What is that loud, grinding sound?

Had my computer, MacBook, on all day.  Connected to power all day too.  Later, about early evening, the house was a little warmer and I tried to put MacBook to sleep when a very loud, almost grinding sound was coming from the laptop.  It almost seemed like the sound was coming from the battery compartment but not sure.  It was not a drive sound, nor fan sound, or CD drive sound, nothing like that- much louder and nasty sounding.  So has this happened to anyone else and does anyone know what this could be?  All help appreciated and welcomed.  Thanks

This could be the internal Hard Drive being a bit loud when it starts up or it could indicate a potential hard drive error.
If you check the S.M.A.R.T status of your drive in Disk Utility it should give some indication (but not always).
If the system works fine it's probably nothing to worry about, but you should probably speak to Apple Tech Support or make an appointment with an Apple Genius at your local Apple Retail Store just to be on the safe side.
If you have an external drive available to you, make a back up of your system (so you don't loose anything) in case the drive does need replaced.

Similar Messages

  • What is that loud 'tok, tok, tok "sound in my iMac?

    What is that loud 'tok, tok, tok "sound in my imac? It will sound when the computer boots, and sometimes when the machine is turned on. Should be sent directly for warranty service?

    This could be the internal Hard Drive being a bit loud when it starts up or it could indicate a potential hard drive error.
    If you check the S.M.A.R.T status of your drive in Disk Utility it should give some indication (but not always).
    If the system works fine it's probably nothing to worry about, but you should probably speak to Apple Tech Support or make an appointment with an Apple Genius at your local Apple Retail Store just to be on the safe side.
    If you have an external drive available to you, make a back up of your system (so you don't loose anything) in case the drive does need replaced.

  • What causes that nasty clicking sound from a Logic VI?

    You know the kind I mean? Especially in the ES1 or ES2. It's right at the key on. Adjusting the attack doesn't work because then you lose the punch. Is it an LFO out of whack. I really need to learn how to use the routers in those but such a pain in the a**.

    Assuming you are not talking about low audio buffer performance glitching, a small click when (and only when) the amp env attack time is zero, is normal, because these envelopes are impossibly fast - way faster than a hardware synths envelopes in general.
    It's equivalent to the waveform jump from zero to 1 in one sample - it will sound like a click, because that's what it is.
    Just increase the attack time a tiny amount, and you'll still have a superfast attack, but not fast enough for the audio to click.

  • What is that drum roll sound that comes out of nowhere?

    I cannot figure out where this irritating drum roll flourish sound is coming from on my iPad air?
    It happens for no reason... even when the iPad is turned off.  It sounds like a snare drum hitting about 4 rolls with a cymbal.  VERY irritating.
    I've checked through all the settings.  I used to get alerts from the BBC news app - but that's not showing up on the settings.
    Any idea where to check for this?
    Thanks...

    I can't find it a drum roll in sounds either. If you can't find it in notification center it may not be a alert but a noise that shouldn't be there. First double click the home button and swipe all the apps up to close to make sure the noise isn't coming from there. Next comes a reset. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own. Next comes reset all settings.

  • My HP c4795 just started making a loud grinding sound when the paper begins to feed???

    Hello, The noise then stops and the printing continues successfully.  I have had the printer about one year and it has performed perfectly until Apr 25.  What might be the issue and what can i Do?
    Thanks.
    Jamie

    Hi,
    The product's rollers and gears make noise when they pick up paper. Thicker media makes more noise. If the product prints without a paper jam, the noises are normal. If the product jams, clear the paper jam.
    Recommend you to try clean the rollers and try the media type and check if same is repeated.
    Regards,
    Akki
    I work for HP but my posts and replies are my own.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • There is a loud knocking sound underneath the my key board what is that noise?, there is a loud knocking sound underneath the my key board what is that noise?

    THERE SEEMS TO BE A LOUD KNOCKING SOUND UNDER NEATH MY KEYBOARD SOUNDS LIKE SOMETHING IS CLICKING AGAINST SOMETHING ELSE HELP ME PLEASE

    Before you send it for repair, try different RAM chips or HDD in it, if you have any sitting around.
    I've had heat issues on my Dell @ work whose RAM stick went bad and new stick fixed it.
    In any case, Apple technicians @ the store are helpful and they run diagnostics (for cheap) before doing any repairs, so you may have them do the diagnostics and repair it yourself afterwards, if it truns out to be just a bad RAM or HDD.
    I hope you get out of it cheap.

