What is Settype and usage of tcode SLAPPROVER

Hi friends
what is settype and usage of tcode SLAPPROVER
SLAPPROVER means Spend Limit approver.will this be accessed only by manager or any other employees also .please let me know
Regards
Chinna

Hi Chinni,
(1)SLAPPROVER IS AN ATTRIBUTE in SRM .It is not a transaction in SRM. It Specifies the approver used in workflows based on a spending limit.
(2) r3prodstyp -This contains product subtype - view it comm_hierarchy .and you can see them when you browse product category set type tab.
check this tranasction COMM_PRAPPLCAT here product as Application mapped with R3PRODSTYP
hope it clarifies you.
regards
Muthu

Similar Messages

What is WEBELEMENTS and usage

Hi Masters,
what is webelements and how can i use webelements in Crystal report..
i did read some of the forums explaining the what is webelements but where can i find this in my crystal report?
do i need to install the Webelements?
if not where can i find and how can i use the features...
after reading the forums am really excited to use them
i have develeped a crystal report and i want to use it..can i have some input pls..
thank you,
pasala.

hi Pasala,
webelements are used to create custom parameter pages for your reports or to embed web controls on a report. they are for the dhtml viewers.
if you go to the main page [here |Crystal Reports webElements]you can find a powerpoint and a users guide that will give you more info.
if you go [here |http://experience.sap.com/experience/html/Pages/egrid/index.htm]and then click on the plant performance reporter link you can see a live demo. in this demo there is a main report that has all of the webelements controls. the controls pass the chosen values to a report in an iframe below.
cheers,
jamie

What is Purpose and Usage of "Stock Transport Order" in Purchase Order.

Sap Masters,
 I have Created One PO Order with type UD-Stock Transport Order.
 But I didn't know, How to Process in T_Code VL10B.
 Kindly, Describe What is the Usage of VL10B Transaction ? And How to Proceed
 it ?

Hi,
A number of procedures are available to enable you to transfer materials from one plant to another:
-> Stock Transfer Between Plants in One Step
-> Stock Transfer Between Plants in Two Steps
-> Stock Transport Order Without Delivery
-> Stock Transport Order with Delivery via Shipping
-> Stock Transport Order with Delivery and Billing Document/Invoice
In Purchasing, you can request and monitor a stock transfer with a:
-> Stock transfer order
-> Purchase requisition
-> Scheduling agreement
When a stock transfer involves two company codes and the issuing of a bill, you do not create a stock transport order but a standard purchase order
(see also Cross-Company Stock Transfer).
Where to find information about this?: See SAP-Library
-> MM
-> IM (inventory mgt)
-> managing special stocks
-> stock transfer in purchasing
Best regards
FSA

HT4623 I'm an iphone virgin (so please excuse my stupid question if that is what it transpires to be) but when I try to update my iphone 3GS when I go into SETTINGS GENERAL my display reads ABOUT and USAGE but has nothing about software upgrade in between

Help, I've just bought a second hand iphone (my first ever) but when i try to get any apps it tells me i require ios4.3 but wen i try to update it I seeem to be missing a catorgory inbetween about and usage i should have software upgrade so i've been told i'm learning as I go lol but i have set up an itunes acc and i cant put apps on that way either has anyone come across this and a friend looked at it and said check its not been jailbreak/broked I have no idea what this means or how to check for it is it reversable any help is appreciated as i'm slowly losing the will to live lol many thanx in advance. oh I think it is a 3gs or a 3 but deff no newer cheers

Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About?

"3265 du process" appears and disappears and occupies a lot of CPU System usage: what is that and how to remove that unknown process

Opening the utility "activity monitor", I see a process that appears and disappears, called 3265 "du" process. It occupies a lot of CPU % system (the red one in the mac activity monitor utility). Anyone knows what's that and how can I remove it?
Probably the same issue of this discussion: https://discussions.apple.com/thread/1968751?start=0&tstart=0
But no idea about how to solve it!

BSD General Commands Manual
du -- display disk usage statistics
The du utility displays the file system block usage for each file argu-
     ment and for each directory in the file hierarchy rooted in each direc-
     tory argument. If no file is specified, the block usage of the hierarchy
     rooted in the current directory is displayed.
To see for yourself use Terminal program enter: man du
press enter (to see the manual for "du")

What is "other" under usage data and how do I get rid of it?

I was recently given a used iPad 3rd generation 16GB A1416 with IOS 7.1.2. I set up my own Apple ID and then I deleted all existing apps, photos, movies, messages, reminders, etc to make room in storage and then downloaded 4 new apps for my granddaughter that total about 1.7GB. Usage data shows that I now only have approximately 4GB left. When I sync to iTunes to view usage info online it shows the 1.7GB used for apps and it then shows approximately 7.7
GB under "other." What is OTHER and how do I delete it? This is my first Apple product and my first tablet so I really need a little help here. Thanks for any info you can supply.

iPhone, iPad, and iPod: Understanding capacity
http://support.apple.com/kb/ht1867
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
What is Stored in iCloud and What is Not
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/what-is-s tored-in-icloud
 Cheers, Tom

How do you know what the data usage was for and why? It shows you date and usage but not the reason.

