What is stored in 7410 printer memory?

I am trying to understand two things. 1.) What is stored in the memory of the 7410 all in one; and 2.) does unplugging it clear the memory?.

The Officejet 7410 memory includes the number of pages printed, scanned and copied (but not any of the actual content). There is also a fax log that contains information on what numbers have been called (or received from), the duration, the number of pages and the date.
You can clear the fax memory by resetting the printer - turn off the printer and unplug the power, then plug it back in while holding the # and 6 buttons in. This will eventually indicate "Semi-full reset" on the screen, release the # and 6 buttins and press OK. After the reset you can press setup, 2, 3 to print a FAX report to verify there is no FAX information left.
If you are disposing of the printer make sure you also remove any memory cards inserted into the camera card slots in the front.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Storing signature in Printer memory and accessing it in the sapscript

Hi Gurus ,
I have a requirement to upload signatures on to the printer memory (Its a HP 4250 printer for printing checks) and access the same to print them while printing the checks.
Please let me know the steps to achieve the following
1) Uploading the signatures to the printer and in which format - how should this be done.
2) How to acces the signatures in the printer in the sapscript form
Thanks
Rupendra

The only way that I know of that a signature can be stored directly on a printer is through the use of an add-on simm card. Please look at OSS Note 18045, it references a company that will create a signature board for your printer. One of the problems with this is that a new card has to be created if signatures change, we no longer use this method but use either RSTXLDMC to upload TIF images, or we use SE78.
Thanks

My Apple TV memory is getting full. How do I see what is stored on the Apple TV and how do I erase content?

My Apple TV memory is getting full. How do I see what is stored on the Apple TV and how do I erase content?

Apps cannot be removed much less added to the device.
Only content from the iTunes store (movies, tv shows, music) can be added/removed on the 1st Gen ATV.
Again, the 2nd and 3rd Gen ATVS have no onboard storage for content and would generate no such message.
Just curious, has your ATV been jailbroken? If it has, no support can be provided via these forums.

HP 7410 Printer will not accept a 12 digit WEP/WPA2

I just got a new FIOS router. It has an "ESSID" (extended SSID) which has 12 hex digits for the WEP/WPA2, instead of the 10 that the old SSID had. HP 7410 printer set-up will not accept 12 digits, only 10 or 26 is the warning message. I cannot get the printer on my home wireless network now. I have several laptops which I had set up for wireless access with the old router which had a lot of problems - Win 7, Win 8 and Vista, which is why Verizon sent me the upgraded router. I reset the HP 7410 to factory settings, powered down and unplugged for 15 seconds, and held down the #6 on power up. Still no luck. Is there any way to force the printer to accept 12 hex digits for the WEP/WPA2?

What router brand/model?
Try restarting the router just before trying to connect the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

What is stored in a transaction log file?

What does the transaction log file store? Is it the blocks of transactions to be executed, is it the snapshot of records before beginning the
execution of a transaction or is it just the statements found in a transaction block? Please advice.
mayooran99

yes, it will store all the values before and after that were modified. you,first, have to understand the need for transaction log, then, it will start to become apparent, what is stored in the transaction log
before the transaction can be committed, sql server will make sure that all the information is hardened on the transaction log,so if a crash happens, it can still recover\restore the data.
when you update some data - the data is feteched into memory and updated- transaction log makes note of it(before and after values etc).see, at this point, the changes were done but not physically present in the data page, they present only in the memory.
so, if crash happens(before a check piont\lazy writer could be issued), you will that data...this where transaction log comes handy, because all this information is stored in physical file of transaction log. so, when your server comes back on, if the transaction
is committed, the transaction log will roll forward this iinformation
when a checkpoint\lazy writer happens, in simple recovery, the transaction log for that txn is cleared out, if there are no other older active txns.
in full recovery you will take log backups, to clear that txn from the transaction log.
in transaction log data generally is faster because 1. it is written sequentialyl...it will track the data pageno, lsn and other details that were modified and makes a note of it.
similar to data cache, there is also transaction log cache, that makes this process faster.. all transactions before being committed, it will wait to make sure everything related to the txn is written to the transaction log on disk.
i advice you to pick up - kalen delaney, sql internals book and read - recovery an logging chapter..for more and better understanding...
Hope it Helps!!

