What is suitable for Generate Reports or Inovice?

Which Tool or Class is suitable for Generate Reports or Inovice?
i hope to make some reports and invoice for my project,
but i don't know what is suitable class to generate and show report and invoice.
can you give me some advice?
thanks!

Just a small correction, the link should be:
http://www.object-refinery.com
Regards,
Dave Gilbert
www.object-refinery.com

Similar Messages

  • What is suitable method or Tool for Generate Reports or Inovice?

    Which Tool or Class is suitable for Generate Reports or Inovice?
    i hope to make some reports and invoice for my project,
    but i don't know what is suitable class to generate and show report and invoice.
    can you give me some advice?
    thanks!

    My report consists of one main repeating frame containing about 15 (detail) repeating frames. The main frame starts a new page each time the deposit (master record) changes and resets the physical page number at the top of the page. In the property palate, I have Source set to my deposit number and Maximum Records per Page set to 1 and this results in the start next deposit on a new page.
    I can't find any 'BREAK' command that would result in the action I need - and there seems to be nothing in the SRW_package or conditional formatting that might help.
    What I was hoping was that there would be a command somewhere that I have missed, that would cause a new report to be written each time the deposit (or master record) changes, rather than one huge report.
    Thanks for the suggestion
    Glenn

  • Which Tool or Class is suitable for Generate Reports?

    i hope to make some reports and chart diagram for my project,
    but i don't know what is suitable class to generate and show report.
    can you tell me some hints??
    thanks!

    Just a small correction, the link should be:
    http://www.object-refinery.com
    Regards,
    Dave Gilbert
    www.object-refinery.com

  • Functional specs for generating Report.

    < MODERATOR:  All points have been UNASSIGNED and the message locked.  Please do not share email addresses, documents, or links to copyrighted or company confidential information on these forums. >
    Hi
    This is Sunil garg Sd consultant.
    Can any body provide me the format with exaples for writing a functional specs to generate the Reports.
    How we will write yhe processing logic of that repot.
    Tables & thier relations.
    Please Help me
    Thanks & Regards
    Sunil garg

    Patial example of Functional Specs. Please map it in Excel & it will give you better clearity. This is Sample for SD report covering Link Between Project System, Sales Order, Delivery, Billing & Accounting Document
    <b>Initial Screen</b>:
    Fields | Table-Field | Remark | Table Joint
    Sales Organization | VBAK-WAERK | Single Selection
    Distribution Channel | VBAK-VTWEG | Multiple Selection
    Division | VBAK-SPART | Multiple Selection
    Sales office | VBAK-VKBUR | Multiple Selection
    Sold to Party | VBPA-KUNNR | Multiple Selection | VBAK-VBELN=VBPA-VBELN
    Material | VBAP-MATNR | Multiple Selection | VBAK-VBELN=VBAP-VBELN
    WBS Element | VBAP-PS PSP PNR | Multiple Selection | VBAK-VBELN=VBAP-VBELN
    Sales Order Type | VBAK-AUART | Multiple Selection
    Billing Type | VBRK-FKART | Multiple Selection | VBAK-VBELN=VBFA-VBELV & VBRK-VBELN=VBFA-VBELN
    Period
    <b>Main Screen</b>:
    <i>Header</i>
    Sales Organization | VBAK-VKORG
    Period
    <i>Item Level</i>:
    Sold-to-Party | VBPA-KUNNR where VBPA-PARVW = AG
    Distribution Channel | VBAK-VKWEG
    Division | VBAK-SPART
    WBS Element | VBAP-PS_PSP_PNR
    Sales Office | VBAK-VKBUR
    Sales Doc type | VBAK-AUART
    Sales Doc No | VBAK-VBELN
    Material | VBAP-MATNR
    Mat Desc | VBAP-ARKTX
    Qty | VBAP-KWMENG
    UOM | VBAP-MEINS
    Doc Currency | VBAK-WAERK
    Delivery No | LIKP-VBELN
    Billing Document Type | VBRK-FKART
    Billing Document No | VBRK-VBELN
    Billing Document Line No | VBRP-POSNR
    Quantity | VBRP-FKIMG
    Price - Base Price
    Price - Service Tax
    Price - Education Cess
    Price - VAT
    Price - Other taxes
    Price - Total
    Accounting Document Number | BKPF-BELNR
    Table Joints at Item Level:
    VBAK-VBELN = VBPA-VBELN
    VBAK-VBELN = VBAP-VBELN
    VBAK-VBELN = VBFA-VBELV (For Delivery)
    VBAK-VBELN = VBFA-VBELV
    LIKP-VBELN = VBFA-VBELV
    VBRK-VBELN = VBRP-VBELN
    VBRK-XBLNR = BKPF-XBLNR
    some details are missing, please try to identify & use it as per your requirement.
    Regards,
    Rajesh Banka
    Reward suitable points.
    How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

