What is t-code SM66? what is the use of it?

hi all,
what is t-code SM66? what is the use of it? plz tell me with an example and steps
thanks,
jack

Hi Jack,
The T-CODE SM66 is Global servers work area. That means it is having all the servers running with in an organization/company etc. When you again double click on any one of the server at that time it shows SM50 of that particular server. SM50 is local server work area and SM66 is global work area.
Check this link
http://help.sap.com/saphelp_nw70/helpdata/EN/ed/a9bb3f8e236d3fe10000000a114084/frameset.htm
Award points if helpfull
Thanks,
Sujeet

Similar Messages

What is t-code SHD0's 'Variant Groups' used for?

hi all:
What is t-code SHD0's 'Variant Groups' used for?
It seems can't work,who can help me?
thanksss.

Variant groups
An extension of the standard variants is involved in the variant groups; the standard groups are often insufficient:
Different users (groups) should work with different variants;
Some users should be able to execute a transaction with different variants.
This is possible - in addition to the advantages that the standard variants offer - with variant groups:
Variants from variant groups are automatically applied, but only for users that are assigned to them.
A user can be assigned to several groups and can change the assignment.
The values of the groups are not applied in the batch input mode.
If a transaction is started with another transaction variant, the values are not additionally applied to a variant group.
How are the variant groups maintained?
You can enter the group names on the "Variant Group" tab and maintain variant groups with the "Create" or "Change" functions.
The group name must be in the "correct" namespace.
In addition, there are two Where-Used Lists:
Which users are assigned to the group,
For which transactions the group applies.
Which transaction variants belong to the groups?
The name of a transaction variant that is to belong to a group meets the following naming conventions:
<Name of variant group><name of transaction code>. Example: A transaction variant is to be created for the XYZ transaction that belongs to GROUP1. The name of the transaction variant is then GROUP1XYZ.
Due to this naming convention, the group name must be in the "correct" namespace.
Transaction variants that (randomly) meet this naming convention do not necessarily belong to a group. The group assignment is activated by
1. Creating a group
2. Assigning users to this group
A transaction variant that belongs to a group can also be used this way, like a transaction variant without a group.
How are the transaction variants that belong to a group maintained?
Transaction variants that belong to a group are maintained in the same way as all other transaction variants, they are distinguished using a naming convention (<name of variant group> <name of transaction codes>).
They can be maintained in the "transaction variants" tab or in the "variant groups" tab. If you maintain them in the "variant groups" tab, you must always enter the transaction code so that the name of the transaction variant can be determined.
Under what conditions is a variant from a group applied?
A variant from a group is applied if users are assigned.
(Only for the assigned users, all other users get the original transaction with a variant from a different group.)
It is NOT sufficient to
Create a group
Create a variant that satisfies the naming convention.
How do you assign users to groups?
You can assign users in the "variant groups" tab in the "user assignment".
Enter the user name.
The user is assigned to the group with the "assign" function, but they see original transaction(s) or the transactions with variants from another group as the proposal.
The assignment of users to the group is deleted using the "delete assignment" function.
The user is assigned to the group using the "Set Proposal" function and the relevant transactions are started for this user with the corresponding variants.
The proposal is canceled with the "Cancel Proposal" function, the assignment itself remains.
If you enter the user names generically (*), you receive a selection screen in which you can
Choose whether assignments or proposals are to be changed
Further restrict user names (the group in the "all users from group" option has nothing to do with the variant group, it concerns the "user group for authorization check" from the user master record (logon data)).
By choosing "Execute", you receive a list in which you can further restrict the user selection. The "Save" function saves the assignments for all selected users.
If you want to start the report in the background, you can choose if just the list should be outputted, or if the database changes should also be performed.
If a user is additionally also to be able to execute the original transaction, he must be assigned to the "empty group", the allocation takes place in the same way, in this case, nothing is simply entered in the group name field.
Regards,
Joy.

What line of code do I need to use to run flashplayer offline in a HTML presentation?

I have a client who has had an HTML presentation built that uses Flashplayer when online, using the following lines of code:

             <div id="flashPreview">
                 <a href="http://www.adobe.com/go/getflashplayer">
                    <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
                 </a>
             </div>
He now wants to use it off line. What line of code to I need to add to the header to run Flashplayer on the local machine instead?
thank you

HI Mike,
thank you for your help. The file was built by someone else, so trying to get inside their head!!
There is coding for the expressInstall.swf:
// FLASH EMBED PART
                              var flashvars = {},params = {},attributes = {};
                              params.quality = "high";
                              params.scale = "noscale";
                              params.salign = "tl";
                              params.wmode = "transparent";
                              params.bgcolor = "#111111";
                              params.devicefont = "false";
                              params.allowfullscreen = "true";
                              params.allowscriptaccess = "always";
                              attributes.id = "flashPreview";
                              swfobject.embedSWF("preview.swf", "flashPreview", "100%", "100%", "9.0.0", "expressInstall.swf", flashvars, params, attributes);
but nothing for the swfobject_modified.js, where would I put it???
I really appreciate your help

How do I find out what an error code found on running the hardware test, means?

After running the hardware test on my Mac Pro I got an error code of: 4HDD/11/40000004: SATA (4,0) -- HOW DO I FIND OUT WHAT THIS MEANS?

It means your one of your SATA Hard drives is having trouble (or possibly your DVD drive, but not likley).
Got good backups? Now would be a good time to try to make some if you don't.

