What is shop floor paper ?

Hi,
Can someone explain in simple statement what is meant by a Shop floor paper in PP module ? An abaper is expected to change its layout and users can print it. Which programs are involved in sapscript ? What kind of changes are normally expected in the shop floor layout ?Thru which transaction I can print and verify the shop floor papers (like PO thru ME21N).
Would highly appreciate if u can answer straight rather than sending me links.
thanks

http://www.sap.com/industries/chemicals/pdf/BWP_SB_Manufacturing_Intelligence_Dashboards.pdf
http://www.honeycombconnect.com/downloads/PILS/OTE/13_12_06WhitePaper.pdf
Regards.

Similar Messages

  • Shop floor paper printing

    Hi Team,
    I am new to use the transaction OPK8. I need to configure to print production order details for shop floor paper printing.
    How to use this transaction to print shop floor papers as per our requirement?
    I need to print some BOM component details and kanban control cycle informations (eg: storage bin) in the shop floor papers. Is these informations available by default in OPK8 transaction?
    I am beginner to use this transaction. So your valuable guidenace required.
    Thanks
    psk

    Hi chandan
    Priniting layout can be set on your for printing shop floor paper. The required field can be set from production.
    Regards
    J . Saravan

  • Production Schedule Profile & shop floor paper printing.....

    Hi there ,
                   If we set the Execute Printing checkbox in the T-code <b>CORY</b>for a production scehedule profile....... then when we will release the order along with the other shop floor paper do the Transfer Order will also get printed if the material is warehouse managed.........
    Please enlighten me .....
    Thanks & Regards
    Kaushik

    Hi there ,
                   Thanks for your reply...... I am aware of the fact that the shop floor paper will be printed once the order is relased & the relevant config is done in the Production schedule Profile.........
    But in case of the material which are warehouse managed the Transfer requirement will be created & the further the Transfer Order........... I wan tto know that these will also Print the Transfer Order doucment for the warehouse managed material .......
    Thanks & Regards
    Kaushik

  • Status updation of Shop floor paper

    Hi expert
       I have created one Shop floor printout in Smart forms.i have created my own program.In the statndard printout
      status will be changed to PRT when the print out taken.I want to in coperate this feature in my program also.
    Please guide me
    Regards
    Manoj

    All configurations are maintained properly in OPK8. The print program has been changed to SAPSprint.
    Possible reasons or troubleshooting tips would be helpful.
    Jibitesh

  • Incorrect sequence of shop floor paper after upgrade

    Hi All,
    We had an upgrade from 4.7 to ECC6 and we have a problem with shop paper printing for Production orders. The sequence of shop papers doesn't follow the sequence defined in configuration. e.g. Pick List gets printed before Operation list even though the configuration is otherwise.
    What could be the possible reasons and solutions for such an issue?
    Regards,
    Jibitesh

    All configurations are maintained properly in OPK8. The print program has been changed to SAPSprint.
    Possible reasons or troubleshooting tips would be helpful.
    Jibitesh

  • Shop floor Printing

    I have made print setting in opk8 and it is working fine with one material , one order typeand one production order, where I can see preview of shop floor paper.
    But when i make production order with same material ,  order type and same plant. Then iam not able to get print privew (when i press print option in menu FUNCTION.
    I get message After the next update the order will be printed.

    In my question , I hav mentioned that for same plant, same material, same and same order type, for one production order I can view print preview in CO02, co04 serveral times
    But  for other prodcution order, for same plant, same material, same and same order type iam not able to see print preview  in co02 or co04. In that case, everytime i get message -After the next update the order will be printed

  • Shop floor with w/o no in PM module

    Hi All,
    Can you please explain me in understanding the **standard functionality** of Shop floor paper with W/O# in PM module.If possible please share document.
    Regards,
    Meghana

    I guess, you are looking for smart forms which can be prepared from Maintenance order.
    First in IMG, we need to define the shop papers which are going to be used for the order.
    IMG => PM & CS => Maintenance & service processing => Maintenance & service orders => Print control
    Under that, you can define the shop papers. Also custom shop papers can be added in that list.
    Apart from that, based on order type, shop papers can be restricted. Based on user as well, shop paper can be restricted.
    http://help.sap.com/saphelp_sm32/helpdata/en/32/da2e88713c11d58cd90000e8284931/frameset.htm

  • What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

    Hi All,
    Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
    Thanks

    Hi Surya,
    Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
    1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
    From Shop floor:
    shop floor --> SAP MII --> ECC
    1. Use either Web service or fetch data from DB and pass data to BAPI's  for sending to ECC through BLS transaction.
    Regards,
    Praveen Reddy

  • What is demand planning and shop floor plannig, explain briefly?

