What is the 1 st stage and 2 nd stage dealer?

What is the 1 st stage and 2 nd stage dealer
how to capturer Excise for borh?

HI,
process of capture excise for both is same
In J1ID for that vendor code you have to maintain his details regarding 1 st stage and 2 nd stage dealer in vendor excise details
check following link for same
[http://sapfunctional.com/MM/MRPindicator/excise.htm]
Regards
Kailas Ugale

Similar Messages

What are the appropriate document/stage dimensions in Flash for tablet optimized apps?

What are the appropriate document/stage dimensions in Flash (width x height in pixels) for tablet optimized apps?
(Dec. 2013)
Using Flash and AIR for Android/iOS I would like to develop a educational interactive title optimized for tablet PCs, hopefully both the Android but finally also the iOS platforms. With so many tablets on the market today and with different resolutions (and even aspect ratios) I have difficulty deciding what document/stage size to set for my project/app. I have been experimenting with an Android Google Nexus 7 and Samsung Note 10 tablets and discovered that Android automatically resizes the app's stage to fully fit the screen of the tablet BUT this creates the following two issues for me:
if the stage/document size in Flash is too small and I include bitmaps when the app's stage is enlarged to fit the tablet screen the bitmaps look pixelated.
If I make the stage dimensions too big so that there is no bitmap pixelation because the bitmaps will be shrank instead of enlarged, I am afraid that on some older tablets with slower processors the app may be too slow to run (but I have to say that I did not experiment with very large stage dimensions yet).
Until today I had looked at some of the most commonly used tablets on the market and their resolutions Google Nexus 7, Samsung Note, iPads etc and was inclined towards using a stage size of approximately 1280 x 720 pixels which I considered a medium solution, but now the new generation tablets came out (Nexus 7 gen 2, iPad Mini with Retina, iPad AIR etc) with much higher resolutions so I don't know what size to use now. Anybody has any suggestions?
I would appreciate any ideas and suggestions on this matter.

You explained your problem well enough that looking at the picture won't matter. It looks like you found out too late that one of the first things you should do when you create a Flash file is set the movie properties, which include the dimensions and other things like background color, frame rate, publish settings, etc. While the string that I just listed can pretty much be revised anytime, the dimensions should really be done before anything else, when possible.
One way to go about resizing is to leave the file as is and specify the larger dimensions in the html page code. This could end up reducing the quality of any bitmaps you might have in the file(s) since you would essentially be enlarging them, but any Flash drawn elements will resize cleanly.
If you resize the stage, then you don't have much choice but to resize and relocate everything in it keyframe by keyframe.

What is the diffrence betweensy-tabix and sy-index

hi
can any one suggest me
what is the diffrence betweensy-tabix and sy-index
Thanks & Regards
kalyan.

Hi Kalyan,
This question has been answered many times on SCN. Please make a search before posting a thread.
Read the Rules of Engagement.
Happy Posting.
Regards,
Chandra Sekhar

What is the diffrence between cookies and cache, is it safe to remove cache?

what is the difference between cookies and cache , is it safe to remove cache ? . I had cleaned cookies many times but I have not removed cache , does it goes on increasing day by day ? please let me know

Cookies are small files that contain information useful to a web site -- such as password, preferences, last date visited, etc. You may remove the cookies that you don't want adn since some of them are a privacy issue, many people remove them all.
Cache is just a collection of data downloaded to help display a web page. After you leave a site, much of the cache is left on your computer and is no longer needed. You can always remove the cache because it will be replaced as needed.

What is the diffrence between BAPI and RFC and business object

Hi Experts,
Can anybody tel me what is the diffrence between RFC and BAPI , and also what is ther relation with business object?
Thanx in advance.
Nilesh Hiwale

Hi,
BAPI's are associated with Business Objects and also they are RFC enabled.
But RFC's are the FM's which can be called from external systems, those FM's can be used in many places based on the applications..
Check these Links
whats the difference between BAPI and RFC??
Diff. Between BAPI and RFC
Regards
Kiran

What is the diffrence between PGA and UGA?

