What is tcode for the creation of function group

What is the  transaction code to create the function group.

The function group can be created in following ways.
1.  in SE37. create the function group by using the menu path 'goto->function-groups -> create'
2.  in SE37 give a new function module name and click on create.
     It will prompt you to enter the Function group and also to enter a short text.
3. in SE80 (Object Navigator) select the Function from the dropdown list and give the Function Group name to create.
Rewards if useful.

Similar Messages

  • Tcode for the execution of function module

    Hi!
    A very simple question:
    What is the Tcode for the execution of function module? (Se38,???)
    I have to execute  the function module RRSI_INITIAL_LINE_INSERT with import parameter I_CHABASNM = 0REQUID.
    Thank you very much!
    regards
    Thom

    hi,
    You create new or edit Fm in SE37. You also put the code for that FM in SE37.
    You can call it through pattern button in SE38, where u pass the importing and exporting parameters of that Fm
    Hope this helps, Do rewad.

  • How to find out the Tcodes for the exits

    Hi All,
    how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
    Customer Exits: EXIT_RFEBBU10_001
                              EXIT_RFEKA400_001
                              EXIT_RFFOEXIT_100
    User-Exits:  USEREXIT_DELETE_DOCUMENT
                       USEREXIT_FIELD_MODIFICATION
                       USEREXIT_MOVE_FIELD_TO_VBAK
                       USEREXIT_PRICING_PREPARE_TKOMP
    BADI: CUSTOMER_ADD_DATA_CS
              HISTORICAL_VALUES
              MD_ADD_ELEMENTS
              MD_CHANGE_MRP_DATA
              MD_PIR_FLEX_CONS
              MD_PLDORD_POST
              ME_REQ_POSTED
              NOTIF_EVENT_SAVE
    Can anyone help on this <urgency factor removed>.
    Regards
    Ksihore
    Edited by: Suhas Saha on Feb 20, 2012 12:58 PM

    i have just started reading about all these-user exits ,customer exits etc.
    i have read somewhere that:call to customer exits are triggered by function modules exits.
    the structure of function modules are like this:
    EXIT_RFEBBU10_001
    MEANS
    Keyword EXIT followed by program name fllowed by three digits.
    and the call is like this:
    call customer function 0001.
    From above we can conclude that this customer exit must be used in program RFEBBU10.
    GOTO SE38 andenter prog name RFEBBU10.check for above function module.
    for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
    using Where used lists.
    please Tell me if i m wrong!

  • Create tcode for the ztable

    Hi all
            I want to create the Tr. code for the zTable.
    For this i followed this navigation.
         From Se11
    Given the table name
    Clicked on change
    Clicked on Utilities
    Clicked on Table maintainence Generator
    Clicked on Environment
    Then It showing Transaction code in diabled mode
    How i can enable?
    Is it possibel to create the tcode for the table or not >
    If yes, How ? Plz clarify.
    Message was edited by: Prashanth Konda

    Hi Prashanth,
    If your purpose is to provide a T-code for entering values directly in to table without going to SE11 , create entries like that. Then What Sravathi suggested is the right approach . This is the standard approach to provide table maintenanance to the users who require it like Functional people and end users .
    1.T-code SE93
    2. Give the Tcode according your naming conventions.
    3.choose Create then it will ask for the description
    in the lower of the screen you can see 4 options select the last one .
    4.In the Transaction Input box give SM30 and make a check mark in the below check box , skip intial screen.
    5.In the end of the screen you can find subscreen lablled Default value
    select VIEWNAME in the column NAME OF SCREEN FIELD and in the next column type your Z-TABLE.
    If your requirement is to provide this T-CODE for inserting/modifying values then Type UPDATE in NAME OF SCREEN FIELD Column and the next column 'X'.
    If your requirement is to just show the table then you can select SHOW .
    <i>Hope This Info Helps YOU.</i>
    Regards,
    Raghav

  • What is Tcode for purchase order and purchse requisition.

    HI all
    What is Tcode for purchase order and purchse requisition.
    Thanks

    Hi Melanie,
    How are you trying to check for the PR number? Are you accessing it via Portal (IE) or the GUI?
    If you are trying to get the PR number for a SC through Portal. Then please follow the below process.
    Go to the SC > Related Documents tab
    The related Documents tab should have all the follow-on document number along with the type of document.
    If you are trying to get the PR number for a SC through GUI, then:
    Go to transaction BBP_PD in GUI > Give the Object Types as BUS2121 and the Object ID as the SC number and click on F8.
    Once you have opened the SC then scroll down till you get the Header Links and click on the line.
    This should display the document that is linked to the SC.
    Hope this helps.
    Regards

  • What is Tcode for display standard order.

