What is setting for the depreciation calculate on the basis of assets value date

Hi ,
My client requirement to calculate the assets depreciation on the basis of assets value date,
every assets transaction will have take base assets value date
Acquision 1 Assets value date 1.4.2014
transfer Assets value date 15.3.2014
Wbs settlement Assets value date 20 .3.2014
second acquisition Assets value date 28.03.2014
if anybody know about the setting ,Please provide me important setting ,

Any setting related to assets posting variant ? to calculate if anybody know the setting please inform.

Similar Messages

I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

You can't "accidentally" put a passcode on any iPhone...its a multi-step process. Further, restoring an iPhone will remove the passcode, as the passcode is not included in an iPhone backup.
Are you sure you're talking about the phone passcode & not something else...like the "Restrictions" passcode?

I can't save the setting for dowloads to go to the specified folder (such as the desktop). It restores to default when I close Forefox.

I can't save the setting for downloads to go to the specified folder (such as the desktop). It works once but it restores to default next time I open Firefox.
== This happened ==
Every time Firefox opened

Make sure that you not run Firefox in [[Private Browsing]] mode.
In Private Browsing mode some menu items are disabled (grayed) and some features like visited links and others are disabled and not working.
You are in Private Browsing mode if you see "Tools > Stop Private Browsing".
See [[Private Browsing]] and http://kb.mozillazine.org/Issues_related_to_Private_Browsing
See also http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]

Is it possible to create an EQ setting (manual) in iTunes that can be stored on an iPod nano as an addition to the 22 EQ onpresets? I want to use a manual setting for my headphones without applying the setting to each song.

Hi. Is it possible to create an EQ setting (manual) in iTunes that can be stored on an ipod nano as an addition to the 22 EQ presets? I want to use a manual setting for my headphones without applying the EQ to all the individual songs. I'd use a different EQ for my dock.
Thanks.
Paul St

A quick look at the DM1 site shows that it works with Audiocopy.

Is there a setting for iphone 4 to have the screen dim to black while on a call?

is there a setting for iphone 4 to have the screen dim to black while on a call?

If you put the phone to your ear, the proximity sensor darkens the display automatically. If you are just holding the phone in your hand or something similar, the proximity sensor is not activated.

Setting for 'status of AuC' in the definition of the asset class

where should i check the setting for 'status of AuC' in the definition of the asset class

Dear Gajanan,
Create asset class in OAOA. Assign account determination & screen layout, number range.
You have a section down as Status of AUC. Select the second radio button of "Line item Settlement"
Regards,
Ajay

Different Asset value dates for different depreciation areas

Hi All
I have a requirement for different capitalization dates in different depreciation areas for some LATAM countries .How can this be achieved?

Hi
Hope you can achive this requirement by entering Depreciation calculation start date in depreciation area tab of asset master against each depreciation area
Depreciation calculation start date
'As a general rule, the system determines the depreciation start date from the asset value date of the first acquisition posting. However, you can also manually enter a calendar date in the asset master record for the start of depreciation. In that case, the system ignores the asset value date of the acquisition posting.'
Please check different scenarios in development system and then do it
Regards
Praveen PC

Setting the Asset Value date as the dep start date

Hi,
I need to pick depreciation from the asset value date and NOT the dep start date in the asset master record. Is this possible? IF it is, then what config changes needs to be done.
Thanks

Hi
You can define that in the multi level method assigned to your depreciation key.
Assign points if the information is useful to you
Regards
Sanil Bhandari

Asset value date at the asset posting when using F-90

Hi,
I have an asset and the first acquisition date was 10.30.2009.
I'm using the transaction F-90 (external aquisition with vendor) with posting key 50 for credit entry, 70 for debit asset and the transaction type is 100.
Why the asset value date at the asset posting is equal first acquisition date (10.30.2009)? If I'm posting 12.17.2009 the asse value date woudn't be 12.17.2009?
Regards.

Hi
The first Acquisition Date will be the Asset Value date.
When ever you going to do more Acquisitions they will be added on to that Acquisition Amount but on the Particular Dates of Acquisitions and Asset Value Date will remain the same as First Acquisition date.
Whether you do Acquisitions using F-90 or through Settlements, the Asset Value Date will be the 1st Acquisition Date.
regards
Venkat

Different Asset Value Dates for each Asset

Hi,
A very interesting and unique requirement.
We are attaching multiple assets in the settlement rule of wbs elements and run CJ88, but as per standard SAP, all assets under each WBS Element are capitalized on the same Asset Value Date.
My client wants to capitalize assets at different asset value dates for each of these assets without needing to run CJ88 multiple times.In CJ88, however, we have only one asset Vale date option.
Is this possible to have different asset value dates asset wise when we run CJ88 ? I did not find any option to define an asset value date in CJIC either.In Settlement rule neither.
Thanks for any help.
Regards,
Manis

Try and explore the option of using Asset Value date on the sender WBS, you can find this under settlement parameters.
This option depends on your project (WBS) strcture and the number of assets being capitalised on back on one WBS element.
Refer note OSS 98496 for more information
Regards
Sreenivas

What paper setting for iron on transfer on Office Jet pro 8600

I don't know what paper setting to use for iron on transfers.
I have also noticed compared to my other printers, colors come out faded not vibrant.
BLACK is more of a charcoal! I'm ready to take this machine back.
I select premium hp photo paper because I want to use most dpi. It is still faded.
However there is not a listing for "Iron on Transfer" paper.
HELP!!!!!

