What is support Pack?

Hi all,
I need to know abt support pack,what does it signify?
and when i have a not who has support pack higher than in our system then how can we apply the note???
Kindly clarify all.
Thanks in advance.

Hi Aasu,
Here is the below link. Please go through this link it will explain you the detail information regardng the support pack.
http://www.sap-img.com/basis/oss-notes.htm
sap.ittoolbox.com/groups/technical-functional/sap-basis/applying-support-pack-stacks-1477494
http://whitepapers.itbusinessnet.com/whitepaper415/
&********************Reward Point if helpful*****************&

Similar Messages

What is support pack for NW04 for print functionality

what is support pack for NW04 for print functionality????

Hi Kavita,
printing is no fun with web dynpro, as the web-centric solution to useJavaScript is not supported in WebDynpro.
I've spend lots of time with this issue and my experience is that if you want to get a proper printout you will have to rebuild the page (e.g. with XML) and render a printable version (e.g. with XSLT). Every other solution might work but will look crappy.
regards,
Christian

Latest Support Packs for integration of SAP XI 7.0 and SAP ECC 6.0 Retail

Hi,
We are integrating SAP ECC 6.0 for IS-Retail System with SAP XI 7.0. I would like to know what lastest Support Packs should present in both the Systems for proper integration, without any technical errors in future.
Regards,
Balaji

Hi,
The latest Support Pack for PI 7.0 is now SP 14
You can confirm this from SAP service market.
https://service.sap.com/swdc
Thanks
Swarup

Support Pack Stack

hi,
can any body please tell
what is support pack stack?
is it contains patchs for ABAP and JAVA stacks or only for JAVA?
can we patch for java individual component?
i know how to apply through JSPM.
thanks inadvance,
regards,
raju.

Raju,
The SP Stacks are sets of Support Packages and patches for the respective product version that must be used in the given combination.
They are for ABAP and Java.
In general, when applying support packages, you always have to apply the complete Support Package Stack.
Patches to a specific Support Package can be installed individually.
For example, if you are on SP Stack 12 and need Support Package 14 for a certain component, you have to apply the complete Support Package Stack 14.
If you just need a patch for Support Package 12 of a certain component, you can just apply the patch, as long as it is Support Package 12.
More details here https://service.sap.com/sp-stacks
Thanks,
Dieter

Support Pack/Patch

Hi,
We are on BI 7.0.Our backend support pack level is 18.What latest support pack should our front end be on?As of now it is on support pack 7 patch 1.
Regards
Kalpit

There is no restriction on your SAP GUI SP level - you will have to make sure your front end is on the latest SP available irrespective of your backend SAP BI Patch levels...

What are the key components to be mointored after support pack installation

I m an PI developer ,last Friday Basis installed the service pack 15 in Quality box . They are asking me to mointor the QPI to make sure everything is running fine and let them know so they can install the service pack in Production box.
Apart from normal monitoring of the system ( RWB and SXMB* ), what are the other components i need to monitor.
Can you tell me what to be monitored after Support pack installation.

Hi,
1) If CCMS is configured then you can monitor this as well (RZ20)
2) Keep an eye on Queues
Regards,
I m an PI developer ,last Friday Basis installed the service pack 15 in Quality box . They are asking me to mointor the QPI to make sure everything is running fine and let them know so they can install the service pack in Production box.
Apart from normal monitoring of the system ( RWB and SXMB* ), what are the other components i need to monitor.
Can you tell me what to be monitored after Support pack installation.

What is the best way to apply Support Pack Stacks among satellite systems

Hi,
We have differenst systems liek R3, SCM,CRM,XI, BW and EP. We would like to apply teh support pack stack 12.
Which land sacpe need to be applied with the stack first?
R3 or other satellite systems? Is there any recommendation available from SAP on this?
Thanks in advance
Jnaneswar.P

Thanks for your reply Nick101. I see my example was oversimplified. When I say "multiple groups of contacts over multiple users" I'm really referring to N groups of contacts over N users.
So I need to add Fred, who can access and sync Bob's contacts, Sally's contacts, and Common contacts, as well as Fred's contacts. Can I do it with OS X server?
You mention you keep your and your partner's contacts administered locally. What keeps you from administering them through OS X server as well?
I am guessing this can all somehow be accomplished with multiple contact accounts, but I can't find any information on the web explicitly describing this.