    HI all,
    What is Tcode for display standard order.
    thanks

    hi,
    VA03 is the T-code for display of standard sales order.
      ME23n is the T-code for display of purchase order.
    Regards,
    Veeresh

  • No authorization for the creation of resource WG10 00_1000_001

    Dear All,
    While checking SMQ1(Outbound queue), we found 2 displayed , pls check below details.
                   Queue Informationen
    Number of Entries Displayed:                11
    Number of Queues Displayed:                  2
      Cl. Queue Name               Destination                      Entries
      100 CFLDZ31CLNT100_0034      E06CLNT100                               4
      100 MCEX03                   NONE                                     7
    While Double clicking queue (CFLDZ31CLNT100_0034), Its shows Status SYSFAIL .
    Please check details log.
    Cl. Queue Name               Destination                      Entries    Status   Date 1     Time 1   NxtDate    NxtTim   Wait for queue
    100 CFLDZ31CLNT100_0034      E06CLNT100                               4  SYSFAIL  22.09.2011 12:57:11 22.09.2011 13:16:32
    Note : E06CLNT100 (SCM System).
    While double clicking SYSFAIL Its shows No authorization for the creation of resource
    00_1000_001.
    Kindly Suggest.

    And also User not able to do activate Integration Model using Transaction CFM2 , it is giving error as below .
    System:    E06CLNT100    User:  KAPGATEG 22.09.2011 12:57:11
    Function/Q/SAPAPO/CIF_RES_INBOUND4
    Text:        No authorization for the creation of resource WG10
    Kindly advise.

  • SPRO settings for the Creation of treatment codes.

    Hi Experts,
    Let us know SPRO settings for the creation of the new treatment codes and suggest us where it can be checked once created eg. Sales order,Delivery,Invoice.
    Regards,
    harmesh

    Hi
    What is Treatment Code??
    If you mean Sales Order / Delivery / Billing Document Type then you may follow the below path in SPRO :-
    Order :- IMG> Sales and Distribution>Sales > sales Document>Sales Document header(VOV8)
    Delivery :- IMG--> Logistics Execution > Shipping>Deliveries --> Define delivery Type (0VLK)
    Billing :- IMG --> Sales & Dist. > Billing> Billing Document--> Define Billing type (VOFA)
    Regards
    Amitesh Anand

  • What to use for the events of 2 keys pressed simultaneously?

    Question:
    What to use for the events of 2 keys pressed simultaneously? As the key listener has limited functionality, in this case, I need something that can act to two events (see below)
    Goal
    1. A user presses right and up at the same time
    2. Program responds to this event changing BOTH the vertical and horizontal speeds of the player
    Problem
    I currently have a key listener to do this, using key pressed, however, it only acts to up OR right at one point in time. So the user can only increase his or her vertical speed; or horizontal speed at one point in time. Instead of increasing them both.
    Example
    Here is an example of the game: http://www.kongregate.com/games/MINDistortion/bubbles-2

    DarrylBurke wrote:
    I don't know whether there's a better way (or whether this will work as expected), but I would try setting a boolean flag on keyPressed and reset the flag on keyReleased, for each key of interest. To compute the x / y movements, I would check the state of all flags.
    dbI was thinking about your answer a few nights ago. And I was like, wait... it works! I thought, at first (as I replied before) that it wouldn't work, but I refract what I said. Its actually a very simple solution. And I apologize for questioning your solution previously. Thanks so much!
    P.S. I tested it out. Works like a charm.
    -Create booleans to handle each key
    -Set to true on press
    -Set to false on release
    -Check and update in separate thread accordingly

  • How to find the tcode for the include's in user exit

    Hi
    I wanted to find the tcode for the given include name in the user exit.
    Can you pls help in this regard
    Regards
    Madhan Doraikannan

    Hello Madhan,
    Usually the include in the user exit is part of a function group which directly may not fetch u tcode. So the best option is..
    1. Get the FM name and check the table modsap. This will give u the enhancement name and related information which can help u with the tcode.
    2. to use the where used option which will lead you though multiple program till u reach the main program where u can search for transaction.
    e.g say u r trying to search include ZXM06U41  which exists in the FM EXIT_SAPMM06E_016. Now if u do a where used for this FM it will show program name MM06EF0C_CUSTSCR1_ITEM_SET_D03 if u again go for where used it will show u MM06EF0C. now if u click of the Display object list in the toolbar u will get the list of tcodes also.