Printer memory question

I purchased a color laserjet mfp m177fw the other day. It is supposed to have 123 mb ram. In the set up there are only options for 16 or 32 mb. Where is the rest of the ram? The reason I ask is that during printing the printer prints 3 pages and stops fpr about 15 seconds then 2 more until done. I am using Windows 7 with 8 meg of ram. Just wondering if i am missing something.

Hi @bill-wgm ,
I see by your post that you want to know how to get more memory. I can help you.
Please take a look at these two suggestions to try.
Check in the printer drivers to see if you have the option for this model to increase the printer memory.
Go to start, devices and printers, right click your printer, left click printer properties, click on Device Settings tab, go down to Installable options, select Printer Memory and from the drop down see what choices you have.
You can also turn off the Archive Printing on the printer.
Go to setup, services, archive printing, turn it off.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printer memory error

When I try to print an XML Publisher report directly to a printer from the EBusiness Suite, I get the following error:
PDF Status page
PDF file not printed. 128 MB of memory is required to enable direct PDF printing.
Does this mean that I need to increase the memory in my printer? Are printer specifications for XML Publisher documented anywhere?

Yes,
You need to increase your printer memory and make it 128MB (minimum).
Because PDF direct printing is required minimum 128 MB.
Thanks
Ravi

I had an apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

What are the options to print pay stubs? what type prtr configs? security ?

Hi everyone on the HCM community and BASIS,
We have ECC 6 on windows 64bit server. We are in the process of going live with HCM in SAP and are looking for the most effecient and secure method to print pay stubs.
we are also configuring online pay statements, however for go live we would like to be able to also print the pay stubs.
Currently we have the following method set up to print thru windows. We installed the sapsprint software on a file print server. the synchronization happens between SAP and the file print server with file print server name definition. SAP sends the print requests to the file print server which in turn prints the report/file and sends the confirmation back to SAP.
We do however have 2 printers which are directly defined on the server and restricted to ONLY staff assigned special priviledges for print A/P cheques in their area.
The NEW requirement is to have either a .PCL or .PDF file of ALL print stubs printed in our printshop. And I am not clear on how this would happen. Would we have to define a NEW printer in SAP with a specific driver to accomodate the printshop printer (depending on the type of printer that it is?)
Please keep in mind that the printers in the print shop are varied and sometimes used to print books, manuals etc.. I beleive they also have RICOH type printers similar to what we use in th office. And all of this would be done over the network.
So For now we just wanted to explore what would be required to print a PDF file , what SAP printer configurations would be required and secured and the same for the PCL files.
Any information would definitely be appreciated!!!

Hello
SAP supports PDF conversion in 2 way's:
1. Convert using program RSTXPDFT4 , RSTXPDFT2 , RSTXPDF
2. Convert using printer device type ZPDFxx
Refer to SAP note:
317851 - Creating PDF format using the SAP spooler
Additional details:
Print to a file printer which you set-up on Windows platform.
When you set 'Host Printer: __Default' in the output device definition
in SPAD, the print is automatically sent to the defualt Windows printer
as set up in the Frontend User's Windows PC. This is usually a regular
printer.
To get this to work, you need to set up a 'Print to File' printer in the
Windows print manager of your Frontend PC as follows:
    a. 'Settings' -> 'Printer' -> 'Add Printer'
    b. On the window that appears, click on 'Next' button.
    c. Select 'Local Printer' and click on 'Next'
    d. Select the port 'FILE Print to File'
    e. Select 'Generic/Text Only' driver
    f. Enter 'Printer Name' eg: PDFTEST
    g. Share as: eg: PDFTEST
    h .Finish
Then in the output device definition in transaction SPAD, you need to
set the Host Printer field to the same name as you defined your 'Print
to File' printer in the Windows.
e.g. in the example above, the setting would be:
Host Printer: PDFTEST
Regards.

