What is Syn to Asyn bridge

hi all,
it is one interview question.
what is Syn to Asyn bridge.
vijay

Hi Vijay,
You can use a sync/async bridge to connect a synchronous system to an asynchronous system. The synchronous request is converted to an asynchronous request in the module processor and sent.
The asynchronous system sends a response to a sender adapter. In the module processor of the sender adapter, this response is forwarded to the module processor of the original receiver adapter, where it is sent as a synchronous response of the waiting synchronous request.
Please have a look upon :
http://help.sap.com/saphelp_nw04/helpdata/en/43/65d4dab39b0398e10000000a1553f6/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
*Pls: Reward points if helpful*
Regards,
Jyoti

Similar Messages

Syn-Asyn Bridge and correlation

Regarding Sync-Asyn ,I have gone thru these blogs...
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
I am not able to do a end to end scenario...using this ....So could any one give me a step by step guide for the syn-asyn Bridge.
And also step by step for correlation...
Please help me in this regard....
<Moderator note: Moved to more appropriate XI forum>
Edited by: Mike Pokraka on Jul 7, 2008 10:09 AM

Regarding Sync-Asyn ,I have gone thru these blogs...
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
I am not able to do a end to end scenario...using this ....So could any one give me a step by step guide for the syn-asyn Bridge.
And also step by step for correlation...
Please help me in this regard....
<Moderator note: Moved to more appropriate XI forum>
Edited by: Mike Pokraka on Jul 7, 2008 10:09 AM

Regarding Syn-Asyn Bridge

Hi All,
Can any one explain the following:-
In Syn-Asy bridge, we are using Reveiver Step( open Syn/Asyn), Send step(Asyn), Receiver step(Asyn), Sendstep(close syn/Asyn bridge). In this case receiver is Asynchronous system, so we are taking response from Asy system?(i.e., 3rd step from above flow). This means receiver system in called as synchronous ( send step-request, receive-step response). Please explain why we are taking response from Asyn system in syn/asyn bridge?

Hi Ajay,
As you said is perfectly correct that we receive response from the Asynch system but synchronously.
As in the synch/asynch bridge, the synchronous business system sends request synchronously to the Integration Server (BPE) which in turn forwards that request asynchronously to the aynchronous business system(receiver). This receiver sends the asynch response to BPE back which is then sent back as anch response to the sender that is the synchronous business system.
Also refer to the topic Sync/Async Communication in the following link
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Also see the blog:
/people/henrique.pinto/blog/2007/08/02/syncasync-scenarios-without-bpm
Regards,
Shibani
*Reward with points if helpful*

BPM correlation and Sync-Asyn Bridge....

Regarding Sync-Asyn ,I have gone thru these blogs...
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
I am not able to do a end to end scenario...using this ....So could any one give me a step by step guide for the syn-asyn Bridge.
And also step by step for correlation...
Please help me in this regard....