  • Two outputs for the same partner functions............

    Hello,
    I have come across the situation where i need to use two transmission medium for the same partner function, is it possible through the standard settings?
    E.x. My client wants to send  email and print to the sold to party while confirming order, what are the required settings need to be made?
    Thank you.

    Similar question was answered in the past, check the link Output transmission medium to print and email and the answer provided by Yadav suits your requirement.
    Regards,

  • What is new for the Lumia 620 in the black update

    What is new for the Lumia 620 in the black update ?

    It seems Lumia 620 doesn't benefit the "double tap to wake", other than that all announced apps and features will be available. I advise to check also some great beta apps from Nokia Beta Labs, kudos to the guys developing these.

  • In a future version of ibook author would be very useful to provide for the creation of shared content online. Teachers can collaborate on the creation of a text. Very useful for teachers to collaborate in the network. sharing sharing sharing

    in a future version of ibook author would be very useful to provide for the creation of shared content online.
    Teachers can collaborate on the creation of a text. Very useful for teachers to collaborate in the network. sharing sharing sharing

    As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc. 
    http://www.apple.com/feedback/ibooks-author.html

  • Request for the creation of a new Unemployment account for tax

    Hi Guys,
    This is a question with regard to US tax. We have received a request for the creation of a new Unemployment account for the payment of taxes. This is because the account assignment number has changed for a particular company code in Tennassee state. Please let me know where this change could be made in SAP.
    Thanks,
    Subbaiah

    Subbaiah,
    Table T5UTL is used for New Tax Company Codes. If this is a new legal entity, youu2019ll need to set up the Tax Company here. Youu2019ll also need to assign at least one Personnel Area to this new Tax Company. This must be established in order to update the next table shown below, but only if itu2019s a new legal entity. The user will know.
    Table T5UTH is for establishing the account number to be used in BSI. It must be established in order to update the next table shown below.
    Table T5UTI is for assigning account numbers by Tax Company Code. Youu2019ll need one for Tax Authority TN, Tax Type 10. The user will need to supply this information to you.
    Table BTXRATE will need to be updated with the Tax Company Code, year, and the State Unemployment Insurance rate & taxable wage amount.
    Once this is done, youu2019ll need to update BSI.
    If Tennessee is a new state, youu2019ll have work to do with the tax models.
    Regards,
    Howard

  • Kindly let me know the Tcodes for the forms below in MM

    Hi Guru,
    Kindly let me know the Tcodes for the forms below in MM
    Form - Deviation Request form       
    Form - Spot PO (direct, indirect, subcontracting)
    Form - Purchase Scheduling Agreement (direct, indirect, subcontracting)
    Form - Contract (direct, indirect, subcontracting)
    Form - Delivery Schedule (Long + Short term)
    Form - Vendor Non-Conformance
    Thanks
    Siva

    Hi,
    You can get all the forms & output devices in the Transaction code.NACE.
    you can check forms,program, for other modules also.
    Regards
    Ravi shankar.

Maybe you are looking for

  • Macbook Pro 2012 Kernel Panic

    During graphic intensive applications(gaming, netflix, etc), my macbook pro will randomly hard freeze(sometimes it's after a few minutes and other times several hours). I can't access any other applications during this, and I can't force quit using t

  • Syncing calendar and contacts from windows phone 8...

    How do I set up my windows phone to sync calendar and contacts with BT mail Thanks

  • Download Error (480) when trying to download rented movie

    Hello all. Managed to install the update. Everything seems to be working fine. Then decided to rent a movie, accepted the payment etc. but when I try to download I keep getting "Download Error (480)" and a notification to go to "Check Downloads" and

  • Having an issue with textures.

    Hello! I have been having an issue with textures. and before I upgrade to 6, I thought I had better address this.. sorry to say still in PS3.. anyway, I have an action set called Quickmats and they have been working great in my wkflow for years.  One

  • 2006 Mac Book Pro 17" dead keyboard trackpad

    I was really unhappy that my barely used MBP 17" keyboard and track pad died last week, had no doubt Apple would say new logic board for $1200. Or some expensive, half the cost of the machine repair after so little use. Instead the Genius in Pasadena