What is Tcode for screation an instant selection screen

can anyone tell is there any SAP Transaction code to design selection screen instantly, instead of manully creating using select-option/parameters .
Moderator message: please use more descriptive subject lines from now on.
Edited by: Thomas Zloch on Sep 13, 2010 2:48 PM
Edited by: stetala on Sep 13, 2010 3:24 PM

Hi
I believe there is no such transaction available.
Regards
Abhii

Similar Messages

  • How to create tcode for modulepool program with selection screen?

    hi,
       How to create tcode for modulepool program with selection screen?
    thanks,
    sagar

    Hi,
    We need to goto SE80.
    In our program we right click on object name and goto create
    -> transaction. Enter the module pool program and screen number and save and activate.
    Or by SE93 also we can create a transaction code for our program.
    Hope ths helps.
    plz reward if useful.
    thanks,
    dhanashri..
    Edited by: Dhanashri Pawar on Jul 22, 2008 8:29 AM

  • What is Tcode for purchase order and purchse requisition.

    HI all
    What is Tcode for purchase order and purchse requisition.
    Thanks

    Hi Melanie,
    How are you trying to check for the PR number? Are you accessing it via Portal (IE) or the GUI?
    If you are trying to get the PR number for a SC through Portal. Then please follow the below process.
    Go to the SC > Related Documents tab
    The related Documents tab should have all the follow-on document number along with the type of document.
    If you are trying to get the PR number for a SC through GUI, then:
    Go to transaction BBP_PD in GUI > Give the Object Types as BUS2121 and the Object ID as the SC number and click on F8.
    Once you have opened the SC then scroll down till you get the Header Links and click on the line.
    This should display the document that is linked to the SC.
    Hope this helps.
    Regards

  • What is Tcode for display standard order.

    HI all,
    What is Tcode for display standard order.
    thanks

    hi,
    VA03 is the T-code for display of standard sales order.
      ME23n is the T-code for display of purchase order.
    Regards,
    Veeresh

  • Specify printer for payment summary, or select screen output

    Hi All,
    I have scheduled a Job using F110 tcode...with Run ID and identification...the job is continously running without any end...when i cancel the job..in job log entries i got "Specify printer for payment summary, or select screen output
    Message no. BFIBL02 615" ...what could be the reason behind this..do i need to specify printer any where??
    Kindly help

    Hi
    tru to check the variant you're using for the report to print the payment advises or the list of payment
    Here you need to indicate the printer
    Max

  • Popup Menu(F1- Help values) is not diaplying for a char at selection screen

    Hi,
    After executed the query, we are trying to get help (F4) values for info object Employee Group (EMPLGROUP) in the selection screen but it is taking long time nearly 1 hr and getting timed out. And for other Chars we are getting the help popup menu.
    for your info...     
    There are only 6 values are there in Employee Group master data table.
    And the characteristic settings in Business Explorer tab are as the following,
    Display u2013 Text
    Text type u2013 Default
    BEx description u2013 Short description
    Selection u2013 No selection Restriction
    Query Def. Filter Value Selection u2013 Only values in Infoprovider
    Query Execution Filter Val. Selection u2013 Only Posted Values for Navigation
    Can any one please suggest us which settings we needs to change to get the popup menu (help values) for Employee Group at selection screen and what is the reason for not displaying the help popup menu?.
    and can any one explain us about the setting "Query Execution Filter Val. Selection u2013 Only Posted Values for Navigation"
    Thanks & Regards,
    Raju. E

    Hi,
    I am getting the data aslo for Employee Group in the query when I drill down that char.
    But I dont know why it is taking long time and getting time out to display the popup menu for help values at selection screen.
    I think this is due to the below setting only at char level,
    Query Execution Filter Val. Selection u2013 Only Posted Values for Navigation
    and there are 3 opstions for the above seeting as below,
    1. Only values in master data
    2. Only values in Infoprovider
    3. Only Posted Values for Navigation
    Can any one help me, which opstion will solve the issue and can any one explain me what is the difference between 2 & 3
    Thanks,
    Raju. E