Hi,
Defining Sync/Async Communication
To enable the communication between a synchronously calling business system (synchronous outbound interface) and an asynchronously called business system (asynchronous inbound and outbound interface), you can define a sync/async bridge in an integration process. You can only define one sync/async bridge for each integration process.
You can also achieve sync/async communication by using the JMS adapter. If you do not have any particular demand for monitoring or for troubleshooting, SAP recommends that you use sync/async communication in the JMS adapter instead. The advantage of using the JMS adapter over synch/async communication using an integration process is a significant increase in system performance.
See: Async/Sync and Sync/Async Bridge in JMS Adapter
Structure of a Sync/Async Bridge
The following table outlines the minimum components of a sync/async bridge:
Step
Use
Receive step to open the sync/async bridge
Receives the message request from the synchronously calling business system and opens the sync/async bridge
Asynchronous send step
Sends the received message asynchronously to the asynchronously called business system
Receive step
Receives the message from the asynchronously called business system
Send step to close the sync/async bridge
Sends, for example, the response from the asynchronously called business system to the synchronously calling business system
Performance Considerations
If you insert additional steps in the sync/async bridge, the synchronous time is increased correspondingly. If the time that elapses before the sync/async bridge is closed is too long, this can lead to problems.
Fault Messages
It is currently not possible to send fault messages back to the synchronously calling business system. If you want to return error statuses to the synchronously calling business system, you can define a field for an error indicator in the message that is sent to the synchronous interface.
Procedure
Define a Receive Step to Open the Sync/Async Bridge
       1.      Insert the receive step to open the sync/async bridge in the integration process.
You can do this at the following points:
○       Directly after the start marker
○       As the first step in a block if the block is the first step of the integration process and if it has the mode Standard
○       As the first step in a fork. If the fork already contains some starting receive steps, the Start Process indicator is automatically reset for these steps.
       2.      In the object area, define the container element that receives the synchronously sent message.
Specify an asynchronous, abstract interface in the container element. The message must correspond to the request message of the synchronous interface used to receive the message.
       3.      Select this container element in the Message field in the properties area of the receive step.
       4.      In the Mode field, select Open S/A Bridge.
       5.      Select the Start Process field.
The receive step to open the sync/async bridge must start the integration process. There must be no other receive steps to start the integration process.
       6.      Specify the synchronous interface for receiving the message from the synchronously calling business system. The message type of the message to be received and the request message from the synchronous interface must be identical.
Define an Asynchronous Send Step
       7.      Insert a send step that sends the received message asynchronously to the asynchronously called business system.
See also: Sending Messages from Integration Processes Asynchronously
Define a Receive Step
       8.      Insert a receive step that receives the message from the asynchronously called business system.
Define a Send Step to Close the Sync/Async Bridge
       9.      Insert the send step at the required position in the process definition.
Do not insert the send step in a loop, block, or fork.
   10.      In the Mode field, select Close S/A Bridge.
The integration process must not contain any further send steps to close a sync/async bridge.
   11.      In the Opened By field, specify the receive step that opened the sync/async bridge.
   12.      In the message field, specify the message that is sent to the synchronous interface.
This message must be of the same type as the response message from the synchronous interface that you specified in the opening receive step.
Example
You can find an example of a sync/async bridge in the Integration Repository under SAP Basis à SAP Basis 6.40, namespace http://sap.com/xi/XI/System/Patterns under BpmPatternSyncAsyncBridge.
For a description of the example, see Example: Sync/Async Communication.
Reg,
suresh

Correlation and Sync Asyn Bridge

Regarding Sync-Asyn ,I have gone thru these blogs...
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
I am not able to do a end to end scenario...using this ....So could any one give me a step by step guide for the syn-asyn Bridge.
And also step by step for correlation...
Please help me in this regard....
<Moderator note: thread locked. I moved your last post to XI, please do not post duplicate questions>
Edited by: Mike Pokraka on Jul 7, 2008 1:00 PM

Regarding Sync-Asyn ,I have gone thru these blogs...
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
I am not able to do a end to end scenario...using this ....So could any one give me a step by step guide for the syn-asyn Bridge.
And also step by step for correlation...
Please help me in this regard....
<Moderator note: thread locked. I moved your last post to XI, please do not post duplicate questions>
Edited by: Mike Pokraka on Jul 7, 2008 1:00 PM

Sync-Asyn Bridge

Hello friends,
Could any one give information or blog on Synch -Asyn Bridge used in HTTP --> RFC scenario

Hi,
Refer this..
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
BPM Sync- Async Bridge
Pipeline timeout error
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3d59c90-0201-0010-ac83-cfd0071f095a
Who to manage TimeOut in BPM ?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eb5cc090-0201-0010-5284-fd5376b01934
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
regards,
vasanth.

