What is the ability of FCP X without hang-up?

I am using Mac Book Pro with retina display OS X Mavericks 10.9 (Processor: 2.3 GHz, Intel core i7, Memory: 8 GB 1600MHz DDR3).  In one project, approximately upto how many GB of HD content can the FCP X  take the load without the color wheel indication of hang-up? Can I go upto 100 GB of HD content to work smoothly?  Thanks.

success1975 wrote:
In spite of the huge size of the video, can it work smooth in FCP X without hang-up OR what factors of my specification could limit the smooth working.
Suggestion: Download the 30 trial and  find out first hand.
Limitations on processing your big clip are goingto be more a function of your hardware than FCPX.
Russ

Similar Messages

  • What is the use of production order without material?

    Hi gurus,
    can anyone plz tell what is the use of production order without material?
    n steps involve to perform this task?

    Dear amnpp,
    It's widely used for capturing the rework activities(components and activity cost),both for final rework and inprocess rework
    activities.
    Check these links,
    Rework order manually (not Trigger)
    rework order
    Rework Order Steps
    Re: Coustomization order type for Rework
    Regards
    Mangalraj.S

  • What is the use of with and without marker update?

    what is the use of with and without marker update?

    Hi,
    Marker Update Updates the stock values and NO Marker does not.
    Generally BX upload has to be compressed with MU and BF(and UM) delta init has to be compressed with NO MU because Stock was updated with BX. And delta loads of BF and UM has to be compressed with MU  because these brings new Material movements which will has to give effect to stock.
    With rgds,
    Anil Kumar Sharma .P

  • What are the Grid Control basic features  (without the licensed packages)

    Hi everyone,
    I'm all new to OEM Grid Control and I've been asked to write a document that sums up and explains all the OEM features (Database ones only).
    The reason I created this thread is because I have a problem doing that. Indeed, Oracle insists on their licensed packages in their documentation and doesn't make very clear what's available without any of those packages.
    I've been looking for some other documentation than Oracle one but without much success.
    I really have to know the features available without those packages because I've been asked to determine whether or not Diagnostic Pack, Tuning Pack and Configuration pack are necessary (i.e If we have to purchase the licenses)
    So could anyone tell me precisely what's available without those packages or link me some sources I could use?
    Thank you very much in advance
    Olivier

    Hi Erika,
    Unfortunately, it appears to be true: to be able to get notifications and alerts, you need to have the Diagnostics Pack license. Reference the following document: Oracle Enterprise Manager Licensing Information 10g Release 4 (10.2.0.4.0) Chapter 2: Enterprise Database Management:
    The Diagnostics Pack includes the following features, which you can use after purchasing a license for the Diagnostics Pack.
    Automatic Workload Repository
    Automatic Database Diagnostic Monitor (ADDM)
    Performance monitoring (database and host)
    Event notifications: notification methods, rules, and schedules
    ...In the document that you have cited, I think that "standard" and "out of the box" simply mean that Oracle has these alerts and notifications preconfigured for you when you install the software. But to actually use them, you need to have the appropriate license.
    Regards,
    John P.
    http://only4left.jpiwowar.com

  • What are the advantages  using internal tables without headerline.

    hi,
    i have a doubt,please clarify.
    data:itab like <databse table> occurs 0 with header line.
    or
    data:itab like <databse table>occurs 0,
    wa like line type of itab.
    in above two cases , in my view  no difference.
    in first case there will be one workarea will be created with same name itab,
    in second case we are explicitly creating work area.
    ok.
    here my doubt is in what cases it is madatory to create  internal table with  explicitly work area?
    thank in advance.
    venu

    Hi,
    It is a good practice to define a structure for your internal table. Then declare an internal table with the defined structure. Using a workarea to access to the internal table.
    TYPES : BEGIN OF struc_tab,
                      rec1(10) TYPE c,
                  END OF struc_tab.
    DATA : itab TYPE TABLE OF struc_tab,
                wa_itab LIKE LINE OF itab.
    There is no differences, just that we're avoiding declaring using 'With Occurs 0' or 'With Header Line' and in some cases in oo programming, headerline are not allowed.
    Regards,
    Loo

  • What is the workflow from FCP to Compressor to preserve 24p frame rate?

