What is the $50 card givin by BB for pre orders

I'm a littlconfused on this and got 2 different answers
Is it A or B
A, iPhone 5 pre order 16gb is $200. I paid 50 down and got a $50 BB card. So my remaining balance is $150 to pick up the phone. I can use that $50 Bb card when I pick up the new phone and have to pay $100 out of pocket correct since I'musing the $50 card.
Or is it B
B, pre ordered payed $50 down got a $50Bb car. My balance is still 150 to pick up the phone and give BB the $50 card back as like a holding for the pre order and I have to pay $150 out of pocket
Help me out here to understand this
Thanks

B is closer, but neither is completely accurate. Here's how it works:
(Ignoring tax) the phone will be $200. You purchase a $50 gift card in order to do a pre-order. When you pick up the phone your total will be $200 for the phone, minus the $50 you pay with the gift card, for a balance due of $150.
Dan K. | Mobile Specialty Stores
Any opinions expressed in this post are those of
the author and do not represent Best Buy Co., Inc.

Similar Messages

What is the best card I can use for my MSI K9A2 CF Motherboard

I have been trying to read some threads, but I cannot find out any info on what would be the best card for my MSI K9a2 CF ver 1 motherboard. I would like to up grade but I don't want to buy a new system.
I was thinking about the an Nvidia 460GT 768mb
MSI K9A2 CF motherboard
AMD Phenom X4 940
Corsair XMS 6400 4gb
Corsair 750 watt power supply

Quote from: scottyb70 on 20-November-10, 23:21:53
My question is my Corsair has only one 12v rail at 60 amps. The MSI says it requires two. I don't think my powersupply would be able to handle this card?
That refers to 2 PCIe 6 pin power connectors not +12V rails on the PSU.
TX750W~PCI-Express Connector, 4 x 6+2-Pin

What are the video card requirements for running a 23" cinema display

What are the video card requirements for running a 22" cinema display(clear acrylic case) w/ a PC? My motherbaord is AGP. Thanks to anyone who can help.
Intel P4 3.0ghz Windows XP

Hi Lionel,
As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
A good place to start looking for answers is:
http://cubeowner.com/kbase_2/
Cheers!
Karl

I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this

I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac

Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.

What are the Trading Card Games for iPod touch that doesn't requires Internet connection?

What are the Trading Card Games for iPod touch that doesn't requires Internet connection? Suggestions, please.

Why not look at the apps and fine out?
The odds of someone here knowing that are slim to none.

What USB 3.0 card should I get for early 2009 Mac Pro so I can connect the Drobo 5D? They say get CalDigit or Sonnet. Anyone have preference or experience with reliability. Trying to find which is better.

What USB 3.0 card should I get for early 2009 Mac Pro so I can connect the Drobo 5D? They say get CalDigit or Sonnet. Anyone have preference or experience with reliability with this. I am running Lion and Trying to find which is better as I know from experience not all cards are created equal. Thanks in advance for your help!

yakov536 wrote:
High Point RocketU Quad USB 3.0 for Mac is working great for me. Had an issue with CD/DVD Drive which was resolved with most current driver downloaded from the support site.
Running Moutain Lion on Early 2009, mirroring two Seagate Go Flex 2TB USB 3.0 Drives. Installed in Slot 4.
Using it primarily with VMWare Fusion for Virtual Drives. Windows, Unbuntu and other OS running really well.
HPT Support was responsive and very helpfull using the WEB Portal under the product page.
I have some comments and a suggestion:
Have you tried your setup with a SD/CF combo card reader (like the Lexar or Kingston FCR-H63)? Does the card appear on the desktop when first plugged in?
Did you need to fool around with any kind of power issues in installing this card in the x4 PCIe slot of the MacPro?
Suggestion. Have you tried one of the fixed in this article to cure the BT issues in MacPro 3,1?
Good luck.
Henry

What is the best card to implement a protolo CAN

Hello
I am an insider in Labview.
I need implement a protocol by CAN.
The reading will be done through a board controlled by Labview.
The communications are basic, to test an electronic board
What is the best card to implement a protolo CAN?