    I like to know and understand about demand planning and shop floor plaining? please explain briefly?
    Thank you,
    york

    Hi Les,
    <b>Demand Planning</b> is
    Application component in the Advanced Planner and Optimizer (APO) that allows you to forecast market demand for your company's products and produce a demand plan.
    APO Demand Planning has a data mart in which you store and maintain the information necessary for the demand planning process in your company. Using this information along with user-defined planning layouts and interactive planning books, you can integrate people from different departments into the forecasting process. The APO DP library of statistical forecasting and advanced macro techniques allows you to create forecasts based on demand history as well as any number of causal factors, and use a consensus-based approach to consolidate the results. Marketing intelligence and management adjustments can be added by using forecast overrides and promotions. The seamless integration with APO Supply Network Planning supports an efficient S&OP process.
    regards
    kp

  • What is SAP Shop floor Licenses .

    SAP Shop floor Licenses

    Hello Sheena,
    There is no specific authorization nor role for this, just a transaction and an attribute. Maintain the attribute requester and populate it with user name (starting with "US") or node from the org. structure (O 50000061).
    The "shop for" field is avaible in the the transaction BBPSC01 (Shopping Cart - Full Functionality).
    Rgds,
    Pierre

  • Open item in PS reporting for shop floor order (same as PO's or PR's)

    Hi Guys,
    I have a question simple but I could till now find any solution in standard Report Writer or in Report Painter and I donu2019t want to create a specific report with an ABAP.
    In the system we have set quit complex projects with WBS, Networks and Activities. In each project there are also material which are standard material consumed from collective stock and specific material produced internally or purchased externally. The specific material are consumed through specific stock project.
    In Report Painter/Writer there are ratios for the open line items for purchase orders or requisitions but I am not able to find the same values for the shop floor orders made internally. Further I get the values for the planned shop floor orders and of course the complete actual (coming from both requirements) but I will know what are the values which are between (nat yet actual and plan).
    Has anybody already faced this situation or do anyone the solution to my problem?
    I thank you for your replies.
    Best regards

    Hi
    Please use table EKAB for your search instead of using EBAN Or EKKO
    Thanks & Regards
    Kishore

  • SFDM Tool (Shop Floor Dispatching and Monitoring), Technical questions

    Hi Everybody,
    i am very excited to change knowledge here on the SCN.
    Right now I am analyzing the SFDM Tool (Shop Floor Dispatching and Monitoring) and need some more Information, which cannot be found via Internet research. I hope someone, who is familiar with the technical details can support me with answers.
    1. Master Data:
    - How does the Interchange of master data (such as machine capacities in terms of time/quantities or number of available machines) work between the       SFDM and the ERP System?
    - Is there a permanent interface between the SFDM and the master data in the ERP System?
    - If so, which of the master data are communicated?
    - Are there any limitations?
    - Do BAPIs (Business Application Programming Interface) play a role?
    - Is any further master data maintenance necessary, if the customer wants to implement SFDM?
    2. There is a backend component situated in the ERP System called "SFDM on ABAP 1.0". What is the aim of this component?
    3. Does the SFDM work with algorithms? If so, why?
    4. Does the SFDM consider other machines in the same production plant?
    5. Does it work over HANA?
    6. Any further functionalities or restrictions?

    Hi
    i wouldn't recommend SFDM for performance problem solving, if this is the issue you are facing.
    If this is because planners are "lost" with CM25 because of problems for Production Orders selection and so-on, then try SFDM.
    There is no new functionality compared to CM2x transactions within ERP.
    The benefits are clearly focused on design and user-friendliness:
    interactive logs
    easy configuration of settings and strategy compared to CM2x TCodes
    accessible details
    Please keep also in mind the fact that this is working for individual capacities (cf. Rough Guide) and related constraints in terms of capacity category (only 0001 is supported).
    Best regards.
    Pierre-Edouard

  • Want to create inspection lots during In-House production (shop floor)