Hi,
This is extracted from page #32 of its manual:
Have both special media (such as transparencies or letterhead) and plain paper loaded in the trays.
+ Load special media in Tray 1 and plain paper in Tray 2.
+ Make sure the default tray is set to Tray 2.
+ Make sure tray lock is set to Tray 1.
Confusing isn't it !
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

What Sequence Setting for 4:3 Aspect Ratio?

Just moved up from FCE to FCS2. Do commercials for small market cable and broadcast in SD 4:3 in FCE. Now in FCP I see a sequence setting for Frame Size Aspect Ratio NTSC DV that shows 3:2 aspect. Not really clear on what this is and after pouring through the manuals and searching this forum, still don't get it.
In the end, I want normal SD 4:3 TV commercials. In FCE, it was a simple NTSC setting. Does my sequence in FCP need to be 4:3 or 3:2? Need a little education on this and can't find any explanation anywhere.
Thanks for the help.

What format is your source? I would never export out of FCP in that manner to achieve a frame rate conversion.
There are a couple of ways to change your footage from 23.98 to 29.97. The easiest I feel, is to select all the clips in your 23.98 sequence using CMD+A. Then copy (CMD+C),create a new 29.97 sequence and paste (CMD+V) those clips into your new sequence. Render and export a Quicktime Movie, Self-Contained.
However, I'm curious if you're shooting in HD based on your 23.98 frame rate. If you are, then you should be using a better SD sequence than DV which is 4:1:1 color sub-sampling. You may be throwing away half of your color information by working in that format.
Andy
Andy:
Using your method of copy/paste to a new 29.98 sequence solved the problem. Thanks.
What I had done to try out the new features in FCP vs. FCE was to create a 23.98 timeline (since I am shooting in SD 24pa with a DVX100A), add a Motion Master Template, add a few jpg's to the drop zones, add 3 NTSC-formatted jpg's to the end for the logos, add a Soundtrack music bed.
For future commercials, will likely be shooting 24pa footage, so wanted to figure out working in a 23.98 sequence. Just had not understood how to get it back to 29.98 for the cable company and broadcast stations. Your advice (copy to new sequence) makes it simple. Hopefully based on this info, I am still on the right track to accomplish my goal. I want to get the 24p look for some clients, but deliver the finished spots via upload to the stations' servers in a QT MOV.
If you have any other advice that would improve things, ready, willing and able to listen. Been Mac-ing since Mac Plus days, but new to FCP. Made the switch from Express with the access to 24p shooting. Thanks.
Message was edited by: Neil Whittey

What is timeout for messaging server waiting on the 220 banner

May I know what the timeout is for messaging server waiting on the 220 banner during the first attempt? Thanks.

YY_MM wrote:
May I know what the timeout is for messaging server waiting on the 220 banner during the first attempt? Thanks.As you didn't provide the version of Messaging Server you are using, I can only point you to the values for the latest version (6.3):
http://docs.sun.com/app/docs/doc/819-4429/acmkh?a=view
STATUS_MAIL_RECEIVE_TIME (Integer) : Specifies, in minutes, how long to wait to receive the SMTP response to a sent MAIL FROM command. (Also corresponds to the time we wait for the initial banner line, and the time to wait to receive a response to a HELO, EHLO, or RSET command.) The default is 10.
Regards,
Shane.

HT4587 what about set up apple tv using airport express base without WIFI connection

How to set up Apple tv on my tv using airport express base without internet connection

In theory you can configure the AirPort Express to broadcast a Wi-Fi network that the Apple TV can connect to. The default configuration of the Express is to broadcast an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN. You would then configure the Apple TV to connect to this network.

Can not change the control level of item attribute "Inventory Asset Value"

I can not change the control level of the item attribute "Inventory Asset Value" from Master Level to Org Level. It's show me the message "FRM-40200: Field is protected against update".
Version is below:
Oracle Application: 10.7SC
Form: INVIDCTL 6.0.26

I did a trace when I chage the control level. the SQL is below:
SELECT COUNT(*)
FROM CST_ITEM_COSTS CHILD
, CST_ITEM_COSTS MASTER
WHERE MASTER.INVENTORY_ITEM_ID = CHILD.INVENTORY_ITEM_ID (+)
AND MASTER.COST_TYPE_ID = 1
AND CHILD.COST_TYPE_ID (+) = 1
AND NVL(MASTER.ITEM_COST,0) != NVL(CHILD.ITEM_COST (+) ,DECODE(MASTER.ITEM_COST, NULL ,0,-99999))
AND MASTER.ORGANIZATION_ID IN (SELECT MASTER_ORGANIZATION_ID
FROM MTL_PARAMETERS
WHERE ORGANIZATION_ID != MASTER_ORGANIZATION_ID )
AND CHILD.ORGANIZATION_ID IN (SELECT ORGANIZATION_ID
FROM MTL_PARAMETERS
WHERE MASTER_ORGANIZATION_ID = MASTER.ORGANIZATION_ID )

What is setting for the depreciation calculate on the basis of assets value date

Similar Messages

Maybe you are looking for