What is the 2011 tab doing in my 2014

Hello, new to Numbers in Mavericks
There are many things new/missing to my view/understanding of number and how it was in earlier versions.
This question pertains to the 2011 below next to Joe's expensis.
If I click on it my expensis for 2011 takes over the screen. I am reluctant to do anything more, like hunt and peck for fear of loosing my expense date for 2011-2014.
I don't have the formula section like in the other version. In another Communiy Responce I was show a 'bubble' thing where the formulas were/are but have not been able to locate them my self.
If I had time to go through the WEB HELP I would, but it's tax time and I have to do my quarter filing and would like an explanation of these two questions.
Why is there a tab for my 2011 expense sheet
Where is the formula bar (and I know there is no formula bar in 3.1) buy where do sumit and create formulas.
thank you

Hello Jerrold Green1
you said:
Best bet would be to go back to Numbers '09. If you can, locate a backup document from prior to opening and editing in Numbers '13 and reopen it in Numbers '09.
Are you thinking go into Time Machine to before I opened Numbers 3.1?
Or open Numbers '09 and open the Numbers in 3.1.
Arrrgggh,
I entered time machine to before I installed Mavericks, and before I opened and used Numbers 3.1. Selected the file in Time Machine, it brought in expenses 2014 to the location of the original. Message said there is one there, keep both, replace or something else.
I said keep both.
Clicked to open, it opened in 3.1. I used Numbers 9 2.3 to try to open the file and it said I needed a newer version of Numbers to open this file.
I appreciate your suggestions and with out wanting to conqure the world at this point I am going to cut bate and continue to use Numbers 3.1 as best I can. I am not an accountant or a number person, I am a blues musician and this file has been helping me for 4 years.
I'll get though the tax dance and evolve into numbers if need be as the year goes on.
Again, thanks for your interest in helping.

Similar Messages

When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

Good day!
What is "place" supposed to mean – open, place as Smart Object, …?
What are the image’s Color Mode and bit depth?
Could you please post a screenshot with the pertinent Panels visible?
Does Window > Adjustments not raise the Adjustments Panel?
Regards,
Pfaffenbichler

The Categories tab on my iPad 2 will not pull up the categories and the Genius tabe does not pull up anything at all. Any thoughts on what to do?

on my iPad 2, when I go into the iTunes store to look at apps, the categories tab will not pull up the categories list and therefore stays on my previous choice everytime and the Genius tab does not pull up anything. Please advise on how to fix. Thanks.

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

HT1386 the summary tab DOES NOT EXIST ON THE NEW (AND HORRIBLE) ITUNES SOFTWARE!

the summary tab DOES NOT show up ON THE NEW (AND HORRIBLE) ITUNES SOFTWARE! where the heck is it???

I found it! After trying everything I could think of, I clicked on the left pane on iPhone and it opened it up. Yay!!! Why do things have to be so difficult??
Thanks anyway!!
I'm trying to add my Christmas playlist to my iphone but can't find where I check which playlists to synch. I don't like the new iTunes...
I have the left hand summary tab but I no longer get access to the icons across the top where I used to choose what synchs and what doesn't - Apps, music, etc. How do I get that back?
Help? Anyone?
Thanks!

The print tab does not work in mapquest

The print tab does not work in mapquest

You are on the right track to getting the printer installed regarding firewall but perhaps it has saved in a different port on your computer than can communicate correctly. Search Devices and Printers on the Windows 8 PC so you can pull up the printers' folder. Do you see the Officejet 6500 in here (meaning have you installed it again)? If you do not see it here, check your Print Server Properties and make sure the driver is not in here either, if so remove it. Restart the Print Spooler. Make sure you uninstall it completely and shut down the PC (see video link on how to uninstall HP drivers and restart the print spooler in Windows 8 if needed).
Remember to re-install the Full Feature Software and Drivers (for your OS and region) when the PC reboots. Try the test print and if it does not print:
1. Right-click on it and select Printer Properties.
2. Under the Ports tab make sure you see the printer's IP address here or a serial number. Sometimes the HP network -rediscovery ports can be tricky.
3. When the printer is high-lighted in this window, click Add Port.
4. Select Standard TCP/IP and follow the rest of the prompts in the Wizard to enter in the printer's current IP address.
5. Try to print.
If this does not help you, you may have other computer problems.
Have you ever installed a printer on this PC before?
What is the name of the anti-virus software you use?
Are you on a server, proxy, or other elaborate wireless setup?
Answer those questions for me please if the above information does not help you. I will do my best to assist.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

The fist tab does not finish loading - it keeps on loading and loading.

Since the latest Firefox update, the first tab does not load! It keeps on loading and loading. The first tab also does not want to close. '''So the first tab does not load and it does not close! '''All other tabs load and close. This happens when I open new tabs or when FF opens previous sessions.