  • Code for execute button on selection screen to get result

    hi experts,
    I need a help for writing a code for execution button on selection screen.Like in normal report on abap editor
    we insert selection criteria like number and we get the result according that particular number on next screen.
    same thing i am trying here also. So i am writing a code on button that when i press the button it will go to the next
    screen according to the selection criteria.
    Plz help me helpful answers are appriatiated !!!
    Thanks & regards
    Vipul Gupta

    hi,
    In the OnAction write :
    1. get the values entered in selection criteria using :
    DATA lo_nd_cn_check TYPE REF TO if_wd_context_node.
        DATA lo_el_cn_check TYPE REF TO if_wd_context_element.
        DATA ls_cn_check TYPE wd_this->element_cn_check.
        DATA lv_ca_check LIKE ls_cn_check-ca_check.
      navigate from <CONTEXT> to <CN_CHECK> via lead selection
        lo_nd_cn_check = wd_context->get_child_node( name = wd_this->wdctx_cn_check ).
      get element via lead selection
        lo_el_cn_check = lo_nd_cn_check->get_element(  ).
      get single attribute
        lo_el_cn_check->get_attribute(
          EXPORTING
            name =  `CA_CHECK`
          IMPORTING
            value = lv_ca_check ).
    Now lv_ca_check has your value entered in Selection criteria.
    2.  write the select query to fetch data according to selection criteria.
        select *  from <table> into correponding field of table <internl table>
           where Field = lv_ca_check.
    3. Now in the internal table <internl table> you have values according to search criteria.
    4. Bind the internal table with node  which is binded to table to show data.
    lo_nd->bind_table( internaltable ).
    I hope it is clear .

  • What is Tcode for single delivery for all line items in PO

    Hi all,
    Sorry if it is a simple question, But I am from SD module. What is Tcode to create a single delivery documents for all line items in PO. I have 3 line items with Different materials having diffent quantities and there are different delivery dates and different delivery schedule dates. I need to create single delivery. Could you please tell me how to do it? What is the Tcode?
    Thanks
    Anil

    Hi,
    Inbound delivery T.code :VL31N,
    Regards,
    JS

  • What is good for performance calculation in select st. or in formual column

    Dear Friends,
    I would like to ask you regarding what is good for performance specially i'm developing reports for EBS .
    is it better to calcualte total of 5 columns in select statment directly or using formula columns to do this,
    Regards & Thanks
    Yas

    I'd focus on easily readable query, namely use formula column if otherwise the query get too long or too complicated to read/maintain. Have inherited many ugly long queries/reports and hate to maintain or fix bugs for them etc.

  • What is tcode for schema(list schema in BW3.5) in BI 7.0

    Hi all,
                If any of you know tcode for schema in BI7.0, pls let me know
    Thank you

    Hi Jr,
                Thanks for the reply.  I have old cubes (3.5) migrated into BI 7.0 environment and I have new cubes which are created under new (7.0 ) environment. When I am trying to do LISTSCHEMA I can able to pull up only old version cubes(3.5) migrated into new environment only. I am not at all seeing any other cubes.
    I hope this helps.
    Thank you
    Jason

  • Disable Screen-Input for checkbox in report selection screen.

    I have defined one Selection Screen parameter as follows:
    PARAMETERS: CCCDoc as CHECKBOX USER-COMMAND check DEFAULT 'X'.
    Now, When Selection Screen comes up I want to have this check box greyed out. I tried this code but is not working for me. What differently should I be doing?
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF SCREEN-NAME = CCCDoc.
          SCREEN-INPUT = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    Please advise.
    - Rohit.

    geeee
    I tried everything except capitalizing it. Even had tried quotes.
    Guess sometimes you do need someone to make it work for you
    Thanks Guys...Most appreciated.
    PS: Sorry aRs I wasnt able to award you both 10 pts...I tried. Thanks all the same.
    Message was edited by:
            rohit singh

  • Matchcode Object for ORGEH field in Selection-Screen

    Hi,
       I need to create a Matchcode Object for ORGEH field in my Selection-Screen. But, I want to have the selection Criteria as the Tcode: Po10 does. Please guide me how to do it. Is there any Standard Matchcode Object provided by SAP for this kind of functionality?. Please provide some kind of solution. I am in urgent need of this.
    Thanks in advance,
    Exertive.