  • Ard claims no permission for generating reports...

    I tried to do a remote install this morning for the first time this morning...
    Ard started the process but the status was 'waiting for file' forever...
    I tried copying a file to the computer and it claimed that no one was logged into the console
    (but the computer was next to me and I was logged in! )
    In frustration I trashed the prefs file and started from scratch... I readded several machines
    but when I tried to do the install a package or copy a file I was getting the same errors
    I tried to copy to another machine and it worked! ( so did the install )
    In desperation I logged out and back in on the target machine and everything seems
    back to normal ;(
    The main remaining problem is that I can no longer generate reports, the target machine
    reports that I am not authorrized in the task report line.
    What do I need to do to generate reports? ie get authorized

    Is the ARD client up to date on the remote computer? In the Sharing Pane of the System Preferences, have you enabled Remote Management? If Yes, have you enabled to correct users in the "Allow Access" Section? If yes, have you Enabled the correct features in the Options section?

  • T codes for generating report in MM

    Can anyone tell me the tcodes for generating following reports in MM.
    1)Req# along with the dollar amount in the req per line item.
    2) the repot which shows the dollar value in the Info record & the dollar value in the req.

    hi latha,
    Enter Tcode SAP1 and check in MM you will get all tcodes related to reports in MM .. check if any of those match ur requirement
    regards
    pushpa

  • XL Reporter - Toolbar is missing needed for "Generate Report"

    Hello - I am going thru the eLearning for XL Reporter.
    I have opened a template in XL reporter and I want to "Generate Report", however the toolbar shown in eLearning is not visible.
    Any advice? Thanks ahead of time!

    John,
    The toolbar often stays hidden when opening XL Reporter.  An easy way to get it to appear is to resize a column in the spreadsheet.  For whatever reason, this always makes it pop up for me.
    You could also turn it on in Excel:
    View > Toolbars
    There should be one for XL Reporter at the bottom
    Uncheck it and then recheck it
    That will force it to appear as well
    I believe your Excel Macro Security has something to do with this issue, but have never nailed it down.
    Hope this helps,
    Brad Windecker

  • Urgent ; SAP Query for generating report  from BLNR ,DOCNR and oth in NEWGL

    We are posting document to 5 ledgers.There is a leading ledger and 4 non leadING ledgers. One Ledger contains the detailed information , and I need to add all the fields information when I create that report.
    We want BLNR field to be the reference for creating report.
    we have to create a report clubbing BLNR field from BKPF  , and DOCNR from FLEXA Table.
    Thanks,
    YGB

    Sorry it is BELNR not BLNR

  • Dynamic where clause for generated reports (designer 6.0)

    Hi,
    I'd like to include dynamic where clause into my reports. It's easy with report builder by using bind parameter in a query where clause (&param where param is a parameter in which you fill a VARACHAR2 to complete default where clause).
    Problem with designer 6.0 report generator is that he failed while trying to parse the query statement he contructs if there is a bind parameter within.
    How can I manage this problem ?
    Thanks for answers
    Romain

