What is that gray square in Keynote thumbnails?

The new Keynote 6 has blue triangles in the lower right to indicate the slide has a transition
It has 3 little bullets in the lower left to indicate is has a build
But what is that gray square in the upper right corner? I see it on half my slides and I can't get it to show up or go away. I've tried adding various things to a blank slide and can't get it to show up.
I'm sure it's something simple but this is a classic example where a tooltip would save the day....

Figured it out. The gray square indicates the slide has presenter notes.
Boy, that wasn't easy....

Similar Messages

What is that square on A665-S6092

I have a question. I have a satellite A665-S6092 and I don't know what is that little square that is on the left from the front card reader. It is black and flat, it is not a port, and it seems like if it were a sensor or something like that. Can you tell me what is that?

I have an A665 model and it's there too. Suspect it's an IRda port for models suitably equipped. The bezel is there probably with and without the option.

What is the square on the thumbnail?

Could anyone tell me what the square on the thumbnail is? When I double click on the thumbnail it takes me to the color picker and allows me to change the color of the layer. Just trying to figure out what it is and how it works

Hi,
As Trevor says, that's the icon for a shape layer. You can find more info here:
http://helpx.adobe.com/photoshop/using/drawing-shapes.html
Edit shapes
A shape is a fill layer linked to a vector mask. You can easily change the fill to a different color, a gradient, or a pattern by editing the shape’s fill layer. You can also edit the shape’s vector mask to modify the shape outline, and apply a style to the layer.
To change the color of a shape, double-click the shape layer’s thumbnail in the Layers panel, and choose a different color using the Color Picker.
regards,
steve

Problem with Preview and PSD files - random gray square

Hi guys, hope you can help...
I've got a problem with Preview and PSD files.
If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
I've tried the same psd on my older iMac with leopard...and got no problem at all.
I suspect it got something to do with my Ati...
(this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
Thanks for your help.
DAve.

maybe I'm onto something...
I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
It seems like the i7 is much faster than the Ati....
Any more realistic ideas?

When I click on pic, gray square comes up with an exclamation point

My friend got on my computer and uploaded pics from my camera. I don't know what she did, but the pic I want is in the library as a thumbnail, so it looks like its there. But when i click it to edit it or make it larger, instead of the pics coming up, a gray square comes up with an exclamation point inside a dotted like sqare. What's going on?

Ava
Welcome to the Apple Discussions.
The ! or ? turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents. The most common cause of this is User Activity in the iPhoto Library Folder. Have you altered, moved or renamed anything in the iPhoto Library Folder?
If you haven't, then try rebuilding the database. Hold down the apple and option keys and launch iPhoto. Use the resulting dialogue to rebuild.
Regards
TD

Dv gray squares blank screen Kona LH final cut pro iTunes

KONA/AJA conflict with FCP
If anyone outputs their system's sound through a KONA LH card and AJA KL breakout box, it causes gray squares and then the video output goes fully blank when outputing via FireWire / DV to a deck.
I noticed that this problem only occurs when I run iTunes at the same time as FCP. If I change the system sound to the internal speakers (and not the KONA/AJA card), the problem disappears.
I know this is a third party product, but if there are any suggestions to prevent this, it would be appreciated (other than not doing what I am doing--of course . . .
--Stephen
Dual 2.7 G5 Mac OS X (10.4.3) Kona LH, SATA array, DSR-11

for the don't do what you are doing response
x

Gray square box

I realize this is a bit off topic, but i was wondering if anyone you have had this issue. I was working in FCP the other day and I guess I was trying to do just too much at once and my g5 froze and the only way to power it down was to pull the plug. Holding in the power button didn't work. Now when I boot up, the computer shows the apple logo for about 1/2 second then a gray square box. The gray square stays on the screen until I reach my desktop. Computer boots to the desktop fine and i am able to use all apps. Does anyone know what this gray box is and if I should be concerned? i have posted an example here: www.suerothberg.com/IMG_3419.JPG
much thanks.

Onyx is basically the same as running fsck in a nice little app.
Do you have your project files on your system disc? (I do) that's what I would worry about backing up -- desktop setting are easy to redo -- it's the stuff that would take hours/days/weeks to re-do that you want to back up.
Home folder would backup everything (desktop, documents, music, settings etc) but could be fairly large.

