What is SLA in Plant Maintenance perspective ?

hi
it is Service level agreement between the vendor and the buyer or customer and seller respective of the service provided by the company
regards
thyagarajan

Similar Messages

What is IBAU in Plant Maintenance??

Dear Friends,
Please do let me know what is IBAU in the context of Plant Maintenance in SAP.
Regards,
Alok.

Dear Alok,
Assemblies are not plant-specific. They are considered design/phantom/grouping type of materials. They aren't physical materials but rather a grouping of physical materials.
The idea is that you create an IBAU for each of these "groupings" of parts then you create a material BOM (or rather a maintenance assembly BOM) in CS01 like you would normally do for a typical material BOM except that the parent or source material is your new IBAU.
Next you would create an equipment BOM where you would add your IBAU as a component of that equipment BOM. Since maintenance assemblies (aka IBAUs) are not plant-specific you must add the IBAU to the equipment BOM as a PM Structure Element (BOM Item Category of "I").
If you want to go the route of using construction type then the idea here is that you would create a material BOM similar to the equipment BOM. The difference is that instead of an equipment BOM pointing to material BOMs you would have a material BOM pointing to other material BOMs where the master material of this whole BOM strcuture is actually a material representation of the equipment.
For example, let's say you have 5 pumps with identical BOM structures. You would create a material called PUMP then proceed to create the BOM structure for a typical pump. After this you would create your 5 pumps as equipment and assign them a construction type of the PUMP material. In this way your equipment will now inherit the PUMP BOM structure.
The benefit/drawback to using construction type is that your BOM structure remains the same for all equipments using that PUMP construction type.
Regards,
Naveen.

What is the use of service entry sheet in plant maintenance module.

Hi Expert,
I want know about, What is the use of service entry sheet in plant maintenance?
Regards,
Ram Rathode

Hi dear,
Service entry sheet concept is used in all the modules.
Service entry sheet is created to do the service confirmation and to pay the vendor for the services which he has performed.
Based on the service entry sheet invoice is booked by Finance.

What are the steps to configure Fund Management in Plant Maintenance

Hi Friends,
while creating Plant Maintenance order through T code iw31.
In the main menu Go to-Assisments----Fund management.
now this Fund management is in grey mode.
What are the steps i need to carry to make it active mode.
Please suggest
Thanks in advance

Dear
Ask with your Co person either they activated fund mgt. This is thier Job u can activate your order types for commitmente check at KOAB.
Ask them to look at SPRO--PUBLIC SECTOR MGT
Also at SPRO-CONTROLLING-INTERNAL ORDERS-BUDGET AND AVAILABLITY CONTROL
You also check at your OIOA.
thenna

What are the standard tables for plant maintenance in r/3

I need the list of standard tables for plant maintenance in r/3. and also
is there any way we can find the field name and table which it belongs to in r/3, based on the description of the field.

I NEED THE FIELD NAMES FOR FOLLOWING FIELDS AND CORRESPONDING TABLE NAMES
Equipment status
registration number
insurance type
insurance type description
registration date
expiry date
insurance companies
expiry date
policy number
amount insured
premium paid
created by ..so ..on
for our report in PM .. insurance data report
THANKS

What is the business packages required for "plant maintenance"

hi experts,
          i got a business requirement
             how to show the plant maintenance module with the functionalities to show in the portal
              is ther any process is there
             or business packages required
thanks and regards
bvr

hi raghu,
thanks for your reply,
1. from portal view where i have to configure the jco destinations seperatly for plantmaintanance or
          normal jco will work
2. looking the sap note 1291222 where my ecc60 should be in the sp15 lever for ea-appl-600
     and poral side bp erp 05 plant magr 20 1.0 sp15
refering this links
     http://help.sap.com/bp_bl603/BBLibrary/General/Prerequisites_Matrix_BL_EN_IN.xls
could you guide me
thanks and regards
bvr
Edited by: bvr on May 13, 2009 7:12 AM

What are the Standard Process of SAP Plant Maintenance?