    I just exported my 108-minute project from FCP to Compressor (v3.0.3). I used the MPEG-2 "setting" in Compressor. My end result was a Compressor file whose frame rate is at 29.97. When I import this new compressed file into DVD Studio Pro, the DVD project defaults to 29.97.
    I'm a little unsure of how this works. I have an FCP project set at XDCAM EX 1080p24. I'd like to preserve 24 frames per second for a "film" look in the final product, which right now is ultimately a burning of a DVD using DVD Studio Pro.
    Should I be using a different setting in Compressor to achieve 24 frames per second? Am I missing a switch to toggle in Compressor? Or FCP? Or DVD Studio Pro? Or... is my final DVD product, which is listed at 29.97, actually preserving the 24 frames and I'm just seeing things incorrectly? (It looks video-ish.)
    thanks,
    Shanked

    Hi Jerry,
    To respond to your info request: my "settings" indicate my Editing Timebase is 23.98.
    Moreover...
    Editing Timebase: 23.98
    1920x1080 HDTV 1080i 16:9
    Pixel Aspect Ratio: Square
    XDCAM EX 1080p24 VBR 35Mb/s
    Quality: 100%
    Audio: 48khz
    Audio Depth: 16bit
    Indeed, to achieve a film look I undertook the following steps in production and post...
    shot 24p
    shot with a Letus Adapter and Zeiss lenses
    created an appealing depth of field where possible
    avoided various "videofying" shots, like fast pans and so forth
    crushed the blacks in color correction
    used Nattress and adjusted the S curves in certain areas
    I'm just wondering if I missed a step somewhere when it came down to designating the frame rate in Apple Compressor. When I saw the 29.97 frame rate designation in DVD Studio Pro, it surprised me. And then watching my movie on DVD (which is always a slightly difficult experience) I was really feeling like I was seeing an undesirable crisp video-ish feel that I hadn't seen before outputing to DVD.
    obliged for the help,
    Shanked

  • What is the alternate to this? without trigger & insrt...value(seq.nextval)

    create sequence myv ;
    drop table t33;
    create table t33
    (c1 number default myv.nextval);

    Perhaps this, though the downside is it's rather more bulky than a generated number, and less human-readable:
    SQL> create table t33
      2  (c1 raw(16) default sys_guid(), c2 varchar2(30));
    Table created.
    SQL> insert into t33 (c2) values ('Banana');
    1 row created.
    SQL> select * from t33;
    C1                               C2
    2571E04E2E3F59BFE040007F01001E0C Banana
    1 row selected.

  • How can I grant users the ability to pause/resume printing without a "print operators group" password.