    Hi Divya,
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no P_WHERE_CLAUSE= '||Where_Clause);Instead of using SET_REPORT_OBJECT_PROPERTY built in try using ADD_PARAMETER built in which
    adds parameters to a parameter list. Each parameter consists of a key, its type, and an associated value.
    v_rep := RUN_REPORT_OBJECT(repid); and instead of using RUN_REPORT_OBJECT try using RUN_PRODUCT.
    DECLARE
         repid REPORT_OBJECT;
         v_rep  VARCHAR2(100);
         Where_Clause Varchar2(4000) := null ;
            *Pl_Id        ParamList;*
            *Pl_Name      VARCHAR2(10) := 'param_list';*
    BEGIN
         Where_Clause := 'Where '||Create_Where_Clause();
         message(Where_Clause);
         message(' ');
            pl_id := Get_Parameter_List(pl_name);
            IF not Id_Null(pl_id) THEN
               Destroy_Parameter_List(pl_id);
            END IF;
            pl_id := Create_Parameter_List(pl_name);
            Add_Parameter(pl_id,'P_WHERE_CLAUSE', TEXT_PARAMETER, WHERE_CLAUSE);
            Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
    --      Add_Parameter(pl_id,'ANY_OTHER_PARAMETER', TEXT_PARAMETER, 'VALUE FOR OTHER PARAMETER');
            RUN_PRODUCT(REPORTS,'REPORT_NAME', ASYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL);
    END;Also you can add as many User created or System parameters as you want using add_parameter. Updated the code to add PARAMFORM parameter.
    Best Regards
    Arif Khadas
    Edited by: Arif Khadas on Mar 15, 2011 9:31 AM

  • Need Code for this requirement for generating report

    1) Creating interactive reports for sales orders, vendors, customers, and stock available  In each type for a particular material, list of purchase documents and vendor performance report that lists vendor name, materials Supplied and actual delivery times, payments terms and prices.
    2) Classical Report to display a list of Purchase
      Requisitions with details like MRP controller, release date, unit to
      Measure along with the standard details, Table used EBAN.
    3) Create a list of customer number, Credit limit
      To the given Customer. Tables used KNA1, KNKKF1 (Customer Credit table)
    Plz help me i need it very urgently....

    I always put code in the when-validate-RECORD trigger to ensure fields are entered, rather than setting the property. That way, the user can enter other fields within the record, and then gets a message that the field is required only when leaving the record.
    ...of course, if the date item is the only field in the block, then the when-validate triggers will not run unless the user at least types a space in the date. In that case, you need to check in the key-commit trigger.

  • Help for -Generate Report using Word template having company Logo

    HI GUys,
    I am trying to generate a report in PDF using the word template having some company logo as footer to that .
    When user click on print ,the graph should be added to the template and its should output the report in pdf.
    I am able to achive this when I 'm  not using the template,but when I use the template (sample code shown below),its throws the error attached in screenshot.
    pls suggest the possible way to achieve this

    Why are you deleting the file after creating the report? Are you sure that the image exists at the path specified when running?
    Also, in your top screenshot because of data flow there's a high possibility that you actually delete the file before it gets used because there is no connection between the end of writing the report and deleting the picture.
    I also suspect there's a chance there might be a permissions issue - you are trying to get the file from another user's desktop which isn't normally allowed - do the file/folder permissions give you access to that file path? I would try putting the picture on your own desktop just to rule that out.
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets

  • Generating report problem

    Hi all,
    I have procedure for generating report as csv file.I n this procedure has several BEGIN..END pl/sql blocks and
    SELECT...INTO..clauses .And i'm using UTL_FILE for generating csv report.
    But problem is now this procedure is taking 12 hrs for 1 month date interval(3lacks records).I need to run this procedure every month .I need to reduce the execution time.could Some one give me a new idea for generating report.
    Any new Idea?