How can you see what data usage was for on the bill? It only shows the date and usage but not the reason for the usage.

You can not see this info on VZW's site. There are apps for smartphones that will break down the info though, but by site or what was downloaded

My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for? Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?

My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for?
Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?
I do not have any VPN enabled?

Do you happen to have an Android? If so and depending on what version there is a great data usage analyse tool built-in. See if you can go to Settings -> Data Usage from there you can pick a current or previous billing cycle and then use the vertical sliders to select a date range and it will filter the usage data per app to show you exactly what app(s) were using data during that time frame.

I have an iphone 4 8gig there is 2.4 gig of "other" showing on my usage which is more than all oter data on the phone. What is it and how do I delete some to clear space?

I have an iphone 4 8gig there is 2.4 gig of "other" showing on my usage which is more than all other data on the phone. What is it and how do I delete some to clear space?

Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

What are the main sap script events and their functionality and usage?

what are the main sap script events and their functionality and usage?

Hi,
Inside the Script, there are events like Top of Page, End of page etc.
Please elaborate about your requirement.
Best regards,
Prashant

What to do if usage=stanby and forced app stop does'n work?

What to do if usage=standby and forced app stop doesn't work?

thanks for your answers.
I only saw them now; at the time you posted I had already tried to reboot.
as anticipated, it did not work. however, it provided me with a very interesting evening with a liveCD.
the problem was: the kernel does not like the partition table to change and will ignore any changes until the next reboot ("hdparm -z /dev/sda", i.e. forcing the kernel to see reason and to accept the new partition table did not work) ... which means when I re-mkfs'ed the boot partition it used the old partition table and on reboot partition table and filesystem were inconsistent. jackpot.
so i reformated the partition table another time from a chroot environment. this time grub-install ran cleanly. however it also deleted my kernel. not very nice. i do not really know why or how, the only way i can make sense of it is that it completely deletes the /boot partition. no idea why? it was not really a problem because I still had the backup of the boot partition; but at that point I was convinced that grub2 is a desaster in any possible way.
it took me another 30 minutes to figure out how grub-mkconfig puts the grub2 config together ... and another 30 minutes to figure out that the contents of /etc/grub.d/ are ignored if they are not executable (chmod +x)
finally it appears the device naming convention has changed from (hd0,0) in grub to 'hd0,msdos1' in grub2 for which I also fail to see a good reason.
a couple of hours later my system feels and looks still very messy but I got it up and running again...
thanks, ataraxia & WonderWoofie, for your ideas; good night.

Whats is the use of SM64 Tcode?? and about Trigger Event???

Hi
Whats is the use of SM64 Tcode?? and about Trigger Event???
Can anyone tell me??
Thanks & Regards
Senthil

Hi,
When scheduling a background job, you can specify it to start "after event".
If you do so, you'll have to create an event in SM62.
If a job is scheduled after event event and you trigger the event with SM64, the job will start.
Events can be raised by external systems in SAP by sending a command to a SAP application server. You can also raise event in any program using function mosule BP_EVENT_RAISE.
hope this helps....
Olivier.

What to do about diagnostic and usage reports. I have crash reports and low memory?

I just recently got my iPhone 4S and I'm still learning and going through everything and ran into the diagnostic and usage reports low memory and crash reports what do I do from here?

You do not have to do anything.
They will automatic send to Apple for diagnostic.
It's not meant for consumers to read.

In itunes my usage bar shows 90% by something called "other" what is this and how do i clean it up?

in itunes it shows my ipad has OTHER taking 90% of my machine.
what is this and how do i clean it up?

Call 1800myapple

How to track usage of tcodes for a particular Login id

*Hi experts,*
*Kindly tell me how to track the usage of transactions for a particular Login Id. Is there any tcode from which we can get the report for the same? If suppose 100 tcodes has been assigned to a particualr Login Id, I have to confirm whether in the last month have the users executed all the tcodes assigned to them or not.*
*Kindly revert for the same.*
*Thanks & Regards,*
*RESHMA*

Reshma,
The first thing you have to consider is why the tcode is in the role at first place, conventional wisdom is - Role was identified, its functions were identified (or the other way around) and then corresponding tcodes were identified to perform those functions and then role was updated with these tcodes. Now rather than approaching it through the frequency of tcode use, you shoudl revisit the business process or function and evaluate if it is still required in the role. Depending upon this requirement, you should reevaluate your role design. Usually you should just prepare the role-to-tcode matrix and have the business/Function review it periodically.
going by frequency can be misleading, I will give you a scenario - what if the user executes a tcode only once a quarter or 6 months or a year, with rest of the time the function is performed by junior staff or some other team member through a different role. So best practice I can suggest is to review the role-tcode matrix.
You can however check the frequency using Audit Logs in Sm18-20 as mentioned by Vikas above. These are pretty easy to configure but size of logs can get unmanageable depending upon filters.
Regards,
Shivraj

What is Settype and usage of tcode SLAPPROVER

Similar Messages

Maybe you are looking for