    Greetings,
    We are running 10.8.5 on 30 machines in an active directory environment (graphics lab). The clients are experiencing a persistant error when pausing or resuming print jobs. Each time something is paused, it requires an administrator password to resume the job. Administrators are not always present so designers are locked out of all of the printers until we come in (or remote in) to authenticate.
    I spoke with Apple today and they said they would not support active directory accounts and that the account must be edited by the department that created the account because the restrictions come from the Active Directory account preferences.
    On the other hand, I ALSO read that I can edit this in the CUPS interface or modify it with the terminal command below, locally.
    dseditgroup -o edit -u admin_name -p -a user_name -t user _lpadmin
    "dseditgroup" adds the user_name to a group (in this case, _lpadmin).
    And admin_name is the name of your administrator's account.
    a) Must this be modified on the Active directory account or CAN I modify this on the local machine via CUPS or terminal?
    b) If so, how would I grant users the ability to resume printing without an admin password?
    c) If not, exactly what must be modified in the active Directory account to allow pause/resume without an admin password.
    I have seen a terminal command that adds users to the print operatiors group (Ipadmin) and I have seen some info on editing the CUPS interface, If i must edit the CUPS interface to allow this, can anyone point to detailed instructions on how to make this change.
    I also saw info on editing the CUPS interface but the suggestion lacked details as to how and how to return to default if it does not work.
    I also saw a post with these suggestions below but without detail as to how one would carry this out.
    /etc/cups/cupsd.conf
    # All administration operations require an administrator to authenticate...
    <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
    AuthType Default
    *#Require user @SYSTEM*
    *Require valid-user*
    Order deny,allow
    </Limit>
    # All printer operations require a printer operator to authenticate...
    <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    *#Require user @AUTHKEY(system.print.operator) @admin @lpadmin*
    *Require valid-user*
    Order deny,allow
    </Limit>
    /etc/authorization
    +The system.print.operator key is new to Snow Leopard and seems to control resuming and pausing a printer queue among other things.+
    <key>system.print.admin</key>
    <dict>
    <key>allow-root</key>
    <true/>
    <key>class</key>
    <string>user</string>
    <key>group</key>
    <string>staff</string>
    <key>shared</key>
    <true/>
    </dict>
    <key>system.print.operator</key>
    <dict>
    <key>allow-root</key>
    <true/>
    <key>class</key>
    <string>user</string>
    <key>group</key>
    <string>staff</string>
    <key>shared</key>
    <true/>
    </dict>
    I have read all posts on this subject and I still am not clear on how to proceed, please assist.
    Thanks in advance,
    V

    Hello again.  For AD environments you can run the following command on each workstation:
    sudo dseditgroup -o edit -n /Local/Default -u localadmin -p -a "Domain Users" -t group _lpadmin
    This command assumes you are typing this interactively on the machine.  Obviously change localadmin to the Mac's local admin's name.  When running you will be prompted for password twice.  Once to elevate permissions (sudo) and once to validate you are localadmin.
    If you are using Apple Remote Desktop (or JAMF or other management suite), you can push this command out while embedding the localadmin's password. 
    sudo dseditgroup -o edit -n /Local/Default -u localadmin -P yourpass -a "Domain Users" -t group _lpadmin
    Please note, if your password uses special characters (/-\) this may fail over ARD.
    In Mavericks, AD groups are cached once they are referenced.  If you are dealing with a lot mobile users (laptops) you might want to replace Domain Users with everyone
    R-
    Apple Consultants Network
    Apple Professional Services
    Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

  • What is the use of Alternative Calculation Type =2 and 4

    Dear Friends
    In pricing procedure in gross value, Net value for Item and Net value has Alternative calucation type is 2.
    What is the use of it?
    Without using it these value line are also fetching net value then what is the work of it. Please give me detail information with its effects in pricing condition tab page in sales document.
    Thanking You
    Arun

    Arun biswal,
    Correct Biswal. We have at varoius stages within Pricing procedure the "net value" which is calculated. Not only the alternative calculation type "2" is used if you notice carefully they are stored as subtotals at various levels.
    For Ex Gross Value  --> Subtotal =1 --> Calc type = 2
    similarly for Net value for Item --> Subtotal =2 --> Calc type = 2
    Net value 2 --> Subtotal =3 --> Calc type = 2
    See, these are used to calculate the net value at various levels in pricing. The calculation Type has got a set of routines that will facilitate us in pricing. SAP has provided certain clauclated formulas or routines to facilitate us during calculation within pricing . Here the "2" is used for calculation without tax and store it as subtotal and display it or use it for further calculations.
    We can use this "netvalue" amount for further calculations. It is used for clarity purpose when you issue a statement to customer. (like Confirmation order) at various levels like discount amt involved, Freight involved, Rebate amount invloved.....
    Even without this Calc type or using sub total u can proceed....
    Finally we have  TOTAL  --> Subtotal =A --> Calc type = 4
    In the above line we have Calc type as 4, which means when you use TAX this calc type is used .
    Routines are used to facilitate your process....
    Regards
    Sathya

  • What is the best way to import pictures from iPhoto without compression?