  • Nokia lumia 1520 loud speaker grinding sound and w...

    hi,
    my nokia lumia 1520 has been making sound grinding sounds which can only be heard if you put your ear close to the loud speaker. i emailed the company that i bought the phone from and this is what they said:
    "for this type of issue, you can do a Master Reset on your phone (please take note that by doing this all of your data will be erased). If the problem persists, kindly go to your nearest Nokia service center to have it checked. If it's still under warranty, any repairs will be free of charge. If it's NOT under warranty, please get the code from the service center and forward it to us through [email protected] so we can review the charges (subject for approval) and give you a refund for it."
    i did as they said but when i went to the nokia care centre, since i live in uk and the phone is from dubai they said that its out of warranty so i asked them for a code as the company said to me but nokia care team had no idea what i was talking about. i showed them the email and nothing
    so i was wondering if anyone can help me out
    id really appreciate it 
    thanks

    Hi thedeepsleeper,
    Welcome to the Nokia Support Discussions! 
    Are you still having an issue with your Lumia 1520? If yes, did something happen to your phone prior to the issue? What troubleshooting steps have you tried so far? Does it happen only when you put it on a loudspeaker? How about when connecting your earphone to your phone? 
    If you would like to send it for repair and since there's no international warranty, we suggest sending it to a Nokia Care Point in Dubai instead. To know more about the difference between the warranty in the UK and in Dubai, see these links: 
    http://www.nokia.com/gb-en/support/manufacturers-limited-warranty/
    http://www.nokia.com/ae-en/support/manufacturers-limited-warranty/

  • There is a very loud, distorted sound coming from my Ipod Nano 7th generation no matter what headphones i use. Any fixes?

    I bought an Ipod Nano 7th generation and out of the box, there was a really loud distorted sound as soon as i pressed play. When i press pause, it stops. If i use a different pair of headphones is does it. So, i exchanged it, and all was good for about three weeks, now even the new one is doing it. The sound is so loud and fuzzy that i cant even hear what the song is supposed to be.

    First, ipod nano 7th gen does not have a built-in speaker. Second, a brand new nano jack is sometimes ifficult to insert, make sure it is fully inserted or flushed to the ipod body. Cheers!

  • What is that sound effect when you wake the MBP from sleep?

    There is some sound effect every time I wake the MBP up from sleep. I am not sure what is making that sound. It sound like "pffft", I hope that makes sense.

    Hi I hve the same problem mi MacBook Pro doeas that, the sound that makes is the one I have for default, Funk (for example if my computer sleeping with the screen open and I press any key on the keybord it makes that sound) if you want you can try this, to chek if that is the sound that you heare, close all the windows and try to use expose.
    remember the sound that you are going to heare is the one that you have for default.
    Another thing is that I re-instal the OS and the computer stops from doing that but then start again when I eject my iPod from the finder window but I left it conected from the USB and then when the computer was sleeping I desconected it.
    I know that maybe nothing of this can help you but I want to let you know that you are not alone.
    If you found the fix for that thing please let me know.

  • What is grinding sound on my iMAC

    I had my hard drive replaced and upgraded my desktop to snow leopard.  Since then the computer has a grinding sound coming from it.  The spinning ball of death appears frequently dispite taking actions to clear cache, etc.  Am I doomed to need to replace more of the 4 yr. old computer?

    Sounds like your new hard drive is dying. This does happen. Call the vendor from where you got it and ask for a replacement.
    Allan

  • 27 Inch iMac 2.8GHz i5 (Mid-2010) Grinding Sound.

    Hi, I got my iMac as a replacement last year and it's just started making an intermittent grinding sound. It's never when doing anything specific. I tried to make it make the sound by rendering a video, doing a disk speedtest and nothing happened which has just confused me. I'm usually pretty good with computers, building PCs and repairing them but I have no idea what is going on with my iMac.
    Stupidly and because of money problems I couldn't get Applecare so it's 8 months out of warranty.
    Has anybody had any issues like this with their iMac, if so what was it that was wrong? I've not had the best of luck with Macs and it's getting annoying that they always break on me. Thanks in advanced!
    Benjamin

    Thanks, I have regular Time Machines backups so I'm not too concerned about that. It doesn't get louder under load and I've used SMCFanControl to put the 3 fans up 1 at a time and the noise didn't increase or start which leads me to believe it possibly is the Hard Drive. I can't get into AHT for some reason, It worked before updating to Mountain Lion and now I can't even get on to it using the Snow Leopard disk.
    I think I could try taking out the Hard Drive and run the drive in an enclosure just to see if the sound will start in one. If it does, I guess that's the easiest thing to replace and might be a good idea to go to an SSD at the same time.
    I'll try to explain the sound in more detail. At random times a noise would start and within 2 or 3 seconds it gets to about the volume of the fans at max, when at the peak volume the sound is like an angle grinder grinding metal then it just fades to nothing and the iMac sounds just like normal except for a slight whine from one of my fans that is inaudible unless I put my ear to the machine.
    I hope that was enough detail, it's somewhat hard to describe.
    Thanks again!