Dear Experts,
Let me know the Standard Process of SAP PM? Where i can get more details about them.
Ashif Tadvi

Hi,
Hope the below links will be helpful for your requirement
Overview of Plant Maintenance (PM) - Plant Maintenance (PM) - SAP Library
Plant Maintenance (PM) - SAP Library
Regards
Varun.M

Intercompany Stock Transfer starting from Plant Maintenance

Dear SAP Experts,
We are planning to implement Intercompany Stock Transfer Process starting from Plant Maintenance side.
We would like to be able to order for maintenance work order material which belongs to different plant.
After adding such material to work order system should automatically create purchase requisition with Item Category U – Stock Transfer.
Such purchase requisition will be then converted to P.O. Then standard MM process will follow meaning on supplying plant side Delivery & Goods Issue will take place. And on receiving plant side Goods Receipt against P.O.
Can you please let me know whether there is standard process which covers what was described above especially part on Plant Maintenance side?
If there is no standard process can you please advise (propose some best practices) how we can realized such request?
Many thanks in advance.
Grzegorz

Grzegorz
From memory, with intercompany trading you need to create a PO/PR on Company A and a corresponding Sales Order on Company B.
This can be automated via MM
I would suggest you ask the question in the MM Forum..
PeteA

Urgent Issue in Plant Maintenance Module

Dear Experts,
We have requirement as described below, please give us your solutions / comments on this.
We have GTC company which is having around 800 trucks for transporting the products. I n this company we have implemented SAP Plant Maintenance Module, as we have the maintenance activities done for vehicles.
Under the same group of companies, we have PM1,PM2,PM3 companies which provide maintenance to GTC. These companies are not external to the group.
When I raise a maintenance order for a vehicle then I will mention hours of work and material that need to be used in the activity. This maintenance work / labour is provided by PM1/PM2/PM3 company.
In plant maintenance we have external service management, but that is for external vendors who provide service to GTC.
But how to handle the same with internal vendors like PM1/PM2/PM3.
Please tell me how to handle this kind of scenario.
Thanks in advance.
Nagesh

Hi,
this is a major topic and cannot be covered in a blog. Even if it can it will take a lot of time to clarify. So, first do your checks within your module. Check if u really need to treat the services from the other company as external services. You might as well create workcenters in the plants of the other companies. And make a single maintenance planning plant for all the plants in these companies. This will make a better solution technically. But think also from the perspective of the cost of this solution. Meaning, is it worth doing all the jobs such as maintaining activity prices, work centers in the other plants etc..
In general, my suggestion is include the FI and CO consultants at least in the discussion. It will b good if u can have the MM consultant also during the discussion.
Bala

Origin Object Type for Plant Maintenance Orders in Profit Center Accounting

Hi,
I want to make a selection for plant maintenance orders in transaction KE5Z, report for line items in Profit Center Accounting. When checking possible input options for the selection field Origing Object Type the system shows value 15 for Maintenance Orders. However I discovered in our system the maintenance orders are reported as Origing Object Type 03, which is Overhead Orders according to the selection list. So I cannot distinguish between overhead orders and maintenance orders in this report.
What is the cause our maintenance orders are assigned to Origin Object Type 03 in stead of 15 and what is the customizing transaction to correct this ?

Looks like, this is no longer supported. Refer to note 168004 and 102434.
Cause and prerequisites
These functions were not programmed to meet the above requirements.
As of Release 4.0, the object type is transferred directly.
Solution
Once you have implemented the advance correction. the origin object type 'Overhead cost order' (03) is assigned irrespective of what is the SCOPE for orders.
As a result of implementing this note or as of Release 4.6B, the order category distinguishes between overhead cost orders and production orders in the origin object type. In this case, the following origin object types result (as described above in 1.):
Order category 04 to 10, 40 => 04 (production order)
All other order categories => 03 (overhead cost order)
The logic that the origin object type was set depending on the object class (as described above in 2.) is no longer supported. The object class can be evaluated separately in Reporting. -
The corrections of this note refer in Release 4.0B to the corrections from Note 102434.