    I'm trying to create a slide show using Final Cut Pro. No, I'm not interested in using iDVD slide show function because it doesn't allow me to do a whole lot. I would like to add titles and music for certain segments with video inserted here and there.
    Anyway, when I used the slide show function in iPhoto, exported it out as a quick movie file, and then imported it into Final Cut Pro, I noticed a significant downgrade in quality of images. It obviously looks different from when I play the slide show in iPhoto. What would be the best way to import pictures into Final Cut Pro without any compression?
    Thanks in advance.

    I only see Share > Export.
    Some versions of iPhoto work that way -it's just Apple moving things around.
    what's the difference between exporting it from iPhoto then import it into FCP vs. just importing directly from FCP?
    Your first post mentioned exporting a slide show from iPhoto -I assumed that is where your images are stored.
    I do not want to import pictures one by one...
    You don't have to. iPhoto will let you select as many as you want, or if the images are elsewhere, you can also select multiple files from FCP's Import dialog.
    ...and stick them together manually.
    Editing is an art and involves some effort on your part. It is not an automated process. This method opens up far more possibilities, access to filters and color correction and the opportunity to use Motion for even more sophisticated animation.
    But, it only allows me to export it as 720 x 480. The original size of my photos is 3872 x 2592. Is there any way I can create a quicktime file in the original size?
    You should be aware that 3872 x 2592 is not a standard pixel aspect ratio that is used in video. The images will be resized to the Sequence settings that you set up in Final Cut Pro.
    I have never used iPhoto to make a slideshow before, but I just gave it a try and was able to export one with the images in their native size, simply by typing the pixel dimensions into the boxes in the dialog window:
    I don't have PhotoMagico myself, but it comes highly recommended by several of the forum regulars.
    Perhaps one of them will see this discussion and help with your last question.

  • What is the best iMac setup without spending a fortune?

    Okay so I am looking to purchase a new iMac. I do a little video editing and a decent amount of photo editing and music editing. I will probably do some gaming also, but I know most of the hardware upgrades don't really affect the gaming ability. So here is my question. I want to get a 27" iMac, and I'm wondering what are the best upgrades for the money? I want the best performing system possible without spending too much money. Basically, what system setup (Ghz, RAM, drive type/size, i5 vs i7, etc) will give me the most noticeable difference in performance. I don't want to invest $200 more for i7, $200 more for bigger RAM, etc if there is only going to be a very minor performance improvment. I hope this all make sense, and ANYBODY's help is MUCH appreciated!!! Thanks guys!!!!

    I would say any of the 27" iMacs would be a great solution. If you tend to keep computers for 4-5 years then it's wise to invest in the most power iMac today. In 4 years you will have a 18, 16, 15 and a 11 year old and you can be sure their interests will change. In that case I'd probably opt for the i7 CTO iMac with a 2TB HD. Do not buy additional RAM from Apple, buy that from reputable vendors such as OWC (www.macsales.com) or Crucial. Upgrading RAM is incredibly simple taking less than 10 minutes to do. I would upgrade the RAM to 12 or 16GB. I would stay with the base graphics card and consider getting the SSD option which will enhance speed.
    If your habits are to keep computer for 1-2 years and then recycle them then either of then I'd probably opt for the base 27" iMac with the same HD noted above and RAM recommendations.

  • When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich/

    When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich?

    The reason your applications do not work in Lion/Mountain Lion is that they were written for the older PowerPC CPU that all Macs used up to 2006.  When Apple made its transition to the Intel CPU, they licensed software that they included in all versions of OS X (from Tiger to Leopard and optionally, Snow Leopard) called Rosetta.
    Rosetta miraculously allows PowerPC applications to work on the Intel processor transparently; you do not know it is even present.
    The problem is that after 6 years of the transition, Apple's license to use the underlying software expired for OS X Lion and all version thereafter (and it is doubtful that the current owner of the software, IBM, would relicense it, even if Apple were inclined to do so).
    So you do not have to accept recriminations from others for previously using Rosetta without even knowing it was present and running!
    So for those of use that need to upgrade to Lion/Mountain Lion, I have offered the option to install Snow Leopard (with Rosetta) into Parallels 7:
                             [click on images to enlarge]
    And now Mountain Lion:
    If you are unable or unwilling to update your inventory of PowerPC software, this solution offers you an alternative for not more than the $29 cost of Snow Leopard and $79 cost of Parallels (cheaper via internet sources).
    Full Snow Leopard installation instructions into Parallels 7 are here:
    http://forums.macrumors.com/showthread.php?t=1365439
    Assistance with the installation process is available on this linked forum.