Hi All
Just one question
"What is the diffrence between PGA and UGA?"
Thanks

PGA Memory
The Program Global Area (PGA) is a memory region that contains data and control information for a single process (server or background). The PGA is made up of the following:
Stack Space
A PGA always contains a stack space, which is memory allocated to hold a session's variables, arrays, and other information.
Session Information - (UGA)
A PGA in an instance running without the multi-threaded server (named Shared Server in Oracle9i) requires additional memory for the user's session, such as private SQL areas and other information. If the instance is running the multi-threaded server, this extra memory is not in the PGA, but is instead allocated in the SGA (the Shared Pool).
Shared SQL Areas
Shared SQL areas are always in shared memory areas of the SGA (not the PGA), with or without the multi-threaded server.
Non-shared and Writable
The PGA is a non-shared memory area to which a process can write. One PGA is allocated for each server process; the PGA is exclusive to a server process and is read and written only by Oracle code acting on behalf of that process.
UGA Memory
The UGA, or User Global Area, is allocated in the PGA for each session connected to Oracle in a dedicated server environment. The PGA is memory allocated at the client to hold a stack which contains all of the session's variables, etc. In a Shared Server environment, Oracle allocates this memory in the Shapred Pool (the shared pool is contained in the SGA), for all sessions. This helps to reduce the PGA (client) memory footprint of Oracle, but will increase the SGA (shared pool) requirements.

What is the diffrence between pallet and quant

Dear friends,
what is the diffrence between pallet and quant

Hi,
Pallet is the material storage device & quant is the stock of the material in a storage bin.
I will request you if you are new comer to WM please refer any online WM guide for various terminology.
Regards,
PRashant

What is the diffrence between ASCII and BIN mode

Hello All,
What is the diffrence between ASCII and BIN mode
Regards,
Lisa.

'ASC' :
ASCII format. The table is transferred as text. The conversion exits are
carried out. The output format additionally depends on the parameters
CODEPAGE, TRUNC_TRAILING_BLANKS, and TRUNC_TRAILING_BLANKS_EOL.
'IBM' :
ASCII format with IBM codepage conversion (DOS). This format correspond
to the 'ASC' format when using target codepage 1103. This codepage is
often used for data exchange by disc.
'DAT' :
Column-by-column transfer. With this format, the data is transferred as
with ASC text. However, no conversion exists are carried out and the
columns are separated by tab characters. This format creates files that
can be uploaded again with gui_upload or ws_upload.
'DBF' :
The data is downloaded in dBase format. Because in this format the file
types of the individual columns are included, import problems, for
example, into Microsoft Excel can be avoided, especially when
interpreting numeric values.
'WK1' :
The data is downloaded in Lotus 1-2-3 format.
'BIN' :
Binary format. The data is transferred in binary format. There is no
formatting and no codepage conversion. The data is interpreted row by
row and not formatted in columns. Specify the length of the data in
parameter BIN_FILESIZE. The table should consist of a column of type X,
because especially in Unicode systems the conversion of structured data
into binary data leads to errors.

What is the diffrence between LIS and LO Cockpi

Hello All,
What is the diffrence between LIS and LO **** pit.
Regards,
Lisa

Hi Lisa,
take a look to my weblog to have more info...
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Hope it helps!
Bye,
Roberto

What is the diffrence between extends and creating new object?

HI ALL,
what is the diffrence between extends and creating new object?
meaning
class base{
class derived extends base{
class base{
class derived {
derived(){
base var = new base();
can u people tell me diffence from the above examples.
THANKS.
ANANDA

When you create a new object you have to supply the class to which that
object belongs. A class can extend from another class. If it does so
explicitly you can define the 'parent' class from which the class extends.
If you don't explicitly mention anything, the class will implicitly extend
from the absolute base class named 'Object'.
Your example is a bit convoluted: when you create a Derived object,
its constructor creates another object, i.e. an object from the class from
which the Derived class extends.
Extending from a class and creating an object don't have much in common.
kind regards,
Jos

What is the diffrence between multicasting and broadcasting?

hi friends
What is the diffrence between multicasting and broadcasting?
i'm bit confused in multicasting and broadcasting.

Broadcasts go everywhere within a range determined by the sender.
Broadcasting is deprecated and unliikely to go beyond the nearest router.
Multicasts go everywhere where receivers have declared they are present.
Multicast can be implemented beyond routers in a WAN which you control but ISP routers generally don't support it.