EHP5: What are prerequisites relative to ERP/EHP, & NW support packs

We understand that ERP EHP5 is going into Ramp Up in December, 2010. To add EHP5 to our environment, what are the minimum support pack levels for ERP (we are currently under EHP4 support pack 4, moving to 7), as well as any other support pack level dependencies for NetWeaver? (In other words, what are the "jumping off points" from previous support pack levels?)
Any estimate of General Availability for EHP5?

Hello,
Based ón the current support pack level EHP5 stack will be generated with pre requisites .
You have to maintain the data in solution manager.
EHP Installer will take care rest of the things like notes tobe implemented , SAINT/SPAM versions.
regards
Vagesan

Support Pack upgrade error in Import Phase

Hello,
Currently I am upgrading SCM system with Support pack level 12 to 20 . When i am applying Basis 12 to 20. I got an error in Import_Proper phase.
Could you please help me on this? I tried and still searching solution for this..But no luck...
Os is : AIX and
Log File:                /usr/sap/trans/log/SAPIB70013.xxx
Main import
Transport request   : SAPKB70013
System              : xxxx
tp path             : tp
Version and release: 372.04.71 700
child process 934006 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_report_interface
fcode:      CLOSE_LINE_MODE
tabname:    SOURCE
len (char): 40
key:        CL_OBJECT_COLLECTION==========CT
retcode:    1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1212554 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_report_interface
fcode:      CLOSE_LINE_MODE
tabname:    SOURCE
len (char): 40
key:        CL_WDR_APPLICATION_WINDOW=====CT
retcode:    1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1171520 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_report_interface
fcode:      CLOSE_LINE_MODE
tabname:    SOURCE
len (char): 40
key:        CL_WDY_MD_EVENT_SOURCE========CI
retcode:    1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1331412 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_xrtab
fcode:      RT_MI_LOAD
tabname:    ECSCR_DATA
len (char): 106
key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
retcode:    1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
child process 1310922 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_xrtab
fcode:      RT_MI_END
tabname:    WDY_APP_PROPERTY
len (char): 64
key:        DEMO_UIEL_DROPDOWN_BY_IDX     DEMO_VIEW
retcode:    1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 018446 - 999999 not imported because the child processes died for unknown reason
child process 1310924 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_report_interface
fcode:      CLOSE_LINE_MODE
tabname:    SOURCE
len (char): 40
key:        CL_WDY_MD_OUTGOING_EVENT======CT
retcode:    1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1286192 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_xrtab
fcode:      RT_MI_LOAD
tabname:    ECSCR_DATA
len (char): 106
key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
retcode:    1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 009158 - 018411 not imported because the child processes died for unknown reason
import portion 018412 - 018527 not imported because the child processes died for unknown reason
import portion 018528 - 999999 not imported because the child processes died for unknown reason
sap_dext called with msgnr 1:
db call info -
function:   db_xrtab
fcode:      RT_MI_LOAD
tabname:    ECSCR_DATA
len (char): 106
key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
retcode:    1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
Main import
End date and time : 20100909034914
Ended with return code: ===> 12 <===
     |   ######################################
Thanks and Regards,
Sankar
SAP BASIS Consultant