  • HP Laserject 1536dnf MFP Auto Feeder makes grinding sound

    When I use the auto feeder on my HP Laserjet 1536dnf MFP it makes a loud grinding or clicking sound.  It does this when I am trying to feed paper through it for copying or for scanning.  After the paper has been fed part way through the feeder it stops making the noise.  The copy or scan does work.   It doesn't seem to be causing a problem other than being very loud. 

    Hi @charlo8 ,
    I see that you are experiencing loud noise when using the ADF. I would like to help you out.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
    This ensures the printer is receiving full power and may help this situation.
    I have provided a document for cleaning the ADF rollers and separator pad. Just to make sure the noise isn't coming from there.
    'Document feeder mispick' Message Displays on the Control Panel and the ADF Does Not Pick Up Paper o...
    Disregard the title.
    You can flip up the one part on the ADF to check inside with a flashlight, to see if there is any obstructions or pieces of paper stuck inside. Flip it up where the yellow circle is marked on the picture.
    Hope this helps.
    Please call our technical support if the issue persists, at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Contact HP.
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hi i have a macbook pro 13 inch mid 2012 i noticed that the speakers are not that loud unlike before

    hi i have a macbook pro 13 inch mid 2012 i noticed that the speakers are not that loud unlike before,
    now when i play music or videos, the sound is not the same unlike before, then my brother noticed it too because he has a macbook pro 13 inch late 2011 as well, im just wondering whats the problem? the speakers on my bro's laptop is still loud, mine is becoming not that loud much unlike before, tnx!

    Check your settings in System Preferences>Sound.  If that does not help, perform a PRAM reset.
    http://support.apple.com/kb/ht1379
    If that does not solve the issue, then a trip to an Apple store is in order.
    Ciao.

  • Pavilion dv6 - loud beeping sound when starting +sound problem

    i just bought an hp pavilion dv6 notebook LR732PA and every time i turn it on there's a loud beeping sound, and i'm not sure if this is normal but it asks me where to boot from (pc hard drive) and which oS (windows 7 64-bit). does anyone know how to stop the beeping?
    Also sometimes the sound stops working altogether and an icon appears on the screen with a circle moving around it, and when i try to put the volume up the bar slides back down. it usually can be fixed by closing some programs and processes, it happens sometimes when ive just got 2 programs running and i close one and its ok, or if its not i have to restart. is this something to do with RAM or some kind of sound setting?
    Thanks =)

    There could possibly be a RAM issue here are a couple of troubleshooting links that might resolve your issue or give you an idea what the beeping is referring to.
    http://h10010.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01732674&product=1132551#N16...
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis13707 
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • HT1338 HOW CAN I SPEED UP MY MAC IT HAS A GRINDING SOUND AND THE COLOUR WHEEL SPIN AND FREEZES

    MY IMAC HAS A GRINDING SOUND AND ITS SLOW, THE WHEEL START SPIINING AND IT FREEZES I HAVE TO TURN IT OFF AND ON AGAIN , WHAT IS THE PROBLEM AND HOW CAN I SPEED IT UP AND GET IT TO RUN FASTER?

    Does the sound appear to be from the hard drive, such as when you do any work (which means the hard drive is being written to)?
    Have you received an email from Apple about their Seagate hard drive recall (for certain iMac models)? Check to see if yours is affected here:
    http://www.apple.com/support/imac-harddrive/
    In any case, a grinding noise is what I had, followed by other very strange behavior and the diagnosis was hard drive failure. So, whether you are covered or not, I would strongly suggest that you backup all your data as quickly as you can and - if you're not covered by warranty or the recall - book an appointment at your nearest Genius Bar for a diagnosis.
    Also, please do not use all caps - difficult to read and it's considering shouting on the internet.

Maybe you are looking for

  • How to Process Free Items in SD

    Hi, Our scenario is like this. We get free merchandise from our supplier. That free merchandise will be included in our inventory thus affecting the Moving Average Price of that item.We also sell the free merchandise to our customer thru SD. Now we w

  • Display conditional Image in Report Column

    Hi, I'm quite new to HTMLDB and searched the forum for the mentioned matter: I have a report with about 3 columns. In the second column(Col2) I have a values like male or female. Is it possible and if yes how to insert an image before the value in Co

  • Initializing properties for form objects

    If I want to set starting values for some form objects as soon as the form opens, what's the best event to use? I want to set a date field's value to the current date. I also want to set the Presence property of some objects to "Visible" or "Invisibl

  • Canon 6D RAW file converter

    I am a PS CS5 user and recently purchased the new Canon 6D.  I have downloaded the RAW files from my camera, but PS won't read them (Canon software will).  I was given the sugestion to convert them from RAW to DNG with the Adobe convertor so I can us

  • Incase of emergency contacts

    Hello and good morning , I am a new Iphone user , been on the Android platform for many years and i see something that appears to be lacking on the Iphone , my last two droids had an I.C.E. contact list , In case of emergency contacts , if something