What is the diffrence btween IDOC and BDOC?

what is the diffrence btween IDOC and BDOC?

Hi,
In short Idoc is an Intermediate Document and Bdoc is an Business Document.
Data can Be Transferd from Sap to Non Sap using Idoc where as we can transfer
data between sap to sap in Bdoc.
IDoc
IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions
BDOC
BDoc is a business document which is technically similar to an IDoc. BDocs are used to communicate data between two systems.
BDocs come in two types. One is the message BDoc (MBDoc) and the second is the Synchronizing BDoc (SBDoc).
MBDoc is used for replicating the data between SAP CRM and SAP R/3
SBDoc is used for replication and realignment between SAP CRM and mobile clients
som times SAP will be integrated with som other third party systems
ex SAP with BAAN here we should comunicate one to other systems
here we can integrate using EDI technology in this the formate of data will be in I DOCS EX :EDI is a bridge between 2 systems .I doc is a container to transfer data from one sys to other
this Idocs we can use in ALE technology also
BDoc is called Business Document,
BDoc represents data in a structural format. This sturctural architecture is use to either input data to system or send data to other system.
BDocs are data carrier that can either collected in system(Inbound) or can be send out of system(Outbound)
Please refer following link:
http://help.sap.com/saphelp_crm40sr1/helpdata/en/ec/8d7e3a7e760b55e10000000a114084/content.htm
Thanks,
Medha.

What is the diffrence between map and map.entry in core java

what is the diffrence between map and map.entry in core java . where it will be use ful. any one give one example plz.

A Map contains Map.Entry's
e.g.
        Map map = new LinkedHashMap(8);
        map.put(new Integer(1), "one");
        map.put(new Integer(2), "two");
        final Iterator iterator = map.entrySet().iterator();
        while (iterator.hasNext()) {
            Map.Entry entry = (Map.Entry) iterator.next();
            System.out.println("key=" + entry.getKey() + ", value=" + entry.getValue());
        }

What is the diffrence between OCI and OCCI?

What is the diffrence between OCI and OCCI?

Will Lee wrote:
What is the diffrence between OCI and OCCI?Beside the other answers, there are a few additional points to consider:
1) OCI is the "gold" standard API. New stuff is always available in OCI first, and only later trickles down to other APIs, like OCCI.
2) OCI is a low-level API, harder to get started with, than OCCI. APIs in OCI are often "untyped", taking a void*, which opens the door for errors.
3) In OCCI you set values, while in OCI you bind them. So OCCI takes a copy of your values, while OCI takes an address at which to later read the value. This opens the door to subtle bugs where you pass the address of a temporary in OCI, which later crashes in some mysterious ways. So OCCI is way safer in this regard.
4) OCI is C code, which is very portable. Because OCCI is C++ code, and on Windows you can't easily mix and match libraries compiled with different versions of Visual C++ (VC6, 7, 8, 9), you have to wait for Oracle to make a new build with the latest MS compiler. Just see the number of questions on this OCI forum and the OCCI one.
5) OCI is used internally by Oracle to write many of their own tools, it's the lingua franca between the Core DB group and the other groups. Since they use it themselves, it's much more stable that OCCI, which is mostly only used by outside customers.
6) The way SQL objects are dealt with in OCI and OCCI is fundamentally different, to the point where you can't mix and match OCCI and OCI object calls.
#1 above is one reason we had to abandon using OCCI, lacked support for the new in 11g BinaryXML, but that's just one example.
IMHO OCI is the way to go, if you want the latest and greatest. Yes, it's more difficult to code against, so the learning curve is steeper, but once you've reached critical mass it's just fine. If you write code in C++ as opposed to C, you can easily make it a lot safer with a thin C++ layer on top which, unlike OCCI, still allows you access any OCI raw handle to do stuff the wrappers don't expose. My $0.02 ;-) --DD

What is the diffrence between LLA and LZA of macbooc.imean quality?!

what is the diffrence between LLA and LZA part numbers of macbooc.i mean quality?! i want to buy ME865LZA .is that ok?

Those letters simply indicate the region where the MacBook will be sold.
LL = North America
LZ = Chile, Paraguay, Uruguay.
http://www.jbfaq.com/article.asp?id=63

What is the 1 st stage and 2 nd stage dealer?

Similar Messages

Maybe you are looking for