Hi,
Thanks for you reply. I restarted import but no luck still. I activated some object also not working. when i call SPAM it is not going to the SPAM pager. Showing dump...
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          10.09.2010 09:41:37
Short text
     Function module "POSS_UIREQ_OPT_SUBMIT" not found.
What happened?
     The function module "POSS_UIREQ_OPT_SUBMIT" is called,
     but cannot be found in the library.
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTXC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
      not caught in
     procedure "OPEN_FORM" "(FUNCTION)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The program "SAPLSTXC" contains the CALL FUNCTION statement.
     The name of the function module to be called is "POSS_UIREQ_OPT_SUBMIT".
     No function module exists with the name "POSS_UIREQ_OPT_SUBMIT".
     All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attenti
    upper/lower case and underscores ("_").
    or
b) Transport error
c) In the case of an enqueue/dequeue module,
    the lock object may not have been activated
    (ABAP/4 Dictionary).
When i tried to check function module it is not there..
Could you please help on this?
Regards,
Sankar Basis Consultant

SB Audigy Series Support Pack 5.3 (02/24/2015)

This software/driver pack is unofficial, not supported by Creative Labs.
Use it at your own risk.
Supports any model of the following Sound Blaster cards (based on Emu10kx DSP):
- Audigy
- Audigy 2
- Audigy 2 ZS
- Audigy 4
- Audigy 5/RX
For Audigy SE/LS/Value and Live! 24-bit cards, click here for a compatible version.
Operating systems supported:
32-bit and 64-bit editions of Windows 10 / 8.1 / 8 / 7 SP1 / Vista SP2 / XP SP3
Included in the pack:
- Audigy series driver 3.01.0039 (Windows Vista or later) (**)
- Audigy series driver 2.09.0016 (Windows XP)
- ALchemy 1.45.03
- Audio Console 1.41.00
- DDL and DTS Connect License Activation 1.00.04 (*)
- Dolby Digital Live Pack 3.03.08 (*)
- EAX Console 3.00.60 (Windows Vista or later)
- EAX Console 3.00.59 (Windows XP only)
- Feature Mode Selection Utility 2.10.07
- Graphic Equalizer 2.10.01
- MediaSource DVD-Audio Player 2.00.78 (***)
- SoundFont Bank Manager 3.21.02
- Speaker Calibrator 1.60.14 (Windows XP only)
- Speaker Settings 2.10.05 (Windows Vista or later)
- Speaker Settings 2.10.04 (Windows XP only)
- Surround Mixer 4.00.76 (Windows XP only)
- THX Setup Console 2.20.08 (Windows XP only)
(*) Purchase and activation required, more info at http://buy.soundblaster.com.
(**) - For Audigy 5/RX (SB1550) and Audigy 4 Series II (SB0612) this driver also supports Windows XP.
(***) - Requires Audigy 2, Audigy 2 ZS ou Audigy 4
Does this driver improve sound quality or performance Are there any tweaks ?
No, this driver does not improve sound quality nor increase performance.
No, there are no tweaks.
If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and sound fidelity that all audiophiles always look for.
If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
There are some undocumented registry values, but nothing related to sound quality or performance.
Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
Fixes and improvements:
- Fixed Audigy 5/RX support.
- Readded "EndPoint Utility" to enable the use of other digital devices to output Dolby Digital Live encoded audio.
- Fixed driver installation issues on Windows 10.
- Fixed Audigy "1" or Audigy 2 mute issue.
- Audigy RX is now fully supported.
- EAX Console now works on Windows Vista or later.
- Karaoke effects now work properly on Windows Vista or later, just use EAX Console to enable them. Effects will only be applied to the Microphone input.
- Sound Blaster Audigy Control Panel now available for all cards, but it lacks many settings available on Audio Console, so use the later.
- Added instructions on how to install the Gameport.
- Fixed missing speaker settings strings on Windows XP when DDL is enabled.
- Improved driver installation, less confirmation prompts.
- Improved setup procedure and scripts.
- Removed Encode switcher for now, only DDL is available.
- Installation now customizable, select what you want to install.
- New integrated Post Driver Install Helper tweaks the driver without tampering certificate.
- CMSS2 is now available.
- OpenAL 64-bit support.
- Dolby Digital Live now works on Windows 8.1 (update 1). Creative Audio Service was not being installed on that OS.
- Special FX, Advanced EQ, Studio and Custom presets now available on Windows Vista or later.
- Audio Console does not crash anymore on non-English localized installs. Localized resources for Online Karaoke tab were missing; added mostly localized Korean and Chinese (Traditional) resources.