How to claim the insurance of equipment in sap plant maintenance

Hi,
I have a question for you, in our company with lots of equipment's. Insurance has done for some equipment's, how to claim the insurance using plant maintenance. Kindly let me know the process how to claim the insurance of an equipment.
looking for your valuable information
Thanks

mohan kumar
This is an interesting requirement - I've never seen a process to cover insurance using the PM module.
You could follow the warranty process to claim insurance.
Alternatively, talk to you Finance team to see what they recommend.
PeteA

Warranty for materials in Plant Maintenance

Hi Experts
I am trying to explore how warranty could be used for spare parts in PM. I did following and seems that it works the same way as it works for equipment . meaning that it shows a dialog box when creating Notif and order.
Step1: Create Material Master
Step 2: Create Material Serial Number (Equipment master is created in background)
Step 3: Add warranty information in equipment
Step 4: Create Notification or work order, the warranty information is displayed
My Questions is on Goods movement and benefit by using serial number. I have created 03 serial numbers (1,2 and 3) by using TX IQ01. I have two cases:
Case1: what are the benefits of serial numbers created above without activating serial numbers in Inventory management. How it helps in Plant maintenance
Case2; Assming we activate serial number mgmt in IM ( by assigning serial no profile in material master). How does the serial numbers created above (1,2 and 3 by using IQ01) tie to Inventory management serial numbers. When I receive material for a purchase order how the serial numbers are assigned and tie to serial numbers created by IQ01.
Appreciate your help. Let me know if I am not clear.
Thanks
Gaurav

thx

Catalog Interface (OCI) - Customizing for Plant Maintenance order ERP2005

Hello Experts,
we want to use the integration between SRM and ERP2005. In the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/5d/0eba5fa0084247acbb0c04cede18e8/frameset.htm">sap documentation</a>sap documentation I found the following:
'In the Customizing for Plant Maintenance and Customer Service or in the Customizing for Project Systems, you entered the required data about the catalog that you want to connect to the SAP R/3 system. You can find the corresponding IMG activities under Interface for Procurement Using External Catalogs (OCI).'
However I can`t find this IMG activities in our ERP2005 system.
What`s wrong?
Thanks in advance.
Regards
U. Wieland

Hi! Additional we had to generate the img new.
Unfortunaetly I haven`t a idee how does this work. (Our sap basis did this.)
Through the assign from catalog to order type, I think it nessary to use the pm-img-activities...
Plant Maintenance and Customer Service
->Maintenance and Service Processing
->Maintenacne and Service Oders
->Interface for Procurement Using Catalogs (OCI)

Plant Maintenance Reports & Report Writer/Painter

Has anyone ever used Report Painter or Report Writer to produce SAP Plant Maintenance Reports? If so, what was your experience in using this tool and how difficult is it to produce reports?
The report that needs to be generated is for overdue PM orders (PM09) ....these are scheduled preventive maintenance orders.
We need to be able to determine if they are completed and if they are on time. This report needs to have the flexibility to choose the following
Functional Locations
Equipment
Plant sections
Main Work Center
Basic finish date / Planned Date / Overdue date (to be determined)
Maintenance Plan
Maintenance Activity Type
Group
We need to be able to run a chart from this data to show how many PM's are behind, how many were completed on time compared to the requirements, and any other chart that would be available (i.e. pie, line, bar etc.).
Thanks
Ruthie

Hi,
the fields that you want in ur report must be available in ur operating concern data structure,,,
pls check if the characteristics and the value fields that you require is available in the data structure,,,
check KEA0 transaction..
Reward points if useful

Integration between plant maintenance & SD

Hi Friends,
I have an requirement for configure the following scenario for my clinet:
Client have around 500 trucks for transportation. They want to maintain these truck as equipments in plant maintenance.
During creation of sale order in SD, customer wants to view avialble trucks in the maintenance plant. and select the suiatable truck in sale order for transportation of material.
Request your valuable tips to configuare the same in SAP.
Thanks in advance.
Shankar

Hi Shankar,
If you have already decided to use truck as RTP material, the solution is pretty much standard....I don't see any issue in ability to view RTP stock...Have you already designed and went ahead and stuck with any specific issue in this? If not start working on it....You will see RTP stock at each customer in standard MMBE as well...absolutely no issues in this standard solution...Let me know at what point you are stock...perhaps, we can analyse the predecessor steps..
Regards

What is SLA in Plant Maintenance perspective ?

Similar Messages

Maybe you are looking for