What is source client of Solution Manager?

Hi
I wanted to apply note 990534 to configure MOZ.Can any body tell what exactly is source client of Solution Manager?
Regards
Arati

Check the below links :
What is Solution Manager?
Solution manager
/thread/384815 [original link is broken]
Is SAP Project System part of Solution Manager?
SAP Solution Manager is a centralized, robust solution management toolset that facilitates technical support for distributed systems -- with functionality that covers all key aspects of solution deployment, operation, and continuous improvement. It combines tools, content, and direct access to SAP to increase the reliability of solutions and lower total cost of ownership.
With SAP Solution Manager, you can be sure your entire SAP solution environment is performing at its maximum potential. The toolset addresses your entire IT environment, supporting SAP and non-SAP software and covering current and forthcoming SAP solutions. As part of SAP NetWeaver, SAP Solution Manager is included in the annual maintenance fee for SAP solutions.
SAP Solution Manager targets both technical and business aspects of your solutions, focusing strongly on core business processes. It supports the connection between business processes and the underlying IT infrastructure. As a result, it eases communication between your IT department and your lines of business. And it ensures that you derive the maximum benefits from your IT investments.
Check these links related to solution manager
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce89c290-0201-0010-5985-dd64605111fd
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce0b74e3-0601-0010-29a0-f2a6af98ef06
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5348ada6-0301-0010-f38f-a5076178843e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5d29d690-0201-0010-2f9f-a0f957dee385

Similar Messages

What r the limitations of solution manager

hi
What r the limitations of solution manager
thanks in advance

solution manager
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce89c290-0201-0010-5985-dd64605111fd
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce0b74e3-0601-0010-29a0-f2a6af98ef06
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5348ada6-0301-0010-f38f-a5076178843e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5d29d690-0201-0010-2f9f-a0f957dee385
What is Solution Manager?
Solution manager
/thread/384815 [original link is broken]
Is SAP Project System part of Solution Manager?
Rewards if useful..........
Minal

New Client in Solution Manager 4.0

Hi Gurus,
i need make a new client copy in Solution Manager 4.0 and I had made a entry also in SCC4 but after that entry when I am trying to login with sap* & pass in that new client.
It is not allowing me to login it is saying "wrong user or password repeat logon".
Please Help gurus... is there any change in solman on user name & password.
Thanks
Kamal

Hello Kamal,
Did you do this?
1. Create a client in SCC4
2. Log off from the system.
3. Logon to the new client with user SAP*, password PASS
4. Go to SCC3:
Source: Client 000
Source User: Client 001
Target: Your new client
Profile : SAP_ALL
Delete the profile parameter 'login/no_automatic_user_sapstar' when you have created the first user in the new client. Restart the system to make the changes effective.
See: SAP note 806819.
Best regards,
Dolores

Create new client in Solution Manager?

I finished installing Solution Manager 4.0 sp1 for the first time and have the default clients of 000, 001, and 066. I can log on with the SAP* user. I'm a little confused about the next step. Do I create an addtional client (For example, 100) just like a production or development system to use for users, RFC connections, etc.?
Or do I use one of the default clients?

Hi Carl,
As always... the golden rule applies to SOLMAN as well. Never touch the default clients. Have a client copy and then perfrom all the actions from and ON the Copied client. Get going with SCC4 for a new SOLMAN client :).. atleast thats what we follow here as a practice.
All thebest
Br,
Sri
Award points for helpful answers

What are configurations required on Solution Manager 7.0

Dear Sir,
I have asked to my Implementation Partner to implement Solution Manager with following details.
Maintenance Optimizer Configuration, Usage, Hands on and Training. Patching using Solution Manager.
a. Configuration Maintenance Optimizer
b. Installation of Software Lifecycle Manager u2013 SLM
c. Software Logistics Controller u2013 SLC
d. SLD Registration
e. Configuration for Transport Directory
f. Support Package Manager u2013 SPAM (Specially on SM)
g. Java Support Package Manager u2013 JSPM (Specially on SM)
h. Usage of MO and Demo
i. EWA Scheduling Using SM.
j. EWA Recommendations Implementation
Please let me know If I am forgeting any thing or needs to be configured for smooth running of our setup. What are thing to be configured??
Please also let me give a brief(in addition to notes) about Usage of SLC, SLM, SLD, Transport Directory and How it will help in transport management system.
Is it possible to apply patches from Solution Manager to all systems?
Regards
Dharmendra

Dharmendra,
There are many features with Solution Manager EHP1 SP 04. See if you ask them to upgrade to latest level.
Also following more features are available. Depending on your company and your requirement you could configure it.
- System Monitoring via central auto alert
- System Availability monitoring (CCMSPING)
- Central system administration
- DBA Cockpit
- CPH (Central Performance History)
- Job Management
- Project Administration
and many more things are available. Go through Link: [www.service.sap.com/solutionmanager] for more information
Thanks,
Digesh Joshi