Intra-Discussions URLs = intermittently awry? ("little gray squares")

Hi, Friends!
This may be a very naïve question — or it may have been answered 10x over. I've had no success finding a solution after searching herein, so I'm asking for help...
Intermittently, "intra-Discussions links" — "text URLs" I've written as links to other posts — just don't work. Other times, the same formatting works fine. I haven't been able to predict, and QA/QC gets tiresome.
Can someone help me understand? Is it simply a vestige of transition, or server hiccups, or my lack of savvy, or... ? I'm still learning html, so perhaps the use of both/either XYXYXYX&#XYXYXYX and XYXYXYX#XYXYXYX in post identifiers — seemingly interchangeably — is what has me confused...?
I'm having trouble describing this succinctly. Please bear with me...
Trying to explain:
(1) Method One. I prefer this approach for linking to a post that I think is apropos:
I access the URL for a given post (often not the original post in the thread). One way to do this — kindly authored by ali brown — involves editing a "Reply" link to the post you want to reference. I usually use a simple search, requiring that bit of time, but avoiding any errors that might arise from editing. Either way, the resulting format looks like this:
<a href="http://discussions.apple.com/message.jspa?messageID=1902768#1902768"> Bluetooth
Troubleshooting Checklist</a>" or " 1902768&#1902768<font color="000000" "
Externally, this link works fine — and it usually does internally, too. (It works now, too — <i>after</i> I edited it until my eyes crossed.)
<font color="000066">But sometimes, that method goes wacky. I'll have trouble posting an edited post, or discover that the link is dysfunctional while I'm checking through a post for accuracy. Going back to the Editor, I'll discover that — in these cases — the second post ID (in the above case, the 1902768 after the #) has been replaced by two solid gray squares. No amount of retrying, retyping, pasting-in to be sure of accuracy, etc. fixes the problem. The only alternative I've come up with is to manually delete the squares — ending up with a link to the original post of the thread.
But that doesn't accomplish what was intended, because then a reader has to scan the entire thread to locate the specific post. When that happens, I substitute...
(1) Method Two. When I "have to live with" this snafu, I'll go back to a format modeled after the "old" Discussions. For this example, this would be:
<a href="http://discussions.apple.com/message.jspa?messageID=1902768"> [ "Bluetooth
Troubleshooting Checklist," Dean Pahl, Mar 11, 2006 10:33 pm ]</a>
Any ideas?
Thanks!
Dean
Edit: Egad! The problem happened again as I was editing and correcting this post! (Even though it'd been working fairly well lately...) In fact, it resulted in cutting off 1/2 of the post untll I went back and edited — a few times, as it turned out...

Thanks grandly, Niel!
So, to confirm my understanding — simply editing out the ampersand (if it appears in the string) will resolve the difficulty?
If I may, a few follow-up questions...
(a) I'd thought this more "random"... tried testing by entering a URL into Safari's address box both including the "&#" and then deleting the "&." Both worked. Perhaps something in the Discussions' software intermittently conflicted with this — or perhaps consistently, and my observatioins were imperfect? I'm pretty familiar with the use of html "character entities" — is that equivalent terminology to what you've called "declaring a Unicode glyph?"
(b) An example for clarity —> Let's say I jump to the Using Apple Discussions »» Feedback About Discussions main page, and search for < Niel "Re: Intra-Discussions URLs = intermittently awry? ("little gray squares")" >. Then, following the link back to your post above, I can copy its URL and paste it into an html link within another message. Unfortunately, what's returned ends with "jspa?messageID=1950955&#1950955" — i.e., the character string that may be misinterpreted and cause the misbehavior.
I'm going to test this out now, using both formats...
Edited to add: Interesting... Both formats worked fine to link back to your post — from within this message and from the same link in a TextEdit file. However, when I returned to the Discussions' Editor, the entire string following the first "1950955" morphed into two gray squares. I suppose these are squares just like what happens with an improper key "mapping" — returning to the mis-identification of an html character entity. It may be that what I'd perceived as "random" was related to whether I used the Editor. So it seems I've proved your assertion in full, and found a correlation about how.
Was the "?" part of the string added because it was derived from a search?
My curiosity essentially stems from wanting to simplify posting and learn more about how & why. Perhaps you could recommend a reference that might help? Before posting originally, I checked a few tutorials such as W3 Schools' — but couldn't find what you've so cogently explained...
Thanks again!
Dean

What does a gray icon with grid lines mean? It looks like a bullseye.

What does a gray icon with grid lines mean? It looks like a bullseye.

It's an app icon that didn't load properly .... If it looks like this.

Print illustrations on white background; eliminate gray square/rectangle behind images

working on desktop publishing project that will be printed in black white only. Have photoshop images that will be used as illustrations. when I put these images into InDesign and print them, a gray square/rectangle appears behind the image. I cannot eliminate the gray background. it is essential to the project that the images print directly on paper without the background gray. have tried several youtube video lessons but none has been completely successful yet.