What is t-code or path see the error message while creating Purchase order

Hi,
I am creating PO and I have not maintained Info Record.While cretaing PO it is throwing warning message.Now I want to convert this to error message.How to do this.
Regards
Raghavendra Pai

Hi,
You can alter the message at SPRO->Materials management->Purchasing->Environment data->Define attributes of system message.
Here in the system message, go to message number 341, then change category from W to E.
Regards

What is error code 1009, what is error code 1009

what this matter?!!

hi
it is my information please help me
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.4.1.10
QuickTime 7.7
FairPlay 1.12.20
Apple Application Support 2.0.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.2 (333.2)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 0026AF601235B330
Current user is not an administrator.
The current local date and time is 2011-08-28 13:42:38.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 220
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.4.1.10 (x64) is currently running.
iTunesHelper 10.4.1.10 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {0899E75A-7C5C-4BE5-8599-FB42FC800F55}
Description:    TeamViewer VPN Adapter
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Thu Jan 01 03:30:00 1970
Lease Expires:    Thu Jan 01 03:30:00 1970
DNS Servers:
Adapter Name:    {17D24186-701E-4B0C-9DC8-3990844DF499}
Description:    Bluetooth Device (Personal Area Network) #2
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Thu Jan 01 03:30:00 1970
Lease Expires:    Thu Jan 01 03:30:00 1970
DNS Servers:
Adapter Name:    {48159626-69E6-45F9-933E-142AB53A01F2}
Description:    Realtek PCIe GBE Family Controller
IP Address:    10.10.10.123
Subnet Mask:    255.255.255.0
Default Gateway:    10.10.10.1
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 03:30:00 1970
Lease Expires:    Thu Jan 01 03:30:00 1970
DNS Servers:    217.218.155.104
        217.218.127.105
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    Yes
HTTP Proxy:    localhost:8118
SSL 3.0 Support:    Enabled
TLS 1.0 Support:    Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2011-08-28 11:38:54.

What is error code 1439

what is error code 1439

Hi lenshao,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like the iPod is getting a 1439 error. I would recommend that you read this article, it may be able to help the issue.
iPod: Can't restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439 - Apple Support
Cheers,
Mario

What is match code object?

hello all
what is match code object? how to use the match code objects in our program?

Hi ,
Match Code object is used to attach an F4 help to any field.
whenever you cant find any F4 help for any field you just attach an Match Code Object to the Parameter / Select options.
Match COde objects are like Search Help created in SE11. if you cant find any standard Match Code object then you can create a Search Help in SE11 and attach it to the field , then you will have the F4 Help.
Hope this is helpful to you.
Regards,
Vivek Shah

TS3694 what is a code 3194

what is a code 3194

Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

How do I unlock an iphone 5 with Sprint. The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?

How do I unlock an iphone 5 with Sprint 15.1 at IOS 7.0.6 IMEI 99 000320 012095 0 .
The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?

There is no such thing as an unlock code. Sprint may have processed the unlock, and then requested you restore the iPhone using iTunes to complete it. But that's it. There is no code to enter, and nowhere to enter it any way.
iPhone: About unlocking

I tried to backup computer contents, but could not because "finder can't complete the operations becaus some data in "....JPG" can't be red or written (error code-36)" What is this?

Question: I tried to backup my computer contents, cut coun't because "finder can't compelte the operation because some data in ........JPG (an iphoto image)
can't be read or written (error code -36) What is this error and how can I correct it?
Thanks,
betteyp

I am backing up on two different drives...one is on the time machine...the one I am having trouble with is a passport that I back up manually. I have not gotten a notice from the backup on the time machine that there is an error.
Before this error occured....the "event" that the photo was in emptied without me doing anything. This has happened before, when the total number of pictures that I have downloaded for the day, the events emptied overnight without me doing anything (????????)
Can you explain more what is happening.....
Thanks

What is the use of provision account in vkoa t.code

Hi,
i have a doubt regarding in vkoa t.code there are G/L Accounts column and Provisions column what is the use of provision column and what is the difference between these two.
i am waiting for u r replies.
Thanks & Regards,
Kishore.

Hi,
'The provision account is only required if there are conditions that are relevant for accrual, for example, rebate conditions. If this is the case, account determination takes place in the billing document with the field'
In other words it will be used to store the valuue of a( for eg.,Rebate) condition type in a different GL a/c for the periodic calculation of the total value of the same cond.type...
chk this thread for more clarity on Accrual
Re: Rebate Accrual Rate
Reg
JJ
Edited by: Jagsap on Jul 10, 2009 1:03 PM

HT201209 I have a credit in itunes account, but when I click on "redeem" it asks me for a gift cared or download code. what are the steps to access the credit I have so I can purchase more music?

I have a credit in my itunes account, but when I click on "redeem" it asks me to enter a gift card or download code. what are the steps to go in and be able to redeem the credit I have? If I go to an album that I want to use my credit on, the only choice I am seeing is to use the credit card on file. Help!

It says   at the top      under Redeem after I touched that:
          $14.73
Account: [email protected]   (my account name)
Enter your Gift Card or Download Coad

Does anyone know what this error code means?My itunes will not open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll."

Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

What is the use of T. code cj8g

Hi All,
Can anybody explain me what is the use of T.code CJ8G.If we execute this transaction. what is the effect on cost center and wbs element.before executing this Actual settlement. what configuration is to be done pior.
Thanks in Advance.
Chandu

CJ8G is a T Code which processes the settlement collectively. You create a varaint (group of projects) and the execute the settlement, which then moves the cost out of the WBS elements to any receiver such as cost centres etc.,
CJ88 processes the settlement individually.
For settlement to run, you need to do certain configuration and maintain the master data;
Configuration:
Allocation Structure (Source Cost Elements, Settlement cost element/By Cost Element)
Settlement Profile
Master data:
Maintain the settlement rules (receiver i.e, CTR-Cost Centre etc) on the WBS.
Regards
Sreenivas

What is t-code SM66? what is the use of it?

Similar Messages

Maybe you are looking for