    Hi,
    You can try the following are the search helps (matchcode objects) available for ORGEH (Org Unit).
    HRBAS00OBJID
    RESP_ORG_UNIT
    H_T527X                          Help View for Organizational Units                         
    H_T527X_1                        Seach help for T527X                                       
    Regards,
    Suresh Datti

  • Search help for custom entries in selection screen

    Hi Gurus,
    I have a requirement of adding four entries as a search help to a selection screen field P_TABLE.I tried using the function module F4IF_INT_ TABLE_VALUE_REQUEST as below.I want to add four entries Revenue,Cost,RIH and Summarised WBS Actual Data for the selection screen field P_TABLE but the problem is the function module is not getting triggered.
    See the code below.
    REPORT  Z_DEL_OHTABLE.
    DATA: V_RESPONSES(6),
          V_TEXTS LIKE ALDBOUT,
          V_PROG TYPE SY-REPID,
          V_DYNNR TYPE SY-DYNNR.
    DATA: begin of it_openhubs occurs 0,
          v_tabname type c length 30,
          end of it_openhubs.
    DATA:
           it_return type STANDARD TABLE OF DDSHRETVAL,
           wa_return like line of it_return,
          l_i_field_tab TYPE STANDARD TABLE OF dfies INITIAL SIZE 0,
          l_i_dynpfld_mapping TYPE STANDARD TABLE OF dselc INITIAL SIZE 0.
    SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE title.
      parameters:P_TABLE(30) type c.  " USER-COMMAND UPD,
    SELECTION-SCREEN END OF BLOCK B0.
    V_PROG = SY-REPID.
    V_DYNNR = SY-DYNNR.
      it_openhubs-v_tabname = 'Cost and Expense'.
          append it_openhubs.
      it_openhubs-v_tabname = 'Revenue'.
      append it_openhubs.
       it_openhubs-v_tabname = 'Revenue in Hand'.
       append it_openhubs.
        it_openhubs-v_tabname = 'Summarised WBS Actual Data'.
        append it_openhubs.
        CLEAR IT_OPENHUBS.
    INITIALIZATION.
      title = 'OH TABLE DELETION- DELETE CAREFULLY'.
    START-OF-SELECTION.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_TABLE.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
        DDIC_STRUCTURE         = ' '
          RETFIELD               = 'v_tabname'
        PVALKEY                = ' '
         DYNPPROG               = V_PROG
         DYNPNR                 = V_DYNNR
         DYNPROFIELD            = 'P_TABLE'
        STEPL                  = 0
        WINDOW_TITLE           =
        VALUE                  = ' '
         VALUE_ORG              = 'S'
        MULTIPLE_CHOICE        = ' '
        DISPLAY                = ' '
        CALLBACK_PROGRAM       = ' '
        CALLBACK_FORM          = ' '
        MARK_TAB               =
      IMPORTING
        USER_RESET             =
        TABLES
          VALUE_TAB              = it_openhubs
        FIELD_TAB              = l_i_field_tab
        RETURN_TAB             = it_return
        DYNPFLD_MAPPING        = l_i_dynpfld_mapping
      EXCEPTIONS
        PARAMETER_ERROR        = 1
        NO_VALUES_FOUND        = 2
        OTHERS                 = 3
      IF SY-SUBRC <> 0.
        READ TABLE it_return INTO wa_return INDEX 1.
         IF sy-subrc EQ 0.     
    p_table = wa_return-fieldval.
         endif.
    Please help me out.
    Thanks,
    Srini.
    Edited by: Srinivasan Ganapathy on Jan 28, 2010 6:05 AM

    Hi ,
    Change your code as below:
    1. Fill the internal table it_openhubs inside the event "at selection screen on value request".
    2.  Always follow the below sequence:
        Initialisation
       At selection screen
       Start of selection.
    3. The declaration of variable v_tabname is changed from type c length 30 to type char30.
    I tried the below code , its working fine.
    DATA: V_RESPONSES(6),
          V_TEXTS LIKE ALDBOUT,
          V_PROG TYPE SY-REPID,
          V_DYNNR TYPE SY-DYNNR.
    DATA: begin of it_openhubs occurs 0,
          v_tabname type char30,  " length 30,
          end of it_openhubs.
    DATA:
           it_return type STANDARD TABLE OF DDSHRETVAL,
           wa_return like line of it_return,
          l_i_field_tab TYPE STANDARD TABLE OF dfies INITIAL SIZE 0,
          l_i_dynpfld_mapping TYPE STANDARD TABLE OF dselc INITIAL SIZE 0.
    SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE title.
      parameters:P_TABLE(30) type c.  " USER-COMMAND UPD,
    SELECTION-SCREEN END OF BLOCK B0.
    INITIALIZATION.
      title = 'OH TABLE DELETION- DELETE CAREFULLY'.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_TABLE.
      V_PROG = SY-REPID.
    V_DYNNR = SY-DYNNR.
    clear  IT_OPENHUBS.
      it_openhubs-v_tabname = 'Cost and Expense'.
          append it_openhubs.
      it_openhubs-v_tabname = 'Revenue'.
      append it_openhubs.
       it_openhubs-v_tabname = 'Revenue in Hand'.
       append it_openhubs.
        it_openhubs-v_tabname = 'Summarised WBS Actual Data'.
        append it_openhubs.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'v_tabname'
          dynpprog        = v_prog
          dynpnr          = v_dynnr
          dynprofield     = 'P_TABLE'
          value_org       = 'S'
        TABLES
          value_tab       = it_openhubs
          return_tab      = it_return
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc <> 0.
        READ TABLE it_return INTO wa_return INDEX 1.
        IF sy-subrc EQ 0.
          p_table = wa_return-fieldval.
        ENDIF.
      ENDIF