What is Main Instance in Solution Manager

Hi all
I read many times we have Main Instances for satelite system in Solution Manager.
Actually what is it ?
Thank you
Halomoan

Hello Halomoan,
Well, I think the following should clear your doubts.
Here, I am giving you an example of creating a new system in SolMan System Landscape.
--> Goto SMSY
--> Right click on Systems from System Landscape tab select Create new system with Assistant.
--> Click on Continue.
--> Enter SID, Description, Select Product from the list and version in the following list. Enter the installation number.
--> Click on Continue. Here I am selecting SAP Solution Manager as Product and Solution Manager 4.0 as version.
Now, you will see the following list with the check boxes next to it to choose.
   SAP Solution Manager
   Plug Ins for Satellite Systems
   Solution Manager Diagnostics
   Agents for Satellite Systems
If you choose SAP Solution Manager, and    Plug Ins for Satellite Systems it will give you an error saying Only one ABAP main instance can be flagged as relevant. So, only one ABAP system it lets you choose.
Hope it helps. Let me know if you have any more questions on this.
Cheers,
Satish.

What are installations material for Solution Manager 7.0 EHP 1

hi friends,
we plan to do installing Solution Manager 7.0 ehp1,
can any help me to get the path for installation media for Solution Manager 7.0 EHP 1 in service market place.
thanks..

https://service.sap.com/swdc
-> SAP Installations and Upgrades
-> Installations and Upgrades - Entry by Application Group
-> SAP Technology Components
-> SAP SOLUTION MANAGER
-> SAP SOLUTION MANAGER 7.0 EHP 1
-> Installation and Upgrade
Also check https://service.sap.com/instguides for the install guide and SAP Note 1276022 - SAP Solution Manager 7.0 EHP1
Installation.
Nelis

Client Copy Solution Manager Enhacement Package 1

Hello solman experts!
I'm going to install SolMan EHP1 (SPS20). I'm preparing execution plan for installation. Now I have problem in step sequence.
Should I make client copy first and then run tamplates for initial configuration (from SOLMAN_SETUP)?
When I installed PI 7.1 I made client copy before template run (I checked note 1309239). But for SolMan I didn't find any information regarding SolMan client copy and template (and also SOLMAN_SETUP) sequence.
Do you have any ideas?

Make copy before customization

What is exactly a IBASE in SAP Solution manager

Dear all
I'm making the configuration of service desk on SAP Solution manager, and then i have to make a set up of IBASE. Can anyone tel me what exactly is IBASE in solution manager?
thanks
Edited by: hchabi on Apr 1, 2010 1:45 PM

Hi
In solman you have SOL_MAN_DATA_REP as main IBASE or 1 and other managed systems will be attached to it as a component.
and you can check it in IB53 by entering "1" in the initial screen
For automatic generation you can use tcode IB_GEN and all the connected systems ibase will be generated and attached to ur ibase
Morever theoretically,
An installed base can be described as a multilevel structure of installed base components for managing objects (for example, devices, machines, software) that are installed, or are going to be installed on site at the customer site. An installed base can represent the reference basis for services.
An installed base describes the hierarchical structure of these objects and their individual parts (components
In business processes, an installed base can be referred to as a general unit or as an individual element (component).
The set of installed objects at the customeru2019s can be used, for example:
·        To determine the exact object for which a problem has been reported
·        To determine in detail what the transaction (for example, visit by field service representative, repair by a service employee) refers to
·        By the service employee as information about which object is affected and the parts it consists of
·        For documenting changes made to objects
Hope it helps and doubt is cleared
Regards
Prakhar

BI & Solution Manager

Dear Expert,
We are in review of using the BI with solution manager.
I get to know that we have 2 options:
1. to use BI content that come with SAP solution manager (in different client)
2. to connect Solution Manager system to another NetWeaver BI system
Which option is the best, any impact on BI system, performance, system resource?
please advise.
thank you

Hi SH,
thank you for the reply.
Is there any guide that I can refer to setup the BI client in solution manager step by step?
e.g. what to activate in BI client of solution manager, how is the connection suppose to configure, Solution manager as source system for BI client, etc etc.
The SAP Library unfortunately do not contains the technical information that I need.
thank you very much

Solution Manager vs Netweaver vs BASIS

Hi Everybody.
I have 5 year of experience with Java and J2EE Technologies and now my current company want me to join BASIS team. Is this the right move for me to go?
My first question is where to start to learn BASIS. reading material and so.
Then what is the relation between Solution Manager vs Netweaver vs BASIS.
and what are under my responsibility.
In my company SAP ECC6 is implementing and schedule to be complete in July 2008.

https://www.sdn.sap.com isthe best source to learn where you can relay.
Also u can learn on the link of ur companies sapmarket place weblink.
Thanks
Navanath Dhavale