Hi,
There are a lot of CAN cards that you can use with your application. I advise you to have a look at www.ni.com/can .
What kind of cards do you want to use ? PCI cards ? PXI cards ? What is the speed you want to reach ? How many ports do you want ?
As you can see there are a lot of parameters that depend on your application and what you want to do.
Best regards,

What is thes best 5.1 speaker kit for macbook pro 2011

what is the best 5.1 speaker kit for my macbook pro
thanks for help.

A 5.1 is considered a surround sound system, it's typically used in home theater systems, not computers.
A computer doesn't have the necessary electronics to produce the rich quality of sound that a 5.1 system can deliver, the PC 5.1's are just gamers gimmick cards, they too really don't have the necessary electronics or wattage for rich, full bodied sound.
Now I can tell you what works really well as a 5.1 system for iTunes, movies and such from your MacBook Pro, or anything really.
A Harmon Kardon 5.1 Home Theater.
It has 110 Watt speakers, 5 of them, and a 200 watt subwoofer that will make your heart thump in your chest.
You need only two things with this system, a optical stereo mini Toslink adapter and a optical Toslink cable.
You plug one inside your MacBook Pro (enable the optical out) and the other to the receiver and mess with the remote to enable theater mode from the computer for iTunes (takes stereo and makes it quad sound with separate bass)
For playing DVD's with 5.1, you enable the right 5.1 encoding, Dolby, ProLogic etc on both and the Mac passes the 5.1 through the system to the receiver.
For playing 3D games, you just pass the 5.1 through, the receiver handles the surround sound.
The important thing is setup, the listening point needs to be right in the center of the four channel speakers, the center is over your monitor or TV and the subwoofer is stuck in a free corner someplace, it's placement is unimportant, as long as it's in the room and not blocked.
Brother, you have system like this hooked up to your iTunes and tears will be falling from your eyes the music sounds so good. Makes you full hear the full quality of the iTunes bought music.
Will set you back a couple of thousand, but it's worth it. All the cables etc are color coded, easy to setup.
http://www.harmankardon.com/Pages/LocaleSelector.aspx
Hope that helps
(no comp)

TS2446 Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card an

Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card and the same.why???????

I have tried all those things I even updated the software to the new iOS system and it still did fix my problem.
What happened is that my garage band looks like it will open then it shuts down.
I have lot of important things on my garage band and I'm afraid that if I uninstall it deleting it then reinstalling it all my work on it will be gone and I can't have that happen.
Everyday I am hoping that when i go to open the app that is will work but it doesn't it gets ready to turn on then it shuts off , the app doesn't even open all the way and turns off.
I really hope I don't have to erase it.
It'll say it's ,lading my songs then it shuts down .
If I waited for the App Store to come up with an update for garage band should I wait till then to update my app so it doesn't get damaged . I don't want to erase it and all my data get erased . I figured if I wait for an update then my garage band will reset itself but won't delete my data. I'm not sure if that will help. Is there anything you or anyone else might know that can help me with this matter ?
Thank you
Simachyahi

What's the best logic reverb to use for trumpets and sax

what's the best logic reverb to use for trumpets and sax.

