON PART "DRIVER_DATA_EXCHANGE"
    in program "%_T01050" is different from the calling program .....
    My question is that it says the error in program "%_T01050"  !!
    But when I enter this in SE38 it says it doesn't exist !
    Any ideas???
    Andy

    Thanks mate for replying.
    I'll have a look at what you suggest
    Andy

  • Syntax error in SAP-standard program

    Hi experts,
    i am facing syntax error in sap standard program.how i can solve that error .
    Error in include LFKPZTOP  and errro is at line 70.
    please help me ASAP.
    Thanx & Rgds
    Zeba

    Hello Zeba,
    go to include LFKPZTOP and check in line 70.
    if you are not able  to solve that.
    post the same line, so that we can understand what is error.
    as of my checking the error is "iban is already defined in the include structure bus0bk ,
    but i think it dosn't effect your programing.
    Regards!
    Edited by: Prasanth M on Feb 10, 2009 5:04 PM

  • What is SAP Web Programming?

    What does SAP Web Programming mean?
    Does this involve Jave integration in SAP?

    You can do web programming for SAP in most web technologies, both from SAP world and the "ordinary" world.
    From SAP: BSP, PDK, Java/ ABAP Webdynpro and integrations with other technology standards for web development
    Ordinary: Java connector (can be JSP/ J2EE), PHP integration etc.
    Hope that solves your question, Otto
    p.s.: for most (or all?) the mentioned technologies you can find the separate forum here on SDN

  • Do we any SAP Standard program to Send IDOC of Type CODCMT01

    Do we any SAP Standard program for outbound processing for IDOC Type CODCMT01
    Message was edited by: Vipin Nagpal

    - If it is for test purpose only, you could use transaction WE19 (Test Tool).
    - As well you could write your own program and user MASTER_IDOC_DISTRIBUTE function module... but in this case you need to fill yourself the fields of the IDOC
    - as well you can have a look at function group KALE...
    E.g. function module K_DOCUMENT_SEND

  • How  to add custom fields to the  sap standard  program ukm_bp_display

    How  to add new custom  fields to the  sap standard  program ukm_bp_display .
    could u  please any one help me on this?

    Hello Kumar,
    You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
    Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
    DATA: BEGIN OF gt_grid_alv OCCURS 0.
           partner LIKE but000-partner,
           credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
            INCLUDE STRUCTURE ukm_s_account.
            INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
    DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
          Gruppe Vector
            INCLUDE STRUCTURE ukm_s_bp_vector.
          Gruppe OBL = Obligo
          include structure UKM_S_BP_CMS_MALUSDSP_OUT.
            INCLUDE STRUCTURE ukm_s_display_segment.
            INCLUDE STRUCTURE ukm_s_bp_cms.
            INCLUDE STRUCTURE bus000_dat.
    *DATA:   icon(4).
          Gruppe RAST (Raster)
    DATA:
             rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
    DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
    "Summe raster 2 bis 6
    DATA:  END OF gt_grid_alv.
    Another way is you can  go  to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
    Hope this will solve yiour problems.
    Regards,
    Antony Thomas

  • How to fnd SAP STANDARD program of Database table

    Hi to all,
    Please can anybody tell me , how to find out SAP standard program of database Tables  S070    (Breakdown Statistics).
    As this table contain two filelds Time To Repair and Time Between Repair , i want to knew how the standard program for the table have calculate them.
    i shall be thankfull to you for this.
    Regards
    Pavneet Rana

    Hi,
    Program for table is generated dynamically for each user ID, when ever you change the selection screen in SE16 or when you are executing the table entries for first time. Usually it starts with /1BCDWB/DB followed by table name. In your case it would be /1BCDWB/DBS070.
    Go to Se16, enter your table name and click enter. Once you are in selection screen, goto Menu=>system=>Status. Here you can see the program name.
    Thanks,
    Vinod.

  • Addition of my code in sap standard program

    hi gurus,
                  can i add my code in the sap enhancement below in sap standard program
    i want add the logic below.
    ENHANCEMENT-POINT MATERIALFINDUNG_10 SPOTS ES_SAPFV45P.
    $$-Start: MATERIALFINDUNG_10----
    $$
    ENHANCEMENT 153  OI0_COMMON_SAPFV45P.    "active version
    IF NOT G_OIK_SUBMAT IS INITIAL.                         "SOTK000026 DN
         TVAK-KALSU = G_OIK_KALSU.                           "SOTK000026 DN
         CLEAR PRODUCT_SELECTION_REKURSIV.                   "SOTK000026 DN
    ENDIF.                                                  "SOTK000026 DN
    ENDENHANCEMENT.
    when i click on enhance button(shift+F4) it does not give me any place to write.
    but if i click  on the enhancement name i am able create one implementation. is that ok.should i add my code there.

    Hi Kiran,
    That is not the solution I am looking at. Also the link provided within the link you provided does not work which is:
    http://www.synactive.net/site/index.htm
    Do let me know if you have a solution to change the standard GUI status(Not by copying nor by using the access key) either by any menu exit or something of that sort.
    Regards,
    Deepak.

  • How  and where does SAP standard programs update the master tables...