Default password of SAP * in Solution Manager

I have created a new client in solution manager.
I could not login to the client wiht user sap* and PASS as password.
Pls help

Hi Balaji,
Just an additional info in case you dont have that parameter. Please create it.
http://help.sap.com/saphelp_NW04s/helpdata/en/c4/3a6247505211d189550000e829fbbd/frameset.htm

Question about Alert Framework in Solution Manager

Hi all,
We are planning to use Solution Manager as Central Monitoring Server, so I want to know what the advantage to use Solution Manager is, especially in Alerting.
We can define auto-reaction methods for monitors to send CCMS alerts to Alert Framework where the alerts can be forwarded to the personal responsible via Email or CCMS.
Is there any difference when using Solution Manager? Which additional functions dose Solution Manager provide in alerting?
In normal SAP Alert Framework, you can only define one receipt for escalation. Can Solution Manager support multiple level escalation? For example, an alert is sent to A, if the Alert is not confirmed by A, then the alert is forwarded to B automatically. The same way the alert can be forwarded to further persons.
Any idea?
Thanks!
Regards,
Hui

Hi Hui,
On my opinion there is no any advantage in useíng SAP Solution Manager as central alerting systems in respect to RZ20. The arguments are as follows:
- in SAP Solution Mnager you have performance restrictions on number of alerts to be displayed in one screen caused by the fact that the alerts are displayed in HTTP format
- All the customizing in SAP Solution Manager for System Monitoring is Solution specific and not transportable. It means that if you have got corrupted your system monitoring session (that happens not seldom) your settings are lost. If you have created another Solution for the same systems you have to perform customizing from the scratch
- Customizing is also not very esay to do. I would do recommend to use "User defined Alerts" Please have a look at the SAP Note 1023959 fro this topc
- SAP Solution Manager does not provide alerting mechanism -> you have to relay to ALM in any case. Here by the way to your second question I would say that it is possible implement exactly process you have described. In the ALM category you can use button escallation to define another person that would be informed via e-mail in case the first Recipient have not completed alert from this category within predefined time
+ The only feature that is unique with System Monitoring with SAP Solution Mnager is the possibility to change threshold values for all the MTEs / MTE Classes that are defined in User Define Alerts an one button click
At the conclussion I would say that there are some custommers that are using SM as monitoring platform But more pragmatical would be to configure RZ20 with help of Rule-based alerts and self- defined system groups and use ALM as alerting infrastructure. In this case you can save in plain XML file your Alert configuration and export it in any other system. ALM has on my opinion enogh functionality for alerting
Best Regards
Andrey

What is the diff of Solution monitoring and E2E Root cause analysis

Hi,
I want to know what is the different for Solution Manager Solution Monitoring and End to End root cause analysis. Currently we have implemented change management and Implementing and Upgrading SAP Solutions, if i would like to explore the solution monitoring, and end to end root cause analysis, what is the steps of configuration i need?
if i would like to have a check on the system whether is performing well, or setup the functionality of sending alert when system is having problem, which feature would be better? end of end functionality or Solution Monitoring?
Please advice..
thanks
-Fung

Hi,
If you have PI system in your landscape, I would strongly recommend to upgrade to SP15.
Trace monitoring for PI is to be available from SP17 (Not yet released)
Check [this Link.|http://service.sap.com/e2e].
Hope this solves your problem.
Feel free to revert back.
--Ragu

Solution Manager Upgrade ST-PI and ST-A/PI

System Details:
SAP ERP 6.0 (BASIS 700) / SQL SERVER 2005
Windows
Hi
We are planning to upgrade our ST-PI from 2005_1_700(0006) to 2008_1_700(0000) in our ERP System and BW System.
Similarly we are also planning to upgrade ST-A/PI from 01K_ECC600 to 01L_ECC600.
In the process, I am planning to upgrade SPAM/SAINT as well as R3Trans and tp.
We are planning to implement this in
01) ERP --> DEV, QAS, and PRD.
02) BW --> DEV, QAS and PRD.
Should we also upgrade our Solution manager system. If so, how to find the prerequisities.
Thanking you in anticipation
Best Regards
Raghunahth L

Hi Uday,
Thanks a lot for replying again.
Infact, I had already gone throught the note 781448.
But what really fishy is, using Solution Manager you have to do a lot of work like
downloading latest patches, configuring EWA Alert etc and for everything you need to get connected with SAP Network.
Since ST-A/PI is the core software which plays the communication part with SAP Network,
and Solution Manager is the System playing the key role (as per SAP), but funny thing is
that they have released the latest Patch for all systems except Solution Manager System.
Even though it is being the fact, it is very hard to believe. Anyway thanks a lot for your time and your inputs were reassuring.
Best regards,
Raghunahth L

What is source client of Solution Manager?

Similar Messages

Maybe you are looking for