    What makes you think that "FOR ... IN (SELECT .....) LOOP" isn't looping through a cursor?
    for below block code is entire block
    BEGIN
                IF LN_COUNT > 0 THEN
                    LS_RESTART_POSITION :=NULL;
                    FOR LN_CNT IN (SELECT RESTART_POSITION FROM TEST_PROGRESS WHERE to_char(created_on,'dd/mm/yy hh24:mi:ss') >=(SELECT nvl(max(to_char(created_on,'dd/mm/yy hh24:mi:ss')),'00:00:00') FROM TEST_PROGRESS
                                    WHERE TEST_SESSION_DETAIL_ID=TB_TYPE_DET_ID(TEST_TYP_ID_CNT).TEST_SESSION_DETAIL_ID AND
    RESTART_TYPE = 1)
                                AND TEST_SESSION_DETAIL_ID=TB_TYPE_DET_ID(TEST_TYP_ID_CNT).TEST_SESSION_DETAIL_ID AND RESTART_TYPE<>1
                                ORDER BY CREATED_ON)
                        LOOP           
                            LS_RESTART_POSITION := LS_RESTART_POSITION||'\'||LN_CNT.RESTART_POSITION;       
                        END LOOP;
                        LS_RESTART_POSITION:= SUBSTR(LS_RESTART_POSITION,2,LENGTH(LS_RESTART_POSITION)-1);
                ELSE     
                    LS_RESTART_POSITION :=NULL;
                    FOR LN_CNT IN (SELECT  RESTART_POSITION FROM TEST_PROGRESS WHERE TEST_SESSION_DETAIL_ID=TB_TYPE_DET_ID(TEST_TYP_ID_CNT).TEST_SESSION_DETAIL_ID ORDER BY CREATED_ON)
                        LOOP           
                            LS_RESTART_POSITION := LS_RESTART_POSITION||'\'||LN_CNT.RESTART_POSITION;       
                        END LOOP;
                        LS_RESTART_POSITION:=SUBSTR(LS_RESTART_POSITION,2,LENGTH(LS_RESTART_POSITION)-1);
                END IF ;
                EXCEPTION
                WHEN OTHERS THEN
                Sp_Insert_Error_Log (LS_OBJECT_NAME,SYSDATE,'RESUME_FLAG','WHEN OTHERS TRIGGERED'||'-'||SQLERRM);
                END;
    How are you populating your collection? Via a bulk collect?
    through  bulk collect
    However, I would be willing to bet that this loop is inside another loop, right?
    Yes your are correct it is inside of the loop.
    I procedure is too big(800lines) hence i can't post entire procedure.If any possible plz let me know.
    Yes                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Need a bapi or table for GL Report

    Hi experts,
    I need a bapi or table for generating report period balance for GL accounts. i found one bapi BAPI_GL_GETGLACCPERIODBALANCES which is closer to my requirement. But i want to get the balances for cost center and particular material. As Cost center and product ranges are in my selection fields.
    Can anyone tell me table or BAPI?

    SAP standard infoset query provides a report STDCOST for this.
    May be this will suit your requirement. It will give material wise costing.
    hope this helps.
    reward if helpful.

  • Generating reports using RWServlet.class(Patch-12)

    Sir,
    We have configured the Apache Tomcat-3.2.2 to be the servlet engine for generating reports using oracle.reports.rwcgi.RWServlet. Earlier we have been using, Patch-2. We have created many keys(cgicmd.dat) for the different reports that are there with the mostly needed report parameters(including PARAMFORM=YES). We call the report in the browser giving the URL "http://<machine_name>/oraclereports/servlet/oracle.reports.rwcgi.RWServlet?<key_name>". Now, the report page that gets generated is the parameter form. In the HTML source of this page, the form-submitting action is pointing correctly to URL "http://<machine_name>/oraclereports/servlet/oracle.reports.rwcgi.RWServlet.....". The parameter values are entered and the form submitted. The generated report is perfect..
    Some days before, Patch-10 was installed. The RWServlet.class that comes along with this was copied to the oracle/reports/rwcgi folder in Tomcat. Now, when the same steps(calling report) as done before were done, the report is not getting generated, giving the output for no page found. The HTML source of the parameter form shows the form-submitting-action URL as "http://<machine_name>/servlet/oracle.reports.rwcgi.RWServlet.." omitting the "oraclereports" that was there earlier.
    Now, we have installed Patch-12, copied the new RWServlet.class. For this case also, the same problem is now encountered. Now, have we have to do any additional configuration somewhere? The page that is generated, on giving the URL ""http://<machine_name>/oraclereports/servlet/oracle.reports.rwcgi.RWServlet/showenv?server=Rep60_MACHINENAME" is showing the SCRIPT_NAME as "/servlet/oracle.reports.rwcgi.RWServlet". Is it something to do with this? We tried putting SCRIPT_NAME as a user environment variable, and also by giving SET SCRIPT_NAME=/oraclereports. Still, the problem persists. Doesn't the HttpServletRequest class have some method that returns the SCRIPT_NAME, i.e, the path where the execution is being done? How could different versions of the same class oracle.reports.rwcgi.RWServlet deployed with the same settings on the Tomcat servlet engine behave differently? Please help us on how to solve this problem..
    Thank you,
    Regards..
    Ranjith

