What is standard table type for the BAPIRET2

Hi all,
what is standard table type for the BAPIRET2
Thanks,
Mythily

>
Vikranth.Reddy wrote:
> Hey Suhas, you edited your example after my post
As the cliche goes, "Great minds think alike "
Out of the 94 hits for table types i could have chosen BAPIRET2TAB, BAPIRET2_TT, BAPIRET2_TAB etc. but as luck would have it i chose BAPIRET2_T.
Cheers,
Suhas

Similar Messages

What will be data type for the newly created Service Interface def.?

hi @,
I am using new Service interface for the start event with objective that any outside application will be able to trigger the BPM. I have created the same SI and its operation and Input params. Now when the request comes there is an exclusive choice gateway which based upon the input fields decide which path to take into consideration. Now I need to map the SI input to the Data object but which data type I need to use ideally it should be the data type defined in the Service Interface should be used but I am not able to locate the same in the data type folder .
How can I map the input service interface data type to the Data object so that it is available in the next BPM steps?
Thanks,

Hi,
Typically the used types in a new service interface are anonymous. Try making the used complex type a global one (Right-Click onto it -> Refactor -> Make Anonymous Type Global).
Afterwards you could use the speed button around your your 'start event' and create a new 'data object' from there. Now the IDE automatically assigns the type of the service interface to your 'data object' and performs the standard mapping between the 'start event' and the 'data object' in addition.
Please also have a look at the documentation for further information:
Accelerated Modeling with Speed Buttons
http://help.sap.com/saphelp_nwce711/helpdata/en/16/52f063cac643d2917347aab86930ef/frameset.htm
There is also an interesting blog entry dealing with data objects and their reuse:
How to avoid modeling errors in Netweaver BPM? Part 3: Data flow in style
/people/soeren.balko/blog/2009/02/03/how-to-avoid-modeling-errors-in-netweaver-bpm-part-3-data-flow-in-style
Hope that helps,
Martin

Creating table types for procedures at design time: Where is the "Local Table Type" tab?

Hello,
I want to write a stored procedure (development perspective, repository object) and need to create a table type for the result table.I am working on HANA Studio 1.80.1 and the documentation tells me that I should open the "Local Table Types" tab. However, I do not see where this tab is.
I get an SQLScript tab nothing else. Any hints?
Regards,
Andreas

Hi ,
Have a look on this discussion:
Table type creation via HS repository / CDS / DDl Source
Regards,
Krishna Tangudu

Output type for the tcode f.27

Hi All,
Can any body please suggest what is the standard output type for the tcode f.27(Customer Statements).
Thanks in advance,
Nagendra

Hi Brad,
Thanks for reply.
My requirement is to get the out put of f.27 in pdf format in french or english.
Please let me know is there any FM and how to start work on this issue.
Thanks in advance,
Nagendra

What Metadata Standard is used for Face Regions?

Nice to see that LR6 now has support for Face Recognition and Face Regions. However, nowhere in the online help is it stated explicitly what metadata standards are used for the image regions.
I would hope that as Adobe is a member of the Metadata Working Group, then LR6 is using the metadata standard specified by the MWG for image regions.

It's the MWG.
Within Lightroom itself, the face regions are recorded inside the catalogue and this data is associated with keywords.
When you export a photo, unchecking the option Remove Person Info, the names are also written to the IPTC Extension Person Shown and the MWG Regions too.
I suggest you export a photo as above and examine its metadata in the Advanced tab of Bridge's FIle Info dialog box, or in some other metadata tool.

How to find table name for the fields from Standard Extractor in CRM system

How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy

What r all the tables used for the following report

hai
what r all the tables used for the following report
report:
<b>
Report that displays all the late shipments in a particular period of time</b>
send important fields for this tables also
thanks in advance.

Hi,
Imp table are vttk,vttp,vtts.
Regards
Amole

How to declare variable for Table type in the ABAP Editor

Hi!
I have Table Type 'FIELDNAME_TAB' (Table of fieldnames). I want to pass the list of fieldnames to this Table Type in the ABAP Editor.
Can anyone help me in this?

You would declare the internal table like so.
data: itab type FIELDNAME_TAB.
data: wa like line of itab.
wa = 'This_value'.
append wa to itab.
Regards.
Rich Heilman
Message was edited by:
Rich Heilman

Standard IDoc Type for Inbound NonPO Vendor Invoices - FB60

What should be the perfect standard IDoc Type for Inbound NonPO Vendor Invoice posting. Tcode FB60.
I found IDoc Type FIDCCP02 but the Function Module 'IDOC_INPUT_FIDCC2' for FIDCCP02 is not released.
In the same way many other standard function modules like - IDOC_INPUT_ACLPAY, IDOC_INPUT_FIDCCH, IDOC_INPUT_ACC_INVOICE_RECEIPT and few more are not released.
My question : If at all I have to use standard IDoc Type, Message type and Function module (Released) for Inbound NonPO Vendor Invoices, then what should be the solution from SAP ?
Thanks,
Veeru.