    Hello there,
    How  and where does SAP standard programs update the master tables...
    to be precise.. if a (any) transaction occurs  the programs behind it holds the data in temporary structures.
    where and when does it get updated in the master table.
    can anyone tell me how it happens?
    I Know that from the where used list one can find the corresponding table but most of the time it wont suffice
    I am expecting a proper answer.
    Santosh B

    Hello Santosh,
    you need to do some self-reading on the following topic
    Updates in the SAP System (BC-CST-UP)
    http://help.sap.com/saphelp_47x200/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/frameset.htm
    Regards,
    Siddhesh

  • SAP standard program  to delimits infotypes

    Hi folks,
           Is there any SAP standard program to <u><b>delimits</b></u> the records in HR? I mean for PA/PD infotype. Or I need to write one? I have to delimits some of the IT`s Like 194 and 185...
    I found the following program to <b>delimit</b> …
    RPU204M0                       IT 204: delimit report for FA customers                     
    RPU510J1                       Utility program to delimit P0008 after pay sclae re-creation
    Thanks

    Hi Saquib
    There is one standard report called RHGRENZ2 which will delimt PD infotypes...
    The report only delimits infotypes with time constraint 2 and 3. Infotypes with time constraint 0 and 1 must be delimited using the report Delimit Objects (RHGRENZ0).
    Hi I don't see any Standard SAP program to delimit the infotypes that were specified in your message. I believe you may need to write small BDC program to delimit....
    Thanks
    Thanks
    Suresh B Mannem
    Message was edited by: Suresh Babu  Mannem

  • How to Debug SAP standard Program SAPMM07I

    Hi All
    Please tell how to debug an SAP Standard Program for  MI07 T-code.
    In this Transaction I would like to change the  Unit of Measure filed  to Alternate Unit.
    Please, Help me out .. how to debug this program and how to change this field.
    Thank you
    Prasead K

    Hi Myline
    Thanks for your reply. My Issue is that I would like to Diplay  "Difference Qty" VM07I-DIFMG and Base Unit
    of Measure (ISEG-MEINS) in MI07 Tcode as Unit of Issue (MARM-AUSME) which is defined on Material Master Plant Data View.
    Till Now, I did is I copied MI07 Standard Program SAPMM07I to ZSAPMM07I. And Assigned this  Z program to MI07 in SE93. Now, I need to make modifcation in this Zprogram such that I display: Unit of Issue  and Difference Qty fields on MI07 instead of Base unit of Measure.
    Here, Base unit of measure is  EA and Unit of Issue in ICS (Imperial Cases).  IN MI04 we enter in ICS(unit of Issue.. which is converted to EA. and MI01 its in EA. (Base unit of Measure).
    Please if this not clear.. please let me know.
    Waiting for your reply.
    Thanks once again.. !
    Prasead K
    Edited by: Prasead K on Feb 19, 2008 9:15 AM

  • Modification in SAP standard programs.

    Hi All
    I am trying to make modification in SAP standard program by using a copy of code from the original program to my program..but facing many errors like the statement BEgin of block syntax is wrong..
    i am trying to mdify the foloowing program--RFSSLD00...
    Please help me and guide to make changes to this prog..
    Also tell me that do we need to again create all the functiongroup and global data declarartion part.
    thank u.

    hi,
    Please note that when you copy a standard Sap Program ,make sure all the objects are copied following your compays naming conventions.
    Now RFSSLD00 can be copied without any difficuly.after that compare the new copied program with the standard program. going to version mngmt->remote comparison . doing this you can get the differences
    check all the includes.. and type pool declartaion and gui status etc....by going to se80
    regards,
    Safel

  • Consolidation deletes values with the Flow_Type property "OPENING"

    Hello all,
    We have set up journals to populate a DataSrc dimension value with the following properties:
    COPYOPENING - BLANK
    DATASRC_TYPE - M
    IS_CONSOL - BLANK
    IS_CONVERTED - BLANK
    In other words, we do not do not want values in this data source to be picked up or in any way manipulated when we execute Consolidation (Stored Prodcedures SPCOPYOPENING, SPRUNCONVERSION,SPRUNCONSO).
    However whenever we execute consolidation the system delete some values in the above mentioned datasrc. Open further investigation, it seems to only delete values where the flow dimension value has the FLOW_TYPE - OPENING.
    Have you by any chance encountered this issue? Or do you have any ideas why this could occur?
    Thank you & regards
    Raja

    When I look to the SAP BPC MS V7.0 starter kit, I find the following differences :
    - they use NETVAR to the Variation flow
    - they call the Flow_type for CTA "TRANSDIF"
    - there is no TRANSLOPE
    I hope it helps

  • How to delete value in the header line of itab

    dear all,
    i have create an internal table.
    i would like to delete value of the header line after have used read table to read the contents.
    how can i do it ?

    If your internal table is something like this:
    data: begin of i_mara occurs 0.
    include structure mara.
    data: end of i_mara.
    That clears the matnr field of the header line...
    CLEAR i_mara-matnr.

Maybe you are looking for

  • How do i open a pdf file that say's i do not have permission to open it when i created it ?

    hi my hard drive died and i have replaced it but now i have transfered the files back to my computer but it will not let me open them it tells me i do not have permission to open them what do i do ?

  • GR Based Invoice Verifcation indicator

    Hello All, In the PO GR based Iv indicator is set. It is not selected in Vendor master and InfoRecord. Can anyone expalin the possibility of the indicator set. Thanks

  • Help using a created type

    Anyone, I started by creating a typelike this: create type NUMS_TYP as object (nums number); That seemed to work fine. Now I'm trying to use that type in a PL/SQL procedure like this: FOR z IN (select empno from emp) LOOP IF z.empno IS OF (NUMS_TYP)

  • Mac disk error with Halo Universal and QT7.2

    This is not a question, but a means of posting a problem for Apple and others to see: 1) Halo Universal (original and 2.0.2 upgrade) will always create a "volume header error" on my hard drive whenever a checkpoint is reach. This error is found with

  • Ps elements 11 and canoscan fs-4000us scanner

    I'm trying to use my canoscan fs-4000us scanner to scan old dias but ps elements does not show my scanner in the "importation" box. it shows only wia extension.