  • I have replied to you three times now without reply. I DID NOT authorise a payment of £9.99 for NowTV. What is the solution to getting my money refunded. I think you assume I will go away after being Ignored. No I will not go away. I find now that you hav

    I have replied to you three times now without reply. I DID NOT authorise a payment of £9.99 for NowTV. What is the solution to getting my money refunded. I think you assume I will go away after being Ignored. No I will not go away. I find now that you have DISABLED MY APPLE ID. Is this a punishment you use to anyone who takes up a stand against charges being made unauthorised on their account?. Please tell me why you have disabled my account. When will my account be restored? If not when will you refund ALL my purchases made to APPLE/ITUNES? I can then move on to another brand and hopefully better customer service. After reading articles regarding APPLE ID DISABLED it appears common practice from your company to DISABLE anyone's account if they question unknown charges. Please reply with your intentions regarding  the unauthorised payment and the DISABLING of my account.
    David Forrester.
    Sent from my iPad
    On 18 Mar 2014, at 09:20, iTunes Store <[email protected]> wrote:
    Follow-Up: 319042795
    Hello again,
    I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assistance.
    Sincerely,
    iTunes Store Customer Support
    http://www.apple.com/support/itunes/ww/
    Dear David,
    Welcome to iTunes Store Customer support.
    I understand that you have been charged an additional 9.99 GBP for a purchase that not authorized. I know how eager you are to know more about this purchase and I am happy to look into this for you.
    David, the purchase worth 9.99 GBP was for a day pass from "NOW TV for Apple TV." To review your iTunes Store account's purchase history, please follow the steps in this article:
    iTunes Store &amp; Mac App Store: Seeing your purchase history and order numbers
    http://support.apple.com/kb/HT2727
    Please reply to this email and let me know if this purchase was unauthorized.
    Thank you for being an iTunes Store customer. Have a great day!
    Sincerely,
    iTunes Store Customer Support
    http://www.apple.com/support/itunes/ww/
    Lang_Country: en_gb
    User Storefront: UK
    Concern Type: Problem Not Listed
    Web Order #:
    Content Title: NOW TV Day Pass
    Provider Name: BSkyB
    Track IDs: []
    Purchase Date : 2014-03-16 12:33:48 Etc/GMT
    Purchase Device : Apple TV
    Comments : I am being charged for what is listed plus another _9.99 for Apple TV pass. Did not authorise this _9.99 charge and not sure what it is exactly.
    <Personal Information Edited by Host>

    This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
    Unfortunately no one here can access your support history. You must respond to the emails directly.

  • What is the best way to open emails and attachments without using wifi?

    For I-phone and I-pad, what is the best way to open emails and attachments without using wifi?  I turned off wifi in my settings but my boss thinks there may be another way and a better way to use something else instead of wifi.  Any help would be appreciated!  Thank you!

    Thanks!  That is a very good question you post.  My boss asked me that and I am assuming that he is having issues with using wifi wherever he is at.  My boss is the kind of person that when he asks something you look into it and ask him no questions...he's the only one asking questions!  But thank you for your response I will tell him the information you told me and hopefully that will help!

  • So I have an iPad with the smart cover, and it's usually supposed to turn on the iPad when u open it, but it's no doing that for me. Nor is it turning off without pressing the button. What is the meaning of this?

    So I have an iPad with the smart cover, and it's usually supposed to turn on and off the iPad when u open it and close it, but it's not turning on for me. Nor is it turning off without pressing the button. What is the meaning of this?what caused it to be this way? Is there someway that I could fix it?

    Wait a sec did this just start?
    You set up the smart cover function in settings (you did that, right?) so, if you did that and it's failed you make an appointment at your nearest Genius Bar now.

Maybe you are looking for