On further attempts. I believe that my earlier post was not the correct description. What I have found is that when Firefox is closed with a web page open on its first tab, the next attempt to open Firefox will cause the symptoms that Lorraine was talking about earlier. After that back keys don't work. This is not an extension issue. I believe that this is a Firefox issue.

I accidentally deleted "empty cache" from safari drop down, what are the keystokes for doing it manually?

What are the keystokes for doing it manually? or how do you reload it to the drop down menu?

"Empty cache" is not available in Safari 6. (It's not possilble to delete that option from the Safari menu).
Several workarounds.
One. From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar.
Now from the Safari menu bar click Develop > Empty Caches
Or, from the menu bar click Safari > Reset Safari.
Select: Clear History (that empties the cache as well as deleting history. Deselect all the other boxes, then click Reset.
Unfortunately, Safar 6 omitted the empty cache keyboard shortcut.

What is the content Tab

Hi All,
We have just started using OBIEE as a business intelligence solution and I am in a process of creating RPD for our current data model. However, as I have gone through the official oracle documentation and various posts but I am still not sure what is the CONTENT tab of an LTS signifies logically?
Can anyone please elaborate upon this with a small example or direct me to a more precise documentation with an example?
I will be highly thankful.
Thanks,
Ronny

Thanks but it's not mandatory
and give only those who
want.
If it was possible for me, I will give you a little
bit of point because I'm now sure that you
can't use the tab content of an lts for a level based
measure ;-)
good evening and go Netherlands !

HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
Toks

Hi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden

What is the private tab.

What is the private tab which has mysteriously appeared on Safari ?

Nothing mysterious about it... Read here...
https://discussions.apple.com/message/23960680#23960680

I want to airplay from macbook pro to apple tv. What are the possibilities? Does it allow me to play movies or videos I access through the browser as well?

I want to airplay from macbook pro to apple tv. What are the possibilities? Does it allow me to play movies or videos I access through the browser as well?

Welcome to the Apple Community.
Only content in your iTunes library can currently be sent via AirPlay from your mac.

We have acrobat 11 and office 13. In word the Adobe tab does not appear in the ribbon

we have acrobat 11 and office 13. In word the Adobe tab does not appear in the ribbon

You have to update AA XI to work with AA 2013. You may also have to open the OFFICE tools and enable the add-ons. There is no tool in some of the OFFICE applications. You can check the list in the PDF Maker folder in Acrobat.

What is the flollowing code doing?

What is the flollowing code doing? What do the %2 %3 %4 %5 %6 %7 stand for?
java %COH_OPTS% -Xms1g -Xmx1g -Xloggc: com.tangosol.net.DefaultCacheServer %2 %3
%4 %5 %6 %7

%2 would need to be the path to the "cache-config.dtd" compliant configuration file.
%3 the interval in second to check the service status.
The rest would be ignored.
For Example:
java -server -Xms512m -Xmx512m com.tangosol.net.DefaultCacheServer coherence-cache-config.xml 5
Re: What is the flollowing code doing?
Thanks,
Everett Williams
Coherence Team
Edited by: ewilliams on Aug 26, 2009 2:36 PM

What is the reason of doing recording in BDC !

What is the reason of doing recording.....CAn we directly write the code ???

Hi,
OKCODE is nothing but the button clicks which you have performed while creating or changing a document.
You will be moving around in the transaction for creating a document and finally you click the save button. When click the save button then you will generally have the OKCODE as '=SICH'.
The OKCODE basically tells you which button you have clicked, as you are having so many options in the transaction to work around.
Thanks,
Mahesh.

What are the following entries doing in the following configuration file?

What are the following entries doing in the following configuration file?
Thank you
<include>coherence-pof-config.xml</include>
<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
<?xml version="1.0"?>
<!DOCTYPE pof-config SYSTEM "pof-config.dtd">
<pof-config>
<user-type-list>

<include>coherence-pof-config.xml</include>

<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
</pof-config>

<allow-interfaces> - The allow-interfaces element indicates whether the user-type class-name can specify Java interface types in addition to Java class types. Valid values are "true" or "false". Default value is false.
<allow-subclasses> - The allow-subclasses element indicates whether the user-type class-name can specify a Java class type that is abstract, and whether sub-classes of any specified user-type class-name will be permitted at runtime and automatically mapped to the specified super-class for purposes of obtaining a serializer. Valid values are "true" or "false". Default value is false.
<user-type-list> - The user-type-list element contains zero or more user-type elements. Each POF user type that will be used must be listed in the user-type-list. The user-type-list element may also contain zero or more include elements. Each include element is used to add user-type elements defined in another pof-config file.
<include> The include element specifies the location of a pof-config file to load user-type elements from. The value is a locator string (either a valid path or URL) that identifies the location of the target pof-config file.
http://wiki.tangosol.com/display/COH35UG/user-type-list
http://wiki.tangosol.com/display/COH35UG/pof-config
Thanks,
Everett Williams
Coherence Team

What is the 2011 tab doing in my 2014

Similar Messages

Maybe you are looking for