Doubt on Syn/Asyn Bridge scenario without BPM

I followed the how to guide How To Realize a sync-async and async-sync bridge within the Adapter Framework,but issue still exists.
Its a File(QoS:BE)<=>Idoc scenario
1 File adapter sends a sync booking request to idoc(MSG type: FLIGHTBOOKING_CREATEANDRESP)
2 The idoc creates a booking in its system and then sends a async confirmation response(MSG type:
FLIGHTBOOKING_SENDRESPONSE) to the sender(sync file adapter)
In ID, there are 2 receiver determinations and 2 IF determinations for the request and the response.
Sender business system: NWB_FileSystem_XML
Sender CC: Syn_SenderChannel_FileXML
 Parameters Tab
Qos:BE
Poll Interval(secs) : 60
Processing Mode: Delete (Successfully processed files are deleted)
Adapter-Specific Message Attributes: Select File name
Module Tab
Processing Sequence
 AF_Modules/DynamicConfigurationBean 0
 AF_Modules/RequestOnewayBean 1
 CallSapAdapter 2
 AF_Modules/WaitResponseBean 3
Module Configuration
 0 key.0 write http://sap.com/xi/XI/System/File FileName
 0 value.0 message.correlationId
 1 passThrough true
 3 timeout 40000
Receiver CC: Dummy_ReceiverChannel_FileXML
 Parameters Tab
 Adapter-Specific Message Attributes: Select File name
Module Tab
Processing Sequence
 AF_Modules/DynamicConfigurationBean 0
 AF_Modules/NotifyResponseBean 1
Module Configuration
 0 key.0 read http://sap.com/xi/XI/System/File FileName
 0 value.0 message.correlationId
 1 timeout 40000
Receiver business system: nwb_107
Receiver CC: GeneratedReceiverChannel_Idoc
Agreements
Sender Agreement for NWB_FileSystem_XML uses CC: Syn_SenderChannel_FileXML
Receiver Agreement for NWB_FileSystem_XML uses CC: GeneratedReceiverChannel_Idoc
Receiver Agreement for nwb_107 uses CC: Dummy_ReceiverChannel_FileXML
The problems is:
The scenario only executes once and there are 2 XML messages in SXI_MONITOR with status Processed successfully.One of the message from idoc to file has the Acknowledgement MSG status still awaiting acknowledgement
In the runtime workbench,the status of CC:Syn_SenderChannel_FileXML is correctly configured and started.The latest Processing Details of Syn_SenderChannel_FileXML is 3/13/07 9:13:12 PM Processing started
Regards
Ming

The trace of the message from IDOC to File in SXI_MONITOR:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">User: PIAPPLUSER</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPNWB</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = NWB</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2007-03-13T13:13:12Z UTC+8</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = DBD16497D8475CF186920017314ECFFB</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0007</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0007</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface FLIGHTBOOKING_SENDRESPONSE.FLIGHTBOOKING_SENDRESPONSE01*</Trace>
<Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = NWB</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2007-03-13T13:13:12Z UTC+8</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO6___0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = NWB</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2007-03-13T13:13:12Z UTC+8</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">Interface Mapping http://sap.com/xi/XI/Demo/Agency FBOConfirmation_AirlineIDoc2Agency</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV" />
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Async processing completed OK.</Trace>
<Trace level="1" type="T">system-ID = NWB</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2007-03-13T13:13:13Z UTC+8</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>

Syn-Asyn Bridge

Hi all,
 https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Integration Directory:
 I fallowed 3 flows (wizard) for the fallowing scenario.
 Business system / business service (soap) to Integration process
 Integration Process to Business system (RFC)
 Integration Process to Business system (File)
When I am sending request to Integration server, it is giving the error like
XIServer:TOO_MANY_RECEIVERS_CASE_BE:
IN SXMB_MONI
<SAP:Stack>Multiple receivers are not permitted in synchronous calls</SAP:Stack>
Can any body tell How to solve this problem (Configuration step by step)

Hi all,
 Can any body tell me the configuration steps for this weblog
 https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]

How to realize a Sync-Asyn Bridge

Hey Folks,
I was trying to 'decode' whatever is written in the How to guide (Realize a sync - async and async - sync bridge in the adapter framework). Thanks to Bhavesh he posted the thread on the Async - Sync part and so i thought i would figure out the Sync - Async part.
Ok so here is what i have done till now (with no success);
its a HTTP <-> XI <-> File
So;
2 DT/MT for HTTP, 2 DT/MT for file
1 MI outbound sync -> http
1 MI inbound sync -> File
the 2 mappings and the 1 IM
In configuration;
1 rec. file adapter and 1 sender file adapter
the configuration is as usual for a sync scenario; except for the sender agreement for the sender file adapter, i configure a dummy sender agreement with dummy interface and dummy namespace but the original CC created.
In the Recv. file channel module part;
1 AF_Modules/RequestOnewayBean Local Enterprise Bean 2
2 CallSapAdapter Local Enterprise Bean 0
3 AF_Modules/WaitResponseBean Local Enterprise Bean 1
2 passThrough true
in the sender file channel;
1 AF_Modules/NotifyResponseBean Local Enterprise Bean 1
So any of you guys who did something on that document, i hope can throw some light
Cos i am sure i am missing something here !!!
~~ShaBZ

HI,
Are you using BPM or not??
Can you plz tell me the SP number/version.
I hope Sync - Asyn without BPM is possible with latest SP.
Please see the below links
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
Searching for a BPM scenario
With BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Regards
Chilla..