  • F4 help for file path in selection screen.

    Hi there,
    I defined one parameter p_path for file path using RLGRAP-FILENAME. I have not got F4 for this. How to solve this problem, can anybody pls help.
    Regards,
    Naseer.

    Hi,
    refer to the following code:
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_pc.
    DATA: it_tab TYPE filetable,
              wf_subrc TYPE i.
    DATA: wf_pcfile LIKE rlgrap-filename.
      DATA: wf_filter TYPE string,
            wf_dir TYPE string,
            wf_title TYPE string,
            wf_ext TYPE string.
    *  if p_ml = 'X'.                  "Manula Load - PC File
      wf_title = text-012.          "Window title
      wf_ext  = '.TXT'.           "Extension of the file
      wf_filter = 'Text Files (*.TXT)|*.TXT'.         "File Type
      wf_dir = wf_pcfile.           "Directory
    *Adds a GUI-Supported Feature
      CALL METHOD cl_gui_frontend_services=>file_open_dialog
        EXPORTING
          window_title      = wf_title
          default_extension = wf_ext
          file_filter       = wf_filter
          initial_directory = wf_dir
        CHANGING
          file_table        = it_tab
          rc                = wf_subrc.
    Hope this helps.
    <REMOVED BY MODERATOR>
    Regards,
    Sipra
    Edited by: Alvaro Tejada Galindo on Jan 31, 2008 9:48 AM

  • Creating a search help for a field in selection screen

    Hi All,
    There are 3 fields in the selection screen. They are
        WERKS
        DATE
        MATNR
    Enter a value WERKS = 2465.
    When I press the drop down menu for MATNR, it should only give the material number available for 2465.
    I think, I should create a search help for it.
    Kindly help me to create a search help for the material number based on the above condition.
    Thanks in advance.

    Hi
    i am sending you a sample code where i had implemented a search help
    for my req you can understand very easyly and write for ur req
    <b>reward if usefull for ur req</b>
    TYPES : BEGIN OF ST_OBJID_SH,
             OTYPE TYPE HRP1000-OTYPE,
             OBJID TYPE HRP1000-OBJID,
            END OF ST_OBJID_SH.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
    IF S_OBJID IS NOT INITIAL.
        SELECT OTYPE OBJID FROM HRP1000
                     INTO TABLE IT_OBJID_SH
                     WHERE OTYPE = 'D'.
    IF SY-SUBRC EQ 0.
    SEARCH HELP FOR QUALIFICATION.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
                 DDIC_STRUCTURE         = ' '
            RETFIELD               =  'OBJID'
                 PVALKEY                = ' '
           DYNPPROG               = SY-REPID
           DYNPNR                 = SY-DYNNR
           DYNPROFIELD            = 'S_OBJID'
                 STEPL                  = 0
                 WINDOW_TITLE           =
                 VALUE                  = ' '
           VALUE_ORG              = 'S'
                 MULTIPLE_CHOICE        = ' '
                 DISPLAY                = ' '
                 CALLBACK_PROGRAM       = ' '
                 CALLBACK_FORM          = ' '
                 MARK_TAB               =
               IMPORTING
                 USER_RESET             =
          TABLES
            VALUE_TAB              =  IT_OBJID_SH
                 FIELD_TAB              =
                 RETURN_TAB             = RETURN_TAB
                 DYNPFLD_MAPPING        =
               EXCEPTIONS
                 PARAMETER_ERROR        = 1
                 NO_VALUES_FOUND        = 2
                 OTHERS                 = 3
        IF SY-SUBRC <> 0.
              MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDIF.

Maybe you are looking for