Hi,
IDOC_INPUT_FIDCC2 for FIDCCP02 works for us in ECC6.0
If you want Automatic tax calculation functionality using FIDCCP02.. then FIDCC2 is not correct message type for you. In that case you should probably go for :
Msg: INVOIC
Basic type: INVOIC02
FM: IDOC_INPUT_INVOIC_FI
Process code: INVF
Thanks,
Kumar

Generic standard table type

Anybody please resolve my doubt
types tb_std_type type table of sflight.
-->this i understand as not a generic table type.'NON-UNIQUE" and DEFAULT KEYS are implicity defined .
data it_std type tb_std.-->Since i could declare an internal table of tb_std_type,i strongly belive tb_std_type is not a genric table type.
But when i try to declare another type of same table type tb_std_type ie
types tb2_type type tb_std_type.
This is giving me an error saying\
tb_std_type has a generic type.Use of this type is only possible for typing field symbols and formal parameters.
If thats true then how was i able to create a internal table out of it...
In case of sorted and hashed tables it behaves as exactly as it is defined.(Like if generic,can only be used for typing formal params.field symbold..and if non generic--internal tables declaration and normal typing is possible)
Please resolve this
*Would be great if could avoid a copy paste from std.help..because i have been through it..

Hello Teenu,
Query#1
types tb2_type type tb_std_type.
This is giving me an error saying\
tb_std_type has a generic type.Use of this type is only possible for typing field symbols and formal parameters.
Why is the table generic? An excerpt from SAP documentation clearly states that:
An internal table that has no table key or an incomplete table key is generic with respect to the table key. A table type of this nature can be used only for typing formal parameters or field symbols.
Query#2
If thats true then how was i able to create a internal table out of it...
SAP says:
A standard table type with a generic primary table key can only be specified after TYPE when DATA is used.
Source: [http://help.sap.com/abapdocu_70/en/ABAPTYPES_KEYDEF.htm|http://help.sap.com/abapdocu_70/en/ABAPTYPES_KEYDEF.htm]
BR,
Suhas

Table name for the transaction data

Hello Gurus,
what is the table name for the transaction data which we have created through t.code PRO5. we are generating report for the total kms per vehicle type for a employee. these data in which tables can i get? the data related to trips ?
thanks in advance
regds
ramachandra

Hi,
Pl use RPR_TRIP_HEADER_DATA programme for getting general trip data, which will have details about number of KM travelled by employee for each trip, amount to reimbursed to the employee etc.
Thanks,
Nandagopal C

What is standard authorization object for Personal development P_PLOG

Hi,
Recently i got a object in HR and i dont have any experince in HR.Could you guide me how to asssign standard authorisation object for the personal development p_plog? how to see the infotypes and what is the header field in innfotypes?

1-First of all the object is "PLOG" for personal planning. Theres no object with p_plog , most of time to maintain HR master we use object P_ORGIN.
2- You want to assign authorization for certain infotypes?
if yes, you have to go TR.PFCG and assign the authorization to that specific role.
Now you might have question , how youll will track down the roles against the authorization object .
Therere several ways , you can go to Tr.SUIM and find reports by user , roles etc.
You can also go SE16-> give table AGR_1251, give object and you can see the values in table.
After finding the suitable roles you can go to PFCG and assign the values to the roles.
As a good practice its better to create your OWN role Z:hrXXXX and assign it to users.
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Knowledge comes but wisdom lingers!!"

What is standard requirement type SAP

What is standard requirement type and standard requirement class in sap ?
Sagere

Requirement type and class depends on the type of sales and based on the requirement.
                         Req type ================                     Req Class
For deli req === 011- Delivery requirement                    011- Delivery requirement
For MTO     ==== KE - Indiv.cust.ord. w/o consumpt.      040 - Indiv.cust.w/o cons.
etc....
Check in Below path
SPRO - Sales and distribution-Basic fucntions- Availablity check- Transfer of requrirements.
Also check in forum for more details

How to update standard table based on the custom table

Hi,
I have requirement , I have custom table whatever changes done to the custom table must be updated in the standard table
i have tried the table maintenance events but unable to handle delimit , what is the base solution for this.
1) create
2) change
3) delimit
4) delete
6)copy

the table im updating is t710
the custom table is same as the standard table except for one field . whatever the user maintains the values in custom table except for the one field everything should update back to the standard table. Im able to update when we create delele but the problem is delimition. when im delimiting the record in custom table its just changing the startdate and it is not actually delimiting the record itself .I want both records the latest one and previous one and should be update back into the standard table same as the custom table

How I can get the Billing Type for the sales order and its items

How I can get the Billing Type for the sales order and its items. I mean from which SAP tables and how?

Hi,
You need to use two tables.
First use VBFA. Enter the sales order number in the field Predecessar and the value M in SubCt field. This will give all the billing document number for the sales order items.
Then use the billing document numbers in table VBRK, where in you can get the billing document type.
Regards,

What is standard table type for the BAPIRET2

Similar Messages

Maybe you are looking for