In OSX Activity Monitor, what's the difference between 'free' memory and 'inactive' memory

In OS X Activity Monitor, what's the difference between 'free' memory and 'inactive' memory. My daughters 2Gb MacBook Pro is very slow, it probably needs more memory but there is almost 1Gb of 'inactive' memory but no 'free' memory when an application is opened.
Thanks

Free RAM is the one that has not been used by any application since you started up your Mac, and inactive RAM is the one that was used by an application and it is not in use anymore.
1 GB of inactive RAM is a lot, and it may be the cause of the slowness. There are a lot of apps that allows you to turn inactive into free RAM. I use FreeMemory, but have a look at the Mac App Store.
If you are a developer, you can do that with a command you can type into Terminal:
sudo purge

What is the HP wireless printer password it keeps asking me to put in to join??

What is the HP wireless printer password it keeps asking me to put in to join?? I have no idea where to find this?
This question was solved.
View Solution.

Hi,
One password associated with a wireless printer would be the wifi password to which the printer will need to connected in order to print wirelessly. Is it asking for a wifi password?
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

What are the disc space and memory requirements for the apps?

What are the disc-space and memory requirements to run the apps

Hello John!
thank you for the info. However, as I have only 1Gb memory and a 32Gb
solid-state disc, I think that I will stay with Acrobate.com for a while
longer.
Regards
Brianb

Trying to print a jpeg (not a photograph). No matter what setting i select, it prints in landscape. How do I get portrait printing?

Trying to print a jpeg (not a photograph) in Elements 12. No matter what setting i select, it prints in landscape. How do I get it to print in portrait?
Second question. What is the fastest way to change the number setting (0 to 12) for an existing photo so that the file size is smaller?

kkbadobe wrote:
Trying to print a jpeg (not a photograph) in Elements 12. No matter what setting i select, it prints in landscape. How do I get it to print in portrait?
Second question. What is the fastest way to change the number setting (0 to 12) for an existing photo so that the file size is smaller?
Go to File>print in Editor. In the dialog that comes up, you should see "Page Setup". Select "Portrait".
This assumes that the file is in portrait orientation as well, before sending it to the printer.
As for question #2, I am unaware of a numeric sequence such as you would like in this program. You can alter file size via File>save for web, however.

Check if in Word document (Word 2013) advanced option "Use fonts that are stored on the printer" is set

Is it possible in a VBA macro to check whether an opened word document has the advanced option "Use fonts that are stored on the Printer" is set.
I have a word macro that opens and processes thousands of word documents. The processing needs to be different based on whether this option is set or not.
Thanks,
Harry Spier
Harry Spier

Hi Harry,
I'm afraid that we're not able to retrieve this option value. The Advanced Options are actually stored as application level. Some of the options can be accessed with the Word.Application.Options property. But there're also many options that are not
exposed in the Word Object Model. As you can see in this figure, there's no property corresponding to "Use fonts that are stored on the printer":
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What r the steps to print barcode in smartforms

hi experts,
can anybody tell me what r the steps to print barcode in smartforms.
with examples is appreciated.
points will be rewarded if helpful.

/people/javier.perez-ullivarri/blog/2007/12/03/create-barcode-in-abap-conversion-to-pdf
Creating Bar code:
-->From trans code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
--> when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
-->Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
-->The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
SAP Barcodes
-->Barcode solution consists of the following:
barcode printer
barcode reader
mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
for your reference check the below links:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
for smart, please check the below link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
See the below program forbarcode in sapscript for your reference:
DATA: BAR_CODE1(16) VALUE `ABC01230123A01'
NEW-PAGE PRINT ON IMMEDIATELY `X'.
FORMAT COLOR OFF INTENSIFIED OFF.
If the barcode is the first element on the page, the following Write
statement is needed (otherwise you get a date in the first print
control.
WRITE:/
Turn on the barcode font, print the data, and switch back to the
printer's default font. Be sure to use NO-GAP to avoid unwanted
characters or CR/LF.
PRINT-CONTROL FUNCTION `BCPFX'
WRITE: BAR_CODE1 NO-GAP
PRINT-CONTROL FUNCTION `BCSFX'
Add a Write statement to prevent insertion of CR/LF into the barcode.
WRITE:/
Sample SAPSCRIPT
Variable BAR_CODE1 contains the barcode data, including asterisks.
The & is needed to avoid unwanted spaces or CR/LF characters
/E LINE
/: PRINT-CONTROL BCPFX
= &BAR_CODE1&
/: PRINT-CONTROL BCSFX

What is stored in 7410 printer memory?

Similar Messages

Maybe you are looking for