- Online Karaoke page is available for all Audigy cards on Windows Vista or later; this is NOT a new feature, but an easier way to configure the Microphone.
- EAX Settings for Windows Vista or later includes EAX Studio, a fancy version of EAX Control Panel, no changes in functionality, except the Test button now works.
- Added fully localized Korean and Chinese (Traditional) resources for EAX Studio, which were missing.
Undocumented fixes by Creative (not listed in the release notes):
- Headphone mode now sticks and does not revert automatically to Speakers mode on Windows Vista or later.
- Special FX, Advanced EQ and Studio presets were not working on Windows Vista or later.
Release Notes:
IMPORTANT: Driver uninstall on Windows Vista or later
The included driver for Windows Vista or later has a bug that causes a stop (blue screen) error when unloaded by disabling the Audigy or uninstalling the driver.
To workaround this issue, run the KillDrv.exe utility included and restart when asked to do so. Proceed normally and uninstall all the software or only the driver.
If you have previously installed the Audigy 5/RX driver, you MUST run this utility.
As the KillDrv verify the driver version installed, running it won't do any harm, even if the driver version is not affected.
HOW TO INSTALL THE GAMEPORT DRIVER
You can find a Gameport\ReadMe.htm file in the folder where you unpacked the Support Pack.
Just follow the steps shown in the screenshots.
WINDOWS 8.1 OR LATER DOES NOT SAVE SETTINGS
- Configure all settings and shutdown. Your settings will be saved.
- This does not work if you disable Fast startup permanently or temporarily (by holding the Shift key while shutting down).
- On Windows 10 you need to run the application with Administrator privileges (right-click and choose Run as Administrator). This is valid for all applications used to configure the card.
OpenAL 2D benchmark in RightMark 3DSound crashes your system
The included driver for Windows Vista or later has a bug that crashes your system if you run the OpenAL 2D benchmark using 63 buffers.
No problem With 62 or fewer buffers.
OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D1) - ctoss2k.sys
There is no DirectSound hardware acceleration on Windows XP 64-bit (x64) with 4GB RAM or more
The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
Workarounds:
- install the 32-bit (x86) version of Windows XP.
- limit to less than 4GB the amount of RAM available to Windows.
- enable the "Memory Hole" setting in the BIOS Setup, if your motherboard supports it.
- install and use Creative ALchemy to convert the DirectSound API calls into OpenAL, which is not affected by this issue.
Karaoke effects make the audio play in mono
You can avoid this issue by using EAX Console to enable Karaoke effects. Audio Console is affected by the issue.
Optionally, follow the steps below.
Open EAX Settings, select a Karaoke effect, then click the Edit button.
Click on the Source (Wave) tab and change the Original sound to 100% and Pitch Shift to 0%. Click the Save environment button.
Repeat the steps for all Karaoke effects.
These changes will be valid only for the current speaker configuration. If desired, repeat the same process for each speaker configuration.
MediaSource DVD-Audio Player system requirements
- 32-bit edition of Windows XP or later
- any Audigy 2, Audigy 2 ZS or Audigy 4 card
Built-in Decoder on Windows Vista or later
To use the built-in decoder, make sure it is enabled in Audio Console.
Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
When you restart your computer, the Tone settings (Bass and Treble) are not applied.
Just readjust one of the controls one time per boot.
Equalizer and EAX effects are not available when using OpenAL or ALchemy
Only Tone (Bass and Treble) and CMSS 3D (CMSS, CMSS2 and Stereo Surround) features are available.
There is no sound in games with OpenAL support
Disable Advanced EQ and Special FX by selecting "No effect" before running the game or program.
Equalizer settings are not applied after using OpenAL or ALchemy
After you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are applied.
Just run Equalizer and the saved setting is loaded automatically.
Tone settings are lost when speaker configuration is changed
Bass and treble settings reset to their default values when speaker configuration is changed.
Download:
Filename: Audigy_SupportPack_5_3.exe
File size: 120 MB
CRC32 hash: 76110093
SHA- hash: 1001EB673EAF532EA10B2C986F1F4046D52F6771
Mirrors: Google Drive
All files are property of Creative Technology Ltd, unless otherwise noted.