I don't quite understand..........I'm using iwork pages, I click on shapes (square), I fill square with pink, I click on media (clips are stored there), picture of butterfly is than place within the pink square. However I would like it so that the picture of the butterfly layout only with the pink background. I don't want the white background. Am I missing something, or I'm just not being clear? Thanks for any further assistants.

Error : 'no cached images'. What does that mean ?

I try to import some images in Rapidweaver. But in the previewmode I get this errormessage :
Error exporting image thumbnail for 'name photoalbum' (no cached image) What does that means ?

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

Neo2: What is the gray noisy tunning ventilator on the mb ?

Hey users,
- What is the gray noisy tunning ventilator on the mb* ? -
Alright, I have already described it and identified as a ventilator & tunning thing but what is it for ?
Is it a cooling ventilator for a Chip-set ? Which chip-set ?
My goal in asking these informations is I would like to change it with a less noisy ventilator without tunning.
What is the specification of this gray box ? What will I have to ask as ventilator to replace this one ?
Picture of the motherboard with the noisy tunning ventilator
Otherwise, the MB is rather good ! ( neo2 Fis2-R )
The bios is not updated and I have done none overclocking.
It works well. I regret this damn ventilator, which I thought useless.
It seems it is not so I am checking if I could change it. -
My rate 8/10 for MSi Motherboard Neo2 Fis2-R.
Sincerely,
ElManu.
* mb: motherboard

Hey Everybody,
Hey Maesus,
(main worry)
so you are saying that I could unplug the NBFAN1 ( GND, 12V, Sensor ) which
is a fan power connector ?
Wouldn't it be dangereous to do that for the Chip-set which won't be cooled anymore ? If there is no more power, there is no more cooling, isn't it ?
(main question)
Finally, would it be possible to change it to a fan which support the sensor ?
Which brand do you advice me if so ?
Thank you for your answers !
Sincerely,
ElManu.
PS: I remind that I would like to change it because it is too noisy and my goal is to check how important it is and what are the specification of this in the way to be able to change it.
It is a cooling lights ventilator which is set on the Chip-set NorthBridge.
That is what I know now.

What is the gray horizontal line under the times in the timeline?

What is the gray horizontal line right under the times across the top of the timeline? It has a little orange beginning and ending tab.

That is the Work Area Bar.
Unfortunately the search option in the Help is broken (again).
Most people (I think) have turned it off.
But for instance you can drag the bar over an area you want to preview.

What is that symbol in front of the Podcast listing

In iTunes our podcast Midwest Movie Review has a funky delete like symbol with an X on it... see it????
podcasts >movies and television >(weird symbol) Midwest Movie Review
What does that mean? Is there a key to goofy symbols and updates for podcasters? Is this the place?
How does one remove this mark?
-Rob

Interesting... my podcast has this strange symbol too (just a square, no X though), since I included the feed on ITMS on August 2005.
I double-checked my xml file now (that I edit by hand) and I simply could not find anything odd (not even a space).
You can check the symbol on:
podcasts --> International --> Brazilian --> Marcos Lacerda - Podcast de Variedades
And the interesting thing is that it keeps correctly sorted by alphabetical order despite the symbol (it would be great if this could bring mine to the top of the list) :-D

Fluid Grid Layout- HTML5 video buttons become gray squares Android

I am attempting to use Fluid Grid layouts for a simple smartphone/tablet acessible video page. I am in Dreamweaver CS6 Cloud (updated). The buttons for play and full screen mode are shown as gray squares on my Android phone. It works fine in other browsers (OS:Windows 7, Chrome, FireFox and IE. I have not tested iOS or iPhones). I spent a day trying variations trying to get it to work properly on the Android and finally built a whole new HTML5 (non Fluid Grid) and it works. But that has issues with formatting, where comes in small and has text not filling the page for Android. I am trying to avoid people having to zoom in and out to see the page. The Fluid Grid brings the page in the way that I want it. My guess is that the Fluid Grid boilerplate or the respond.min.js is causing the conflict. As this is a touchy new venture into Adaptive Design I have left these files alone.
Here is the fluid grid (stripped of formatting) http://www.oha-edu.org/Video/v1.html
Here is the HTML5 video page where the buttons show up. http://www.oha-edu.org/Video/2.html
Dumping my Droid Razr Maxx (Android Version 4.04, System version 6.16.211.xt912.Verizon.en.US) is not a solution. I wish to make this work for as many devices as possible.

What is that gray square in Keynote thumbnails?

Similar Messages

Maybe you are looking for