What is the Roles Of Bridging Account

*What Are The Roles Of These Accounts Bridging, Non-Invoiced Sales Orders And Non-Invoiced Revenue in Periodic Account Assignments form? [ID 1335054.1]*
The Expense account is there to accommodate European accounting practices.
The Bridging account (as seen in WIP accounting classes) is used only in France.
The bridging account (and possibly others) was included at the request of the Global Accounting Engine team on behalf of France in the setup form at design time; but it has never been used as it was decided that transfer To GL would remain manual for the moment. In other words, today PAC only generates distributions based on GAAP/Brazil accounting.
In other words: In US accounting, when you put something in inventory it is accounted as an asset, in France it is accounted as an expense; so during a period you total all expenses and at the end of a period in order to do a fiscal Profit and Loss, you "convert" to assets by using a bridging account : you debit the inventory account and credit the bridging account. This is done by Product Nature: So you have a Bridging account for raw materials, for finished goods and semi-finished.
The fields 'Non-invoiced Sales Orders' and 'Non-invoiced Revenue' was set up with a view to replacing the functionality (used in Europe) that is currently provided by the Global Accounting engine (AX). However, this has not yet been implemented in the apps - which currently support only US GAAP & Brazilian accounting as methods of generating distributions from PAC.
User Guide
2 – 72 Oracle Cost Management User’s Guide
Bridging: This account is optional.
You can also optionally enter an Analytical Invoice Price Variance, Analytic a l Purchase Mirror, Non–Invoiced Sales Order, Non–Invoiced Revenue, Analytical Revenue Mirror, Analytical Margins of Goods Sold, and Average Cost Variance account.
Edited by: Deepkumar Sivanandan on Aug 25, 2012 11:56 PM

Hi Thaman,
Responsibility of functional consultant in ESS/MSS:- Functional configuration under SPRO > Employee self service and manager self service, then preparation of Functional specification design (FSD) if any deviation from standard SAP, Unit test plan preparation and all functionailty testing
Responsibility of Technical consultant:- Preparation of Technical specification design document (TSD), activation of work flow and creation of workflow if additional is required. Creatio of form like vacancy requisition form, new position creation form etc.
Also some kind of technical configuration is there in SPRO for workflow and form
Regards,
Purnima

Bridge Help | What's new in Adobe Bridge CC

This question was posted in response to the following article: http://helpx.adobe.com/bridge/using/whats-new.html

Dear Adobe, Please add the Export panel back to Bridge! The ability create presets to batch save RAW files to JPEG in a specified size was/is critical to my workflow. I like that I could just drag/drop the files to my custom "Save to Hard Drive" preset, click one button, and Bridge would process and save any number of files in the background. I can't believe the official solution is for users to go to Lightroom to export photos they are already managing in Bridge/Photoshop. If I'm using Bridge, it's because I prefer it to Lightroom. What about the users who don't even have access to Lightroom? What are they supposed to do (besides buy and learn Lightroom)? I just can't understand why when I am spending $50/month for this software, Adobe is removing more features than it's adding?

What is equiv to Adobe Bridge Import in iPhoto

I have migrated all my photos (over 20,000) from PC to Mac and have taken the plunge. I used to use Adobe Photoshop Elements 5.0 in Windows and used the Organizer to import my media cards. When I did that, it would layout the pictures in a directory called "2009 05 30" for the photos taken today, for example. I would then tag then in Adobe for later searches. I would also use Picasa for a simple method of access and organization.
In addition, I would make a DVD disk of all the images for a time period and store that offsite. That disk contains the originals of my photos - I would manually fill up the DVD and write the time range and photo number range on each one.
So, now my questions.
1. How can I import photos to a similar directory structure instead of into the central iPhoto library?
2. If I cannot import like that, how can I easily burn a DVD of all images imported since a certain date, or image number.
3. Or should I use the Canon EOS Utility to import the card to a directory structure, then import from disk in iPhoto.
I know the "best practice" in this forum is to let iPhoto manage the entire library, but then my library would be tens of gigabytes in size and would not be easy to backup to to a single medium. (Unless I back up to another hard drive and save that offsite).
Curious what others do. I am playing with Aperture, Lightroom and will also try Elements 6.0 for Mac and see what meets my needs.
Thank you.
Jeff