The lower transmit frequency limit is in there to make the device meet FCC regulations.. that is a regulation imposed of US regions and, to a lesser extent, Latin american regions that border with the US.
In addition, you'll be pleased to know that the N900 will not use certain European WiFi channels if a) the sim card is removed or b) the phone has a sim card but is OUT of 3G coverage.. again, to make the device meet FCC regulations.. (seriously.. when you go out of 3G coverage, the kernel reports it is switching from EU wifi to US wifi!!)
Let me put this into perspective..
From: http://www.nokia.com/results/Nokia_results2009Q3e.pdf
Nokia sold 3.1million handsets in the US 2009 Q3
Nokia sold 27.1million handsets in Europe during the same period.. That is 9 times as many.
The USA has its OWN firmware
and yet ALL versions of the firmware (including the UK specific one) are crippled to meet the requirements of a region that produces the lowest sales figures by a factor of 3 (Latin America produced 9.7 million units in 2009Q3)
Why the HELL are we suffering because of US restrictions..
That's like saying you can't use bluetooth because it isn't allowed on the Christmas islands.. (it is allowed.. not picking on you, Christmas Islands, but you are small!)
If the FCC wants a phone that doesn't allow broadcasts on sub 88Mhz frequences, and doesn't want certain Wifi channels to be used, the ALTER THE US FIRMWARE..
What next, BMWs have with left hand steering in the UK because the US drives on the Left?
Phillips TVs that only work on 120V because the US uses 120V..
I don't give a **** what the FCC say.. I'm not in the US and I have my own european and UK legislation to adhere to..
For a company that INSISTS on having a billion regional firmware versions, they don't appear to be able to get that right either!!! The UK version lacks UK specific restrictions such as the ability to us UK frequencies for wifi and FM transmission!!
Crazy and very very irritating

What are the Non SAP data sources supported for Analysis workbooks?

AO 1.4 SP6
BO 4.1 SP2
What are the Non SAP data sources supported for Analysis workbooks?
Thanks.

HANA is a data source (which could contain non-SAP data)
For other Excel front-ends that may connect to "non-SAP" data look at Live Office or Power BI by Microsoft - see Excel and Power BI connectivity to SAP BusinessObjects Universes | Power BI

What are the steps to make it seamless for a customer to use the install program and then use the installed program?

I wrote an install program (.exe) that is downloaded from a website. When run, it 1) leads a customer to browse to a directory, and 2) copies files (.exe, .dll, etc.) from a website to that directory. When I run, the installed program works.
What are the steps to make it seamless for a customer to use the install program and then use the installed program?
bhs67

This site https://msdn.microsoft.com/en-us/library/vstudio/2kt85ked%28v=vs.110%29.aspx provides a basic description of the Visual Studio Windows Installer.
Near the bottom of the page is "You can unlock all the features of InstallShield by paying to upgrade to the full version of InstallShield." Where do I find info that describes the differences between the "free" and the "full"
versions?
bhs67
Hello,
The default feature does support the task for your requirement, so there is no need to pay for the other features unless you want to use some feature which is not free.
In addition, as this thread
InstallShield LE not available with VS 2012 RTM? shared, even through there is a link to InstallShield LE in the New Project dialog under Deployment solutions, but it belongs to third-party that I would recommend you consider posting this issue
at the following forum to get supports about InstallShield.
http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What are the settings in i phone 4s for connecting internet in mobile data ?

what are the settings in i phone 4s for connecting internet in mobile data ?

Did you ever get a reply to this. I have the same problem. I have the same problem when even when I reply to an email... no photo shows up in my new reply message. The only way I have figured out is to use the "forward" option.
But this still does not solve the problem when people email me back... I have no idea what photo they are speaking of. Instead of a photo... there is a <photo name of some sort>.
Let me know if you ever hear on this one.
Many thanks.

What is the need of creating partner functions for sales document type.

Hi SAP (SD-GURUS),
Actually we create partner functions before creating customer ex: sold to party, ship to party, bill to party, and payer.
These partner functions are going to be copied into sales order while processing sales order.
Again what is the need of creating partner functions for sales document type.
Thanks&Regards
sreenivas peruru

There are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
Hope this helps...
THanks,
Jignesh Mehta

What are the different types of Wage types for Indian Payroll...??

Dear Frnds,
What are the different types of Wage types for Indian Payroll that we have to configure it...?? and please list wage types that we have to configure it for different types of TAX and Allowances in India payroll.
And also please list Info types numbers for different types of TAX and Allowances.
Many thanks in advance.
Regards
Ahmed.

for the list of the wage types you can check V_512W_D for country grouping 40 Inida
for Tax related info please search the forum or search google you will get lot of inputs

What is the $50 card givin by BB for pre orders

Similar Messages

Maybe you are looking for