    Hi,
    Is there some way, i.e., by doing some Tomcat setting changes, that the RWServlet of Patch-10/12 can be made to work like RWServlet of Patch-2(with normal settings)? Please help..
    Thank you,
    Regards..
    Ranjith

  • What is responsible for phantom usage? (a 36-hour test)

    There is a ghost in my iPhone 4S/5.0.1 that is mysteriously ramping up the usage and consuming cellular data when the phone is dormant (sitting on table, no apps running, no user interaction of any kind). I've just completed an 36 hour test monitoring the charge state ot the battery. Throughout the test, the iPhone was a few feet from an active WiFi acaccess point (Airport Express), and several blocks from a GSM cell tower.  Every few hours, I clicked the Home button, noted the usage and cellular data consumption, and put it back to sleep.
    Friday 11pm. The iPhone had been in its dock all evening, and the battery was fully charged. Usage, as reported by Settings/General/Usage was 0 minutes. Cellular data = 5.0 MB sent, 33.1 MB received.
    Sat 11 am. Battery at 93%. Usage = 11 minutes. Data 5.0/33.2
    Sat 2pm. Battery at 89%
    Sat 5pm. Battery at 87%. Usage = 24 minutes.
    Sat 11pm. Battery at 82%. Usage = 31 minutes. Data 5.1/33.5.
    Sun 8am. Battery at 77%. Usage = 39 minutes.
    Sun 11am. Battery at 75%. Usage = 42 minutes. Data 5.1/33.5
    As you can see, the battery discharged 25% over the 36 hour test. From this, one can extrapolate that the standby time would be 144 hours (6 days), significantly less than Apple's claimed standby of (up to) 200 hours. However, I had WiFi and Bluetooth on. Apple's 200 hour claim is no doubt a best-case measure obtained with everything other than the cellular radio active. 
    More troubling is the usage that was reported: 42 minutes over the 36 hour test.  The iPhone was completely dormant (sleeping) throughout the test, except for the 6 times that I poked it to read the battery meter and the usage stats. The screen was on for perhaps 15 seconds each time. From an end-user perspective, I used it for about 1.5 minutes, not 42 minutes.  Perhaps the iOS usage measurement rounds up to the nearest minute each time (just like cellphone carriers measure phone calls), in which case, I was (arguably) responsible for 6 minutes worth of 'usage'. 
    My question: who or what is responsible for the rest of the 42 minutes of usage reported by iOS? I'd like to know what processes account for the reported 42 minutes. Who or what triggered them, and why are they counted as part of my "usage"?
    I know what was not responsible. I don't have iCloud activated. There is no Mail being pushed, or Mail being fetched. I don't have an Exchange account. WiFi Sync is off. Location Services is turned on, but none of my apps that employ Location Services were active (Maps, Google, Camera+, etc). Knowing that they're power hogs, I have disabled most of the System Services that use Location Services (Diagnostics & Usage, iAds, Setting Time Zone and Traffic are all off). Cell Network Search is on, but the iPhone wasn't moving, had a nice strong GSM signal, and had no need to be searching for different cell towers.
    If my six  'meter reading' events do account for 6 minutes of usage, that leaves 42-6=36 minutes unaccounted for. Perhaps it's a coincidence, but the test ran over 36 hours. I wonder if some system-level process is triggered once an hour or so, and gets counted by the iOS usage meter.
    The other anomaly that my test revealed is the celluar data that was sent/received. It's very small, and certainly won't kill my data plan. But I have to wonder why any cellular data was flowing. The iPhone had a solid WiFi connection throughout. If iOS had need to send or receive some data in the background, why did it use the (expensive) cellular data channel instead of the (free) WiFi channel?

    Page 22 of this document will give you some numbers that will allow you to estimate the total data used for a meeting. Keep in mind these numbers are what Adobe saw as average consumption, yours may be higher or lower.
    http://www.adobe.com/content/dam/Adobe/en/products/adobeconnect/pdfs/web-conferencing/Adob e-Connect-9-Technical-Guide.pdf

Maybe you are looking for