Originally Posted by Dave_
Please help me daniel_K. All I want to do is send 5.1 sound to my Sony amp (SRT-DH520). I have purchased a new SB Audigy 5/Rx [CFC0] and when I install from your pack everything looks great until I toggle the "Enable Dolby Digital Live". Then I get no sound output at all. And when I try to test the signal through the audio settigs it says "The device is being used by another application. Please close any devices that are playing audio to this device". I cant think of any other device running. When I untick the Enable Dolby Digital Live I can get stereo sound again. The DDL is authenticated. The cable is working. The amp is fine. I neeeeed help....
Unfortunately I don't have a sample card to test personally and don't know anyone with an Audigy 5/RX.
Anyway, I have a suggestion.
Run EndPtUtl.exe found in the Audio Console installation folder.
If the issue still persists, try to use the Digital Output (Coaxial/Optical) of another device, provided that you have any on your computer.
EndPtUtl.exe enables the use of any device for outputting encoded audio.

Latest Front-End Support pack - Report Designer

Hi,
We are having some formating related issues in Report Designer in some of the Finance reports. I believe this is because of missing latest Support Packs or Patches front end.... for example, in report designer we unable to see the settings in the property window (on left) to display column headings on each page.
We are on front-end pack: BI Add-on 7.10, Support Pack 5, Revision 529.
Back-end: Support Pack 16.
Is this the latest one (for Front-end)?
If not, can you please let me know what is the latest support pack/patches available?
Thanks.
Samay
Edited by: Samay Mehta on Jun 11, 2008 10:28 PM

service.sap.com/swdc
Support packages and patches>Entry by application group>
Support Packages and Patches"> SAP Frontend Components"> SAP GUI FOR WINDOWS" >SAP GUI FOR WINDOWS 6.40>win32
also check
Using the BI 7.x Add-On for SAP GUI 7.10 - Requirements
hope this helps.
In general, the frontend patches are released at the same time as backend patches...
Therefore,usually
FEP9 is released with SPS9.
FEP10 is released with SPS10.
FEP11 is released with SPS11
FEP16 is released with SPS16
Hope it Helps
Chetan
@CP..

Support pack level issue in Standard Finance Program.

Hi Everyone,
                i have an issue which is related to Finance. Actually, Finance People are Using a Standard Report (FS10N) - GL Account Line item display. There,Vendor and Customer Details are not displayed (Customer/Vedor Filed is empty) for the normal GL Account. But for the Reconsalation GL accounts they are able to see.
               For this issue SAP released an SNOTE 1107639 and correction delivered in SAP_APPL support pack 12.And we already applied it in the system and our current SAP_APPL level is 14. Though it is already available why the problem is still persist. Another thing is, for the same issue there is another SNOTE 1034354 which guides to enhancement thro' some BADI work in standard program.
              My question is that if the correction is available in a patch and that is imported as well in to system without any error then it should resolving the problem.but in this case why it does not work out or what could be the reason behind this. As a Basis admin i would like to know.
Thanks&Regards,
Siva

Hi Siva,
Your query is obsolutely acceptable...
After supportpack update some times database will not be synchronised with the new updates.
and more over it seems there is a complete issue with SAP side.... there is only one option in u r hand now just restart the system.but please make sure to take the down time...and check whether the correction is working or not..if not then no luck u need to contact SAP global team and ask them why the corrections are not working properly..
Regards,
Srini