    Hello,
    As per our requirement we need to inspect a material multiple times (3-4 times) during shop floor production. It means we want to check a material say after operation 30, 50, 70 and 110 (of routing). We don't want to start operation 50 unless inspection of material after operation 30 is over. We don't want to start operation 70 unless inspection of material after operation 50 is over and so on.
    How can we attain this? We have assigned inspection type 03 in material master - quality management. We have assigned various MICs in concerned operations. Inspection lot is getting generated as soon as the release of production order takes place and it contains all MICs (and operations). We are able to make the result recording and defect recording for all operations at the beginning only.
    Is it possible to create multiple inspection lots for these operations and is it [possible to restrict the confirmation of later operation unless inspection of previous operation is over i.e. a usage decision is already carried out for previous operation.
    Puneet

    hi puneet,
    can u please let me know  what miracle u didi to resolve this issue?
    Thanks
    raghav

  • Material on shop floor

    Hi Experts,
    I want track the material lying on shop floor, Please look at the below scenario.
    For Finished Material  A(100 kg) Raw material X (120 kg) required as per Bom
    Production order Quantity for 200
    GI quantity for Order 240 kg, Confirmed Quantity 100 Kg
    So, 120 kg of Raw material lying on the floor, How to build the logic for this.
    Regards,
    Sudhakar.

    Hi Sudhakar,
                        As i understand there can be 2 simple situations of excess material issued
    1. your planned GI for raw material was 240 and you did the same but later on you found that your final yield of header material (finished) and GR was 100. So, you have used more raw material but did not get finished material enough to justify which will refelct in variances.
    2. The other situation is what you may be having where stores issued 240 but you actually used only 120 to produce 100 finished good. You can simply do a return delivery in MIGO against that document number and selecting the particular raw material for 120 kg. 120 kg raw material will then be reversed through 262 movement which will reflect in material movemnt reports.
    Regards
    Sm.

  • Printing Shop floor documents

    Hello Experts,
    Is it possible to print the shop floor documents in production order status CRTD ?
    If yes what are the settings to be done to get printing before releasing the order?
    Regards,
    Jejesh
    Edited by: jejesh yal on Jan 27, 2009 6:47 AM

    Hi,
    As per Standard SAP Practice, It is not possible to print shop floor papers befere release of Production Order i.e. It must have status REL and not CRTD.
    You need to maintain following settings for Printing Shop Floor Papers :
    In OPK8
    Name of the list - LG01, LG03, LK02, LV02
    Spool parameters - User and plant = *
    Reference operation - type - *, ref order = your order type
    Forms -
    LG01 - PSFC_OBJECT-LIST
    LG03 - PSFC_ZUGL-LIST
    LK02 - PSFC_GOOD-ISS-SL
    LV02 - PSFC_CONF-TICKET
    Print Programme -
    LG01 - PPPROBJU
    LG03 - PPPRZUGL
    LK02 - PPPRWARS
    LV02 - PPPRRUEC
    List control for transaction
    ref order type, plant, MRP controller-*
    transaction codes - CO01, CO02, CO03, CO04, CO05, CO07
    Flow control for transaction - all are online
    Hope this helps.
    Regards,
    Tejas
    Edited by: Tejas  Pujara on Jan 27, 2009 6:55 AM

Maybe you are looking for

  • How can I transfer songs from another account to mine?

    I used to share an account with my dad so all of my songs are on there. How do I get them to my account? Please help!

  • DVD+RW is "locked"?

    I want to burn files to a DVD+RW on which I have previously recorded films/TV progs etc. I have formatted the DVD in my ordinary DVD recorder. I've put the DVD+RW in my Superdrive but when I try to copy files from my desktop to the DVD+RW I am told t

  • Simple way to insert data from one table

    Hi, I need to know a simple way on how to transfer the data from one table to another.... First table xx_inv_tab1 has three columns col1, col2, col3 and where as second table xx_inv_tab2 has five columns col1, col2, col3, col4, col5. Here col2, col3,

  • Selection printing not printing correctly.

    Every time I try do Selection printing, it doesn't print the content correctly. It will print all the pages for the web page blank and print the highlighted content where it belong in the pages. Before it would print just the selected content and not

  • Where are the "Reminders" reminders kept on Mac?

    Today I was going through the Reminders application on my Mac and decided to delete the default Reminders list and make some new ones. What I hadn't expected was for the "Completed" list, which has many dates and such that I like to refer to, to dele