jsundin
1. How can I import photos to a similar directory structure instead of into the central iPhoto library?
Use Image Capture - or any other app you prefer - to move the files from your Camera card to your preferred Location. Then run a Referenced Library: Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
As you have read we strongly recommend against this method - especially for inexperienced users:
1. Import and deleting pics are more complex procedures
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
2. If I cannot import like that, how can I easily burn a DVD of all images imported since a certain date, or image number.
Easy: Select the Event/Album or files that you wish to back up: then File -> Export, Kind: Original. Export to a folder on the desktop and burn that.
Backing up to another HD is actually the best way to go. DVD's rot over time. HD's are inexpensive, dynamic and very easy to use.
My back up strategy:
My Library lives on my iMac.
It’s Backed up to two external hard disks every day. These disks are permanently attached to the iMac. These back ups run automatically. One is done by Time Machine, one is a bootable back up done by SuperDuper
It’s also backed up to a portable hard disk when ever new photos are added. This hard disk lives in my car. For security, this disk is password protected. For this job I use DejaVu because it makes a simple back up that is clear and can be tested easily without doing an full restore.
I have a second off-site back up at a relative’s house across town. That’s updated every 3 or 4 months.
My Photos are backed up online. Personally I use SmugMug but there are many options including flickr. However, check the terms of your account carefully. While most sites have free uploading, you will often find that these uploads are limited in terms of the file size, or the bandwidth you can use per month. For access that allows you to upload full size pics with no restrictions you will need to pay.
Every couple of months I test the back ups to make sure they are working correctly. It’s very easy to mis-configure a back up application, and the only way to protect against that is to do a restore.
Aperture and Lightroom are much more powerful apps that iPhoto - and a touch more expensive too . Elements has no organising capability on the Mac. For that it comes with Bridge. Some people like Bridge. Never met one, but some do.
Regards
TD

Usage of sync-asyn bridge problem in BPM in particular scenario

scenario is to send a Stock availability check from one suboffice to other suboffice which does not involve any R/3 activities.
I need to send SOAP request to XI, BPM receives request through synchronous interface.
BPM has to send request to DB through synchronous interface and gets response
Questions:
1) whether sync-async bridge comes into picture in BPM or not
2) i am really confused how many Data types,Message types and message interfaces i have to create.
3) what are all the message interfaces i have to create
4) abt Integration Directory activities.
Its would be appreciated if u tell step by step.
Its urgent..
Thanks & Regards.,
Pushparaju.B

I have created these things as of now , but problem in interface mapping
Interface Objects
Data Types
1)DT_Soap_request
2)DT_Soap_response
3)DT_Jdbc_request
4)DT_Jdbc_response
corresponding message types
1)MT_Soap_request
2)MT_Soap_response
3)MT_Jdbc_request
4)MT_Jdbc_request_response
Message Interfaces
1)MI_SOAP (inbound asynchronous) MT_Soap_Response and MT_Soap_Request input message
2)MI_JDBC (outbound asynchronous) MT_Jdbc_response output message and MT_Jdbc_request input message
Mapping Objects
Message mappings
1) MM_Jdbc_Response_Soap_Response where MT_Jdbc_request_response and target message is MT_Soap_response
2) MM_Soap_Request_Jdbc_Request where source message is MT_Soap_request and target message is MT_Jdbc_request
Error in interface mapping is
IM_Soap_Request_Jdbc_Request has interfaces source is MI_JDBC and target is MI_SOAP
 No object found for message mapping in request tab
can anyone help me please its urgent.
why its not detecting the message mapping in request tab
Thanks & Regards.,
Pushparaju.B.

What Device to Buy to Bridge to a WRT54G

Hi Folks,
I've setup an area in my garage with a couple of PC's and now want to install a wireless bridge for connectivity to my WRT54G on my home network. Before I run down to Walmart and buy the wrong device, can someone recomend what is the best Linksys product to use to for my application?
My preference is to be able to plug 2 cat 5 cables from my garage PC's directly into a wireless bridge device.
Thanks.

You need to purchase WET200(Wireless Bridge)...To know more about the Bridge see the link here

Whats happened to output in Bridge CC??

Please tell me that the only way to make a pdf is not via the god awful contact sheet II tool as its slow and much more limited ... its just taken me 20 mins to do something I usually do in 1!! not very happy at the moment as I removed bridge cs6 from my system assuming that the newer version would be better!

ok solved the problem myself .... for anyone else in the same boat you can add the output module yourself .... why its not there in the first place adobe only knows (stupid if you ask me) anyway follow the bellow link and you'll find the download and instructions of how to add it to bridge cc
http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html#Install%20the%20Adob e%20Output%20Module

What is Syn to Asyn bridge

Similar Messages

Maybe you are looking for