Support packs for CI + App servers

HI,
I worked mostly with Central Instance / Oracle DB only. I have done upgrade for Kernel / Oracle-Opatches and ABAP/ JAVA support packs. Now I have to implement these in production environment where it has one central instance and 3 app servers. I would lilke to know, what difference it makes, for Kernel upgrade / Oracle Patches / ABAP and Java support packs. What should I take care in terms of stopping ./ starting services
Would appreciate your feedback.,
Thanks,
Raj

Hi Raj,
For Application server what type of scenior you are using.
Did you made share of /usr/sap/ or /sapmnt to you application sever.
if yes, then you have to just upgrade the kernal in CI & not in Apps
If no, then you have to manually upgrade the kernal on CI & apps.
Thanks
Anil

Errors in Runtime workbench after support pack stack 12

We have installed support pack stack 12 and now the runtime workbench - component monitoring is not working. I get a page of errors. here are some of the errors
Unknown error: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:250: cannot resolve symbol symbol : method getTestModel () location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel CompTestModel testModel = cmMainModel.getTestModel(); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:283: cannot resolve symbol symbol : method getTextFromCore (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_tray_0.setTitle( cmMainModel.getTextFromCore("component_monitoring") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:391: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_listBoxItem_0.setValue( cmMainModel.getText("all_lbi") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:415: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_listBoxItem_1.setValue( cmMainModel.getText("red_lbi") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:439: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_listBoxItem_2.setValue( cmMainModel.getText("redYellow_lbi") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:486: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_button_0.setText( cmMainModel.getText("go_button") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:647: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_button_1.setText( cmMainModel.getText("tree_view_button") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:662: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel String label = cmMainModel.getText("switchToTableView"); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:703: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_button_2.setText( cmMainModel.getText("ccms_button") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:808: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_group_1.setTitle( cmMainModel.getText("searchResults_group") );
I have done the java support pack again to make sure it was installed properly.
Thanks,
Dede Logan

Well after the SAP XI server was restarted and I tried to go back into the runtime workbench and then into the Component Monitoring I am getting another error.
Unknown error: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_jsp_error1117123949279.java:74: setFeedbackToUser(com.sap.aii.rwb.web.util.Feedback) in com.sap.aii.rwb.web.application.model.AppMainModel cannot be applied to (com.sap.aii.rwb.util.web.Feedback) appMainModel.setFeedbackToUser( ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_jsp_error1117123949279.java:79: setFeedbackToUser(com.sap.aii.rwb.web.util.Feedback) in com.sap.aii.rwb.web.application.model.AppMainModel cannot be applied to (com.sap.aii.rwb.util.web.Feedback) appMainModel.setFeedbackToUser( ^ 2 errors .
does anyone know how to correct this error or what the cause of the error.
dede

Error occured while tranferring file in support pack

I am Applying support pack in my QAS Server. When I have apply Support Pack of ABAP from SAPKA70009 to SAPKA70012 . It proper work. But when I am applying SAPKA70013
via Frontend it give messege.
An error occured while tranferring file
'E;\sapdownload\SupportPack\KA70013.CAR'from the
frontend computer.
In my PC from where i am applying Patch . All drive space is ok and In my QAS server all file system is OK.
Where is the problem.
Thanks
manu

quality:qasadm 4> SAPCAR -xvf KA70013.CAR
processing archive KA70013.CAR...
x EPS/in/CSN0120061532_0027618.ATT
x EPS/in/CSN0120061532_0027618.PAT
what is the location of this extracted file? just move the extracted file into /usr/sap/trans/EPS/in then
Now When I login in QAS server in Client 000 via DDIC.
When I run SPAM and Load package from Application Server
It ask SPAM Confirm Load
path of EPS inbox :/usr/sap/trans/EPS/in
Do you want to Upload OCS package from EPS inbox
I press Yes
Regards
Subhash

What is support Pack?

Similar Messages

Maybe you are looking for